Name of Tender: Repair and Maintenance of Livestock Shed at ICAR-RCER.
Sl. No.
Item Description
1
Sub Heading 1
2
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12x4x12 =576sft 53.53sqm 54sqm
3
Brick work with common burnt clay modular bricks of class designation 7.5 in superstructure: Cement mortar 1:6 (1 cement : 6 coarse sand) (21x2x6”x7’6”x7’6”x2=337.5 sf t x10”=280.12cft=7.94cum
4
12mm cement plaster of mix.1:6 (1 cement: 6fine sand)337,5x2=675sft 62.73.>63sqm
5
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²85ft.25.90=26mt
6
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate65sqm
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
