|
| 1 | Demolition of cement concrete (un reinforced ) of any description and in any position not otherwise specifically provided including removal of existing roof treatment of any type and any description complete all as specified and directed. |
| 2 | M & L for 40mm thick plain cement concrete type B1(1:2:4) ( using 20 mm graded stone aggregate) as in padding (level course) on roof finishing cement concrete surface even and fair complete all as specified and directed. |
| 3 | M & L for rendering 10 mm thick in CM (1:3) using water proofing compound@3% of weight of cement or as per manufacturer instruction as in roof and chajjas finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.Note : Water proofing compound will be measuredand paid separately. |
| 4 | M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed. |
| 5 | Material and labour forWater Proofing Treatment with APP based Standard Membrane over PCC padding in approachable roof with the following courses of treatment :(a) Apply bituminous primer ( IS 3384 ) @ 0.30 Kg per Sqm of the surface area including cleaning the surface complete all as specified .(b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (3.50kg /Sqm ) with 10 cm overlaps and torch bonded at joints including surface preperation before and after application of treatment as per manufacturers instruction complete all as specified and as directed. |
| 6 | M & L for PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggregate as in filling of sunken portion etc complete all as specified and directed. |
| 7 | M & Lfor rendering 15mm thick in cm 1:3 on brick work or concrete surfaces, and applying priming coat of NITO proof WB primer or euivalent product of M/sMC-Bauchemie/STP/CIPY/SIKA/ Pidilite/ Dr fixit/ Asian Paints/ Thermax applied as per manufacturers instruction to bottom and full vertcal sides of sunkun floors and all junction points of side and wall where CI/GI pipes are passing through shall be sealed with epoxy cement mortar complete all as specified and as directed |
| 8 | Dismantling ofwall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed. |
| 9 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed. |
| 10 | M & L for PCC (1:3:6) type C2 ( using 40 mm graded crushed stone aggregate) as in plinth protection of average 75mm thick including finishing cement concrete surface fair and evencomplete all as specified and directed . |
| 11 | M & L for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as below floor finish complete all as specified. |
| 12 | M & L for 40 mm thick plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as below floor finish complete all as specified and as directed. |
| 13 | Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed |
| 14 | M & L for10mm thick vitrified light shade doubly charged polished ceramic tiles (square/ rectangular),area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 15 | M & L for10mm thick vitrified light shade doubly charged polished ceramic tiles (square/ rectangular),area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed. |
| 16 | M & L for Non - skid Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 17 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 18 | M & L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 19 | Dismantling of stone slab of tiles of any description laid bedded and pointed in any motar complete all as specified and as directed. |
| 20 | M & L for granite work of any type 18-20mm thick ( of any type) work table rubbed & polishedin steps , jambs , pillar, widow cills, cooking platformsand laid over15mm thick screed bed or bedding in layer of in CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified. |
| 21 | Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed. |
| 22 | M & L for brick work with old size bricks straight or curved on plan exc 6m mean radiusbuilt in CM 1:6 complete all as specified and as directed. |
| 23 | M & L for brick work brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as directed and as specified. |
| 24 | Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed. |
| 25 | M & L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 26 | Material and labour for rendering 5mm thick in cement mortar (1:4) using WPC@3% of weight of cement used in top 5mm thick plaster or as per manufacturer\"s instruction over a layer of 10 mm thick in CM 1:6 on fair faces ofbrickwork or concrete surfaces, finished the surface even and smooth without using extracement complete all as specified and directed. |
| 27 | M & L for rendering 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smoothwithout using extra cement.complete all as specified and as directed. |
| 28 | M & L for prepartion of new plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including 3mm thick in (two coats) wall care putty complete all as specified and directed. |
| 29 | M & L for complete removal or existing wall treatment of old surfaces and applyingtwo coats of oil bound distemper over a coat of primer and 3mm thickwall care putty complete all as specified and directed. |
| 30 | M & L for Complete removal of existing treatment including preparation of surfaces incl filling all cracks with approved crack filler and applying two coats of exterior emultion weather proof paint complete all as specified.Note : water proof paint should be applied by roller brush only. |
| 31 | M & L for preparation of new plastered surfaces on wall and applying two coats of exterior emultion weather proof paint(APEX Ultima) over a coat of primer over 3mm wall care putty complete all as specified. Note : water proofpaint should be applied by roller brush only. |
| 32 | M & L for Complete removal of existing treatment including preparation of surfaces incl filling all cracks with approved crack filler of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer and 3 mm thick wall care putty complete all as specified and directed. |
| 33 | Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer and over a coat of 3 mm thick wall care putty complete all as specified and directed. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm eachcomplete all as specified and directed . |
| 35 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified and as directed. |
| 36 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length of (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 37 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 38 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 39 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton shutter of size35mm thick divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shuttersand comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.(Note: stainless steel wire mesh, butt hinges and necessary S.S screws shall be paid separately) |
| 40 | M & L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10 CM girth or widthcomplete all as specified and directed. |
| 41 | Providing and fixing factory made uPVC white colour Sliding window Three track of area not exceeding 2Sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 42 | S & F ing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of(Glass shall be paid separately) complete all as specified and as directed. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 43 | S&F 18 mm thick plywood BWR type fixed with screws with timber frameworkcomplete all as specified and directed. |
| 44 | Material and labour for 1 mm thick colour / white laminated sheet fixed to wooden surface with glue complete all as specified and directed . |
| 45 | S & F tinted glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips/beadings if required of any description complete all as specified and as directed. |
| 46 | S&F 100 mm long stainless steel butt hingescomplete all as specified and as directed. |
| 47 | S&F 150mm size stainless steel handles, fabricated type complete all as specified and as directed. |
| 48 | S&F 150mm long stainless steel barrel tower bolt of extruded section complete all as specified and as directed. |
| 49 | M & L for stainless steel sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified and as directed. |
| 50 | S&F floor door stopper of stainless steel body & tongue, with hard drawn spring of 140mm size fixed in floor complete all as specified and directed |
| 51 | S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed . |
| 52 | S&F continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified and directed. |
| 53 | S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polishedcomplete all as specified and directed. |
| 54 | S&F in repair 20mm dia Stainless steel Decorative type draphery curtain rods with brackets and side globes of approved quality for each length of rod complete all as specified and as directed . |
| 55 | S & F Stainless steel Telescopic type ball bearing drawer channel of any size complete all as specified and as directed. |
| 56 | S & F 100 mm long stainless steel decorative handle fixed with screws complete all as specified and as directed. |
| 57 | S & F 200 mm long stainless steel hinge for cabinets auto close , concealed type complete all as specified and as directed. |
| 58 | S & F Stainless steel kitchen basket of size 17\" X 20\" X 4\" size complete all as specified and as directed. |
| 59 | All as Item No-58 above but of size 17\" X 20\" X 6 \" complete all as specified and as directed. |
| 60 | All as Item No-58 above but of size 17\" X 20\" X 8 \" complete all as specified and as directed. |
| 61 | S & F Stainless steel dust bin holder 10 \" diacomplete all as specified and as direcetd . |
| 62 | S & F stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified and as directed. |
| 63 | S&F for brass mortoice lock with 4 lever vertical type size 100mm complete all as specified and as directed. |
| 64 | S & F in repair bathroom mirror cabinet PVC of size 400 X 500 mm fancy type complete all as specified and as directed .Make : Cat No-554 of Prayag or Hindware/parrywore. |
| 65 | S&F in repair CP Soap dish fixed with chromium plated brass screw complete all as specified and directed. |
| 66 | S&F in repairs toilet paper holder, vitreous china, box type coloured, fixed with chromium plated brass screw complete all as specified and as directed. |
| 67 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 68 | M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165 complete all as specified and directed . |
| 69 | M & L for applying two coats of synthetic enamel paint over a coatof red oxide, zincchrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed. |
| 70 | S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacitycomplete all as specified and as directed. |
| 71 | Supply & fixing in repair vitreous china wash basin oval type , white size 550x400mm embedded in grainite top and including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipecomplete all as specified and directed. |
| 72 | “S&F 600mm x 450mm seamless bevelled edge mirror mounted on stainless steel studs and fixed with ss screws on wall complete all as specified and s directed”. |
| 73 | S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Make : Cat No:CON-021KN of Jaquar or Hindware/Prayag |
| 74 | S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and as directed.Make : Cat No:CON-059KN of Jaquar or Hindware/Prayag |
| 75 | S & F in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed .Make : Cat No:ALD-579 of Jaquar or Hindware/Prayag |
| 76 | S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed. (Make : Prayag Cart Part No PIS-12 H) jaguar/prayag |
| 77 | S&F in repair three way wall mixer withhand shower connecting legs & wall flanges complete all as specified and as directed.Make : Wall mixer Cat No: FLR-5281 of Jaguar or equivalent & Hand shower Cat No: HSH-CHR-1781 of Jaguar or Hindware/Prayag |
| 78 | S & Fin repair 150 X150 mm overhead shower complete all as specified and as directed.. Make :Cat No:OHS-CHR-1605 of Jaquar or Hindware/Prayag |
| 79 | S & Fin repairshower arm 400 X 25 X25 mm square shape for wall mounted shower complete all as specified .Make : Cat No:SHA -455L400 of JaquarorHindware/Prayag |
| 80 | S & F in repairtubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges ofbrass chromium plated. |
| 81 | S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed (Make : Jaquar cat No ACN-CHR-1121S or Hindware/Prayag ) |
| 82 | S&F in repairs stainless steel grating of 125 mm dia chromium plate grating for nahani traps with or without hole for waste pipe complete all as specified and as directed. |
| 83 | S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and as directed. |
| 84 | S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc including taking down of old tubing of any description complete all as specified and as directed. |
| 85 | S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc including taking down of old tubing of any description complete all as specified and as directed. |
| 86 | Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified and as directed. |
| 87 | S&L in repairs CI floor trap with grating incl jointing to waste pipewith dia of outlet 75mm complete all as specified and directed. |
| 88 | Demolition and beaking up drain AC pipes/PVC pipes/CI Pipes set in cement mortar of any dia and size complete all as specified and directed. |
| 89 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 110 mm complete all as specified and as directed. |
| 90 | S&F in repairs PVC (SWR) bends 110 mm complete all as specified and directed. |
| 91 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 75 mm complete all as specified and as directed. |
| 92 | S&F in repairs PVC (SWR) bends 75 mm complate all as specified and as directed. |
| 93 | S & Fin repair 110 mm bore PVC (SWR) junction single ( single \"T\") equal or unequal complete all as specified and as directed. |
| 94 | S & Fin repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed . |
| 95 | Dismantling water tanksof exc 500 but n.exc1000 ltr capacity and removing to store complete all as specified and directed. |
| 96 | S&F of rotationalmoulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed. |
| 97 | S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed. |
| 98 | S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 99 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for slab,shelves etc complete all as specified and directed |
| 100 | Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed. |
| 101 | M & L for RCC typeB1 1:2:4 (using 20mm gradedcrushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 102 | S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed. |
| 103 | S&F in repairs sinks without drainage board made of stainless steel 1 mm thickkitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 104 | S & F in repair CP Quarter Turn Sink Cock with regular swinging spout ( wall mounted model ) with wall flange complete all as specified and as directed.Make : Cat No-FLR-5347N of Jaquar or Hindware/Prayag |
| 105 | Excavation in trenches n.exc 1.50 m wide and n.exc 1.50-m deep for foundation,etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft /loose soil complete all as specified and directed. |
| 106 | M & L for cement concrete type C2 1:3:6 (using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed |
| 107 | M & L for precast cement concrete block masnory with solid blocks exc.10cm in width using PCC 1:3:6 type C1 using 20mm graded crushed stoneaggregate set in CM 1:4 complete all as specified and directed. |
| 108 | M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded crushedstone aggregate) as in benching of man holes including forming centre channels half round or 1/4 section. complete all as specified and as directed. |
| 109 | M & L for 150mm dia Reinforced concrete pipes, class NP2 laid and jointed in CM 1:1.complete with collars complete all as specified and as directed. |
| 110 | M & L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150 mm bore. complete all as specified and as directed. |
| 111 | M & L for 15 mm thick rendering in CM1:4 on concrete surfaces finished fair and even and smooth without using extra cement. complete all as specified and as directed. |
| 112 | M & L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone aggregate as in cover slab for manholes etc.and set in cm 1:6 complete all as specified and as directed. |
| 113 | S & F mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking bending etc TMT bars. complete all as specified and as directed. |
| 114 | Returning, filling in incl spreading n levelling watering and well ramming in layers complete all as specified and as directed. |
| 115 | Removing excavated materials to a dist n.exc 50- m and depositing where directed at a level n.exc 1.50 m aabove the starting point. complete all as specified and as directed. |
| 116 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 117 | M & L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded crushed stone aggregate) as in subbase of floor complete all as specified and as directed. |
| 118 | M & L for chequered cement concrete tile 300 mm x 300 mm x 25 mm thick setjointed andpointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1:4 complete all as specified and as directed. |
| 119 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & patternover and including 50mm thick compactedbed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 120 | Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators etc and removal of unserviceable material out of site area complete all as specified and as directed. |
| 121 | Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified and as directed. |
| 122 | Taking down existing unserviceable MCB\"s/MCCB\"s/Distribution boards any capacity complete all as specified and as directed. |
| 123 | Taking down sub-main wiring of any description complete all as specified and as directed |
| 124 | M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal modular box of suitable sizes with 1.3mm thicknes for housing the modular switches, sockets, fan regulators etccomplete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etcfor one light point controlled by one switch complete all as specified and as directed.Note :- (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.(2) The cost ofcutting & chasesrequired width and depth for concealled conduit including PCC plastering, POP putty, making good to disturbed surface, distemper painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.(3) Three runs wire & one run of PVC conduit, Sunken box, modualr frames & connected accessories shall be measured as one point. |
| 125 | All as per Sl item No 124 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator complete all as specified and as directed. |
| 126 | All as per Sl item No 124 above, but for One 5 Ampssocket outlet point on the independent board complete all as specified and as directed. |
| 127 | All as per Sl item No 124 above, but for One 5 Ampssocket outlet point on the same board complete all as specified and as directed. |
| 128 | All as per Sl item No. 124 here in before, but for OneBell point controlled by one, bell push complete all as specified and as directed. |
| 129 | All as per Sl item No 124 above but for One light point controlled by two way switch complete all as specified and as directed. |
| 130 | All as per Sl item No. 124 here in before, but for wire 2.5 Sqmm for Power point. complete all as specified and as directed. |
| 131 | S & FModular switch 1 way 6A , 1-module complate all as specified and directed. |
| 132 | S & FModular switch 1 way 16A with indicator, 1-module complete all as specified and directed. |
| 133 | S & FModular socket, 6A - 3 pin 2 -module complete all as specified and as directed |
| 134 | S & FModular socket,6/16A -3/6 pin2-module all as specified and as directed. |
| 135 | S & FModular switch 2 way 6A,1 module complete all as specified and as directed. |
| 136 | S & FModular Bell push 6A 1 module complete all as specified and as directed. |
| 137 | S & FElectric Bell Ding-dong working on 230 volts AC Supply complete all as specified and as directed. |
| 138 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed. |
| 139 | S & F lamp holder suitable for B-22 base lamps insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed |
| 140 | S & F LED Bulbs 15 Watts suitable for B-22 base holders minimum 2 star rated complete all as specified and directed. |
| 141 | S & F LED Bulbs type 7 Watts suitable for B-22 base holdersminimum 2 star rated complete all as specified and directed. |
| 142 | S & F 20 W surface / wall mountedLED batten light fitting aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ PHILIPS BN308CLED20S-6500L120PSUWH / WIPRO LL31-251-XXX-65AL5/Havells ENDURALINEARPROBS20WLED865PCSSIND/Bajaj-BCLAB20WCWLEDXT |
| 143 | S & F 10 W surface / wall mounted 2 feet LED batten light fittinginput voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPROLL20-111-XXX-65NE3 /Bajaj-BCLAB10WLEDCWLED |
| 144 | S & F Decorative LED wall light fitting, made out of polycarbonate suitable for and including B-22 base LED Bulb 10 watt fixed on wall and making electric connection complete as sepecfied and directed by Engr-in-Charge.Make :-WIPRO-WL-WALLY-B22 / Havells-CITY-3 / Bajaj-BJLF4 7W TO 15 W |
| 145 | S & FLED Reading lamp 2 Module type suitable for single phase AC Supply, fixed on wall with the help of screws complete all as specified and directed.Make: Cat No. 6793 16 of Legrand/Havells/Bajaj |
| 146 | S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 45 W as light source complete with LED 45 W 5000Kincluding bracketsmade out ofGI pipe 25 mm dia light gradepipebent to shape incl 02 Nos MS flate clamps inclnut bolts connection complete all as specified and as directed.Make :- Crompton - TRP-409-45-57-SL-GL-NSG / Havells - ENDURASUNDOWNSL45WLED 765PASYBOPC/ Wipro - LR22-501-XXX-57-XX / Bajaj-VISTAP45LWHPOPCSDMake:Crompton TRP-409-45-57-SL-GL-NSG / PHILIPS BRP030LED35CWSLRGRPSUV1 / HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC/WIPRO LR22-501-XXX-57-XX/Bajaj-VISTAP45LWHPOPCSDe : Bajaj cat part No. ENXT P 24L WH CR PC SD, Crompto Cat No-LSTS-25-CDL-M, Havells Cat No-ENDURASUNDOWNSL25WLED 765PASYBOPCIHD. |
| 147 | S & F Vertical loadline type TPN DB 4 way double door with prov of MCCB as incoming 4P, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed . Make :- Havells, Legrand, Standard.Note :- MCCB shall be measured and paid separatly. |
| 148 | S&F MCCBs 415V, 16KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one complete all as specified and as directed. Make :- Havells, Legrand, Standard.. |
| 149 | S & F in replacement sheet metal enclosure MCB DBSPN 8 way, 240 volts double door with locking system complete all as specified and as directed . |
| 150 | S & F MCB SP 6 to 32 Amps 240 volts C- type complete all as specified and as directed |
| 151 | S & FMCB SPN 40 to 63 Amps 240 volts C- typecomplete all as specified and as directed |
| 152 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps complete all as specified and directed. |
| 153 | S & Fpower AC module 240V, 20A complete with 4 module metal flush box, cover plate, Starter, Plug & Socket complete all as specified and as directed. |
| 154 | M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated FRLSH multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 6 sqmm PVC insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. |
| 155 | All as per Item Sl No-154 above but using 3 runs of single core 4 sqmm. (for AC Point) complete all as specified and as directed. |
| 156 | All as per Item Sl No-154 above but using 3 runs of single core 1.5 sqmm. (for Bldg Security Lights) complete all as specified and as directed. |
| 157 | Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GIearth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on complete all as specified and as directed.(Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate). |
| 158 | S & F ing ceiling fans complete with blades,copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (≥)6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour complete all as specified and directed.Make:Gold Medal cat part no.SCFS 500748/Bajaj Cat part No:ENERGOS 28/ Crompton Cat part No:ENERGION RIVIRA/Havells Cat part No:PRO 28BLDC/Luker Cat part No:ECO28NEOBLDC Regulator 222cmm |
| 159 | Supply & Fix Electric water heater, storage type,vertical, single phase, electric operated, 50Hz,heating element up to 2 KW capacity 25 Ltrs, BEE 5 star ratedinnner tank as per OEM specification with minimum 2 years warranty on over all product (inner tank ,heating element & thermostat)complete with all accessories such as safety valve, thermostate, NRV, connection piece, FRLS multistranded copper conductor cable 3 core PVC insulated, plug top 3 pin 15 Amp, 15 mm dia, brass coupler, flexible pipe suitable to withstand upto 120 °C for hot and cold water, Anchor fastener- 04 Nos of suitable size etc. complete all as specified and as directed.Make :- Crompton VERSA 25L/ HAVELLS FABIA GHWAFATWB025/ Gold Medal SWMS01025VWH / Bajaj SPECTRUM15096625L/Luker-LPST25 |
| 160 | S & Fexhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep complete all as specified and directed.Make:Havells Cat part No:Vetil Air DX HS/Gold Medal EFS850310 AIR MAXX/Crompton VENTILUS250MM/Bajaj-Maxima neo/Luker cat part No:Viento LX10 |
