|
| 1 | Dismantling water tanks exc 500 and not exc 1000 ltrs capacity and removing to store complete all as specified and directed. |
| 2 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 ltrs but not exceeding 500 litres complete all as specified and directed. |
| 3 | Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 4 | Taking down 20mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 5 | Dismantling Asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings including ridge complete all as specified and directed. |
| 6 | Dismantling framed timber scantling 40 sqcm and over in section and in any position complete all as specified and directed. |
| 7 | Dismantling wrought iron or work of any description and any places complete all as specified and directed. |
| 8 | Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc complete all as specified and directed. |
| 9 | Taking down chowkhat or frame withshutters without taking of shutters from frames not exc 1.5 Sqm each incl making good disturbed portion complete all as specified and directed. |
| 10 | Taking down chowkhat or frame withshutters without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqmeach incl making good disturbed portion including removing to store complete all as specified and directed. |
| 11 | Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 12 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 13 | Roughening surfaces/ hacking of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. |
| 14 | Demolition of unreinforced cement concrete in ground flooring and paving not exc. 15 cm thickness below or above ground level complete all as specified and directed. |
| 15 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 16 | Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete all as specified and directed. |
| 17 | Demolition of RCC of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 18 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed. |
| 19 | S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical verticalwith closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed. |
| 20 | S&F fixed in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and directed. |
| 21 | S & F in repair 20mm bore gate valves with iron wheels head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 22 | M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed. |
| 23 | Supplying and laying of 16mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 24 | Supplying and laying of 20mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 25 | M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated/ semi corrugated/ trapezoidal steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 26 | M&L for Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 27 | M&L for 2nd class hard wood in scantling clean sawn on sides framed complete all as specified and directed. |
| 28 | M&L, preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified and directed. |
| 29 | M&Lroof trusses (framed/ un framed) for purline, rafter, crane gantries, door frame, tubular/ rectangular/ square hollow section, rails and fastening and heavy bracket etc ( Beam, tee,angle iron or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde E- 250) quality A complete all as specified and directed. |
| 30 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 31 | M&L for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner \"T\" section of size 38mm x 24mm x 0.40mm thickness, Cross \"T\" of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 2 mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed. |
| 32 | M&L 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate including necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed |
| 33 | M&L 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate including necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and as directed |
| 34 | M&L for PCC type B0 1:2:4(12.5mm graded aggregate) for holdfast blocks and filling in door frames complete all as specified and directed. |
| 35 | M&L preparation of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 36 | M&L powder coated aluminium sliding window shutters with frames (consisting of two nos glazed shutters and one no gauze shutter) series-D (25mm) 3 track sliding shutters, duly fitted with neoprene beading glazing clip, locking device, heat absorbing glass 4 mm nominal thickness in glazed shutters, stainless steel wiremesh of 0.36mm nominal dia of wire and 1.18 mm average width of aperature in gauzed shutter complete all as specified and directed. |
| 37 | M&L fabricatedpowder coated anodized aluminium grill of size 75x75 mm, using 6mm dia bars fixed to outer portion of chowkhat using U/V section runners complete all as specified and directed. |
| 38 | M&L powder coated anodized aluminium frame for doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 39 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium fittings such as handles - 02 Nos, 100mm long hinges - 03 Nos, sliding bolt - 01 Nos, tower bolt - 02 Nos in each door, powder coated aluminium snap beading and rubber gasket, screws etc complete all as specified and directed. Note:Glass shall be measured separately. |
| 40 | M&L powder coated Anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No complete all as specified and directed. |
| 41 | M&L 4 mm thick one side frosted sheet glass ordinary quality and glazing in square n.exc 0.5sqm in each pane fixed with neopunerubber gasket in aluminium frame complete all as specified and directed. |
| 42 | M&L 4.80 mm thick sheet glass ordinary quality and glazingeach pane fixed with neopunerubber gasket in aluminium frame work complete all as specified and directed. |
| 43 | M&L 9 mm thick Pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws complete all as specified and directed. |
| 44 | M&L 35mm thick second class hardwood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 45 | M&L 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 46 | M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 47 | M&L stainless steelwire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed. |
| 48 | M&L Solid PVCdoor frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawings complete all as specified and directed. |
| 49 | M&L Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face with particle board core complete all as specified and directed. |
| 50 | S & F 100 mm Butt hinges, medium weightcold rolled, stainless steel and fixed complete all as specified and directed. |
| 51 | S&F200mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed. |
| 52 | S&F150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed. |
| 53 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed . |
| 54 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 55 | S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 56 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 57 | S&F in repair, for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 58 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 59 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 60 | S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 61 | S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 62 | S&F in repair PVC (SWR) Bend radius any radius 75mm bore complete all as specified and directed. |
| 63 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 64 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 66 | S&F in repair, 600 mm x 450 mmsize bevelled edge mirror of selected quality glass, 5.50 mm thick, mounted on 6mm thick AC pain buildingboard or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and directed. |
| 67 | S&F in repair, CP soap dish fixed to wall with screw complete all as specified and directed. |
| 68 | S&F in repair,20 mm dia Aluminium anodised tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 69 | S&F in repair, brass chromium plated shower rose 125mm size with or with out swivel joints, any size including fixing to steel pipe or union complete all as specified and directed. |
| 70 | S&F in repair chromium plated hand shower (health faucet), telephonic type with 8mm dia, 1 meter longpvctube coverCP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. |
| 71 | S&F in repair, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unionscomplete all as specified and directed. |
| 72 | S&F in repair, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unionscomplete all as specified and directed. |
| 73 | S&F in repair, 15 mm bore chromium plated fancy type long boby bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 74 | S&F in repair angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 75 | S&F in repair, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed completeall as specified and directed. |
| 76 | S&F in repair, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 77 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings symphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified and directed. |
| 78 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap(excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete all as specified and directed. |
| 79 | S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with chromium plated or aluminised hinging device complete all as specified and directed. |
| 80 | S&Fin repair Vitreous China Half Stall urinal flat back, size of 600 x 395 x 365 mm white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but including connection to flushing pipe and outgoing pipescomplete all as specified and directed. |
| 81 | S&F in repair vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) &including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed. |
| 82 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 83 | S&F in repair vitreous china wash hand basin of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 84 | M&L for preparation of old painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed. |
| 85 | M&L for preparation of old painted surfaces of steelof any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 86 | M&L forcomplete removal of existing treatment of surfaces and applying 1.5mm thick Birla or equivalent wall puttyto oldplastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 87 | M&L for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 88 | M & L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 89 | M&L for Brick work with sub-class `B\" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed. |
| 90 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed. |
| 91 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding complete all as specified and directed. |
| 92 | M&L for Vitrified Ceramic coloured tiles 8-10 mm thick (square/ rectangular)polished, area of each tilesnot exceeding 0.36 sqm, infloors etc.laid over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 93 | M&L for Vitrified Ceramic coloured tiles 8-10 mm thick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in skirting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 94 | M & L for non skid coloured ceramic floor tiles of size of tile exc. 0.11 but n.exc.0.18 sqm each 7 -8mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6,set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 95 | M & L for colour glazed ceramic wall tiles of size 450x300x6-7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall. cement screed bet set and jointed in neat cement slurry and pointedin white or coloured cement to match complete all as specified and directed. |
| 96 | M & L Machine cut kota stone slab flooring 20 -25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabincluding 20 mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified including rubbing and polish complete all as specified and directed. |
| 97 | M & L Kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed including rubbing and polish complete all as specified and directed. |
| 98 | M&L for Granite (of any type) tiles 16 -18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:6, including grinding and polishing completeall as specified and directed.. |
| 99 | M & L for PCC (1:3:6) , type C2 (using 20mm graded crushed stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including formwork if requiredcomplete all as specified and as directed. |
| 100 | M&L for75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed. |
| 101 | M & L chequered coloured cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 102 | M&L 10 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces on wall complete all as specified and directed. |
| 103 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement with using complete all as specified and directed. |
| 104 | M&L for 10mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces without using extra cement on ceiling complete all as specified and directed. |
| 105 | M&L forpreparation of new surfacesapplying two coats of oil bound distemper over a coat of alkhali resistant primer over a coat of wall care putty 1.5 mm thick complete all as specified and directed. |
| 106 | M&L preparation of newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 107 | M&L forpreparation of newly plastered cement concrete surfaces on ceiling of roof of buildings andapplying three coats of white wash on roof ceiling etc complete all as specified and directed. |
| 108 | M&L for5mm thick PVC sheet fillet of width35mm for wall panelling inclusive offixing on to wall to make PVC Frame asper specification and drawing complete all as specified and directed. |
| 109 | M&L Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement, PVC strips/beadings any sizes/shapes and fixing at site on PVC frame as per manufacturers specifications and drawing etccomplete all as specified and directed. |
| 110 | M&L for PCC 1:2:4 type B1 (using 20mm graded stoneaggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including bituminium gap filling necessary form work complete all as specified and directed. |
| 111 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets ,removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc complete all as specified and directed. |
| 112 | M& L for Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing caping/ PVC Conduit(ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams alongwith 1.5 Sqmm (nominalarea) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boardswith sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement complete all as specified and directed. for the following:- (a)One light point or one fan point controlled by one switch with cables 1.5 sq. mm sizeNote:-Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 113 | All as per ser item No. 112 above, but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed. |
| 114 | All as per ser item No. 112 here in before, but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified and directed. |
| 115 | All as per ser item No. 112 here in before, but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified and directed. |
| 116 | S&F in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish complete all as specified and directed. |
| 117 | S&F in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 118 | S&F in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 119 | S&F in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified and directed. |
| 120 | S&F LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as per site requirement complete all as specified and directed. |
| 121 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including suitable hole in existing wall complete as per site requirement complete all as specified and directed. |
| 122 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 123 | S&F in replacement LED panel light 36 watt efficient LED recessed luminaire 2 ft x 2 ft (>100 Lumen/Watt) to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for armstrong/ grid ceiling or similar ceiling mounting system with concealed complete all as specified and directed. Note : Rate for removing of existing unserviceable old luminaire is deem to be included in this item rates. |
| 124 | S&F in replacement stepped type electronic fan regulator Socket type on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 125 | S&F in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified and directed. |
| 126 | S&F in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main with colour code Red Black and Green. (ii)PVC conduit / casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 127 | S&F in replacement SPN distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB\"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified and directed. |
| 128 | S&F in replacement MCB SPN/DP 32 Amp rating 240V, 10KA \"C\" curve complete with connection testing and commissioning complete all as specified and directed. |
| 129 | S&F in replacement MCB SP 6 to 32 Amp rating 240V, 10KA \"C\" curve complete with connection testing and commissioning complete all as specified and directed. |
| 130 | M&L in replacement of Earthing complete withgalvanised steel earth plate electrode 60cmx60cmx6 mm thickness buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPMweightnot less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm,excavation and earth work in anytype of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete allto as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board complete all as specified and directed. |
| 131 | NOTES :-1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
