|
| 1 | Demolition of cement concrete (un reinforced) as in roofs of existing water proofing treatment of any type and any thickness, complete all as specified and as directed. |
| 2 | M & L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed. |
| 3 | M&L forapply bituminous primer confiriming to IS -3384 @ 0.40 Kgs/ Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS -702@ 1.20kg/ Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrane will be 3 kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150 mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20kg/ Sqm and blinded with fine sand in dry condition @ 0.50 kg/Sqm dusted over the bitumen coat.Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer. |
| 4 | M&L for 15 mm thick cement plaster in cement mortar 1:3 on roof surfaces finished even and smooth without using extra cement, including mixing of water proofing compound for Accessible roof/Non Accessible roof complete all as specified and as directed.NOTE: Water proofing compound shall be measured and apid separately. |
| 5 | Supply only water proofing compound as approved by GE. |
| 6 | S&F in repair Rotational moulded polyethelene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, capacity of water tank 1000 Ltr including dismantling & removing old tank from site all as specified & directed by Engr-in-Charge. |
| 7 | S&F Ball brass valves 20mm, high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed in repairs complete all as specified and as directed. |
| 8 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed. |
| 9 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed. |
| 10 | S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified and as directed. |
| 11 | S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20 mm bore complete all as specified and as directed. |
| 12 | S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm bore dia complete all as specified and as directed. |
| 13 | PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in floors 75mm thick complete all as specified and as directed. |
| 14 | M&L for factory made glossy finish coloured chequered cement concrete tile size 30cm x 30cm x 25mm thick machine pressed set & jointed in neat cement slurry as in floors, joint fill up with white grey cement & pigments over and including 15mm thick screed bed with cement mortar 1:4 complete all as specified and as directed. |
| 15 | Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11sqm but n exc 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 16 | M&L for Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 17 | Dismantling floor , hearth or wall tiling including cement mortar bedding complete, removing serviceable tiles to store and rubbish off the premises, all as specified & directed. |
| 18 | S&F Glazed ceramic tiles (coloured) on vertical surfaces of of size 450x350x7/350x250x7mmthick set and jointed in neat cement slurry over 10mm thick rendering in CM 1:4 and pointed in coloured cement to match complete all as specified and as directed. |
| 19 | Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 20 | M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even andsmooth mixed with water proofing compound complete all as specified and as directed. |
| 22 | Demlition of brick work or stone boulder masonry built in cement mortor including all quoins arches pillars etc complete all as specified and as directed. |
| 23 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius in CM 1.6 complete all as specified and as directed. |
| 24 | M&L for half brick work with sub class \"B\" brick straight or curved on plan exc 6m mean radius in CM 1:4 complete all as specified and as directed. |
| 25 | M&L Prepration of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 1mm wall care putty including complete removal of existing treatment complete all as specified and as directed. |
| 26 | M & L two coat of cement base paint over newly plastered surfaces of wallincluding preparing surfaces complete all as specified and as directed. |
| 27 | Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete angle as in cup boards (40X40X5mm) conforming to FE-410-W Gde-E-250 quality -A) complete all as specified and as directed. |
| 28 | Dismantling of CGI/AC/ any otherssheet of any description incl ridges etc complete all as specified and as directed. |
| 29 | Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with selftapping screws complete all as specified and as directed. |
| 30 | Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with selftapping screws complete all as specified and as directed. |
| 31 | Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,complete all as specified and as directed. |
| 32 | S&F non asbestos fibre Cement board ceiling 4mm, thick in 605mmx605mm panel designed ceiling conforming to IS-14862 type B category threeincluding snap grid frame work, hold fast, suspenders fixed in repair complete all as specified and as directed. |
| 33 | S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed. |
| 34 | S & F powder coated (of approved colour ) aluminium (minimum thickness of powder coated 50 micron ) as in sliding shutter of windows, ventilatorsopenable/ louversfixed/slidingtype without sash bars, aluminium section not less than 0.55 kg/m including nessery jointing,cleats,glazing clips,rubber,neoprene packing, aluminium snap beding,screws, rolling for smooth moving & locking arrangement, etc fixed to wall including 3 mm thick sheet glass, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge. |
| 35 | S &F Aluminium deco grill of 5 to 6mm dia size of mesh not exe 7.5cm in either direction includingAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge. |
| 36 | Excavating over areas, n.exc 1.5 m deep and getting out in soft/disintegrated rock complete all as specified and as directed. |
| 37 | Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 38 | Use and waste of form work to side of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specifiedand directed. |
| 39 | M&L for providing RCC nominal mix type B-0 (using 12.5 mm graded crushed stone aggregates),1:2:4 as in footing, foundation, beams, plinth beams, base for columns and mass concreteetc complete all as specifiedand directed. |
| 40 | M&L for providing RCCnominal mix type B-0 (using 12.5 mm graded crushed stone aggregates),1:2:4 as in Beams, cantilevers, ressummers, lintels over 1.5m span concreteetc complete all as specifiedand directed. |
| 41 | M&L for providingRCC nominal mix type B-0 (using 12.5 mm graded crushed stone aggregates),1:2:4 as in columns and pillars etc complete all as specifiedand directed. |
| 42 | RCC nominal mix 1:2:4 type B-1(using 20 mm graded crushed stone aggregates) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm thick plastering with water proofing compound as directedlaid/made to slope as in RCC roof surfaces complete all as specifiedand directed. |
| 43 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 44 | Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 45 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 46 | M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treatedcomplete all as specified and as directed. |
| 47 | All as per item no 46.00 here in before but glazed and skeleton shutter with sash bar for glass / wire gauge complete all as specified and as directed. |
| 48 | S&F Aluminum anodised bolts barrels tower bolts with bright bolt 150mm long complete all as specified and as directed. |
| 49 | S&F Aluminium alloy ,anodised,sliding door bolt300 mm length with hasp,staple (bolt type) andfixing clip of sheet,cast or etruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed as specified complete all as specified and as directed. |
| 50 | S&F Alunminium handle cost type 150mm long oval type complete all as specified and as directed. |
| 51 | M&L for preparation of new woodensurfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimer complete all as specified and as directed. |
| 52 | M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified and as directed. |
| 53 | S&F vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection P trap etcto drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc complete all as specified and as directed. |
| 54 | S&F 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long complete all as specified and as directed. |
| 55 | S&F pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm complete all as specified. |
| 56 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 57 | S&F Towel rail 600mm long aluminium tower bolts 20mm D type complete all as specified and as directed. |
| 58 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 59 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed etc complete all as specified and as directed. |
| 60 | M&L Prepration of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 1-2mm thick wall care putty includingover a coat of primer complete all as specified and as directed. |
| 61 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over a coat of wall care putty over new/old surfaces. |
| 62 | M&L for 25mm dia Stainless Steel curtain rod fixed in repair with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and as directed.Note : The cost of brackets and knobs is deemed to be including in the quoted rate.Nothing extra shall be paid on this account. |
| 63 | S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 500 Ltrcomplete all as specified and as directed. |
| 64 | S&F Ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and as directed. |
| 65 | 40 mm thick flooring in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) surfaces finished even and smooth using extra cement complete all as specified and as directed. |
| 66 | S&F wash hand basin of size 550 x 400 mm vitreous China white padestel type including brackets brass chromium plated waste coupling & PVC waste pipe of 32 mm dia etc complete all as specified and as directed. |
| 67 | S&F Towel Ringfixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and as directed. |
| 68 | Mild steel framed work such as grills, gratings, angle ironetc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work including welding conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 69 | Providing and fixing 30mm thick factory made PVCdoor shutter consisting of panel of Hollow PVCProfile of 24mm thickness, consistingof frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottomrails and two 19mmx19mm MS tubes inserted horizontallyinside the hollow profile section at an equal distance from top and bottom of door and fixed withhollow profile section using 3mm thickPrelam PVCsheet using screws. Hollow PVCprofile shall belipped with 10mm (5mmx2) thickx 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mmthick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etccomplete as per direction of Engineer-in-Charge,manufacturer\"sspecification and drawing, complete all as specified and as directed. |
| 70 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings, complete all as specified and as directed. |
| 71 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed. |
| 72 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 73 | Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed. |
| 74 | Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repair complete all as specified and directed. |
| 75 | Shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union complete all as specified and directed. |
| 76 | Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed complete all as specified and as directed. |
| 77 | Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered \"Hot\" & \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed. |
| 78 | M&L for wall mixer, brass, chromium plated,fancy type, with capstan head handles screwed down high pressure, withlettered \"hot\" and \"cold\", including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, complete all as specified and as directed. |
| 79 | S&F Solid PVC Wall Lining ( Wall Panelling) consisting of 5mm thicksingle side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & directed by Engr-In-Charge |
| 80 | Mild steel work as in rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed. |
| 81 | 100 mm bore cast iron soilwaste and vent pipes, sand cast, in any length with or without ears, with cement joints but fixed in walls, complete all as specified and as directed. |
| 82 | S & F 75 mm bore cast iron, soilwaste and vent pipes, sand cast, in any length with or without ears, with cement joints fixed on walls, complete all as specified and as directed. |
| 83 | S & F Cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) for 100mm bore of pipe,complete all as specified and as directed. |
| 84 | S & F Cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) for 75 mm bore of pipe,complete all as specified and as directed. |
| 85 | Machine pressed rubber moulded manufactured/compacted by vibrating table method precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand including sand cushion complete all as specified and directed. |
| 86 | Machine pressed rubber moulded manufactured/compacted by vibrating table method precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment and joints filled with sand including sand cushion complete all as specified and directed. |
| 87 | Surface excavation for hard/dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed |
| 88 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed. |
| 89 | M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 90 | M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and leveled in layers not exc. 15cm thick, watered and well rammed to a true surface, complete all as specified and directed. |
| 91 | Plain cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate as in roof kerbs or mud stops, coping etc including weathering, slightly rounded or chamfered on edges complete all as specified and as directed. |
| 92 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
