Tender For Replacement Of Asbestos Sheet With Pre Painted Galvalume Sheet And Other Connected Works Of Br Em In Bldg No T31 And T28 At Danapur Under Ge Danapur Cantt, Danapur-Bihar

TDR : 54150833

Tender Notice
BOQ

19 Days Left

Danapur , Bihar

Tender Brief : Tender For Replacement Of Asbestos Sheet With Pre Painted Galvalume Sheet And Other Connected Works Of Br Em In Bldg No T31 And T28 At Danapur Under Ge Danapur Cantt

Document Fees
₹ 500 /-

EMD
₹ 92800.0 /-

Tender Value
₹ 46.40 Lakhs /-

Submission Date
12-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
2	Dismantling of floor, hearth or wall tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed.
3	Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas etc
4	M&L for Glazed ceramic tiles (200x200mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.
5	M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc over and including 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.
6	M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete.
7	M&L for glazed ceramics coloured tiles of size 450x300x7mm thick on vertical surfaces such as skirting/dados/wall, etc over and including 10mm thick rendering in cmeent mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.
8	Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.
9	M&L Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
10	M&L Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall.
11	M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in fdn, sub base, mass concrete& cinder concrete etc. complete all as specified and directed.
12	M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protectionfinishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand ( all by weight) complete all as specified and directed.
13	M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and directed.
14	Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
15	M&L15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed.
16	M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer\"s instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed.Note:Liquid WPC will be measured and paid separately.
17	M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.
18	Supply only water proofing compound (liquid), ISI marked.
19	Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.
20	All as per above item No 19 but exc 1.5 Sqm and n.exc. 4 Sqm each.
21	Taking down shutter of any description exc 1 sqm and n exc 2 Sqm each and removing to store.
22	S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed.
23	S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed.
24	S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars, dovetailed or welded.
25	S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete without glazing bars, dovetailed or welded.
26	S&F steel ventilators with top hung shutters including hinges, steel peg stay complete.
27	S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.
28	S & F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.,complete all as specified and directed.
29	S & Fpressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.
30	M & L for plain cementconcrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar workd including necessary form work as required complete all as specified and directed.
31	S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specified and directed.
32	S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
33	S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long.
34	S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.
35	S&F 200 mm long aluminum anodised barrel tower bolts of extruded section as specified.
36	S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.
37	S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed.
38	S&F small fitings of 2nd class hard wood door, window stops and the likenot exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50mm long complete all as specified and directed.
39	S&FGI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.
40	S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.
41	Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed.
42	S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane.
43	S & F 3 mm thick figured glass pin head type and glazing with oil putty in squaresn exc 0.5 Sqm in each pane etc complete.
44	S&F 100 mm long hasp & staple aluminium anodised wire type,incl bolt to hinge plate and fixed with screw complete all as specified and directed.
45	S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 25 mm dia of any colour as approved complete all as specified and directed.
46	Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia.
47	Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia.
48	Supply & laying of CPVC pipes 20 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.
49	Supply & laying of CPVC pipes 25 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.Note for item No 48 to 49(i) CPVC fittings with brass threading will be measured and paid separately under respective items.(ii) Cost of normal SDR CPVC fittings Like Bend, Tee, Elbow, Union etc shall be inclusive under the quoted rate of pipes.
50	S&F of CPVC 20 mm Outer dia Brass Elbow complete.
51	S&F of CPVC 20 mm Outer dia Brass Elbow (3/4 x 1/2) complete.
52	S&F of CPVC 20 mm Outer dia Brass Tee complete.
53	S&F of CPVC 20 mm Outer dia male Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete.
54	S&F of CPVC 25 mm Outer dia male Brass threaded Adoptor (3/4 x 1/2) (MTA/FBTA) complete.
55	S&F of CPVC 20 mm Outer dia female Brass threaded Adoptor (3/4 x 1/2) (MTA/FBTA) complete.
56	S&F of CPVC 25 mm Outer dia female Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete.
57	S&F of CPVC 20 mm Outer diaBrass Tank Adoptor complete.
58	S&F of CPVC 25 mm Outer diaBrass Tank Adoptor complete.
59	S&F of CPVC 20 mm Outer diaBrass Union complete.
60	S&F of CPVC 25 mm Outer diaBrass Union complete.
61	Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete.
62	S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.
63	S&F in repair vitreous china squating pan \"Orissa\" pattern WC size 580x440 mm white with integral foot rest and trap andincluding connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.
64	S&Fin repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed.
65	S&Fin repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.
66	S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete all as specified and directed.
67	S&Fin repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.
68	S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete.
69	S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete.
70	S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia.
71	S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.
72	S&F in repair of stainless steel soap dish, of standard size and shape complete.
73	S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete.
74	S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed.
75	S&F PVC (SWR) \"P\" trap for 110 mm dia etc complete.
76	M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded aggregate) including necessary form work complete.
77	M&L for 20 mm thick granite slab (of any type) work(table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
78	S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.
79	Taking down AC/PVCpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mmdia pipe.
80	S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.
81	S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete.
82	S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.
83	S&F PVC (SWR) pipes 50mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.
84	S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete.
85	M/L PVC (SWR) bend of110mm dia of any radius etc complete all as specified and directed
86	S&F PVC (SWR) bends any radius provided with access door of 110 mm dia
87	M/L PVC(SWR) Tee of110mm dia etc complete all as specified and directed
88	S&F PVC (SWR) bends any radiusprovided with access door of 75 mm dia
89	S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with pareralled branches of 110 mm dia with access door complete all as specified and directed.
90	Same as above item No.89 but 75 mm bore.
91	S&F PVC (SWR) vent cowl 110mm bore.
92	S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete
93	S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia etc complete.
94	Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs complete all as specified and directed.
95	S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoistedand fixed in position as specified in SSR Pt-Iof 500 Ltr capacitycomplete all as specified and directed.
96	S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight20mm-210gms) complete.
97	S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete.
98	M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specified and directed.
99	M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.
100	Removing old paints by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete.
101	M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
102	M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
103	M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.
104	M & L for preparation of newly plastered surfaces ofwall & concrete and applying 2 mm thick wall care putty including preparation complete.
105	M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete.
106	M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete.
107	M&L preparation of new plastered or unplasteredsurfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
108	M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.
109	M&L for two coats of weather coat paint (apex) over a coat of primer on new surfaces of wall including preparation of newlyplastered surfaces complete all as specified and as directed.
110	Dismantling AC/CGI (corrugated/semi corrugated etc) sheet as in roof covering complete.
111	Dismantling unframed timber scantling 40 Sqcm and over in section, in any position complete all as specified.
112	S & F for rolled mild steel structural steel work as in trusses in (tubular/rectangular/square) including purlins, rafter, special shaped washer etc. completeusing any dia of MS pipe medium grade/angle or using ERW or induction butt welded tubes/angles conforming to I. S.1161-1979 gradeSt.-240 complete all as specified and directed.
113	M& LforPre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
114	M& LforPre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
115	M&L for Chequered cement concrete tiles (in any shade) 20cmx20cmx25mm/30x30x25 mm thick, set, jointed and pointed with grey cement and pigment in floors over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
116	M&L Water proofing treatment on \"Non approachable / non accessible and approachable roof\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete
117	Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm
118	Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.
119	Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard weight not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torched application complete all as specified.
120	Applying two coats of bituminous aluminium paintincluding preparation complete
121	M&L for hardcore of gauge exc 63 mm but not exceeding 100 mm (brick bats) deposited, spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface using broken bricks complete all as specified and directed.
122	Dismantling structural steel work including doors, gates but excluding framed truss etccomplete all as specified and as directed
123	S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Grade E 250 complete all as specified and as directed.
124	Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.
125	S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed
126	S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed
127	M & L for 6 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screwscomplete all as specified and directed. Make- Armstrong, Hunterdouglas etc
128	M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc over and including15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed in white cement mixed with pigmentsto match the shade of tiles complete all as specfied directed.
129	M&L for non skid ceramic colouredtiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 Sqmon vertical surfaces such as skirtings, dados etc, set and jointed in neat cement slurry and pointed in whitecement mixed with pigmentsto match the shade of tiles over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.
130	M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exc 0.11 sqm & not exceeding 0.18 sqm in floors etc over and including over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurryand pointed in white cement mixed with pigmentsto match the shade of tiles complete all as specified and directed.
131	M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete.
132	M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings,chajjas, shelves and similar articles with plain facesetc.with plain fair faces, includingchamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete.
133	S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0
134	S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as spd.
135	S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.
136	S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete.
137	S&F in repair Door closer hydraulically regulated cast iron body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as spfd & directed.
138	M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded aggregate) including necessary form work complete.
139	M&L for two coats of weather coat paint (apex) over a coat of primer on wall including preparation of oldplastered surfaces complete all as specified and as directed by Engr-in-Charge. (Make: asian, Durolex or equivalent)
140	M & L Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of3.00mm putty and including priming coat ofprimer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced by eng in charges.
141	M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and dirceted.
142	M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and dirceted.
143	M&L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.
144	M&L fortreatment of soil using emuision for post construction Anti termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.
145	S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed(a)chowkhat frame of size 83.50 x 44.45 x 1.87 mmthick weight @ 1.30Kg/RM(b)Style/Vertical member of size 47.62 x 44.45 x 1.90 mmthick weightn @ 0.911Kg/RM(c)Top and bottom rail of size 95.25 x 44.45 x 2.00 mmthick weight @ 1.511kg/RM(d)Middlerail of size 49.91x 44.45x 2.01 mmthick weight@ 1.072Kg /RM(e)Top panel with5.00 mm thick tinted glass fixing with rubber gasket.(f)Bottom panel with 5 to 6 mm thickAlumnium composite panel thickwith clips(g)100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter.(h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc.
146	S & F in repair powder coating aluminium window sliding shutter three track with following specification:-(a)chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM(b)Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM(c)Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM(d)Partialy 0.36 mm dia stainless steel wire netting mosquito proof aperature 1.40mm with fixing arrangment.(e)Partialy 5.00 mm thick tinted glass fixing with rubber gasket.(f) Aluminum beading and rubber gasket as per requirment as in fixing for paticle board & Glass, joining cleat including locking arrangement. etc
147	Taking down carefully aluminium point wiring(any type)for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendents holder, ceiling rose, sketch fittings, tube light fittings, regulatores unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxesand making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash all as specified and directed.
148	M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit \"medium grade\" ISI marked including all conduit accessories for concealed wiring for one light/fan/ / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting& making good disturbed surface & applying finishes to match existing surfacecomplete all as specified and directed.
149	Same as item No. 144 here-in-before but one 3 pin, 5amp socket out let onindependent board.
150	Same as item No. 144here-in before but 3pin ,5amp socket out let on the same board with other switch.
151	Same as item No. 144 above but for one bell/buzzer pointcontrolled by one bell push single pole one way .
152	Same as item No. 144 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.
153	M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0Sqmm (nominalarea) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit \"medium grade\" ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLStype PVC insulated unsheathed cable multi-strandedcopper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit &sinking for boxes & making goodto walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiringcomplete all as specified and directed.NOTE :Two runs of 6Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length.
154	M&L for sub main wiring withPVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x4.0 sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Note - Two runs of 4sqmm including one run of 4 sqmm including PVC conduit shall be measured as unit length.
155	S & F for switch piano, flush type, 5 amps, single pole ,one way , 230 voltcomplete all as specified and directed.
156	S & F bell push switch 5 Amp flush type complete all as specified and directed.
157	S & Ffor2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1complete all as specified and directed.
158	S & F for bell, ding- dong , AC, 230 Volt, single polecomplete all as specified and directed.
159	S&F switch socket combination 2 in 1, 6 pin16Amps multipurpose type 240 volts complete all as specified and directed.
160	S&Fceiling rose single phase , PVC poly carbonate,insulated bodythree terminals ISI marked complete all as specified and directed.
161	S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with suitable for1 x 63Amp TPNas incomer and MCB SPN as outgoing connection through proper size of lugs and cable glandsincluding taking down existing MCB DBscomplete all as specified and directed.
162	Supply and fixing 415V 10KA \"C\" curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 63 Amp in the DB complete with connection testing and commissioning complete all as specified and directed.
163	S& F for sheet metal enclousre factory made for MCB DB\"s SPN, 8 way, double door, 240 Voltsincluding taking down existing unserviceable MCB DB complete make -Havells all as specified and directed.
164	S&F MCB SP 240 Volt 6 TO 40Amp ISI marked conforming to \"C\" curve, breaking capacity 10 KA complete all as specified and directed.
165	S&F MCB SPN40 to 60 amp 30mA for earth leakage. Over load and short circuit protection ISI markedcomplete all as specified and directed.
166	M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m)as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm borefor protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-castRCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steelhandle 12 mmdia, PGIfunnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthingcomplete all as specified and directed. (Note:-The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.)
167	Excavation in trenches, not exceeding1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,laying of cables etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
168	Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
169	Supplying ,laying, commissioning & testingcross sectional area 35 Sqmm , 3.5 core XLPE cable insulatedarmoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existingold /unserveciablecable complete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item
170	S &F for 50 mm dia GI pipe \"light grade\" ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hardstandingincluding taking down existing pipe complete all as specified and directed.
171	M&L Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed.NOTE :Punned thickness only shall be measured.
172	Supply and laying dry well burnt locally available brick sub class\"B\" modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as spcified and directed
173	Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.
174	S&Fstepped type electronicfan regulator flush typeAC 230 volt suitable for any type of ceiling fan complete all as specified and directed.
175	Supply and fixing LED lights fitting 1x 20W, 220V,AC integrated type including driver, Extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser , 4 ft,voltage protection range 140V -270 V,NW 6500K ,,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Philips , Bajaj,Havells or equivalent.
176	Supply and fix Decorative, wall mounting, champagne fixture with plastic body including 9 W LED lamp B22 base wall light complete all as specified and directed.
177	Supply and fixing LED lights fitting 1x 10W, 220V,AC integrated type including driver, Extruded (enhances safety) with high quality polycarbonate diffuser , 2 ft,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
178	S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in and including GI pipe medium grade 40 mm fixed to pole complete all as specified and directed.
179	Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed including taking down old unsv one and deposit in MES store for BER.. Make- Bajaj/Usha/ Crompton Greaves/Havell\"s.
180	Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH complete all as specified and directed including taking down old unserviceable meter and deposite in MES store for BER.
181	Taking down carefully main switches DB\"s/ MCB DB\"s with MCB and making good the disturbed surfaces of wallsas directed.
182	M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit \"medium grade\" ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting& making good disturbed surface & applying finishes to match existing surfacecomplete all as specified and directed.
183	M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit \"medium grade\" ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 4 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting& making good disturbed surface & applying finishes to match existing surfacecomplete all as specified and directed.
184	supply .laying ,and fixing for alluminium unarmoured cable 1100V grade 16 sqmm 4 core in casing caping/ through saddle on wall complete all as specified and as directed. .
185	S & F Modular metal flush box 1/2 module
186	S & F Modular metal flush box 3 module
187	S & F Modular metal flush box 4 module
188	S & F Modular metal flush box 6 module
189	S & F Modular metal flush box 8 modules(Horizontal)
190	S & F Modular metal flush box 12 (3 row x4) modules
191	S & F modular white cover plate 1 module
192	S & F modular white cover plate 2 module
193	S & F modular white cover plate 3 module
194	S & F modular white cover plate 4 module
195	S & F modular white cover plate 6 module
196	S & F modular white cover plate 8 (Horizontal) modules
197	S & F modular white cover plate 12 (2 x 6) modules
198	Supply & fixingswitch modular flush type 6 amps, single pole, one way complete all as specified and directed.
199	Supply & fixing socket modular flush type suitable for 6 amp, 2/3 module combined 2 module complete all as specified and directed.
200	Supply & fixing switch modular flush type 16 amps, single pole, one way complete all as specified and directed.
201	Supply & fixing socket modular flush type suitable for 6/16 A, 2/3 pin combined 2 module complete all as specified and directed.
202	S&Fmodular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.
203	Supply and fixing 415V 10KA \"C\" curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 100 Amp in the DB complete with connection testing and commissioning complete all as specified and directed.
204	S& F for sheet metal enclousre factory made for MCB DB\"s SPN, 12 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete make -Havells all as specified and directed.
205	Supply & fixing fan regulator, modular type, socket type compatible for BLDC fans ,single phase complete all as specified and directed.
206	S & f single pole and neutral encl 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
207	Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type(enhances safety) with high quality polycarbonate diffuser , 4 ft,2000lm,voltage protection range 140V -270 V,NW 4000K ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Philips /bajaj or eqivalent.
208	Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency warm type PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roofceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Bihar Tenders

Construction Tenders

Building Construction Tenders

Shed Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Replacement Of Asbestos Sheet With Pre Painted Galvalume Sheet And Other Connected Works Of Br Em In Bldg No T31 And T28 At Danapur Under Ge Danapur Cantt, Danapur-Bihar

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Replacement Of Asbestos Sheet With Pre Painted Galvalume Sheet And Other Connected Works Of Br Em In Bldg No T31 And T28 At Danapur Under Ge Danapur Cantt, Danapur-Bihar

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us