|
| 1 | Earth Work |
| 2 | Earthworkinexcavationinallkindsofsoil(excludingsoilcontaining50%ormoreofshingleorsmallsizebouldersupto30cmsize,saturatedsoilandrock)includingbankingin20cmlayersandbreakingclods,ramminganddressingupforthepurposeofmakingembankmentsorfillingupgrounddepressions,leadupto50mandliftupto1.50m. |
| 3 | Earthworkinexcavationinfoundationandtrenchesinsoilscontaining50%ormoreofshingleorsmallsizebouldersupto30cmsize,liftupto1.50mandstackingtheexcavatedsoilnotmorethan3mclearfromtheedgeoftheexcavationandreturningthestackedsoilin15cmlayerswhenrequired,intoplinth,sidesoffoundationetcconsolidatingeachdepositedlayerbyrammingandwateringandthendisposingofallsurplusexcavatedsoilasdirectedwithinaleadof50m. |
| 4 | Re-fillingexcavatedearthinfoundationsandplinthetc.in15cmlayerincludingrammingandwateringetc.complete. |
| 5 | Fillinginplinthwithsandunderfloorsincludingwatering,ramming,consolidatinganddressingcomplete. |
| 6 | Earth Work |
| 7 | Providingandlayingcementconcrete1:3:6(1cement:3coarsesand:6gradedstoneaggregate20mmnominalsize)excludingthecostofcentringandshutteringin:Foundationsandplinth. |
| 8 | Providingandlayingdampproofcourse38mmthickwithcementconcrete1:2:4(1cement:2coarsesand:4stoneaggregate12.5mmnominalsize). |
| 9 | Extraforprovidingandmixingwaterproofingmaterialincementconcreteworkintheproportionrecommendedbymanufacturers. |
| 10 | Applyingacoatofhotbitumen(mashphalte80/100orequivalent)using1.70KgperSq.m.ondampproofcourseaftercleaningthesurfacewithbrushesandfinallywithapieceofclothlightlysoakedinkeroseneoil. |
| 11 | R.C.CWork |
| 12 | Reinforced concrete workinfoundations,footings,basesofcolumnsetc.andmassconcreteexcludingcostofcentring,shutteringandreinforcementin:.M20(1cement:1.5coarsesand:3stoneaggregate20mmnominalsize). |
| 13 | Reinforcementcementconcreteworkincolumns,pillars,piers,abutments,postandstrutsetcuptofloortwolevelincludingfinishingandplasteringtheexposedsurfacewithcementmortar1:3(1cement:3finesand)ofthicknessnotexceeding6mmtogiveasmoothandevensurfacebutexludingcostofcentring,shutteringandreinforcement..M20(1cement:1.5coarsesand:3stoneaggregate20mmnominalsize). |
| 14 | Reinforcedcementconcreteworkinlintels,beamsandbresumersuptofloortwolevelincludingfinishingandplasteringtheexposedsurfacewithcementmortar1:3(1cement:3finesand)ofthicknessnotexceeding6mmtogiveasmoothandevensurfacebutexcludingcostofcentering,shutteringandreinforcement.M20(1cement:1.5coarsesand:3stoneaggregate20mmnominalsize). |
| 15 | Reinforcedcementconcreteinsuspendedfloors,roofs,landingsandbalconiesuptofloortwolevelincludingfinishingandplasteringtheexposedsurfacewithcementmortar1:3(1cement:3finesand)ofthicknessnotexceeding6mmtogiveasmoothandevensurfacebutexcludingcostofcentringandshutteringandreinforcementwithM20(1cement:1.5coarsesand:3stoneaggregate20mmnominalsize). |
| 16 | Reinforcedcementconcreteworkinstaircases(excludinglanding)exceptspiralcasesincludingfinishingandplasteringtheexposedsurfacewithcementmortar1:3(1cement:3finesand)ofthicknessnotexceeding6mmtogiveasmoothandevensurface,preparingofthetopsurfaceandfinishing,nosinguptofloortwolevelbutexcludingthecostofcentring,shutteringandreinforcementwithM20(1cement:1.5coarsesand:3stoneaggregate20mmnominalsize). |
| 17 | Reinforcedcementconcreteworkinverticalandhorizontalfinsindividuallyorformingboxlouversbandsandfaciasuptofloortwolevelincludingfinishingandplasteringtheexposedsurfacewithcementmortar1:3(1cement:3finesand)ofthicknessnotexceedingthe6mmtogiveasmoothandevensurfacebutexcludingthecostofcentering,shutteringandreinforcementwith1:2:4(1cement:2finesand:4stoneaggregate12.5mmnominalsize). |
| 18 | Reinforcement of R C Cwork including bending, binding and placing in position complete, b) Tar/ TMT steel |
| 19 | Centringandshutteringincludingstrutting,proppingetcandremovalofformworkfor: Foundation, footings, basesofcolumnsetc. andmassconcrete. |
| 20 | Centringandshutteringincludingstrutting,proppingetcandremovalofformworkfor: Column,pillars,postsandstrutsetc. |
| 21 | Centringandshutteringincludingstrutting,proppingetcandremovalofformworkfor: Lintels,beams,girders,bressumersandcantileversetc. |
| 22 | Centringandshutteringincludingstrutting,proppingetcandremovalofformworkfor: Suspendedfloors,roofs,landingsshelvesandtheirsupports,balconiesandchajjas(3.5mheight). |
| 23 | Centringandshutteringincludingstrutting,proppingetcandremovalofformworkfor: Stairs (excludinglandings)exceptspiralstaircases. |
| 24 | Centringandshutteringincludingstrutting,proppingetcandremovalofformworkfor: Verticalandhorizontalfinsindividuallyorformingboxlouversbandsandfacias. |
| 25 | Brickwork |
| 26 | Brickworkwithbestavailablelocalbricksinfoundationsandplinthincementmortar1:5(1cement:5finesand). |
| 27 | Extraforbrickworkwithbestavailablelocalbricksinsuperstructureaboveplinthleveluptofloortwolevel. |
| 28 | Halfbrickmasonry(withbestavailablelocalbricks)incementmortar1:4(1cement:4coarsesand)infoundationandplinth. |
| 29 | Extraforhalfbrickmasonryinsuperstructureaboveplinthlevelanduptofloortwolevel. |
| 30 | R.C.CWork |
| 31 | Door/Window/VentilatorFrames:-ProvidingandFixingfactorymadePVCdoorframemadeofPVCextrudedsectionsofsize75mmx53mm,havingwallthickness2.0mm(±0.2mm).BothverticalssidesoftheframereinforcedwithPVCprofileofcrosssectionsize28mmx30mmx2mmthickness(±0.2mm)and75mmx200mmlong,includingreinforcingbothendsofthetopframewithPVCprofile.PVCDoorFrameandPVCreinforcementprofiletobemitredcut,jointedandfusionweldedtogether,includingprovidingandfixing3nosof125mmlongstainlesssteelhingestoframe,fixingtheframewithjambwithrequirednos&sizesofanchordashfastener,allcompleteaspermanufacturer\"sspecificationanddirectionofengineer-in-charge. |
| 32 | Entry/ExitDoorShutters:-Providingandfixing37mmthickfactorymadePVCDoorshutter,stylesandrailsmadeofPVChollowextrudedprintedandlaminatedsectionhavingoveralldimension115mmx37mmwithwallthickness2mm(±0.2mm)withinbuiltbeadingononeside,thestylesandrailsmitredcutandjointatcornersbyinserting2nosPVCprofilereinforcementofsize75mmx200mmlongwithcrosssectionsizeof28mmx30mmhavingwallthickness2mm(±0.2mm).Styles,railsandreinforcementstobefusionweldedtogether.OnlyhingesideverticalstyletobeeinforcedwithPVCprofilereinforcementinfulllength.PrintedandlaminatedPVClockrailofsize110mmx37mmhavingwallthickness2mm(±0.2mm)tobeweldedhorizontallywiththeverticalstylesafterinsertingPVCprofilereinforcementasinstylesandrails,providingwithPVCsnapfitbeading,panelsof100x20mmprinted&laminatedandinserting2nos6mmdiabrightsteelrodhorizontallywithbothsidethreadedandtightenedwithchecknutsandwasherscomplete,allaspermanufacturer\"sspecificationanddirectionofengineer-in-charge. |
| 33 | PVCDoorFrames:-ProvidingandfixingPVCDoorFrameofsize50x47mmwithawallthicknessof5mm(±0.2mm),madeoutofsinglepieceextrudedPVCprofile,withmitredcutjointsandjointwith2nosofPVCbracketofsize190mmx100mmlongarmsofcrosssectionsize35x15mm&selfdrivenselftapingscrews,theverticaldoorprofilestobereinforcedwith40x20mmM.S.rectangulartubeof0.8mm,includingprovidingEPDMrubbergasketweathersealthroughouttheframe,includingjointing5mmPVCframestripwithPVCsolventcementonthebackoftheprofile.Thedoorframetobefixedtothewallusing8x100mmlonganchorfastenerscomplete,allaspermanufacturer\"sspecificationanddirectionofEngineer-in-charge. |
| 34 | Entry/ExitDoorShutters:-Providingandfixing37mmthickfactorymadePVCDoorshutter,stylesandrailsmadeofPVChollowextrudedprintedandlaminatedsectionhavingoveralldimension115mmx37mmwithwallthickness2mm(±0.2mm)withinbuiltbeadingononeside,thestylesandrailsmitredcutandjointatcornersbyinserting2nosPVCprofilereinforcementofsize75mmx200mmlongwithcrosssectionsizeof28mmx30mmhavingwallthickness2mm(±0.2mm).Styles,railsand reinforcementstobefusionweldedtogether.OnlyhingesideverticalstyletobeeinforcedwithPVCprofilereinforcementinfulllength.PrintedandlaminatedPVClockrailofsize110mmx37mmhavingwallthickness2mm(±0.2mm)tobeweldedhorizontallywiththeverticalstylesafterinsertingPVCprofilereinforcementasinstylesandrails,providingwithPVCsnapfitbeading,panelsof100x20mmprinted&laminatedandinserting2nos6mmdiabrightsteelrodhorizontallywithbothsidhreadedandtightenedwithchecknutsandwasherscomplete,allaspermanufacturer\"sspecificationanddirectionofengineer-in-charge. |
| 35 | ProvidingandfixingMSgrillsofrequiredpatterninwoodenframesofwindowsetcwithMSflat,squareorroundbarswithroundheadedboltsandnutsorbyscrews. a) Ornamentalgrill |
| 36 | Providingandfixing40x3mmflatironholdfasts40cmlongincludingfixingtoframewith10mmdiabolts,nutsandwoodenplugsandembeddingincementconcreteblock30x10x15cmin1:3:6(1cement:3sand:6hardstonechips40mmnominalsize). |
| 37 | Providingandfixingaluminumslidingdoorboltsanodisedtransparentordyedtorequiredcolororshadewithnutsandscrewsetccomplete. a) 300x16mm |
| 38 | ProvidingandfixingaluminumTowerboltsanodizedortransparentordyedtorequiredcolororshadewithnecessaryscrewsetccomplete. a) 300x10mm |
| 39 | ProvidingandfixingaluminumHandlesanodisedtransparentordyedtorequiredcolororshadewithnecessaryscrewsetccomplete. a) 125mm |
| 40 | SteelWork |
| 41 | Providingandfixinginpositioncollapsiblesteelshutterswithverticalchannels20mmx10mmx2mmandbracedwithflatirondiagonals20mmx5mmsizewithtopandbottomrailsofTiron40mmx40mmx6mmwith38mmdiasteelpulleyscompletewithbolts,nuts,lockingarrangements,stoppers,handlesincludingapplyingaprimingcoatofredleadpaint. |
| 42 | Providingandfixingstainlesssteel(Grade304)railingmadeofHollowtubes,channels,platesetc.,includingwelding,grinding,buffing,polishingandmakingcurvature(whereverrequired)andfittingthesamewithnecessarystainlesssteelnutsandboltscomplete,i/cfixingtherailingwithnecessaryaccessories&stainlesssteeldashfasteners,stainlesssteelboltsetc.,ofrequiredsize,onthetopofthefloororthesideofwaistslabwithsuitablearrangementasperapprovalofEngineer-in-charge, |
| 43 | ProvidingandfixingMSfanclamptypeIof16mmdiaMSbarbenttoshapewithhookedendsinRCCslabsduringlyingincludingpaintingtheexposedportionofloopallasperstandarddesigncomplete. |
| 44 | R.C.CWork |
| 45 | Providingandlayingvitrifiedfloortilesindifferentsizes(thicknesstobespecifiedbythemanufacturer)withwaterabsorptionlessthan0.08%andconformingtoIS:15622,ofapprovedmake,inallcoloursandshades,laidon20mmthickcementmortar1:4(1cement:4coarsesand),includinggroutingthejointswithwhitecementandmatchingpigmentsetc.,complete b) SizeofTile600x600mm |
| 46 | ProvidingandlayingVitrifiedtilesindifferentsizes(thicknesstobespecifiedbymanufacturer),withwaterabsorptionlessthan0.08%andconformingtoI.S.15622,ofapprovedmake,inallcolours&shade,inskirting,riserofsteps,over12mmthickbedofcementmortar1:3(1cement:3coarsesand),includinggroutingthejointwithwhitecement&matchingpigmentsetc. complete. b) SizeofTile600x600mm |
| 47 | Whiteglazedtiles5mm.thickinflooring,skirting,risersofstepanddadoin12mmthickcementplaster1:3(1cement:3coarsesand)paintedwithwhitecementslurry. |
| 48 | Marblestoneflooringwith18mmthickmarblestone,aspersampleofmarbleapprovedbyEngineer-in-charge,over20mm(average)thickbaseofcementmortar1:4(1cement:4coarsesand)laidandjointedwithgreycementslurry,includingrubbingandpolishingcompletewith: Makranawhitesecondquality |
| 49 | Extraforprefinishednosingtotreadsofstepsofmarblestone. |
| 50 | Chequeredterrazzotiles22mmthickwithmarblechipsofsizesupto6mminfloorson25mmthickbedmortar1:3(1cement:3coarsesand)jointedwithneatcementslurrymixedwithpigmenttomatchtheshadeofthetilesincludingrubbingandpolishingcomplete: a) Light shades using white cement. |
| 51 | Cementplasterskirting(upto30cmheight)withcementmortar1:3(1cement:3coarsesand)finishedwithafloatingcoatofneatcement,includingroundingofjunctionswithfloor.a) 21mmthick. |
| 52 | RoofingWork |
| 53 | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand). a) 100 mm diameter pipe |
| 54 | Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc. a) 100 mm diameter pipe |
| 55 | Finishing work |
| 56 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand) . |
| 57 | 15 mm cement plaster 1 : 5 (1 cement : 5 fine sand) on the rough side of single or half brick wall. |
| 58 | 6 mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand). |
| 59 | Providing and applying plaster of paris putty of 2 mm thickness over plasteredsurface to prepare the surface even and smooth complete. |
| 60 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 61 | Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 62 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 63 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade |
| 64 | Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work. |
| 65 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 66 | Miscellaneous Work |
| 67 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 68 | Brick edging 7.50 cm wide and 12.50 cm deep to plinth protection with 2nd class bricks including grouting with cement mortar 1 : 4 (1 cement : 4 fine sand). |
| 69 | Supplying & Fixing of Steel gate |
| 70 | DrainageWork |
| 71 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 72 | Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 100 mm dia SW pipes |
| 73 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes |
| 74 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 75 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honey comb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 76 | Water Supply Work |
| 77 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. a) 15 mm nominal bore |
| 78 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. b) 20 mm nominal bore |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External worka) 25 mm nominal bore |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External workb) 32 mm nominal bore |
| 81 | Providing and fixing brass bib cock of approved quality. a) 15 mm nominal bore |
| 82 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. a) 15 mm nominal bore. |
| 83 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15 mm nominal bore |
| 84 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. a) 15 mm nominal bore |
| 85 | Providing and fixing CPVC Pipes, having Thermal Stability for hot and Cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge full way valve with wheel of approved quality. a) 50mm nominal outer dia pipe |
| 86 | Providing and fixing CPVC Pipes, having Thermal Stability for hot and Cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge full way valve with wheel of approved quality. a) 50mm nominal outer dia pipe b) 75mm nominal outer dia pipe |
| 87 | Providing and fixing PVC connection pipe with brass union. a) 45 cm length 15 mm nominal bore. |
| 88 | Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet. a) 150 mm dia |
| 89 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 90 | Sanitary Installation Work |
| 91 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. b) Orissa Pattern WC Pan. |
| 92 | Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required. b) WC pan with white plastic seat and lid. |
| 93 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. b) Flat back wash basin size 550x400mm with a pair of 15 mm CP brass pillar taps of heavy quality |
| 94 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : b )Kitchen sink with drain board , 510x1040 mm bowl depth 250 mm. |
| 95 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required. b )One urinal basin with 5 Litres CI automatic flushing cistern |
| 96 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 97 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleats with CP brass screws. |
| 98 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). 750 x 20 mm size |
| 99 | Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.a) 100 x 100 x 100 mm |
| 100 | Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.b) 80 x 80 x 80 mm |
| 101 | Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. a) 100 mm inlet and 100 mm outlet |
| 102 | Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. b) 100 mm inlet and 75 mm outlet |
| 103 | Providing and fixing CP brass waste for wash basins and sinks. a) 40 mm dia |
| 104 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. a) 100 mm dia SW pipes |
| 105 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. b) 75 mm dia SW pipes |
| 106 | Providing and fixing sand cast iron heel rest sanitary bend. a) 100 mm dia |
| 107 | Providing and fixing sand cast iron heel rest sanitary bend. b) 75 mm dia |
| 108 | Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap . |
| 109 | Painting two or more coats on rain water, soil waste and vent pipes and fittings with black anti-corrosive bituminoustic paint of approve brand and manufacture over a priming coat of ready mixed genuine red lead on new work. a) 100 mm dia |
| 110 | ALUMINIUM /PVC & uPVC Work |
| 111 | Window / Ventilator Shutters:- Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) a) Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm). |
| 112 | Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : a) With float glass panes of 4.0 mm thickness. |
| 113 | Carriage of materials |
| 114 | Wet Riser System and Sprinkler system and Automatic fire Alarm system |
| 115 | Electrical Installatyion ( Both External and Internal Services connection) |
