|
| 1 | Dismantlingof Asbestos cement corrugated or semi corrugated etc sheets in roof coveringcomplete all as specified and directed. |
| 2 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantlingfillets, rails, post, rafters, purlins, etc under 40 cm in sectionin any position unframed work. complete all as specifiedand directed |
| 5 | Dismantling timber scantlings 40 sqcm & over in section , in any position unframed work/ truss etc complete all as specified and directed. |
| 6 | S&F Rooled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410W(Gde E-250 Quality -A) complete all as specifiedand directed |
| 7 | S&F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepaintedsnap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces complete all as specified and directed. |
| 8 | M&L for Vitrified double charged coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm andnot exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement motar complete all as specified and directed. |
| 9 | All as per serial item as per Item No 8 but as in vertical surfaces including dismantling of tiles and rendering 10 mm thickin cement mortar 1:4, as in backing layer complete all as specified and directed. |
| 10 | M&L for non- skid ceremic colouredtiles7 to 8 mm thick(Square/rectangular) areaof each tile exceeding0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 11 | M&Lfor colour glazed ceremic colouredtiles invertical surface 300x600 x7 mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified and directed. |
| 12 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed. |
| 13 | M&L for 20 mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete incuding hole for gas pipe complete all as specified and directed. |
| 14 | M&L for 20-25 mm thick machine cut pre polished kota stone slab flooring laid under stairs soffits area and jointed with grey cement slurry fixed with pigmentto match to shade of the slab including rubbing and mirror polishing over and or 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 15 | M&L for 20-25mm thick machine cut pre polished kota stone slab in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration using as front door steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screedcomplete complete all as specified and directed. |
| 16 | Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and directed. |
| 17 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement limemortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 18 | M&L for Brickwork old size with subclass‘B’ bricks, except brick straight orcurved on plan exc 6mmeanradius built in in CM (1:6) complete all as specified and directed. |
| 19 | M&L for Brick work with fly ash bricks ,old size brickstraight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and directed. |
| 20 | M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) complete all as specified and directed. |
| 21 | Taking down cement plaster from wall of any description including terrazzo tiles, skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed. |
| 22 | M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in cm 1:4 using WPC as per manufecturer instruction of cement including finishing the surface even and smooth without using extra cement complete all as specified and directed.Note :- WPC shall measured and to be paid separately for this item. |
| 23 | M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in cm 1:6 on other than fare face finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | Supply only liquid waterproofing compound complete all as specified and directed. |
| 25 | M&L for applyingone layer ofwall care putty on wall surfacesincl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as specified and directed. |
| 26 | M&L for applying two coat of distemper oil emulsion white or tinted on newly decorated or undecorated wall surface including preparation ofsurfaces by washing rubbing down and stoping of any surfaces of walls complete all as specified and directed. |
| 27 | M&L for applying two coat of distemper oil emulsion white or tinted on old decorated or undecorated wall surface including preparation ofsurfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed. |
| 28 | M&L for applying two coat of cement based paint on old decorated or undecorated wall, roof surface including preparation ofsurfaces by washing rubbing down and stoping of old wall surfaces complete all as specified and directed. |
| 29 | M&L for white washing two coats on wall surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding complete all as specified and directed. |
| 30 | M&Lfor prepration of newly plastred surfaces of wall and applying two coat of cement base paintcomplete all as specified and directed. |
| 31 | M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish old wall surfaces complete all as specified and directed. |
| 32 | M&L for plain cement concrete 1:3:6typeC-1(using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 including demolition of existing surfaces complete all as specified and directed. |
| 33 | Taking down of chowkats of frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed. |
| 34 | Taking down of chowkats of frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed. |
| 35 | S&F 105x60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing andinner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete complete all as specified and directed. |
| 36 | S&F 35 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side complete all as specified and directed. |
| 37 | S&F factory made 35 mm thickPlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 38 | M&L for 35mm thick Factory made plain framed glazed and skeleton shutter open rebated& prepared to receive glass, gauge etc, with sash bar edges of framingplain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - ISection 8 clause 8.24 (a) fitted to chowkats all as specified and directed. Note:- Wiremesh will be measured and paid separately. |
| 39 | S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 40 | S&F 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 41 | S&F 100mm long stainless steel butt hinges complete all as specified and directed. |
| 42 | S&F 150mm long aluminum handles, cast type complete all as specified and directed. |
| 43 | S&F 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed. |
| 44 | S&F 200mm longAluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extrudedsections and fixing bolts and sliding bolts of extrudedsections or cast complete all as specified and directed. |
| 45 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 46 | M&L for painting to wood and wood based surfaces of any descriptionexc. 10 cm width or girthwith two coats of synthetic enamel paintover a coat of pink primerincluding prepration ofsteel surfaces complete all as specified and directed. |
| 47 | M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly pained complete all as specified and directed. |
| 48 | S&F in repairs 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate if fixed to chowkats with flat iron 40x3mm size 75cm long with necessary bolts, etc complete all as specified and directed. |
| 49 | S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 complete all as specified and directed. |
| 50 | S&F sheet glass of 4mm,ordinary quality andglazing with oil putty or wooden beading in squares n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 51 | S&F galvanisedmild steel wire cloth 0..56mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 52 | S&F powder coatedaluminium frame for windows, ventilators and kitchen cupboards frame size 100x44mm and 2mm thick or requisiste size approved by accepting officer with one or more rebates including joining cleat for fixing etc and add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified. Weight of section should not less than 1.12 kg per RM complete all as specified and as directed. |
| 53 | S&F powder coated aluminium Door, window, partiton and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays , hinges type B-21suitable handleeach shutter complete all as specified and directed.Note : Cost of rubber beading and required accessories shall be included in the rate of item and will not be paid extra. |
| 54 | M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination work complete all as specified and directed. |
| 55 | S&F steel grill/ guard barsfor window/ ventilators or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed. |
| 56 | S&F sheet glass 5.5mm thickselected quality and glazing with oil putty necessary beading in square n exc 0.5 Sqm each pane complete all as specified and directed. |
| 57 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below :- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified |
| 58 | M&L Aluminium partition frame work anodized powder coated frame of size 62.5 mm x 37 mm x 2.5 mm thick with bottom & middle rail of section 62.50 mm x 37 mm x 2.5 mm thick and styles, top rail of section 62.50 x 37 x 2.5 mm thick including jointing cleats, fixing of glazing with 5.5 thick ordinary plain glass or 5 mm aluminium composit panelincluding necessary fittings fixtures complete all as specified and directed. |
| 59 | S&F aluminium extruded section body Door closer hydralically regulated,designation No. 3,universal type, suitablebfor door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as spd & directed |
| 60 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as spd & directed |
| 61 | S&F mild steel framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing etc and similar work including welding complete FE-290 grade E-165 all as specified and directed. |
| 62 | S&F Prelam hollow PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more thant 200 mm. The strips shall be fixed to wall vertically at an equal interval of 10\" between two PVC strips.A strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be stuck at theplaces where two panels are jointed, using solvent cement and including taking down existing PVC wall paneling complete all as specified and directed. |
| 63 | S&F 15mm bore galvanised steel water tubing with all fittings \"medium grade\" and fixed complete to wall and ceiling or laid in floors including taking down of GI tubing complete all as specified and directed. |
| 64 | S&F 20mm bore galvanised steel water tubing with all fittings \"medium grade\" and fixed complete to wall and ceiling or laid in floors including taking down of GI tubing complete all as specified and directed. |
| 65 | S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including taking down of existing PTMT gate valve complete all asspecified or as directed. |
| 66 | S&F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position including taking down old water tank complete all as specified and directed. |
| 67 | S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified and directed. |
| 68 | S&FVitreous China table counter top wash basin of suitable sizeincluding SSbottle trap, and cabinet of PVC shutter fixing on counter with SS waste couplingcomplete all as specified and as directed. Model : Cat No 91072 Orchid of Hindware , Cera Cat Part No 2030104, Kerovit Cat part No :- KB2243 & Asian Paints cat part No :-TT-53-X |
| 69 | S&F Vitreous chinaware coloured wash hand basin with padestal of size 55X40X82cm complete including CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.Model :- Jaquar Cat Part No:- FNS-WHT-40801 for WHB &FNS-WHT-430301 for pedesal, Cera cat part No S2040104 for WHB & S2090101 For pedestal, Kerovit Cat Part No K0284W for WHB & KO314W for pedestal, Hindware cat No 10082 & Asian Paints Cat part No WM-24-X for WHB & FP-24-X for Pedestal. |
| 70 | S&F in repairs Vitreous china wash down water closet EWC) white semi-pedestal pattern complete, including connection to drain pipe and to flushing pipe antisyphonage pipe plastic water closet seat back closed pattern with flat bottom cover and mild steelchromium plated or aluminized hinging device, incl. jet connectionsetc complete all as specified and directed. |
| 71 | S&F in repairs vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with \"P\"or \"S\" trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. |
| 72 | S&F in repairsPVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. Model :- Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32, Parryware Cat No 8177*, CeraCat No B1810110 fittings snow white |
| 73 | S&F in repairs vitreous china full stall urinalwhite, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed. Make Jaquar- URS-WHT-13261H, Kohlelr K-4991-ET-O/Gorhe -39438000/Equvalant make approved by GE. |
| 74 | S&F health faucet 1 mtr SS Braided connection tube with wall hook complete for EWC incl necessary fitting includin taking down of PTMT faucet complete all as specified and directed. Make : Jquare Cat Part No ALD-CHR-577, Cera Cat No :- F803008AB, Asian Paints Cat Part NoC-232N & Kerovit Cat No KA580008 |
| 75 | S&Ffancy type 150mm size square/rectangular brass CP shower rose with or without swivel joints includin taking down of PTMT shower complete all as specified and as directed.Model No:Cat No. F 7010505AB of Cera, Hindware Model Cat No F 16062 ,Asian Paints Cat Part No RF 208 & Kerovit Car Part No KA570018 |
| 76 | S&F brass chromium platedwall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls incl necessary fitting including taking down of PTMT existing fittigs complete all as specified and as directed.Model : Model of Hindware Cat No F390022, Cera Cat Part No :- F1012403, Kerovit Cat Part No KB511018 & Asian Paints Cat Part No ALWM104. |
| 77 | S&Ffancy type 15mm dia chromium plated fancy type basin mixer hot & cold with long swan for kitchen sink fixing and connection to pipesincluding taking down of PTMT existing fittigs necessary complete all as specified and as directed. Model :- Cera cat Part No:-1016501 ,Kerovit Cat Part No KB411019 & Asian Paints Cat Part No SYSM101. |
| 78 | S&F brass chromium plated tubular towel ring including a pair of CP brass bracketincluding taking down of PTMT existing fittigs complete specified and directed.ModelNo:- Cera Model No F5002105, Asian Paints Cat Part No SQTW 201 & Kerovit Cat Part No KA670005 |
| 79 | S&Ftubular, towel rail brass chromium plated 25mm dia D type 60 cm long between flangesincluding taking down of PTMT existing fittigs complete all as specified and directed |
| 80 | S&F in repairs fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. |
| 81 | S&F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. Model:model No F-5005301 of CERA,Asian Paints Cat Part No AC107 & Kerovit Cat Part No :- KA920005 |
| 82 | S&F in repairs designed looking mirror area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 83 | S&Ffancy type chromium plated brass angle valve type suitable for 15mm bore pipeincluding taking down of PTMT existing fittigs complete all as specified and directed.Model : Hindware Model No F320006,CERA Cat No :- F1017201, Kerovit Cat part No :- KA910007 & Asian Paints Cat Part No MAAC101N. |
| 84 | S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turnincluding taking down of PTMT existing fittigs complete all as specified and directed.Model : Cera model No F1014151,Kerovit Cat Part No KB 2111004, Asian Paints Cat Part No MABC101. |
| 85 | S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts specified and directed. |
| 86 | S&F in repairs 100mmx100mm stainless steel grating fixed complete all as specified and directed. |
| 87 | S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laying in floor etc complete all as specified and directed. |
| 88 | S&Fin repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. |
| 89 | Taking up or down AC/PVC/SWG rain water pipe, soil/waste/vent pipe of any size with fittings etc. complete all as specified and directed. |
| 90 | S&F PVC (SWR) 110 mm diasoil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete all as specified and directed. |
| 91 | S&F in repairsPVC (SWR) 110 mmbore bends complete all as specified and directed. |
| 92 | S&F in repairsPVC (SWR) 75 mmbore bends complete all as specified and directed. |
| 93 | S&F PVC (SWR) 75 mm diasoil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete all as specified and directed. |
| 94 | S&F in repairs PVC (SWR) vent cowl 75 mm dia complete all as specified and directed. |
| 95 | S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 96 | S&F in repairs for PVC (SWR) floor trap/Nahani Trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 97 | Demolition of cement concrete (unrinforced), in ground floorand paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed. |
| 98 | M&L for cement concrete type D2 1:4:8(40 mm graded aggregate) as in mass concrete complete all as specified and directed. |
| 99 | M&L for 25mm thick cement concrete type B1 1:2:4 using 12.5mm graded stone aggregate in floor finishes even and fair to receive floor tiles complete all as specified and directed. |
| 100 | M&L for 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 101 | Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 102 | M&L for formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified and directed. |
| 103 | M&L for formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed. |
| 104 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 105 | M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 106 | M&L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc. complete all as specified and directed. |
| 107 | M&L for RCC type B 1, 1:2:4 (20mm graded agg) as in beams, cantilevers, lintels, complete all as specified and directed. |
| 108 | M&L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in chajjas and like complete all as specified and directed. |
| 109 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose Soil complete all as specified and directed. |
| 110 | Removing excavated soil n.exc 50mtr and depositing where directed at a level n exc 150 mtr above the starting point complete all as specified and directed. |
| 111 | Returning filling in,including spreading,levelling,watering and well ramming in layers n exc 25cm in soil complete all as specified and directed. |
| 112 | Excavating in post holes in soft and loose soil (orsimilar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earthor broken rubble mixed withearth around, in layers notexceeding 25 cm complete all as specified and directed. |
| 113 | Dismantling posts or struts, support members, pulin rafter etc (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground in natureal ground complete all as specified and directed. |
| 114 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 150mm dia complete all as specified and directed. |
| 115 | M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laidin trenches and jointes including concrete bed to drain150 mm bore NP-2 pipe, in plain Cement concrete 1:3:6 type C-1(using 20 mm graded stone aggregate)including packing under, and haunching against the sides of pipes after they are laid and tested including dismantling of existing pipe complete complete all as specified and directed. |
| 116 | M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab set in and pointed in CM 1:6 including necessary formwork including necessary demolition of slab complete all as specified and directed. |
| 117 | Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified. |
| 118 | Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified. |
| 119 | Taking down submain wiring including all accessories complete all as specified and directed. |
| 120 | Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI markednot less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered withmodular plateand cover of suitable size with new brass screwsfor mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with strandedcopper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- |
| 121 | (a) One light / fan/ exhaust fan point controlled by one switch. |
| 122 | (b) One 5 pin 5 Amp switch socket out let point on an independent board. |
| 123 | (c) One 5 pin 5 Amp socket out let point controlled by one switch on same board. |
| 124 | All as per item 120 here in before but for one 15 Amp 6 Pin switch socket out let independent with2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistrandedincl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified. |
| 125 | S & F Modular switch one way 6 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 126 | S & F Modular switch one way 16 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 127 | S & FModular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 128 | S & FModular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 129 | S & FModular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 130 | Supply and Fixing ceiling rose PVC/ Poly carbonate,Isolated body, threeterminal AC 230 volts complete all as specified and directed. |
| 131 | S&F in replacement LED mirror light fitting of 1 x 10 wattLED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 132 | S&F in replacement LED light fitting of 1 x 20 wattLED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 133 | S&F, in repairs, LED light fitting, high lumenshoused in extruded from powder coated aluminium, 2x236 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. |
| 134 | Supply and Fix in repair Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. for fixing in wall of suitable size and length of bracket not less than 1.2 mtr complete all as specified and directed.Note:-Cost of bracket,clamps and nut bolts included in quoted rate. |
| 135 | M&L for sub main wiring with two single core 6.0 Sqmm (FRLS)copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :-Two runs of 6.0 sqmm (FRLS) and one run of 6.0 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 136 | M&L for sub main wiring with 2 single core 4 Sqmm (FRLS)copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified.( Note :- Two runs of 4 sqmm (FRLS) and one run of 4 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 137 | Supply and fix Exhaust FanMetal Body AC single phase 230/240V of size 300 sweep with louver complete all specified and directed.including taking down and deposited in MES Yard for BER |
| 138 | S &F sheet metal enclouser with socket plug top andMCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed. |
| 139 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. . Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 140 | Taking down Ceiling Fan of any size and place in safely and deposited in MES Yard for BERy by the contractorcomplete all as specified . |
| 141 | S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. |
| 142 | S&F MCB single pole 6 to 32 Amp 240 Volt \"B\" curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 143 | S&F MCCB Triple pole125 Amps 415 Volt curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 144 | Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral linkscomplete including taking down old unsv all as specified and directed. |
| 145 | Supply and fix TPN DB -VTPN DB 4 way suitable forMCCB 100 Amps , 415 Volt, 3 Phase, 4 wire AC 50 Hz having aluminium Bas Barphase and the neutral insulated with PVC sleeves, connected with appropriate size copper thimbles. |
| 146 | Taking down carefully serviceconnections of any description from pole, wallor service brackets etc including making good disturbed surface to match with the existing surface complete all as specified. |
| 147 | Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm, 3.5 core. |
| 148 | M&L for sand cushioning laid in trenches for laying of LT UG cables complete |
| 149 | M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protectioncomplete all as spd and directed. |
| 150 | S&F GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG Cables laidto walls or in floors or along with poles etc complete all asspd and directed. |
