Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos Cement (corrugated, semicorrugated etc) sheets in roof covering complete all as directed. |
| 2 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa & minimum AZ 150 gm/sqm (coated with hot dip alloy of 55% aluminium, 43.5% Zinc, 1.5 % Silicon and finished with resin coat on both surface @ 150 gm/sqm of coating bot surface) as in roof covering/cladding to wall, fixed with self tapping screws complete all as directed. |
| 3 | S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa & minimum AZ 150 gm/sqm (coated with hot dip alloy of 55% aluminium, 43.5% Zinc, 1.5 % Silicon and finished with resin coat on both surface @ 150 gm/sqm of coating bot surface)as in ridge, fixed with self tapping screws complete all as directed. |
| 4 | Taking down complete existing treatment of roof/ parapet ,Mud puska on roof /parrapet including plastering, brick tiles, stone slabs and leeping any thickness including removal etc complete all as directed. |
| 5 | Taking down cement or cement lime plaster at any positionincluding raking out joints, hacking for key and scrubbing down with water complete all as directed. |
| 6 | M&L for Rendering 15mm thick on brick or concrete surface in Cement mortar (1:4) finishing external surface even and smooth w/o using extra Cement complete all as directed. |
| 7 | M&L for 15mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished complete all as directed. |
| 8 | M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as directed. |
| 9 | M&L for preparation of new plastered wallsurface applying two coat of wall care putty to make the entire surface free from undulations complete all as directed. |
| 10 | M&L applying two coats of cement based paint afteralkali resistant primer including preparation of newly plastered surfaces on wall complete all as directed. |
| 11 | M&L applying two coats of cement based paint including preparation of old plastered surfaces on wall complete all as directed. |
| 12 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 13 | M&L for Preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 14 | Dismantlingfloor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 15 | M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cilletc complete all as directed. |
| 16 | M&L Vitrified ceramic tiles Light shade 9-10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed In white or coloured cement to match the shade of tiles, laid over and including 15mm thick cement screed base in CM (1:6), complete all as directed. |
| 17 | - ditto- all as perser item no 16 above including 10 mm thick cement screed bed in CM (1:6) but on vertical surface such as skirting/ risers etc. |
| 18 | Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as directed. |
| 19 | M&L for Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as directed. |
| 20 | Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking off shutter from frame incl removing from site complete all as directed. |
| 21 | Taking down chowkhats or frame exc 1.50 Sqmbut n.exc 4 sqm each with shutter without taking off shutter from frame incl removing from site complete all as directed. |
| 22 | Taking down shutters of any description n exc 1 sqm and removing from site complete all as directed. |
| 23 | Taking down shutters of any description exc 1 sqmand n. exc 2 sq m each and removing from site complete all as directed. |
| 24 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, window and ventilator shutters ,grill, fixed / sliding track two or three trackincluding frames ,glazing clips , cleatsside hung type without sash bars, fixed window, ventilators etcwith one or more rebates including joining cleat for fixing etc. complete all as directed. |
| 25 | S&F 4 mm thick plain sheetglass type and glazing fixed in aluminium frame work exc 0.5 Sqm in each pane etc complete all as directed. |
| 26 | S&FGalvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as directed. |
| 27 | S&F in repair brass CP bracket fancy type suitable for fixing to 25mm dia curtain rod complete all as directed. |
| 28 | S&F in repair Stainless steel tubing of 19/20 mm bore, 1.00mm wall thickness as in curtain rod complete including fixing brackets, stops etc. complete all as directed.Note: For the purpose of measurement and payment running length of curtain rod only shall be considered. |
| 29 | S&F Aluminium anodised barrel tower bolt extruded section and fixed of size 200mm complete all as directed. |
| 30 | M&L for aluminium 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or aluminium alloy and fixed complete all as directed. |
| 31 | S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as directed. |
| 32 | S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 complete all as directed. |
| 33 | Dismantling wall and ceiling boarding of anydescripion , thickness incl. cover fillets complete all as directed. |
| 34 | S&F for providing aluminium snap Grid frame work for false ceiling with of size 605 mmm X 605 mm using Main and cross tee of size 36.5mm X25mm X1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia GI wire, J bolts, nuts and washers as per manufacturer\"sinstructions complete all as directed. |
| 35 | S&F Non asbestos fibre cement building board 4 mm thick in ceiling fixed or laid/inserted to timber /GI/Aluminium frame work with screw complete all as directed. |
| 36 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness (above or below GL) complete all as directed. |
| 37 | M & L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge complete all as directed.Note: 10mmwideand 75mm deep joints shall be made at 3 mtr intervel andat each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3 complete all as directed. |
| 38 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded with 20mm CM (1:6)and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing in flooring complete all as directed. |
| 39 | M&L Granite (of any type) tiles 20mm thick machine cut,in skirting/dado laid over cement screedbed with 10mm CM (1:6)and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing in flooring complete all as directed. |
| 40 | Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons, etc complete all as directed. |
| 41 | M&L PCC 1:2:4 type B-0(using 12.5mm graded crushed stone aggregate) mixed with integral waterproofing chemical compoundmixed in proportion 200 millilitre per 50 Kg cement as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete all as directed. |
| 42 | M&L cutting 75 mm wide and 65 mm deep in brick wall / PCC block / RCC surface any location shaping horizontal facegrooves filled with PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate with and including water proofing chemical compoundmixed in proportion 200 millilitre per 50 Kg cement or as per manufacturers instructions laid when concrete is still green complete all as directed. |
| 43 | M&L Rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound@ 200 ml/50 kg of cement or as per manufacturar instruction finished even and smoothwithout using extra cement over roof / sunken slab /wall complete all as directed.NOTE : water proofing liquid will be measured and paid seperately. |
| 44 | M&L for Water proofing treatment on \"Non approachable / non accessible roof\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer complete all as directed (i) Applying approved bituminous based primer conforming to IS : 3384-1995 @ 0.3kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated. (ii) Laying APP (Atactic polypropylenePolymer Modified preffabricated membrane) water proofing membrane 3mm thick of weight not less than 3 kg/sqm with minimum 100mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps (iii)Applying two coats of bituminous based aluminium paint @ 0.3 kg/Sqm complete all as directed. |
| 45 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening all as shown on drawing complete all as directed. |
| 46 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing incl 3 Nos but hings 100 mm long for each door complete all as directed. |
| 47 | M&L for 4.8 mm thick plain sheet glass ordinary quality exc 0.50 Sqm ,if sheet glass is ground or obscured or frosted on one side in each pane complete all as directed. |
| 48 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area not exceeding 2.00 sqm each complete all as directed. |
| 49 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass complete all as directed. |
| 50 | Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof stainless steel wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as directed. Note: Glass or wiremesh shall be paid separately) |
| 51 | S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as directed. |
| 52 | S&F 150mm long overall length of cover plate floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as directed. |
| 53 | M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirtingetc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as directed. |
| 54 | M&L for joint free non skid colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as directed. |
| 55 | Demolition of cement concrete reinforced as in chullah hoods , shelves, cover slaband plate formetc complete all as directed. |
| 56 | M&L for RCC as in kitchen platform, shelves type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) including necessary form work complete all as directed. |
| 57 | M & L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed. |
| 58 | Taking up or down steel tubing and connection of 15 mm bore complete all as directed. |
| 59 | ditto all as ser item no 58 above but for 20 mm dia bore pipe. |
| 60 | ditto all as ser item no 58 above but for 25 mm dia bore pipe. |
| 61 | S&F steel tubing for 15 mm bore and connectiontubingin new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc for hot and cold water complete all as directed. |
| 62 | ditto all as ser item no 61 abovebut for 20 mm dia. |
| 63 | ditto all as ser item no 61 abovebut for 25 mm dia. |
| 64 | Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as directed. |
| 65 | ditto all as ser item no 64 above but 20mm bore. |
| 66 | ditto all as ser item no 64 above but 25mm bore. |
| 67 | S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as directed. |
| 68 | S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as directed. |
| 69 | S & F in repair for PVCconnection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as directed. |
| 70 | S&F in repair 15mm dia angle stop valves cast copper alloy fancy type,chromium plated complete all as directed. |
| 71 | S&Fin repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etccomplete all as directed. |
| 72 | S&Fin repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as directed. |
| 73 | S & F in repair, 15mm borebib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as directed. |
| 74 | S & F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as directed. |
| 75 | S&F in repair vitrious china wash basin, white flat back size 550 x 400 mmincluding waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete all as directed. |
| 76 | S&F vitreous china squatting pan \"ORRISA\" Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as directed. |
| 77 | S&Fin repairs 15mmdia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered \"Hot or Cold\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as directed. |
| 78 | Supply and fix shelf 450mm longof PTMT fixed with and incl chromium plated brass screws and wooden /plastic cleats (minimum weight 300 grams) complete all as directed. |
| 79 | S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm baw/size 410 mm x 330 mm x 160 m and including 38/40mm dia waiste pipe complete all as directed. |
| 80 | S&F CP towel rail, 20mm dia, D type, 60cm long complete all as directed. |
| 81 | M &L 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building boardor commercial ply wood and fixed to wooden ply with chromium plated brass screws and cup washers complete all as directed. |
| 82 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site complete all as directed. |
| 83 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as directed. |
| 84 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as directed. |
| 85 | S&F PVC (SWR) bends 110 mm bore of any radius complete all as directed. |
| 86 | S&F PVC (SWR) bends 75 mm bore of any radius complete all as directed. |
| 87 | S&F PVC (SWR) junction single (singleT) equal or unequal110mm bore provided with access door complete all as directed. |
| 88 | S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door complete all as directed. |
| 89 | S&F 110 mm bore PVC (SWR) vent cowl complete all as directed. |
| 90 | S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement complete all as directed. |
| 91 | S&F 110mm dia PVC (SWR)WC connector with lip ring complete all as directed. |
| 92 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm after complete all as directed. |
| 93 | M & L for applying two coats of oil bound distemper on newly plastered surfaces of ceilings after priming plastered and other surfaces with alkali resistant priming paint including necessary preparation of the surface complete all as directed. |
| 94 | M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper to ceiling complete all as directed. |
| 95 | M & Ltwo coat of wall care putty on surfaceincl preparation of surfaces to making the surface to receive,finishes including complete scraping of existing treatment complete all as directed. |
| 96 | M & Ltwo coats of oil bound distemper on newly preparedsurfaces complete all as directed. |
| 97 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete incl fixtures and fittings as switches, ceiling rose, pendant, regulator, sockets, light fittingetc. removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as directed. |
| 98 | M & L for Point wiringwith PVC insulated PVC unsheathed electric (FRLSH) cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including plastic laminated bakelite sheet cover of hylam board of 2.8 mm thick including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc for the following: |
| 99 | One lightpointcontrolled by one way switch. |
| 100 | One fan pointcontrolledbyone way switch. |
| 101 | One 3/5 pin socket outlet 5 Amp on the same board with other swithes. |
| 102 | One 3/5 pin 5 Amps socket outlet on independent board. |
| 103 | Allas per ser item No 98 abovebutwith 2.5 Sqmm (nominal area) FRLSH cable PVC for the 15 Amp 3/5 pinsocket power point including 2.5 Sqmm copper conductor green as colour for earth contineuity complete all as directed. |
| 104 | M & LSub main wiring two single core 4.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 4 SqmmPVC insulated unsheathedFRLSH multistanderd copper conductor cablefor earth wire drawnin & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm diaincluding taking down of existing conduit or batten complete and making good disturbed surface wall complete all as directed. Note : - Two runs of 4 Sqmm cable andone run of 4 Sq mm earth wire and one run of PVC conduit shall be measured as one unit length. |
| 105 | S&F switch piano flush type polycarbonate single pole one way 6 Amps complete all as directed. |
| 106 | S&F socket outlet polycarbonate 2 in 1, 3 pin 6 Amps flush type complete all as directed. |
| 107 | S&FCeiling rose 3 phase/PVC/polycarbonate, isolated body complete all as directed. |
| 108 | S&Fstepped type electrronic fan regulator flush type complete all as directed. |
| 109 | S&FLamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked) complete all as directed. |
| 110 | S&F 18 wattsurface mounted pressure dia cast aluminium luminaire in powder coated whitefinish in round shape LED lights (Warm white) ,including electronic driver ,connected accessories complete all as directed. |
| 111 | S&F Inveter LED bulb of capacity12 watts ,3 star,(ISI marked) complete with all accessories base complete all as directed. |
| 112 | S&FLED bulb of capacity 10 watts (ISI marked) complete with all accessories complete all as directed. |
| 113 | S&F socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type complete all as directed. |
| 114 | S&Fswitch piano flush type polycarbonate single pole one way 15 Amps complete all as directed. |
| 115 | S&F LED Tubelight fitting1x18/20 Watt surface and wall mounted LED batten(warm white), PVC housing with polycarbonate diffuser & integrated electronic driver complete with all accessories internally prewired and incl connecting upthree core single wire complete all as directed. |
| 116 | Supply and fixof LED batten Integral 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as directed. |
| 117 | S&F LED (Warm white) luminaries 600 mm x 600mm, 42 watt, 220 Volt ,AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed. |
| 118 | S&F for Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way IP 43 (double door) with suitable Amps rated copper bus bar neutral bar ,earth bar,triple pole and neutral 415volts ,flush to wall including taking down carefully existing UNSV main switches, DBS along with MCBs complete all as directed. |
| 119 | Supply and fixing 415V 10KA \"C\" curve TPN 100 Amp capcity in the DB complete with connection complete all as directed. |
| 120 | S&Fof double door SPN distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 415 Volts 200 amps rated busbar 8 way complete all as directed. |
| 121 | S&Fof double door SPN distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 415 Volts 200 amps rated busbar 12 way complete all as directed. |
| 122 | M&L for MCB single pole,6 to 32 Amp 240 volt \"C\" curve 10 KA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35Sqmm cross sectional area completeincluding suitable sizecopper Lugs complete all as directed. |
| 123 | S&F Miniature circuit breakers ISI marked 240 Volt, 50 Hz, SPN 40 Amps, breaking capacity 10 KAcomplete all as directed. |
| 124 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed. |
| 125 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connectingto main switch or switch boardcomplete and incl PCC masonry pit of 300x300x300mm interier diamentions in PCC 1:2:4 type B1 RCC cover with GI frame, charcoal dust and common salt 15cm in layers all round the earth plate, 20mm dia GIwatering pipe, a funnelwith wire mesh should be provided on top of watering pipe complete all as specified as per electric plate No 3of SSR 2009 including testing after completion complete all as directed. |
| 126 | Supply and fixing building security lights with new generation energy saving & environment friendly long life versatile pressure die-cast aluminium IP65 roadway luminaries with high power LEDs as light source & exclusively designed polycarbonate cover along with electronic drivertype street light fitting 60 watt capacity LED and Including all accessories duly pre-wired, wall completeincluding taking old street light fitting any type and description complete all as directed. |
| 127 | S&F in repair of bracket made of GI light grade pipe 1.2 Mtr long of size 40 mm bore bend to shape as per site requirement fixed to pole/wall with 40 x 5 MM -02Nos, size clamps bolts, Nuts, washers including painting two coats of aluminium paint over a coat of primercomplete all as directed. |
| 128 | S&F LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 129 | M & LSub main wiring two single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of6.0 SqmmPVC insulated unsheathedFRLSH multistanderd copper conductor cablefor earth wire drawnin & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm diaincluding taking down of existing conduit or batten complete and making good disturbed surface wall complete all as directed.Note : -Two runs of 6 Sqmm cable and one run of 6 Sq mm earth wire and one run of PVC conduit shall be measured as one unit length |
| 130 | Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Ramgarh complete all as directed. |
| 131 | Labor only for refixing the ceiling fan/ Exhaust fan obtained from ser item No.131 above with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans/ exhaust fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writing the MES Number with synthetic enamel paint complete all as directed. |
| 132 | Supply and fixing LED flood light luminaries of 120W, with pressure die cast aluminium housing with sealed toughened glass cover in frame ,IP 65 protection andwith all fixing arrangement , nuts, bolts and washer connecting to electric system with 2.5 Sqmm PVC Aluminium stranded conductor 2 core up to require length and to be fixed on 11 Mtr longpole including taking down old unserviceable fitting any type and description complete all as directed. |
| 133 | Supply and fixing of exhaust fan electric single phase, AC 240 Volts, 50 hz, Steel body, 380mm sweep, 900RPMwith louvers and connecting with flexible PVC insulated multi stranded copper conductor wire of required sizefrom ceiling rose including cutting of wall and finishing of plaster complete including old/unsv taking down and deposit to AGE EM store yard complete all as directed. |
| 134 | S & F Chandilier, jhoumer material Crystal &iron Metal ,Hight 150 CM Dia-120CM , Warm white includung LED Bulb includingdecorative lights and provn for hanging in ceiling complete all as directed. |
| 135 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed. |
| 136 | Supply & fixin ceiling with nececessary required provn with MS hooks fabricated out of 50x6mmincluding nut, bolts (6-8 mm dia & 40 to 50 mm long with spring washer) complete all as directed. |
| 137 | S&L XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt gradecross sectional area 50 Sqmm and 3.5 core,including taking down of existing unserviceable service cable complete all as directed. |
| 138 | S&L XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt gradecross sectional area 16 Sqmm and 4 core,including taking down of existing unserviceable service cable complete all as directed. |
| 139 | Supply, laying and testing LT cable, XLPE Insulated ,armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 Sq.mm., 2.0 core including taking down of existing cablecomplete all as directed. Note:- 1. Excavation & earthwork shall be measured & paid under respective item (2) All Necessary T & P required shall be arranged by the Contractor. |
| 140 | M & L for Excavating in trenches, in any type of soilnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as directed. |
| 141 | M & L for Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as directed. |
| 142 | M & L for Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed. |
| 143 | M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all as directed.(Note:- Punning thickness shall be measured). |
| 144 | Material and labour for Supplying and laying un-reinforced pre cast concrete cable cover class LV, Type - 1 , flate, size 250 mm x 150 mm x 40 mmcomplete all as directed. |
| 145 | M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to GI earth strip of size 32x6 mm (upto 7.5 metre in length from earth plate) by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 40 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregateincluding excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as directed. |
| 146 | S&F of landscape cylindrical shape LED bollard light 10 watt IP 66 with integrated driver, including reqd PCC foundation and establishing on ground connecting to the existing cable and make it functional complete all as directed. |
| 147 | M & L DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 Sqmm 2/4 core and fixed to the PSC/Steel Poles by means of suitable size of clamps with nut ,bolts andincluding provn for fixing 01 no of single pole MCBs 6-32 amps,10KA and MCB TPN 6-32 amps, 10 KA, ‘B’ series = 01 No inside the box complete all as directed. |
| 148 | M & L for aluminium strip 25x3.15 mm with saddles, DNB insulator and fixing screws etc., for roof conductors and down condutors, complete all as directed. |
| 149 | M & L for Test point terminal block made up of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw, complete all as directed. |
| 150 | M & L for Air termination, single pointed aluminium rod 12mm dia and 300 mm long, with DNB insulators. complete all as directed. |
| 151 | M&L for laying GI tubinglight grade 40 mm dia with all fittings for cable protection including GI clamps nut bolts and washer etc complete all as directed. |
| 152 | Boring of holes under road, pavement, hard standing by using hand drillcomplete all as directed. |
| 153 | S&F 50 watt led Mono flood light , IP65, Green Colour, complete all as directed. |
| 154 | S&F 50 watt led Mono flood light , IP65,red Colour,complete all as directed. |
| 155 | S&F 50 watt led Mono flood light , IP65, Blue Colour,complete all as directed. |
| 156 | S&F 50 watt led Mono flood light , IP65, Yelow Colour, complete all as directed. |
| 157 | S&F 12 watt led spike light ,3000K,IP65, complete all as directed. |
| 158 | S&F 6 watt led spike light ,3000K,IP65, complete all as directed. |
| 159 | S&F 5 watt led spike light ,3000K,IP65,complete all as directed. |
| 160 | S&F 5 watt led spike light ,Red COLOUR,IP65, complete all as directed. |
| 161 | S&F 5 watt led spike light ,Blue colour,IP65, complete all as directed. |
| 162 | S&F 5 watt led spike light ,GREEN CLOUR,IP65, complete all as directed. |
| 163 | Supply, install, testing & commissioning factory made panel board , outdoor type, 3.15 mm thick sheet, weather and vermin proof, high quality polycarbonate modular encloser system ,conforming IEC 61439-1 with cable entry and for 200 Amps alimunium bus bar conforming to IP- 65, as per CPRI in accordance with IEC 60439-1 with and including the following equipments including earthling stids and necessary earth work excavation and PCC (1:2:4) type B1 foundation complete all asdirected:-(i) MCCB FP 160 A,16 KA-01 Nos, ICS 100 % of ICU or equivalent make of Hensel (as incoming)(ii) MCCB FP 100A, 10 KA-02 Nos, ICS 100 % of ICU or equivalent(as outgoing)(iii)MCCB FP 63A, 10 KA-03 No. (iv) Multifunction meter-01 Nos(v) \"RYB\" indicator LED lamps- 03 Nos(vi)Busbar 200 Amp - 01(vii) Timer Switch for street light-01 nos |
| 164 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail