|
| 1 | Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed. |
| 2 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 3 | M & Lfor brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 4 | (a) Taking down cement plaster and clean the floor or wall surface for treatment by removing dust, dirt and loose particles over the surface etc by mechanical means.(b) Providing and applying the water based silicon water repellent. It shall be mixed with water in brick work or concrete surfaces in 1:10 ratio or as per manufacturer\"s instruction.(c) Providing and applying one coat of modified cementitious bonding agent / water proofing coating treatment over the treated area of water repellent mixed with 1 part of cement and 1 part of Latex SBR/Bond SBR.(d) Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 10-12 mm thick on brick walls, finished even & smooth without using extra cement complete as per manufacturer\"s instructions. |
| 5 | (a) Taking down cement plaster and clean the floor or wall surface for treatment by removing dust, dirt and loose particles over the surface etc by mechanical means.(b) Providing and applying the water based silicon water repellent. It shall be mixed with water in brick work or concrete surfaces in 1:10 ratio or as per manufacturer\"s instruction.(c) Providing and applying one coat of modified cementitious bonding agent / water proofing coating treatment over the treated area of water repellent mixed with 1 part of cement and 1 part of Latex SBR/Bond SBR.(d) Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CMon brick walls, finished even & smooth without using extra cement complete as per manufacturer\"s instructions. |
| 6 | M & L for 10 mm thick rendering in CM (1:3 ) on ceiling finished even and smooth without using extra cement incl Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 7 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed. |
| 8 | M &Lfor Non skid ceramic coloured floor tiles shade as approved andsize300 x 300mm x 7mm thick set on 15mm thick in screed bed in cement mortar (1:6) and pointed in neat cement slurry including jointing with white or colour cement to match complete all as specified and directed. |
| 9 | M & L for glazed ceramiccolourtiles of size300 x450mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement tomatch the colour of tilesas in skirting/dados over and including 10mm thick backing coat in CM 1:4 all as specified and directed. |
| 10 | Roughening surfaces of old concrete floor by picking, sweeping clean, washing down with water to remove dust etc including Brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 11 | M & L for coloured vitrified ceramic tiles, light shade of size 600x600x8-10mmthick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed. |
| 12 | Ditto all as per item No-11 above but as in vertical surfaces as in dado/skirting with and including 10mm thickbacking coat in CM 1:4 complete all as specified and direceted. |
| 13 | M&L 18-20mm thick granite stone slab, machine cut and as in shelves and partition in cupboards,bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed. |
| 14 | M & L for 20mm thick granite stone slab as in cooking platform,window cill over 15mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges complete all as specified and direceted. |
| 15 | M & L for drilling through holes in granite stone for pipes etc not exc. 25 mm diaall as specified. |
| 16 | Demolition of RCC as in lintel, shelves etcnexc 15 cm thickness (below or above ground level) |
| 17 | M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregatein RCC lintel, shelves, hold fast etc. with necessary form work complete all as specified and directed. |
| 18 | M & L for Mild steel TMT bars 10mm dia and over as in reinforcement,cut to length, bent to shape required includinghooking ends and binding with MS wire (annealed) not less than 0.9 mm dia all as directed and specified. |
| 19 | Taking down steel tubing and connections and fittings 15mm bore includingcleaning for refixing or removing from site complete all as specified and direceted. |
| 20 | Taking down steel tubing and connections and fittings 20mm bore includingcleaning for refixing or removing from site complete all as specified and direceted. |
| 21 | Supplying and laying of CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenchescomplete all as specified. |
| 22 | Supplying and laying of CPVC pipes 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenchescomplete all as specified. |
| 23 | M & L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:3 not exc 10cm in girth. |
| 24 | Taking down eaves Guttersrain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and direceted. |
| 25 | S & FPVC (SWR) Pipes 110mm dia single socketed in any length with rubber ring joints , fixed towalls complete all as specified and direceted. |
| 26 | S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 27 | S & F PVC (SWR) bendsany radius 110mm dia. |
| 28 | S & F PVC (SWR) single TEE equal 110mm dia. |
| 29 | S & FPVC (SWR) bendsany radius 75mm dia. |
| 30 | S & F in repair 75mm dia PVC Floor trap incl grating fixed in floor with cement complete all as specified and directed. |
| 31 | S & F in repairs vitreous china ware wash hand basin, white, flat back, size 550 mm x 400 with full pedestal including cutting for and pinning ends of brackets and fixed on a pair of CI cantilever bracket of appropriate size, including 450mm long braided connection pipe, 32 mm dia PTMT waste pipe & waste coupling, complete all as specified and directed. |
| 32 | S & F in repair vitreous china wash down water closet (pedestal pattern) pan white with “P” or “S” trap including connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed. |
| 33 | S & F15 mm bore CP brass Central HoleBasin mixer fixed to GI pipe with pvc connection pipe complete all as specified. |
| 34 | S & F in repair 15 mm bore CP brasswall mixture (three in one) fixed to GI pipe Braided Hoseries. |
| 35 | S & Fcast copper alloybib taps chromium plated 15mm bore pipe with crutch or butterfly handle complete all as specified and directed. |
| 36 | S & F in repairStop valve cast copper alloy with capstain head chromium plated screwed down, high pressurewith long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed. |
| 37 | S & F in repair CP shower rose fancy typewith or without swivel joints of size 125mm dia including fixingto steel pipe or union as directed. |
| 38 | S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall as directed. |
| 39 | S & F in repairPVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified |
| 40 | S & Fin repair hand shower (Health faucet) with 1 M flexible tube with wall hook bracket etc, complete set of superior quality. |
| 41 | S & Fin repairCP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality. |
| 42 | S & Fin repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer as directed. |
| 43 | S & Fin repair CP BrassTabular Towel Rail, 20mm dia D type 60cm long between flanges complete set of superior quality. |
| 44 | S & F in repair600x450mm beveled edges mirror of selected quality glass mounted on 4mm thick MDF board or plywood fixed to wall with rawal plug and CP screws complete all as specified. |
| 45 | S & Fsheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long. |
| 46 | S & F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed. |
| 47 | S & Fstainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed. |
| 48 | S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cementmortar to draft wall or cantilever brackets and connection union to pipe all as specified and directed. |
| 49 | S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel sheet of size 900 X 750 X 250 mm includingscrews and weight not less than 5.00 Kg complete all as directed. |
| 50 | S & F in repair rotantional moulded polythylene water storage tanks 500 ltr capacity(cylindrical vertical with closedtop ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 51 | S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed. |
| 52 | S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 53 | S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 54 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm and removing from sites directed. |
| 55 | All as item No 56 above but exc 1.5 Sqm but n.exc 4 Sqm Each. |
| 56 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 57 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture roof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 58 | S & F30mm thick factory made solid WPC (Wood Polymer Composite) moulded gauged door shutter with wire mesh in any no of division with brown wood grain texture including SS wiremesh (G-304) 0.36mm minimum dia of wireand average width of aperture 1.40mm shall be fixed with 15 X 15 square tube in side rails with screwing 8 X 28 heat metal zinc coated screws can be removed or fixed again after changing of wire mesh when needed. The density shall be as per manufacturer\"s instruction complete all as specified and as directed. |
| 59 | S & F Mild steel framed work such as grills, grating, framed guard bars and similar work conforming to Fe 290 Gde E -165 complete all as specified and directed.. |
| 60 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note:1. Glazed shutters float glass thickness not less than 5.00 mm and wiremesh shutters with stainless steel (SS 304) wiremesh 0.36 mm dia with aperture 1.4 mm shall also be deemed included in quoted rates and no extra payment will bemade separately.2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 61 | S & F Aluminium Butt hinges, 100mm sizecomplete all as specified and directed. |
| 62 | S & F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed. |
| 63 | S & F alumunium handle, fabricated type, anodised 150 mm longcomplete all as specified and directed. |
| 64 | S & F aluminumalloyanodized sliding door bolt 300mm long with hasp and staple (bolttype) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed. |
| 65 | S&F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed 140 MM Overall length of cover plate. |
| 66 | S & F Factory made WPC single extruded 100% lead free ISO certified board of 18mm thick both side prelaminated shutter for Kitchen cupboard, room cupboard and bathroom cupboard. The laminated shutter should be 12-14 microne pre-laminated side with color and other side same laminated color of density not less than 650 kg/ cum manufactured by an ISO 9001:2015 certified company. All the edges shall be covered with 2 mm thick edge moulding tape or 90 degree edge bend finish. The 18 mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity complete all as specified and directed. |
| 67 | S & F Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as spacified and directed. |
| 68 | Supply and Fixing for Mild steel pressed handles 150 mm, oval type, stove enamelled black for room cupboards complete all as specified and directed. |
| 69 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed. |
| 70 | S&F magnet catcher heavy duty for cupboard shuttercomplete allas specified and directed. |
| 71 | S&F 8 to 10 mm dia anchor fastner of lentgh ecx 75 mm but n. exc 150 long including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine compete all as specified and directed at site.Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt. |
| 72 | S&F in repair fancy type 25mm dia stainless steel curtain rods/Cupboard hanging rods including bracket/junctions /wall to wall and with rings of best quality as approved by Engineer-in-Charge. |
| 73 | S&F 4.8 mm Sheet glass,ordinary quality in square of any size incl Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 74 | S & F stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm fixed with stanless steel staples or steel/wooden beadings towindows complete all as specified and directed. |
| 75 | S & F 300 mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed. |
| 76 | M&L 3 mm thick Birla white putty on wall (two or more coats)complete all as specified and directed |
| 77 | M & L for preparation of new surfaces of wall and applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 78 | M & L for preparation of newplastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paintcomplete, as per manufacturer\"s specification, complete all as specified and directed. |
| 79 | M & L for complete removal of existing treatment and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paintcomplete, as per manufacturer\"s specification, complete all as specified and directed. |
| 80 | M & L forfor preparation of new plastered ceiling surface and applyingthreecoats ofwhite wash completeall as specified and directed. |
| 81 | M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 82 | M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint all as specified. |
| 83 | M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151, two parts of cement by weight complete all as specified and directed. |
| 84 | M & L for PCC 1:5:10, type E-2 using 40 mm graded stone aggregate as fondation filling and mass concrete in sunken floor etc. complete all as specified and directed. |
| 85 | M & L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in leveling course,padding of any thickness etc. complete all as specified and directed. |
| 86 | M & L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as benching/coping etc.complete all as specified and directed. |
| 87 | M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as psecified. |
| 88 | Cutting holes in brick walls built in cement mortar or cement lime mortar to a depth measured from the face of jamb exceeding half brick but not exceeding one brick and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required for fixing purlins,rafters etc. |
| 89 | S & F steel tubular section Fe-290 (Gde E-165) as in beams ,rafters,purlins and running rails and guide for sliding doors fixed with MS cleats or other connecting plates including cutting, grinding, welding etc as required complete all as specified and directed. |
| 90 | S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 91 | S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based plain steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 92 | S & F of suspended ceiling system of grid/section of size 600x600mm comprising of interlocking GI powder coated main T-runners of size 24x38x0.33mm thick of length 3000mm,cross-T of size 24X32X0.33mm thick of length 1200mm and secondary intermediate cross-T of size 24X32X0.33mm thick of length 600mm and perimeter wall angle of size 24x24x0.40mm thick of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs @ 450mm center to center and 40mm long dry wall S.S. screws with and including 4 mm thick E-board false ceiling tiles of size 595x595mm of approved texture, design and pattern to be placed in the grid system duly suspended with 6 mm dia GI wire hangers fixed with steel dash fasteners or from purlin of the roof with clip complete all as specified and directed. |
| 93 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 94 | M & L for 100 mm thick Cement concrete 1:4:8,type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified. |
| 95 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; completeall as specified and directed. |
| 96 | M & L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings complete all as specified and directed. |
| 97 | M & L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate and mixed with 2% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement including demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.NOTE: (i)WPC shall measured and paid seperately. |
| 98 | Supply only Integral water proofing compound confirming to IS-2645-2003 of approved make. |
| 99 | Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) over roof surfaces, finished even & smooth without using extra cement complete as per manufacturer\"s instructions or as specified by Engineer-in-charge. |
| 100 | M & L for cleaning of all loose dirt and dust fromroof surfaces and applyingroof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces & laying of glass fibermesh 45 gsm over tacky surface and allow it to dry.(b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total comsumption having below properties:-1. Elongation - 500%-600%2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm.Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.allas specified and directed. |
| 101 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as inplinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).Complete all as specified and directed. |
| 102 | (a)Taking down plaster and Clean the floor suface & wall for treatment by removing dust , dirt and loose particles over the surface etc by mechanical means.(b)Providing & applying the Water based silicon water replient and injection system confirm IS 2645-2003with solid content 35% and lilica content 18% . It shall be mixed with wateras per suface like Concrete surface 1:10and brick / block work. 1:10 as per manufacturer\"s specifications.(c)Providing & Applying one coat of modified Cementitious bonding agent / waterproofing coatiing treatement over the treated area of water repellent mixed with 1 part cement and 1 part Latex SBR/Bond SBR.(d) Providing with an laying waterproof plaster of average 15-20mm thick to the walls mixed cement mortar (1:6) admixed with an integral waterproofing compound confirm to IS 2645 @ 200 mll 50 Kg cement as per manufasturer\"s specifications. |
| 103 | Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets etc and making good disturbed surfaces even and smooth using CM 1:3 including white/colour wash to match the existing surface complete. |
| 104 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm and earth continuity conductor with 1.5 sqmm using colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1.0 mm thick and modular mounting cover plates with frame of approved colour for mounting modular switches, sockets etc as required for the following:- One light / fan point controlled by one switch with cable size 1.5 sqmm. |
| 105 | One 3 pin socket outlet 06 Amps point on the same board with other switches. |
| 106 | One 3 pin socket outlet, 06 Amps on independent board. |
| 107 | One 3 pin socket outlet, 16 Amps on independent board with cable 2.5 Sq mm size. |
| 108 | One bell/buzzer point controlled by one bell push. |
| 109 | S&F modular angle holder, insulated polycabonate body with frame complete. |
| 110 | S&F modular switch, single pole, one way 6 Amp, 230 Volts, 1 module complete. |
| 111 | S&F modular switch, single pole, 1 way 16A, 230 V,1 module complete. |
| 112 | S&F Modular Bell push 6A, 1 module complete. |
| 113 | S & F Call bell, AC, 230 volts, single polecomplete. |
| 114 | S&F modular socket, single pole, 3 pin 6 Amp, 230 Volts, combined 2 module complete. |
| 115 | S&F modular socket, single pole, 3 pin 6/16 Amp, 230 Volts, combined 2 module complete. |
| 116 | S&F modular white cover plate with frame, 1 module complete. |
| 117 | S & F modular white cover plate with frame, 2 module complete. |
| 118 | S & F modular white cover plate with frame, 3 module complete. |
| 119 | S & F modular white cover plate with frame, 6 module complete. |
| 120 | S & F modular white cover plate with frame, 8 module complete. |
| 121 | S&F in replacement MCCBfour pole, 125 A, 16 KA (Icu=Ics) thermally adjustable between 70 to 100% including spreader link (set of 4) for connection, lugs etc as required. |
| 122 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, IP 43 with test certificate complete without MCB and with enclosure blank plates for unused way complete.Note:- MCBs & MCB DBs shall be of the same make. |
| 123 | S&F Ceiling rose, three terminals, polycarbonate body complete. |
| 124 | M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES SSR Part-I(2009) connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4type B-1, earth pit cover 40 mm thick reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. |
| 125 | Taking down electric meter and refixing same on new bakelite sheet after rewiringin replacement of unservicable wire complete. |
| 126 | Supply and fixing BLDC ceiling fan 1200 mm sweep with powder coated aluminium blades dust free Min air delivery 220 m³/min, Power consumption 28-30 Watts, star rating (BEE) Five star, 350 RPM with down road as per site requirement alongwith connected accessories incl provn of connection with PVC three core copper wire cable of 1.5 Sqmm from ceiling rose to fan, Min 02 years product warranty and 05 years motor warranty complete.Note :- Old Ceiling fan shall be deposited to AGE E/M (West) store Yard for BER Procedure. |
| 127 | S&F of exhaust fan, Metal body, AC single phase, 230 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with PVCthree core copper cable andCutting, opening circular in shape hole on wall for fixing of exhaust fan of size 300 mm sweep incl plastering and making good the disturbed surface surrounding complete. |
| 128 | Supply & fix Exhaust fans, plastic body, AC, single phase, 230/240 V of size 250 mm sweep including suitable louvers and making connection with PVCthree core copper cable, fitting on wall, including Cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 250 mm sweep incl plastering and making good the disturbed surface surrounding and all necessary fixing accessories complate. |
| 129 | M&Lin replacement for Submain wiring with two single core unsheathed, PVC (FRLS) insulated, 1100 Volts grade cable with 4.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLS) insulated, 1100 Volts grade cable with 4.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete. |
| 130 | M&L in replacement for Submain wiring with two single core unsheathed, PVC (FRLS) insulated, 1100 Volts grade cable with 6.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLS) insulated, 1100 Volts grade cable with 6.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 25 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete. |
| 131 | S&F in replacement of MCB SP 240 volts of 06 to 32 Amps, 10 KA, \"C\" Curve complete. |
| 132 | S&F in replacement of MCB SPN 240 volts of 40 Amps, 10 KA, \"C\" Curve complete. |
| 133 | Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10 W, 6500 K, 230V ,100 lumens/watt, with extruded aluminium housing & integrated electronic driver completeincluding Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete. |
| 134 | Supply and Fixing wall/surface mountingluminaires integrated LED Batten 20/22 W, 6500 K,120 lumens/watt, 230V with extruded Aluminium housing4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete. |
| 135 | Supply & fixing Decorative wall light fixturemade up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish,with 01 No. 12 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete.( Note: Rates incl 01X 12 W LED Bulb with each fitting). |
| 136 | S&F LED 9 Watt Lamp 6500K, pin type (B22) as required complete. |
| 137 | S&F Modular AC BOX Power unit with Socket Plug top and MCBs with Single pole and neutral enclosure with a two pin and one pin for earth plug and socket complete with one single pole MCB 16 Amp complete. |
| 138 | S&F in replacement of double door VTPN 4 way, IP 43, IK 09 suitable for 4 pole, MCCB 125A, 415 V as incoming & SP/TP MCB as outgoing 250 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete. ( Note: MCCB & MCB to be measured and paid seprately) |
| 139 | S&FLED Building security light 25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07with 4 KV inbuilt surge protection potted driver including Electrical connection with PVCthree core copper cable & all necessary fixing accessories such as bracket of GI pipe light grade 32/40 mm dia 1.2 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete. |
| 140 | Supply & fixingbulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 10 W LED,6000K , 120 lumens/watt including inbuilt electronic driver complete. |
| 141 | Taking down water heater (Geyser) 25/50 ltr capacity or any typeand refixing after spray painting & writing the MES No and 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible PVC pipe of size 15 mm, 450 mm length complete. |
