|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m,as directed by Engineer-in-charge. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm indepth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete . |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form forWalls (anythickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform. |
| 9 | Steel reinforcement for R.C.C.work including straightening, cutting, bending,placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 10 | Structural steel work riveted, bolted or welded in builtup sections, trusses and framed work, including cutting,. Hoisting etc. complete. |
| 11 | Providing and laying vitrified floor tiles in different sizes (thicknesstobespecified bythemanufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4 (1cement:4coarsesand),jointing with grey cements lurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 600x600 mm. |
| 12 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard,jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement Sqm |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 14 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 15 | Finishing walls with Deluxe Multi surface paint system for interiror and exteriors using primer as permanufacture, specification : Two or more coats applied on walls @ 1.25 ltr/10sqm over including one coat of special primer applied @0.75ltr/10sqm. |
| 16 | Providing and fixing rectangular shape mirror of superior glass of approved make/best quality with edges round off 6mm thick necessary screws fittings etc all complete. |
| 17 | Providing and fixing toilet paper holder : C.P.brass. |
| 18 | Providing and fixing floor mounted, white viterous china single piece, double traps syphonic water closet or approved brand/make, shape, size and pattern including integrated white viterious china cistern of capacity 10 litres with dual flushing system,including all fitting and fixtures with seat cover, cisten fittings, nuts, bolts and gasket etc including making connection with the wxisting P/S trap, complete in all respect as per directions of Engineer in Charges. |
| 19 | Providing and fixing wash basin with C.I.brackets, 15mm C.P .brasspillartaps,32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous ChinaWash basin size 550x400mm with a pair of 15mmC.P. brass pillar taps. |
| 20 | Providing and fixing Towel rail C.P . Brass 600x20mm together with a pair of C.P, brass brackets to fit the size of Towel rail. |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A, including jointing with seal ring conforming to IS :5382, leaving 10mm gap for thermal expansion,(i)single socketed pipes. 75 mm diametre. |
| 22 | Providing and fixingC.P.brass angle valve for basin mixer and geyser points of approvedquality conforming to IS:8931-15 mm nominal bore . |
| 23 | Providing and fixing C.P. Brass extension nipple (size15mmx50mm) of approvedmakeand quality as per direction of Engineer-in-charge. |
| 24 | Providing and fixing CP Brass 32mm size Bottle Trap of approvedquality &make and as per the direction of Engineer-in-charge. |
| 25 | Providing and fixing 3 layerPPR (Polypropylene Random copolymer) pipesSDR 7.4 U V stabilized & anti microbial fusion welded, having thermal stabilityforhot &coldwater supply including all PP-Rplain & bras threaded polypropylene random fittings i/c fixing the pipe with clamp sat 1.00 mspacing.This includes thecost of cutting chases and making goodthe same including testingof joints complete as per direction of Engineer in Chajge. (Concealed work including cuttingchases and making good the walls etc.,PN-16 Pipe, 20 mm OD (SDR-7.4) . |
| 26 | Providing and fixing ball valve (brass) of approved quality complete : Highorlow pressure with plastic floats: 15 mm nominal bore. |
| 27 | Providing and fixing ball valve (brass) of approved quality complete : Highorlow pressure with plastic floats:20mm nominal bore. |
| 28 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 29 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore each |
| 30 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement :6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 31 | Providing andfixing inposition precast R.C.C. manhole cover and frame of required shape and approved qualityRectangular shape 600x450mm internal dimensions |
| 32 | Providing and fixing stainless steel (Grade304) railing made of Hollow tubes, channels, plates etc., |
| 33 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading toapproved municipal dumping ground or as approved by Engineer charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 34 | Providing Wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia & length(holdfast lugs or dash fastener shall be paid for separately). First class Kail wood. |
| 35 | Providing and fixing ISI marked flush door shutters conforming to IS:2202(PartI) decorative type, core of block boardc onstruction with frame of 1st class hardwood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 36 | Oxidised mild steel sliding door bolt 250x16 mm |
| 37 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm |
| 38 | Providing and fixing bright finished brass tower bolts(barrel type) with necessary screws etc. complete : 250x10 mm |
| 39 | Providing and fixing bright finished brass tower bolts(barrel type)with necessary screws etc. complete : 150x10 mm |
| 40 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 41 | Providing and fixing aluminium extruded section brand logo with ISi, IS:3564, embossed on the body, door weight upto 36 kg to 80 kg and door body tubular type universal hydraulic door closer width from 701 mm to 1000 mm),with double speed adjustment with necessary accessories and screws etc. complete. |
| 42 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Group - A) |
| 43 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Group - B) |
| 44 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire) |
| 45 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (25 mm) |
| 46 | Supplying and fixing suitable size G.I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 47 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double Door |
| 48 | Supplying and fixing 5A to 32 A rating, 240 V/415V, 10 KA, \"C\" Curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning as required. (Single Pole) |
| 49 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required. (63 A) |
| 50 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq.mm and upto 95 sq. mm (clamped with 25 X 3 mm MS flat clamp) |
| 51 | Supply and installation of 15 Watt LED surface ceiling lights, round shape, 6 inch diameter, cool white, 6500 K |
| 52 | Supply, installation, testing & commissioning of LT distribution panel, made of GI,powder coated, IP-55 grade, with 1 no 400 A Rating, 3 Phase & Neutral Aluminium Bus Bar and 1 no 100 A MCCB, Ammeter, Voltmeter, indicator lamps installed. |
| 53 | Supply of 50 sq.mm, 2 Core, Armoured Aluminium Power Cable, XLPE/PVC insulated, voltage grade 1100 V. |
