|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 2 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar. |
| 3 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided. |
| 4 | M&L for cement concreteType B, 1:2:4( M15), 12.5mm graded aggregate. |
| 5 | M&L Brushing neat cement slurry with 3.0kg of cement per sq. metre®and Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes (1:4). |
| 6 | M & L for Machine cut kota stone slab flooring 40-50mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 7 | M & L for Marble work (table rubbed and polished) for wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointin with white cement (1:2) using marble dust with admixture of pigment to match with shade of following types (a) Makrana White |
| 8 | S&F Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(Make: Kajaria, Johnson, Nitco) |
| 9 | S&F Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.20mm |
| 10 | M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (coloured tiles).(Make: Kajaria, Johnson, Nitco) |
| 11 | M&L for dismantling brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 12 | M & L for rough excavation not exceeding 1.5 m deep and getting out in soft soil. |
| 13 | M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.(in soft loose soil) |
| 14 | M&L for hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15cm thick with broken bricks, watered and rammed to a true surface. |
| 15 | Removing cement mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish. |
| 16 | M&L for Brick work with sub class \"B\" bricks,straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 (Except Bricks) at any height with proper scaffolding and safety. |
| 17 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortar.ratio 1:6. |
| 18 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough surface. |
| 19 | M/L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat Rough finished surface of concrete. (Fair finished surface) |
| 20 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 21 | M&L for R.C.C (nominal mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (Type B0 1:2:4 12.5mm graded aggregate). |
| 22 | M&L for Reinforced cement concrete (design mix)in:- Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete (M 20, 20mm graded aggregate). |
| 23 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 24 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 25 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 26 | M & L for taking down Chowkhats or framesexc. 1.5 sq. m each but n. Exc 4 sqmwith shutters without taking off shutters from the framesand remove to store. |
| 27 | S&FPressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame-105 x 60mm |
| 28 | S&FPressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame-125 x 60mm |
| 29 | S/F of Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board withcommercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated. 35mm thick factory made shutter. |
| 30 | M&L for 35.0mm thick Ist class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats® |
| 31 | M&L forProviding and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Make Fenesta, AIS, Prominance, Aluplast. |
| 32 | S&F 4.8mm thick Sheet glass, ordinary quality, glazing with oil putty in square exc 0.5 sq. m in each pane sheet Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side |
| 33 | M&L for taking down the Shutters of any descriptionexc 1 sq. m but n. exc 2sqm each and remove to store. |
| 34 | S&F Brass handles, cast type, polished bright size 150 mm. |
| 35 | S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.300mm size. |
| 36 | S&F Mortice lock, vertical type, size 100 mm brass 2 levers. |
| 37 | S&F size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed250 mm. |
| 38 | S & F of Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ® |
| 39 | M&L for Preparation of new woodsurface over 10 cm width or girthand applyone coat of pink primer and two coat of synthetic enamel paint. |
| 40 | S/F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor size 140 mm. |
| 41 | S/F 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 42 | S&F Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminium bodu (Die cast) |
| 43 | M&L for Preparation of newsurface of any descriptionin over 10 cm in width or girth not otherwise described and applyone coat of red oxide zinc chrome primer and two coat of synthetic enamel paint. Shade will be decided by EIC.(steel surface). |
| 44 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Powder Coating (minimum thickness of powder coating 50 micron) |
| 45 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. withpowder coating of any colour (Thickness or powder coating not less than 50 micron). |
| 46 | Supply & Fixing of powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 47 | S&F 4.8mm thick Sheet glass, ordinary quality, glazing with oil putty in square exc 0.5 sq. m in each pane sheet |
| 48 | S&F Prelaminated particle board, interior grade, prelaminated with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work®both sides with decorative choice laminations12 mm |
| 49 | S&F size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed250 mm. |
| 50 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 51 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profileswith wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludescost of glass and includes all other connected accessories. Net Opening will be measured lorpayment purpose.) (A) Area exceeding 2.00 sqm each Make Fenesta, AIS, Prominance, Aluplast. |
| 52 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes.conforming to I. S.1161- 1979 grade St.-240 |
| 53 | Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3. |
| 54 | S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.(make: TATA, Bhusan, Jindal) |
| 55 | Dismantling boarding, any description, fixed in any position with nails. |
| 56 | Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets(Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shallbe fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. |
| 57 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600g/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessarytainless steel screws, all complete as per direction of Engineer-in-charge. |
| 58 | Providing and fixing concealed hinge of approved quality for 19-20 mm thick door with stainless steel screws complete |
| 59 | Providing and fixingBall catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed. |
| 60 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 61 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces1:6 cement plaster and rendering is to be finished even and smooth (without using extra lime or cement)® |
| 62 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, mitre cut at two corner and jointed with 2 nos. of 150 mm long brackets of 15 x 15 mm M.S. square tube of 19 gauges. The two vertical member to be reinforced with 19 x19 mm squre tube of 19 guage with suitable wooden batten inserted in the verticle MS tube for further enhance screw holding capacity. reinforced with M.S. Square tube, suppling & fixing in opening |
| 63 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site. |
| 64 | S&F M.S. 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed |
| 65 | S & F of 100.0mm Aluminium anodised, barrel tower bolts of extruded section and fixed. |
| 66 | S & F 100.0mm ofAluminium handles, cast type, anodised |
| 67 | M&L for 3mm thick wall care putty on wall (Make: asian, JK,Birla) |
| 68 | M&L for preparing the new surfaces, apply plasticemulsion two coat Surfaces of any description over 10cm girth or width, not otherwise described (Asian paints/ Nerolac, Berger) as approved by EIC in exterior grades. |
| 69 | M&L for Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dashasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 70 | Removing building materials etc. to a distance of 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination.(0.62 cum =One load) |
| 71 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 mm dia |
| 72 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20 mm dia |
| 73 | S&F GI tube 15 mm diaTubes, \"medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. (make: jindal, Tata, Bhusan) |
| 74 | S&F GI tube 20 mm diaTubes, \"medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors (make: jindal, Tata, Bhusan) |
| 75 | S&F Vitreous China wash down water closet pan (pedestal pattern), complete white (excluding fixing bolts, flushing cistern and flush pipe) fixing in repair with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Seat and cover for pedestal pan (Make: Essco,kohler,Grohe) |
| 76 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedfancy type, chromium plated15 mm bore dia.(Make: Essco,kohler, Grohe) |
| 77 | S & F OF 10 lit. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. and connections to pipes and fixing of chain and pull, or lever, if any. (Make: Essco,kohler, Grohe) |
| 78 | S&F Tubular towel rail 20mm dia brass chromium plated. |
| 79 | S&F for brackets of brass chromium platedfix in tubular towel rail 20mm dia |
| 80 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 81 | S&F 15 mm bore dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated fancy type.(Make: Essco,kohler,Grohe) |
| 82 | S/F of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding water closet (squatt pattern) complete and making good to floor fixed in repair.(make: essco, hindware, parryware) |
| 83 | S &FFlush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level fixing in repair. Flush pipes to pedestal pan, including all joints |
| 84 | S&F of Waste coupling of PTMT (half or full threaded, Dia 32 mm (Minimum weight 45gms), suitable for washbasin. |
| 85 | S & F of Vitreous China wash basin, white, flat back, size 550x400mm excluding ditto but including brackets, Wash basins, Fixing of Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, fixed in repair.(make: jaquar, kohler, grohe) |
| 86 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail ® |
| 87 | S&F Self-closing taps, cast copper alloy,chro-mium plated, screwed for iron pipe and fixed fixed in repair.(make: essco, kohler, grohe) 15MM SIZE. |
| 88 | S&F Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) bore dia of discharge pipe 32 mm |
| 89 | S&F Brass chromium plated shower rose 125mm sizewith or without swivel joints, including fixing to steel pipe or union. (make: essco, kohler, grohe) |
| 90 | S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws andwooden/plastic cleats. (Minimum weight 105gms) |
| 91 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors(110mm) |
| 92 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors (75mm) |
| 93 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement ®(75mm) |
| 94 | S/F of PVC (SWR) \"P’ trap, size 110/110 mm. (make: supreme, prince, Kisan) |
| 95 | S/F of PVC(SWR)bends of any radius of size 75.0mm |
| 96 | S/F of PVC(SWR) bends of any radius of size 110 mm |
| 97 | S/F of PVC(SWR) Tee equal or unequal of size 75.0mm |
| 98 | S/F of PVC(SWR) Tee equal or unequal of size 110 mm |
| 99 | S/F of PVC (SWR) vent cowl, size 75 mm |
| 100 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 101 | M&L for painting with aluminium paint of approved brand and manufacture to give an even shade two or more coats on new work. |
| 102 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).Overhead informatory road signage |
| 103 | S & F chrome plated gun hand shower (Health faucet) with 8-10 mm dia 1.2-1.5 meter long flexible tube and wall hook complete complete with desireable colour finsh Make: Jaquar,Kohlar, grohe |
| 104 | S &F SS Toilet paper holder fixed to walls with chromium plated (CP) brass screws. |
| 105 | S&F S.S Soap dish, any type, fixed to plugs with chromium plated brass screws |
| 106 | M&L for pvc flexible waste pipe minimum length 80 cm with inner thread adapter. |
| 107 | S&F of Hand dryer with automatic sensor start (touch free) power minimum 1800 w and support 200-240 v, wind temerature 55 c +/- 10 c induction distance 50mm-120 mm. |
| 108 | S&F Urinal partition of figured/frosted toghned figured glass size 900X450 mmandmin 8 mm thick with brass chrome plated fittings for fixing of glass.(Make: jaquar, kohler, grohe) |
| 109 | S&F Vitreous China urinals, bowl type (flat back or corner wall type), complete including inbuilt spreader, waste and trap providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including Auto closing urinal flushvalve with wall flanges for flushing (cocealed type) grating and Union for discharge pipe with urinal spreader fixied in supply pipe and waste coupling minimum weight 50gms (Exclusive of fixing supply pipe to flushing cistern) fixed in repair.(Make; Jaquar, Kohler, grohe) mimimum size 385x325x635. |
| 110 | S&Fbevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercialplywood and fixed to wooden plugs with chromium plated brass screws and cup washers in required / custimize sizes. |
| 111 | S&F of fancy light for wash basin mirror minimum 08 watts, compatible 200-240v. |
| 112 | S & F of High density polyethylene (HDPE) pipe 50mm in floor, wall and celing with clamps and nesessary fittings like Tee, elbow, socket etc complete. |
| 113 | Providing fabricating and installation of Aluminium Composite Panel (ACP cladding in pan shape in metallic colour of approved shades, made out of 4 mm thick aluminium composite panel consisting of 3mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.5mm thick). The aluminium panel cladding sheet shall be coil coated. The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face #1 and polymer (services) coating on face#2 as specified using stainless steelscrews, nuts, bolts, washers, cleats, weather silicon sealant, backer rods etc. as per directions of Engineer - in - Charge) ( cost of aluminium snap snap beading shall be paid separately), (Make Alexia Panels/ Aludecor/ Alstone/ Viva/ Reynobond India). |
| 114 | M&L for fixing stain less steel letters or figures (Block, Roman, Italic or Indian) n exc. 20 cm high, thickness 25mm. |
| 115 | M&L for fixing stain less steel letters or figures (Block, Roman, Italic or Indian) n exc. 15 cm high, thickness 25mm |
