|
| 1 | Taking down cement or cement lime plaster at any positionincluding raking out joints, hacking for key and scrubbing down with water complete all as directed. |
| 2 | M & L for chipping removing carefully concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debries out side the premises etc complete all as directed. Note:- Hard concrete should not be removed by force. |
| 3 | M&L for Clean existing reinforcement with wire/ rotary wire brush making the surfaces free from loose material dirt etc complete, applying two coats of alkaline rust converting primer FEOVERT of Krishna conchem or Dr. Fixit equivalent confirming to ASTM-B-117 on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as directed. |
| 4 | M&L Carry out application of \"Bi-polar migratory corrosion inhibitor\" EPCO-KP-100 or equivalent on concrete surface complete all as directed. |
| 5 | M&L for Providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster conferming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as directed. |
| 6 | M&L for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15=1-MONOBOND, 5-Cement, 15-Sand) in damaged areas in 20mm thickness including leveling profiling etc complete all as directed. |
| 7 | M&L for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15=1-MONOBOND, 5-Cement, 15-Sand) in damaged areas in 40mm thickness in two layers including leveling profiling etc complete all as directed. |
| 8 | Replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as directed. |
| 9 | M&L for 18 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work complete all as directed. |
| 10 | S&F 30mm continuous piano hinges mild steel bright finish or elec-trogalvanised complete all as directed. |
| 11 | S&F Extruded brass handles, fabricated type polished 150 mm in size and fixed complete all as directed. |
| 12 | S&F door magnet for modular kitchen cabinet complete all as directed. |
| 13 | Dismantling wall and ceiling boarding of anydescripion , thickness incl. cover fillets complete all as directed. |
| 14 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wiremesh complete all as directed. |
| 15 | M&L for Rendering 15mm thick on brick or concrete surface in Cement mortar (1:4) finishing external surface even and smooth w/o using extra Cement complete all as directed. |
| 16 | M&L for 15mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished complete all as directed. |
| 17 | M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as directed. |
| 18 | M&L for preparation of new plastered wallsurface applying two coat of \"Birla White wall care putty\"or\" JK Wall Care Putty \"to make the entire surface free from undulations complete all as directed. |
| 19 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 20 | M&L for Preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 21 | M&L forrepair and rendering 10mm thickin cm 1:3on chajjas not exceeding 60cm width after removing cracked plaster and concrete includingcleaning of viisible reinforcementandtreating with cement slurry also necessary repair to cracked concreteif any with cement concrete1:2:4 Type B-0 using 12.5mm gradedstone aggregateincluding necessary scafolding work for double/single storey bldgs complete all as directed. |
| 22 | Dismantlingfloor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 23 | M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cilletc complete all as directed. |
| 24 | M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirtingetc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as directed. |
| 25 | M&L for joint free non skid colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match existing surfacescomplete all as directed. |
| 26 | M&L for 9-10mm thick Light coloured vitrified ceramic tiles of sizein floors, exceeding 0.42 sqm but not exceeding 1.00 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as directed. |
| 27 | -ditto- all as per ser item No 26 abovebut as in Skirting with 10mm thick rendering in CM 1:3. |
| 28 | M&L for ceramic paver tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour & including 15mm thick screed bed in CM 1:4, complete all as directed. |
| 29 | Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as directed. |
| 30 | M&L for Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as directed. |
| 31 | M&L for Brick work with sub class \"B\" bricks straight or curved on plan to any radiusin half brick thick wall built in cement mortar 1:4, complete all as directed. |
| 32 | Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed incl removing from site complete all as directed . |
| 33 | Taking down chowkhats or frame exc 1.50 Sqmbut n.exc 4 sqm each with shutter without taking of shutter from framedincl removing from site complete all as directed. |
| 34 | Taking down shutters of any description n exc 1 sqm and removing from site complete all as directed. |
| 35 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, window and ventilator shutters ,grill, fixed / sliding track two or three trackincluding frames ,glazing clips , cleatsside hung type without sash bars, fixed window, ventilators etcwith one or more rebates including joining cleat for fixing etc. complete all as directed. |
| 36 | S&F 4 mm thick plain sheetglass type and glazing fixed in aluminium frame work exc 0.5 Sqm in each pane etc complete all as directed. |
| 37 | S&F in repair brass CP bracket fancy type suitable for fixing to 25mm dia curtain rod complete all as directed. |
| 38 | S&F in repair Stainless steel tubing of 19/20 mm bore, 1.00mm wall thickness as in curtain rod complete including fixing brackets, stops etc. complete all as directed. Note:- For the purpose of measurement and payment running length of curtain rod only shall be considered. |
| 39 | S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as directed. |
| 40 | S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 complete all as directed. |
| 41 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness (above or below GL) complete all as directed. |
| 42 | M&L for 75mm thick, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, as in sub base of floor complete all as directed. |
| 43 | M & L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge complete all as directed. Note:- 10mmwideand 75mm deep joints shall be made at 3 mtr intervel andat each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. |
| 44 | Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons, etc complete all as directed. |
| 45 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm single side Prelam PVC sheet reinforced with MS Square tube in opening all as shown on drawing complete all as directed. |
| 46 | S&F factory Made with particle board core Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawing complete all as directed. |
| 47 | S&F for steel wire cloth 0.36 mm nominal dia. Of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as directed. |
| 48 | M&L for 3 mm thick plain sheet glass ordinary quality exc 0.50 Sqm in each pane complete all as directed. |
| 49 | M&L for 4.8 mm thick plain sheet glass ordinary quality exc 0.50 Sqm ,if sheet glass is ground or obscured or frosted on one side in each pane complete all as directed. |
| 50 | S&F butt hinges 75mm long medium weight cold rolled MS and fixed complete all as directed. |
| 51 | M&L for providing and fixing except stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as directed. |
| 52 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area not exceeding 2.00 sqm each including door espag, lever door handle, centre striker, 3D hinge, glazing bridge and silicon sealant complete all as directed. |
| 53 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass complete all as directed. |
| 54 | S&F 150mm long overall length of cover plate floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as directed. |
| 55 | M&L Granite (of any type) work (table rubbed and polished) of any shade 18 to 20mm thick in cooking platform, steps, windowcills, etc over and incl 20mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl roundingof slab & demolition of old slab where directedcomplete all as directed. |
| 56 | M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as directed. |
| 57 | Demolition of cement concrete reinforced as in chullah hoods , shelves, cover slaband plate formetc complete all as directed. |
| 58 | M&L for RCC as in kitchen platform, shelves type B0 1:2:4(using 12.5 mm graded stone aggregate) including necessary form work complete all as directed. |
| 59 | M & L for mild steel TMT bars 8 to10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed. |
| 60 | Taking up or down steel tubing and connection of 15 mm bore complete all as directed. |
| 61 | -ditto- all as per ser item No 60 abovebut for 20 mm dia bore pipe. |
| 62 | -ditto- all as per ser item No 60 above but for 25 mm dia bore pipe. |
| 63 | S&F steel tubing for 15 mm bore and connectiontubingin new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc for hot and cold water complete all as directed. |
| 64 | -ditto- all as per ser item No 63 above but for 20 mm dia. |
| 65 | -ditto- all as per ser item No 63 above but for 25 mm dia. |
| 66 | Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as directed. |
| 67 | -ditto- all as per ser item No 66 above but 20mm bore. |
| 68 | -ditto- all as per ser item No 66 above but 25mm bore. |
| 69 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed including dismantling of existing tank complete all as directed. |
| 70 | S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylenecomplete all as directed. |
| 71 | S & F in repair for PVCconnection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as directed. |
| 72 | S&F in repair 15mm dia angle stop valves cast copper alloy fancy type,chromium plated complete all as directed. |
| 73 | S&Fin repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc complete all as directed. |
| 74 | S&Fin repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as directed. |
| 75 | S & F in repair, 15mm borebib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as directed. |
| 76 | S & F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as directed. |
| 77 | M&L labour Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing union and cap and fixed etc complete all as directed. |
| 78 | S&F in repair vitrious china wash basin, white flat back size 550 x 400 mmincluding waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete all as directed. |
| 79 | S & F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as directed. |
| 80 | S&F of 75 mm dia. PVC (SWR) multi floor trap with Stainless steel grating including jointing fixed in cement concrete type B-1 (1:2:4) complete all as directed. |
| 81 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as directed. |
| 82 | S & F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as directed. |
| 83 | S&Fin repairs 15mmdia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered \"Hot or Cold\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as directed. |
| 84 | Supply and fix shelf 450mm longof PTMT fixed with and incl chromium plated brass screws and wooden /plastic cleats (minimum weight 300 grams) complete all as directed. |
| 85 | S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm bawl size 410 mm x 330 mm x 160 m and including 38/40mm dia waiste pipe complete all as directed. |
| 86 | S&F CP towel rail, 20mm dia, D type,60cm long complete all as directed. |
| 87 | M &L 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building boardor commercial ply wood and fixed to wooden ply with chromium plated brass screws and cup washers complete all as directed. |
| 88 | Supply and fix in repairs bath room mirror cabinet PVC of size 450mmx600mm fancy type complete all as directed. |
| 89 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site complete all as directed. |
| 90 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as directed. |
| 91 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as directed. |
| 92 | S&F PVC (SWR) bends 110 mm bore of any radius complete all as directed. |
| 93 | S&F PVC (SWR) bends 75 mm bore of any radius complete all as directed. |
| 94 | S&F PVC (SWR) junction single (singleT) equal or unequal110mm bore provided with access door complete all as directed. |
| 95 | S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door complete all as directed. |
| 96 | S&F 110 mm bore PVC (SWR) vent cowl complete all as directed. |
| 97 | S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement complete all as directed. |
| 98 | S&F 110mm dia PVC (SWR)WC connector with lip ring complete all as directed. |
| 99 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm after complete removal of existing surfaces complete all as directed. |
| 100 | M & L for applying two coats of oil bound distemper on newly plastered surfaces of ceilings after priming plastered and other surfaces with alkali resistant priming paint including necessary preparation of the surface, complete all as directed. |
| 101 | M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper to ceiling complete all as directed. |
| 102 | M & Ltwo coat of wall care putty on surfaceincl preparation of surfaces to making the surface to receive,finishes including complete scraping of existing treatment complete all as directed. |
| 103 | M & Ltwo coats of oil bound distemper on newly prepared puttied surfaces after alkali resistant priming paintcomplete all as directed. |
| 104 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as directed. |
| 105 | Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Ramgarh complete all as directed. |
| 106 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as directed. |
| 107 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as directed. |
| 108 | Taking down carefully light fittings of any size from surface/concealed/existingof any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as directed. |
| 109 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches,including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as directed. |
| 110 | One lightpointcontrolled by one way switch |
| 111 | One fan/exhaust fan pointcontrolledby one way switch. |
| 112 | One 3/5 pin socket outlet 5 Amp on the same board with other switches. |
| 113 | One 3/5 pin 5 Amps socket outlet on independent board. |
| 114 | S&F switch modular single pole one way 6 amp 240 volts,1 Module complete all as directed. |
| 115 | S&F Modular socket 6A - 2/3pin combined 2 module complete all as directed. |
| 116 | S&F Ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as directed. |
| 117 | S&F steped type modular fan regulator ,120 W, 1/2 module complete all as directed. |
| 118 | S&F bell push flush type single pole one way 5 Amps, complete all as directed. |
| 119 | - ditto- allas per item No 109 abovewith 2.5 Sqmm (nominal area) FRLSH cable PVC for the 15 Amp 3/5 pinsocket power point including 2.5 Sqmm copper conductor green as colour for earth continuity complete all as directed. |
| 120 | S&Fswitch modular single pole one way 16 amp 240 volts,1 Module complete all as directed. |
| 121 | S&F Modular socket 16A- 2/3pin combined 2 module complete all as directed. |
| 122 | S&F LED Tubelight fitting1x18/20 Watt surface and wall mounted LED batten warm white type complete with all accessories internally prewired and incl connecting upthree core single wire with flexible pipe complete all as directed. |
| 123 | S & F LED warm white forluminaire 600 mm x 600 mm, 36 Watts, 220 V AC, suitable for mounting with Armstrong/Grid ceiling including connecting up with two core flexible copper conductor cable of suitable sizecomplete all as directed. |
| 124 | Taking down and Refixing of LED forluminaire 600 mm x 600 mm, 36 Watts, 220 V AC, suitable for mounting with Armstrong/Grid ceiling including connecting up with two core flexible copper conductor cable of suitable sizecomplete all as directed. |
| 125 | - ditto - allas per item No 109 above with 4 Sqmm (nominal area) FRLSH cable PVC for the 15 Amp 3/5 pinsocket power point including 4 Sqmm earth copper conductorfor AC point controlled by one 15 Amps switch one way/metal clad industrial socket complete all as directed. |
| 126 | S & F Single pole and neutral enclosure with a two pin and earth plug and socketcomplete with one single pole MCB 20 Amp complete all as directed. |
| 127 | S&F Buzzer,DingDongAC.230volts, single pole, complete all as directed. |
| 128 | Supply and fixLED light fitting Integral slim LED batten Integral 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with three core flexible copper conductor cable with flexible pipe of suitable size from ceiling rose complete all as directed. |
| 129 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 130 | S & F in repair energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 65/66 for security light fitting luminarie with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. |
| 131 | S&FLamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked) complete all as directed. |
| 132 | S&FLED bulb of capacity 9 watts with lumen output 950 lm, 113 mm length and 60 mm dia, base cap B22,(ISI marked),3 star rated lamp complete all as directed. |
| 133 | Supply and fixing round shape warm white 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 134 | Labor only for refixing the ceiling fan/Exhaust fan obtained from item No. 2 above with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans/ exhaust fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writing the MES Number with synthetic enamel paint complete all as directed. |
| 135 | Supply and fixing of exhaust fan electric single phase, AC 240 Volts, 50 hz,copper winding, 300mm sweep, 1200RPMmade of sturdy Engineering plastic body complete with louvers and connecting with flexible PVC insulated multi stranded flexible copper conductor wire with flexible pipe of required sizefrom ceiling rose including cutting of wall and finishing of plaster complete all as directed. |
| 136 | Supply and fixfor sheet metal enclosure MCB DB TPN 4 way with vertical type suitable Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for MCCB as incomer and inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surfcae to match with existing color of wall complete all as directed. |
| 137 | Supply and fix sheet metal enclosures for DBs when MCBs to used single pole & neutral (SPN) double door 240 volts, 12 way with IP-43 IK-09 protection incl. Suitable Amp rated bus bar and neutral link (ISI marked) complete all as directed. |
| 138 | Supply and fix sheet metal enclosures for DBs when MCBs to used single pole & neutral (SPN) double door 240 volts, 8 way withprotection incl. 200 Amp bus bar and neutral link (ISI marked) complete all as directed. |
| 139 | S&Ffor TPN 4 pole rated capacity 100 Amps MCBs ,415 Volts breaking capacity 10 KA, \"B\" curvecomplete all as directed. |
| 140 | Supply and fixing amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 Amp in the MCB DB complete with connection commissioning and testing complete all as directed. |
| 141 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection commissioning and testing complete all as directed. |
| 142 | M&L for Sub main wiring with 2 runs of 6 sqmm PVC insulated multi stranded FRLSH copper cable drawn through PVC concealed conduit of size not below 25mm size with all fixing accessories along with 1 run of 6 sqmm copper cableas earth continuity conductor including taking down the old existing submain wiring complete all as directed.Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC conduit will be measured as one length. |
| 143 | M&L for Sub main wiring with 4 runs of 10 sqmm PVC insulated multi stranded FRLSH copper cable drawn through PVC conduit of required size with accessories along with 1 run of 10 sqmm copper cableas earth continuity conductor including taking down the old existing submain wiring complete all as directed.Note :- Four runs of 10 sqmm and one runs of 10 sqmm cable as earth along with PVC conduit will be measured as one length. |
| 144 | Earthing complete with GIearth plate electrode 600cmX600cmX6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth wire of size 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of SSR Part-I connected to earthing testing point all as specified and directed including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm dia bore GI light grade as earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of size 300x300x50mm as earth pit cover reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer, charcoal and testingcompleteall as directed.Note:- Rate quoted deemed to be included excavation and earth work in any type of soil with PCC type C1 in pit PCC Cover & other arrangement complete all as directed. |
| 145 | S&F PVC non-metallic rigid conduit ISI marked heavy duty of size 20 mm dia for LAN, Telephone and TV connection inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as directed. |
| 146 | S&F smartslide pack of 3 stainless steel modular kitchen basket/ cutlery tray/ Plate drawer/ cabinet/utensils storage organiser complete all as directed. |
| 147 | S & F in repair wall mounted goose neck sink mixer 15mm dia complete all as directed. |
| 148 | S & F in repair wall mounted WCcora vortex size -52.5 x 36.5 x 36 cm of hindware complete all as directed. |
| 149 | S & F in repairconcealed cistern concealo neo (80 mm) for wall mounted WC size -45 x 45 x 8 cm complete all as directed. |
| 150 | S & F in repair essence table top wash hand basin size -54 x 42 x 16.5 cm complete all as directed. |
| 151 | S & F in repair wash hand basin with pedestral size -50 x 40 x 80 cm complete all as directed. |
| 152 | S & F in repair urinal with integrated sensor size -29 x 32.5 x 57.5 cmcomplete all as directed. |
| 153 | S & F in repair single lever wall mounted basin mixer with 200mm spout complete all as directed. |
| 154 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 70 sq. mm 3 ½ core nominal cross section including testing complete all as directed. |
| 155 | Excavation in trenches not exceeding .50 metre wide and not exceeding .45 metre in depth for cable trenches and getting out in soft / loose soil complete all as directed. |
| 156 | Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as directed. |
| 157 | Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as directed. |
| 158 | Material and labour for Supplying and laying un-reinforced pre cast concrete cable cover class LV, Type - 1, flate, size 250 mm x 150 mm x 40 mmcomplete all as directed. |
| 159 | Material and labour for sand cushioning for protection of underground cable, consolidatedand compacted with clean dry sand complete all as directed.Note:- The depth of sand shall be measured after punning only. |
| 160 | Supply and layingHDPE pipe 50 MM of pressure rating 6 kgf/cm^2 fixed with all necessary fittings for cable protectionin walls, ceilings, floors, road etc complete all as directed. |
| 161 | S&F of landscape cylindrical shape LED bollard light 10 watt IP 66 with integrated driver, including reqd PCC foundation and establishing on ground connecting to the existing cable and make it functional complete all as directed. |
| 162 | M & L for cement concrete for foundation fillings and mass conctere type C2 1:3:6 using 40 mm graded stone aggregate complete all as directed. |
| 163 | M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to GI earth strip of size 32x6 mm (upto 7.5 metre in length from earth plate) by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 40 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregateincluding excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as directed. |
| 164 | Disconnection/taking down aluminium strip any size complete all as directed. |
| 165 | Re-fixing in repair for aluminium strip 25 X 3.15 mm with saddles, DNB insulator and fixingscrews washer etc for roof conductors and down conductors above ground complete all as directed. |
| 166 | S&F in repair for test point terminal block of size 175 mm x 120 mm x 80 mm made out of 2.0 mm thick hot dip galvanisied sheet drilled and screwed including 4 Nos 125 mm long hexagonal head screwed with test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as directed. |
| 167 | Supply, laying and testing LT cable, XLPE Insulated ,armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 Sq.mm., 2.0 core including taking down of existing cable complete all as directed.Note:- (1) Excavation & earthwork shall be measured & paid under respective item(2) All Necessary T & P required shall be arranged by the Contractor. |
| 168 | S&F moulding compound ( SMC ) box street lightjunction box of size 205 mm x 255 mm x 112mm complete with shock and rust proof, termite resistant, tamper proof , front openable type including suitable provision for three phase, four wire cable (size upto 25 Sqmm 4 Core) incoming & outgoing loop -in loop out connection and including one no.ofMCB SP 6 Amp and non metallic clamps , GI nut bolts and washers of suitable size and fixed on pole / wall complete all as directed. |
| 169 | Supplying, fabrication, installation and testing of semi-concealed type LT wall mounted panel indoor type factory made CPRI approved water and vermin proof, protection of size 1000 mm x 1000 mm x 300 mm (over all dimension) made out of 2.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 25X25X5mm frame with front openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces and connections of all outgoing / incomming cable inclusive of necessary fixing clamp as required including the outgoing / incomming cable inclusive of necessary fixing clamp as required including the following fitment accessories complete all as directed.INCOMMING(a)Copper strip bus bar of 200 Amps rated capacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos(b) 4 Pole MCCB 200 Amps with rotary handle, adjustable thermal magnetic release type 4 poles, 415 Volts, Ics = 100%, 25 KA breaking capacity,including all fixing accessories with both ends spreader links -01 No(c) LED indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC - 01 Set (set of three) Make :- Legrand/L&T/Schneider.(d)Digital multifuntion meter 0-500 volt, AC 3 Phase- 01 NoOUTGOING(a) 4 Pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links - 05 Nos (b) Supply and fixing MCB SPN 20 to 32 amps 10 KA, C-series including connection complete all as specified and directed.-02 Nos. |
| 170 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
