|
| 1 | Supply and fix in repairs existing false ceiling boards with HPSC 6 mm thick, non asbestos fibre cement building boards white colour designer type ready to fix, fixed or laid/ inserted to timber/GI/Aluminium framework with screws, as in ceiling complete all as specified. |
| 2 | Supply and Fixing in repair forAnodised aluminium snap grid of Size 600X600mm frame work for false ceiling with HPSC 6 mm thick Non asbestos fibre cement building boards white colour designer type ready to fix ,fixed or laid/ inserted to timber/GI/Aluminium framework as in Ceiling with including proper hanging arrangement after dismantling wall and celling board (fibre, pulp, insulation,glass etc) any thickness including cover fillets complete all as specified and as directed. |
| 3 | Supply and fix perforated particle board wall panelling for insulation/ sound proofing, board having size 60 x 60cm and 12mm thick fixed with nails to timber frame work or with staples on snap grid including dismantling existing wall or ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets, any thickness, complete all as specified and directed. |
| 4 | Fixing only perforated particle board wall panelling for insulation/ sound proofing, board having size 60 x 60cm and 12mm thick fixed with nails to timber frame work or with staples on snap grid including dismantling existing wall or ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets, any thickness, complete all as specified and directed. (Board retreived from item No 03 will be reused for the work) |
| 5 | Material and Labour for 2nd class hardwoodPlain fillets. square, rectangular or triangular in section Exc 13 Sqcm & n exc 25 Sqcm in area, clean sawn, secured with nails or brads.,including dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section(unframed )the Complete all as specified and directed. |
| 6 | Supply and fixing Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per direction of Engr in charge ,including dismantiling existing wall panneling ,complete all as specified and as directed |
| 7 | Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per as per direction of Engr in charge,including dismantling of existing framing ,filletetc complete all as specified and as directed |
| 8 | Materials and Labour for Second Class Hardwood timber Scantling unframed work Clean sawn in scantling complete including dismantling of unservicable timber scantling 40 Sqcm and over in sec in any position as in framed work complete all as specified and as directed |
| 9 | Material and labourfor brick work with locally available best quality sub class B old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM (1:4) concrete articles including demolition of Brickwork, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 10 | Material and labour for Rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement. |
| 11 | Material and labourfor Rendering 5 mm thick in cement Plater of CM 1:4 on fair faces of brick work or concrete surfaces,over and including 10 mm thick backing coat in cement mortar 1:4 on fair faces of brick work or concrete surfaces finish even and smooth without using extra cement complete all as specified and as directed. |
| 12 | Material and labour for preparation of newly plastered or unplastered surfaces of wall and applying two coat of oil bound distemperover and includinga coat of alkali resistant primer coating including provn of 1 mm thick wall care putty all as specified and directed |
| 13 | Material and Labour for preparing new plastered or unplastered wall surfaces for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, to match the existing surface of wall complete all as specified and as directed. |
| 14 | Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement, including taking down cement plaster, any description on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 15 | Material and Labour for prepration of old decorated wall by washing,rubbing down and stopping of old distempered and painted surfaces and applying one coat of oil bound distemper on walls, complete all as specified and directed. |
| 16 | Supply and fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ,complete all as specified and as directed . |
| 17 | Taking down of existing aluminium door carefully except Floor spring/hydraulic door closer from the existing frame and repair the same for smooth operation/movement, including replacing of door handle, aluminium hinge, rubber beat etc and refixing in the same location after repairing all components complete all as specified and directed. (Area of door not exc 4.00 Sqm) |
| 18 | Supply and fix in repairs Door closer of aluminium (extruded section) hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 19 | Demolition of existing cement concrete of any type in ground floor ,complete all as specified and directed . |
| 20 | Material and Labour for 40 mm thick Cement concrete type B-1 ,1:2:4(20 mm graded) as in Floor/base /sub base ,complete all as specified and directed . |
| 21 | Material and Labour for Cement concretetype B-2 ,1:3:6 (40 mm graded) in foundations, filling and mass concrete , Incldemolition of concrete Complete all as specified and directed . |
| 22 | Materials and Labour for, glazed ceramic coloured tiles, 450 X 300 X 6 to 7mm thick, conforming to IS 15622, Grade B III, on vertical surface of wall such as dados, skirting etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 23 | Materials and Labour for,Non - skid Ceramic tiles, coloured,7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, conforming to IS 15622, Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. |
| 24 | Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, conforming to IS 15622, Grade B IIa,on vertical surface of wall such as dados,skirting etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. |
| 25 | Supply and fix in repair GI pipes \"medium grade\" 15 mm bore galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors including taking down exiting tube,complete all as specified and as directed. |
| 26 | Supply and fix in repairforGI pipes , \"medium grade\" 20 mm bore galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors including taking down exiting tube,complete all as specified and as directed. |
| 27 | Disconnecting existing exc 250 ltrs and not exc 500 ltrs water tank, setting aside (or loweringif required)for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.(Note : Cleaning repairing, etc. measured separately) |
| 28 | Disconnecting existing exc 1000 ltrs and not exc 2000 ltrs water tank, setting aside (or loweringif required)for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 29 | Refixing of 15 mm bore old steel tubing and connections in new or old position (wall, ceiling,floors etc.) including taking up or down 15 mm dia steel tubing & connection, including cleaning of tube complete all as specified and as directed. |
| 30 | Refixing of 20 mm bore old steel tubing and connections in new or old position (wall, ceiling,floors etc.) including taking up or down 20 mm dia steel tubing & connection, including cleaning of tube complete all as specified and as directed. |
| 31 | Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I ,including ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed and including dismantling existing water tanks exc. 250 but not exc.500 litres capacityand removing to store, complete all as specified and directed. |
| 32 | Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I ,including ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed and including dismantling existing water tanks exc. 500 but not exc.1000 litres capacity and removing to store, complete all as specified and directed. |
| 33 | Supply and fix in repair500-1000 litres capacity rotational moulded polyethylene water storage tanks covers including necessary fittings required for fitting ofcover to the tank,includingdismantling of existing broken covers,complete all as specified and directed. |
| 34 | Supply and Fix in repairs, 20mm ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed,complete all as specified and directed. |
| 35 | Supply and Fix in repairs, bib tap,cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed. |
| 36 | Supply and Fix in repairs,angle,stop valves,cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed. |
| 37 | Supply and Fix in repairs, pillar taps, cast copper alloy, with capstan heads, fancy type,chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed. |
| 38 | Supply and Fix in repairs, Brass chromium plated center hole basin mixer for mixing hot & cold water,single lever operated, screwed down for iron pipe 15 mm bore, and fixed ,complete all as specified and directed. |
| 39 | S&Fin repairs health faucets (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 40 | Supply and Fix in repair, cast copper alloy,chromium plated urinal spreader, screwed for iron pipe,15 mm bore, complete all as specified and directed. |
| 41 | Supply and Fix in repairs, PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed. |
| 42 | Supply and Fix in repairs, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern,complete all as specified and directed. |
| 43 | Supply and Fix in repairs, PVC collapsible waste pipe (31/32 x 800) mm complete all as specified and directed. |
| 44 | Supply and Fix, 600 mm X 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 45 | Supply and Fix in repairs, vitreous China wash down closet pan and trap EWC type, white, with plastic seat cover including connection to drain (or outgoing pipes ) and to flushing pipe,antisyphonage pipe ,fixing bolt etc and making good damaged portion complete all as specified and directed. |
| 46 | Supply and fix in repairs Vitreous China squatting pan, \"Orissa\"pattern, size 580 x 440 mm white with integral foot rest and \"P\" or \"S\" trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete (excluding flushing cistern and flush pipe ) finishing with PCC gap between surface and new WC complete all as specified and as directed. |
| 47 | Supply and fix in repairs Vitreous China urinals, half stalltype (back or corner wall type)with grating, spreader and union for discharge pipe and waste pipe (excluding flushing cistern)complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for discharge pipe, complete all as specified and as directed. |
| 48 | Supply and Fix in repair PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed. |
| 49 | Supply and Fix in repairs, plastic water closet seat cover, closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed. |
| 50 | Supply and fixed in repair 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in trenches or in floors, 75mm bore including taking down existing pipe with fitting by necessary excavation, return filling and demolition of PCC etc if required complete all as specified and directed . |
| 51 | Supply and Fix 75 mm bore PVC (SWR) bends any radius,complete all as specified and directed.Notes:- (i) The existing fittings are deemed to be taken down along with the SWR pipe. |
| 52 | Supply and Fix, 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc.(measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 53 | Supply and Fix, 110 mm bore PVC (SWR) bends any radius,complete all as specified and directed.Notes:- (i) The existing fittings are deemed to be taken down along with the SWR pipe. |
| 54 | Supply and fix in repair Wash Hand Basin 550x400mm, vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 55 | Supply and fix in repair Wash Hand Basin 565x430x845mm, vitreous China,one piece wash basin with padestal ,white colour , any size, including fixing it with necessary fiitingbut exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 56 | Supply and fix sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including taking down of existing sink , complete all as specified and directed. |
| 57 | Supply and fix powder coated (minimum thickness of powder coating 50 micron) aluminium three track window and ventilator frame with powder coated (minimum thickness of powder coating 50 micron) aluminium sliding glazed shutters (2 Nos Glazed shutter & 1 Nos Gauzed shutter), made out of aluminium section weighing not less than 0.55 Kg/RMwithout sash bars, including necessary jointing cleats, glazing clips, rubber packing, powder coated (minimum thickness of powder coating 50 micron) aluminium snap beading, locking arrangements, handle screws etc. including 4mm tinted glass, stainless steel wire mess and taking down of existing shutter with frame complete all as specified and directed. |
| 58 | Supply and fix for powder coated aluminium door frame and shutter single leaf panelled door partly glazed with 5mm thickglass and partly 6mm thick prelaminated board door shutter divided into two panels fabricated including powder coated aluminium snap beading and rubber gasket/ lining for fixing of glass and prelaminated board panel. The door frame shall be fixed aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size. The door frame and shutter shall be comprising of the following section and fitting including taking down of existing shutter with frame and fittings complete all as specified and directed:-(a) Aluminium door frame section 101.6x44.5x1.27mm(b) Aluminium styles of shutter section 85x44.5x1.56mm(c) Aluminium top & bottom rail of shuttersection 101.6x44.5x2.5mm(d) Aluminium middle/ lock rail of shutter section 100x44.45x2mm(e) Aluminium handle 250mm long 02 Nos in each shutter(f) Aluminium tower bolt 200mm long as required as per normal(g) Six lever mortice lock brass(h) 03 Nos aluminium butt hinges 100mm long (i) 06mm thick pre-laminated board (j) 5.0mm thick tinted glass (Note: In case of two leaf each leaf wil be measured seperately) |
| 59 | Material and labourfor Providing precast cement concrete type-B1 1:2:4 (20 mmGraded ) set in cement mortar 1:6asin landings, cover slabs (for man holes,drainsetc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, including of demolition of existing reinforced cement concrete slab of any thickness,complete all as specifiecd and asdirected. |
| 60 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Complete all as specified and as directed |
| 61 | Supply and fix, stainless steel anodised curtain rod 20mm dia, including set of fixing bracket, fennels etc, fixed to wall, length 1.50 to 2.50 metre, fixed as in repairs, including removal of old to store for reuse or credit,complete all as specified and directed. with holder/bracket, stops, rollers etc. |
| 62 | Supply and fix in repairGrating doom 100 to 125 mm dia PTMTwith/without hole complete all as specifiedand directed |
| 63 | Declogging and cleaning of floor trap/nahani trap/gully trap and clearing of blockage for clog free flowing of waste water upto the first manhole,complete all as specified and as directed. |
| 64 | Declogging and clearing of blockage of IWC/ EWC/ Urinalby removing chocked wastes/silt and mud etc., including removal of debris from site and washing down thoroughlyfor free flowing of waste upto 1st manholeand finally cleaning the washroom/toilet with clear water throughly or removal of debries/dirt etc.,complete all as specified and directed. |
| 65 | Material and labour for cleaning of sewage line of any dia upto 200mm bore from manhole to manhole with mechanical cleaning device in compliance of section 5 and protective gear and safety devices in compliance of section 4 of \"The prohibition of employment as Manual Scavengers and their rehabilitation Act 2013\" to clear sludging/blocking in side the sewage line and well flushing with water to drain the loose sludge etc inside the sewage line from manhole to manhole inlcuding removing and refixing the manhole cover all as specified and as directed. |
| 66 | Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete. |
| 67 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete. |
| 68 | Taking down shutters of any description not exceeding 1.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed. |
| 69 | Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed. |
| 70 | Taking down wooden shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and refixingin the same opening after necessary repair, easing and adusting, jointing replacement/refixingof mongries etc, complete all as specified and directed. |
| 71 | Resecuring or easing & adjusting without taking down Shutters of any descriptionexceeding 1 sqm each and not exceeding 2 sqm complete all as specified and directed. |
| 72 | Supply and fixing plain, solid, 2nd class hard wood straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with pinned at joint etc complete. |
| 73 | Supply and fixing 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically presssure treated complete. |
| 74 | Supply and fixing second class hard wood 35 mm thickplain, glazed and skelton factory made shutters, open rebated and prepared divided into squares with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately. |
| 75 | Supply and fixing 30 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I and fitted to chowkats. |
| 76 | Supply and fix 300 mm, mild steel helical pattern door springs including roller and roller plate complete all as specified |
| 77 | Suppy and fix in repairs 300mm, mild steel helical pattern door springs including roller and roller plate complete all as specified |
| 78 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm as in doors and windows with necessary nuts and bolts/ fillets complete all as specified and directed. |
| 79 | Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm as in doors and windows with necessary nuts and bolts/ fillets complete all as specified and directed. |
| 80 | Supply and fixing plain sheet glass 3 mm thick, ordinary quality, not exceeding 0.50 Sqm in each pane, and glazing with oil putty/wooden beads with nailing complete all as specified and directed. |
| 81 | Supply and fixing stainless steel butt hinges, medium weight, 75mm long, cold rolledmild steel , complete all as specified and directed. |
| 82 | Supply and fixing 150 mm long aluminium handles, cast type, anodisedcomplete all as specified and directed. |
| 83 | Supply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 84 | Suppy and fix aluminium alloy sliding door bolt 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 85 | Material and labour for applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed. |
| 86 | Supply and fix Rolled mild steel, conforming to Fe 290, Gde E-165, in Joist, channel, angle or tee sections, fixed independently without connecting plates etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated)including dismantling of wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed. |
| 87 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) |
