|
| 1 | M&L rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:6finished even and smoothincluding Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including rootsup to 15 mtr heightcomplete all as specified and as directed by engr-in-charge. |
| 2 | M&L rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4finished even and smoothincluding Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including rootsup to 15 mtr heightcomplete all as specified and as directed by engr-in-charge. |
| 3 | M&L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smoothincluding Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 4 | M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete. |
| 5 | M&L for Preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of1 mm thick wall care putty and chalk whitingon plastered surfaces preparatory to distempering complete. |
| 6 | M&L for Complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats ofOil Bound Distemper over one coat of 1mm thick wall care putty up to 15 mtr height cmplete. |
| 7 | M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade up to 15 mtr height cmplete all as specified and directed. |
| 8 | M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface up to 15 mtr height cmplete. |
| 9 | M&L for preparation of oldsteelsurfaces with complete removal of existing treatment and appliyng one coats of synthetic enamel paint coloured as approved by EIC over a coat of red oxide over a coat of red oxide up to 15 mtr height cmplete. complete all as specified and directed. |
| 10 | S&F in repairsfor gypsum ceiling board for ceilingprepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25mm x 24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed. |
| 11 | S & F prelaminated fire resistance PVC rigid foam sheet wall panelling of 5mm thick stck on inner frame of work of 35mm wide strip of 5mmm thick rigid foam sheet . The strip should have a groove of 6mm width and 2mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300mm c/c. The PVC strips to be fixed to the all using 65mm long MS screw through the groove in the strip using PVC fasters including necessary moulding work on doors, windows, pillars and opening etc.complete all as specified and directed.Note :- (a) Work for fixing of wall panelling shall be got exeduted through manufacturers authorised appllicators only under the close supervision of their techanical staff.(b)The entire quantity of wall panelling and their ancillaries shall be procured directly from the manufacturer or their authorised dealer only. |
| 12 | M&L WPC acoustic wall panelling of approved colour for indoor/outdoor wall 100% nontoxic, non feraldelyers, water proof, termite proof, anti-UV using necessary stainless steel clip/fixing arrangement including corner patti or moulded beading of same materials including dismantling of pannels all as specified and directed. |
| 13 | Providing & fixing false ceiling at all heights with Semi perforated 12mm thick thick micro tegular edged GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 14 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 15 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 16 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated and 6mm thick glazing with selected quality glass. incl S&F Double action floor spring hydraulicallyregulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty.(Note: The unit rate quoted by contractor includes cost of 6.0 mm thickglass and other connected accessories. Net opening will be measured for payment purpose.) |
| 17 | S&F factory made three track UPVC sliding windows white in colour or as approved made of extruded profiles with wall thickness of 2.3mm ((+/- 0.20mm) Windows profiles with hollows section with multichamber.Frame size (88mmx52mm), Sliding sash (42mm x 67mm), sliding mesh sash (42mmx57mm), sliding interlock(one vertical length in each shutter) 45.5mmx28mm), glazing bead (24.5mmx16mm) will be mitered cut and fusion welded at all coeners, including drilling of holes for fixing of hardware and drainage of wateretc, making arrangement for fixing of hardware, EPDM, gasket, 1.2+/-0.20 mm thick galvanised steelframe (30mmx28mm) 2 Nos sliding sash (30mmx18mm), sliding mesh (26mmx10mm), profile to be inserted in required profile frame will be fixed to the wall with 8mm x 100mm long fastener hardware, (Touch lock of zinc alloyed (white powder coated), steel roller system stainless steel wire 0.36mm nominal dia of wire and average width of aperture 1.40mm, aluminium grill and required accessories), (Note: The unit rate quoted by contractor includes cost of 6.0 mm thickglass and other connected accessories. Net opening will be measured for payment purpose.) |
| 18 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 19 | S&F powder coated of any colour aluminium door shutters, aluminium section weighing 0.55 kg/m incuding necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos, tower bolt in each door shutter, hinges powder coated aluminum snap beading screws etc, inclS&F Door closer hydraulically regulated, Aluminium (Die cast) body designation No 3, universal type suitable for door shutters of 851mm to 1000 mm width and of weight between 61 to80 kg all as specified and directed.complete all as specified. |
| 20 | S&F powder coated of any colour aluminium window and ventilator shuttrs, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading screws etc complete all as specified |
| 21 | S&F 4-5 mm thick sheet glass paneordinary quality and glazing with rubber beading and aluminium glazing clip/patti area n.exc 1.00 Sqm each pan. |
| 22 | S&F fibre glassreinforced plastic (FRP) door frame, three legged of cross section 90 x 45mm having single rebated of 32 x 15mm to receive shutter of 30mm thickness.The laminate shall be moulded with ffire resistant grade un-saturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall befiled with suitable wooden block in all over frame. The frame shall be covered with fibre glass from all sides includingMS stay shall be provided atthe bottom to steady the frame complete all as specified and directed. |
| 23 | S&F factory made solid FRP door shutter, 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retavdant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminated for panels and confirming to IS-14856-2000, including fixig to frames complete all as specified. |
| 24 | S&F in repair WPC Jaali 18mm thick any design and colour as directed by Engineer -in -charge complete |
| 25 | S&F in repair frame work ofWPC size of frame 75mmX50 mm all as per direction of Engr-in-charge. |
| 26 | S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete. |
| 27 | S&F in repair 100 mm size butt hinges, extruded aluminum alloy with galvanised mild steel ISI marked. |
| 28 | S&F mild steel pressed steel handle, oval type, stove enamelled black 150 mm long complete all as specified. |
| 29 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete |
| 30 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete. |
| 31 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floorsincluding taking up or down steel tubing and connections complete. |
| 32 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings |
| 33 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof complete all as specified. |
| 34 | Dismantling of AC sheet (corrugated/semi corrugated etc) in roof or wall of any description including false ceiling below roof sheet etc at height upto 15 metres complete all as specified anddirected. |
| 35 | S&F 0.50mm plain, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet galvanised,mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and welded or soldered joints are provided as requried complete all as specified and directed. |
| 36 | Providing and fixing 4mm thick aluminium composite panel (ACP) exterior grade (0.5mm PVDF coated Aluminium skin on top & bottom plus 3mm thick polyethylene core) on/all-round RCC/Brick column/ wall/ Fascia\"s/ M.S. section/ Aluminium section structure/ dead walls/under side sky light upto all height in required colour/pattern & panel size as (Area of panel shall not more than 0.60Sqm as per drawing fixed on aluminium extruded standard tubular section of size 38 x 25 x 1.6mm of approved make (Jindal/ Hindalco/ Indalco) conforming to IS;733 and IS; 1285, fixed at 600m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm (wide) x 20mm (deep) groove in joints or panels including filling the joints with weather silicon sealant of Dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking tap, primer/ gasket/ foam/ scaffolding/ cluding 10mm dia backer rod,The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/ gasket/ foam/ scaffolding/ Aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all necessary tools and plants, scaffolding and as per manufacturer\"s technical specifications, including dismantling of old sheet complete and as per the direction of the Engr-in-Charge (Surface area of aluminium composite panel shall be measured for payment. |
| 37 | Dismantling of Stone slabs and tiles of any description or thickness in floors/wall, aprons etc., laid bedded and pointed in any mortar complete all as speicified. |
| 38 | M&L for 75mm thick type-D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base to receive stone slab and pavement all as specified and directed. |
| 39 | M&L 20 to 25 mm thick machine cut Kota stone slab mirror polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slabcomplete all as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 40 | M&L 20 to 25 mm thick machine cut Kota stone slab polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 41 | M&L granite 18-20mm thick colour as approved (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or making oval shape hole for fixing of wash hand basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6including moulding and polishing the edges complete all as specified and directed |
| 42 | M&L granite 18-20mm thick colour as approved (of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of graniteincluding moulding and polishing the edges etc complete all as specified and directed |
| 43 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 44 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified. |
| 45 | M&L Viterified ceramic tiles 10 mm thick square/rectangular dark shade)granite or marble texture polished, area of each tiles not exceeding 0.36 sqm,in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed. Make :Somany ,KajarIa ,Orient |
| 46 | Ditto- but in vertical surface as skirting, dado and risers to steps over and including10 mm thickrendering/backing coat in cement mortar 1:4 etc. |
| 47 | M&LVitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchoverscreed bed or bedding layers of mortars 15 mm thick in CM 1:6all as specified and directed. |
| 48 | M&L glazed ceramic coloured tiles in vertical surface 450x350x7 or 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete allas specified & directed. |
| 49 | S&Froller blinds premium korean fabric/zebra roller blinds or as approvedto windows/openingincluding top and bottom frame/rail complete Including Dismantling of old Curtain blinds all as specified and directed. |
| 50 | M&L Water proofing treatment walls of bathroomconsisting of thefollowing operation including demolition/taking down old treatment :- (i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) Filling of all brick joints with cement mortar 1:4(iii) Applying a coat of Chemical Dr fixit Pidifin 2K (iv) applying fiber mesh setting with chemical Dr fixit PidicreteURP (v) final coating with Pidifin 2K and sprinking of sand(vi) After the surface dried, plaster the surface with CM 1:4 15 mm thick. (Note All water proofing treatment will be executed by the authorised representative of Dr fixit) |
| 51 | M&L Water proofing treatment on sunken floor consisting of the following operation including demolition/taking down old treatment :- (i) Cleaning of surfaces by wire brushing brooming removing dust particles. (ii) M & L PCC 1:2:4 type (Bo) using 12.5 mm graded stone aggregate 50 mm thick, finishing the surface even and smooth without using extra cement .(iii) Applying a coat of Chemical Dr fixit Pidifin 2K(iv) applying fibe mesh setting with chemical Dr fixit PidicreteURP(v) final coating with Pidifin 2K and sprinking of sand (vi) After the surface dried, screeding the surface with CM 1:4 15 mm thick including finishing even and smooth using extra cement. (Note All water proofing treatment will be executed by the authorisedrepresentative of Dr fixit). |
