Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil |
| 3 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 5 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: |
| 6 | Random rubble masonry with hard stone laid dry in foundation, plinth & walls Laid with bond stone. |
| 7 | Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=101 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC coated, Mesh wire diametre 2.7/3.7mm (ID/OD),mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per metre of mesh perpendicular to twist, tying with lacing wire of diametre 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 201 mm, as per drawing, all complete as per directions of Engineer-in-charge. |
| 8 | Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :One face dressedRed sand stone. |
| 9 | Providing and laying in position rammed earth in walls (Upto floor One level ) Providing and laying in position stabilized rammed earth with 8% cement in walls using mixture of selected earth and clay of gradation as directed by engineer in charge mechanically mixed, placed in position compacted by vibration including form work up to floor one level. |
| 10 | Dry stone pitching (any thickness) excluding cost of stones. On Horizontal |
| 11 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 12 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 13 | Providing and laying in position cement concrete1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 14 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 15 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1cement : 1.5 sand : 3 coarse aggrigae of 20mm nominal size. |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 21 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 22 | Providing and laying 80mm thick cobble stone flooring on 50mm compacted sand bedding complete, including materials, labour, compaction, joint filling and finishing. |
| 23 | Supplying and Laying local stone slabs on flooring or walls of minimum size 300X600X50mm including carriage form source to site including laying stone slabs with cement paste, finishing all including royality/taxes all complete job Local stone procuring (Yamangs) |
| 24 | Supplying and planting of tree saplings such as Willow including excavation of pit of size 0.6 m × 0.6 m × 0.6 m, refilling with good earth and well-decomposed manure in the ratio of 2:1, proper watering, compacting, and leveling, disposal of surplus soil, providing staking support to each plant, and maintenance for a period of thirty days after planting, complete as directed by the Engineer-in-Charge. |
| 25 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. Using M.S. angels 40x40x6 mm for diagonal braces. |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 27 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:3:6 (1 Cement: 3 coarse sand(zone-III) : 6 graded stone aggregate 20 mm nominal size). |
| 28 | Grassing with Harble plant including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). |
| 29 | Supplyingandstackingofgoodearthatsiteincludingroyaltyandcarriageupto1km (earth measured in stacks will be reduced by 20% for payment) |
| 30 | Supplyingandstackingsludgeat site including royalty and carriage upto 1km (sludge measured in stacks will be reduced by 8% for payment), |
| 31 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate. |
| 32 | wall plaster 12 mm cement plaster of mix : 1:4 |
| 33 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 34 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Asian paints/Nerolac paint/Dulux paint (Shade as per instruction of Engineer Incharge) |
| 35 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class Kail wood. |
| 36 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 37 | Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). |
| 38 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete : |
| 39 | Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm). |
| 40 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding polishing and making curvature (where erver required) and fitting the samme with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainlees steel dash fastner stainless steel bolts etc. of required size, on the top of the floor or the size of waste slab with suilble arrangemnt as per approverl of engneer in charge, ( for paymetn purpose only weight of stainless steel memebrers shall be consider excluding fixng accessories such as nuts, bolts, fastner etc. |
| 41 | Structural steel work in build up sections trusses and frame work, including cutting, hoisting, fixing in position and appling a primary coat of approved steel primer all complete |
| 42 | Providing and fixing Deodar wood planking 40mm thick for bridge deck, including seasoning, preservative treatment, cutting to required size, fixing over supporting members with iron screws/bolts, complete as per direction of Engineer-in-Charge. |
| 43 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; |
| 44 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm |
| 45 | French spirit polishing, Two or more coats on new works including a coat of wood filler. |
| 46 | Providing & fixing false ceiling at all heights with PVC ceiling panel false ceiling tiles of ceiling panels of approved make and shade, made from fire-retardant, moisture-resistant PVC, fixed on MS/GI supporting to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams persqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - Tof size 15x32mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steelitems (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mmdia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on peripherywall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wallwood screws. The work shall be carried out as per specifications, drawing and as per directions of theEngineer-in-Charge. |
| 47 | Demolishing stone rubble masonry manually/ by mechanical means including tacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 48 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 49 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 50 | Supply, installation, testing and commissioning of 40W high-performance integrated solar LED street light suitable for outdoor use, operating on 50 Hz system, complete with high-efficiency LED light source, in-built 18Ah rechargeable battery for long backup, solar photovoltaic panel, intelligent charge controller, lightweight corrosion-resistant housing (approx. 1.1 kg), octagonal tapered pole base 130 mm, Top 60 mm, thickness 3 mm with stronger base plate, all accessories and mounting arrangements, complete in all respects, with minimum 5-year manufacturer’s warranty. |
| 51 | Supplying, installation, testing and commissioning of LED bollard luminaire of 7W / 9W, suitable for outdoor pathway and landscape lighting, made of die-cast aluminium housing with corrosion-resistant powder-coated finish, IP65 protection, opal/diffused polycarbonate cover, integrated LED driver, operating on 230V AC supply, complete with mounting accessories, internal wiring, earthing, including all materials, labour and accessories, conforming to relevant IS/IEC standards, as approved by Engineer-in-Charge. |
| 52 | Supply and laying of 90 mm diameter HDPE DWC (Double Wall Corrugated) pipe for underground electrical cable protection, having corrugated outer surface and smooth inner bore, conforming to relevant IS standards, including excavation, laying, jointing with couplers, backfilling, and restoration of surface, complete in all respects. |
| 53 | Providing and fixing benches of which is made up of iron and woodensitting (45\" L X 12\" W X 18\"+18\" H). |
| 54 | Providing and placing trash cans at specific points as per design of 100 ltrs capactiy fiable cleantech wheeled plastic dustbin. |
| 55 | Supplying and fixing of inugaration board made up of marble with writing proper information on the board and fixing as per required complete job. |
| 56 | Carraige of materials for avg lead of 15 Km Distance Mechanical Transportation.Cement. |
| 57 | Steel |
| 58 | Stone |
| 59 | Carraige of materials for avg lead of 0.5 Km Distan head load.Cement |
| 60 | Steel |
| 61 | Stone |
| 62 | Solar Panel of 128KW items:(Providing, Supplying, Installing, Testing & Commissioning):Crystalline Solar PV Modules made in India of 450 Wp nominal rating each, minimum module efficiency 16%, positive power tolerance up to +3%, complying with IEC 61215 / IS 14286, IEC 61730, IEC 61853-1 / IS 16170-1 and IEC 62804 (PID), with IP65/IP67 junction box, RFID tag laminated in the glass and 25-year performance warranty, mounted as per design. |
| 63 | Grid-tied / Hybrid Solar Power Conditioning Unit (Inverter/PCU) of suitable cumulative capacity (approx. 2 x 33 kW) with integrated MPPT, efficiency ≥97%, anti-islanding protection as per IEC 62116 / IS 16169, protection degree IP65 (outdoor), compliance to IEC 61683 / IS 16221 and IEC 60068 for environmental tests, complete with all required protections and indications. |
| 64 | Lithium Iron Phosphate (LiFePO4) Battery Modules of 5 kWh each (or equivalent), with integrated Battery Management System (BMS), suitable for hybrid operation of rooftop solar plant, designed for minimum 6000 cycles at 80% DoD, housed in suitable rack / cabinet with necessary protections and interconnections. |
| 65 | Module Mounting Structure (MMS) fabricated from hot-dip galvanized MS sections as per IS 2062 with galvanization as per IS 4759, designed for wind load as per IS 875 (Part 3), using SS-304 or hot-dip galvanized fasteners, suitable for RCC rooftop installation with specified tilt angle, ground clearance and spacing for access, complete in all respects. |
| 66 | Energy Metering consisting of Net Meter and Generation Meter as per DISCOM / SERC regulations including CTs/PTs where required, meter box, sealing, wiring and testing as per utility norms. |
| 67 | Array Junction Boxes (AJB) for termination of strings, made of GRP/FRP/powder-coated aluminium with IP65 or better protection, equipped with copper busbars, cable lugs, double-compression glands, MC4 or equivalent connectors, hinged door with EPDM gasket and suitable DC rating with required safety factor. |
| 68 | DC Distribution Box (DCDB) for receiving DC output from PV array, dust and vermin proof with minimum IP65 protection, equipped with EC-grade copper busbars, suitably rated MCBs/MCCBs, Type-II DC surge protection device and DC isolators as per design, complete with wiring and terminations. |
| 69 | AC Distribution Box (ACDB) / AC Panel to control AC power from inverters, metal-clad, totally enclosed, cubicle type with IP54 (indoor) / IP65 (outdoor) protection as per site condition, equipped with MCB/MCCB/RCBO, SPDs, busbars, indicating lamps and all accessories conforming to IEC/IS 60947 series. |
| 70 | Protections – Earthing System comprising minimum three separate earth pits (for DC side, AC side and lightning protection) as per IS 3043:2018 using GI / copper-bonded electrodes, earth busbars, interconnecting strips and earth conductors to achieve earth resistance ≤5 ohm, including testing and documentation. |
| 71 | Protections – Lightning Protection System for the rooftop solar array area designed and installed as per IEC 62305 / NFC 17-102, including air terminals, down conductors, test links and separate earthing connected to the plant earth grid. |
| 72 | Protections – Surge Protection Devices (SPDs) of Type-II/MOV for DC and AC sides, connected between positive, negative and earth on DC side and between phases/neutral and earth on AC side as per IEC 61643, including enclosures, wiring and terminations. |
| 73 | DC Cabling using flexible, UV and weather resistant, XLPO insulated solar DC cables of appropriate sizes conforming to IEC 60227/IS 694, IEC 60502/IS 1554 and BIS 17293 for 1500 V DC, with copper multi-strand conductors, laid in RPVC / HDPE conduits or GI trays with proper tagging, ferruling and supports, from modules to AJBs to inverters. |
| 74 | AC Cabling using XLPE insulated, armoured copper/aluminium power cables of suitable size and voltage grade, laid in trays/conduits including terminations, glands, lugs, identification markers and supports from inverters to ACDB / LT panel and interconnections within AC panels. |
| 75 | Conduits, Cable Trays and Accessories including UV-resistant RPVC/HDPE conduits, GI cable trays with covers, thermo-plastic clamps, saddles, junction boxes and all necessary hardware for safe routing and protection of DC and AC cables as per specification. |
| 76 | System Documentation, Drawings and Manuals including array layout, single line diagrams, cable schedules, O&M manuals, manufacturer datasheets, test certificates, warranty documents and handholding / training to consumer as per MNRE technical specification. |
| 77 | Miscellaneous Items including labels, danger boards, name plates, ferrules, nuts & bolts, sealing materials and all minor items not specifically mentioned but required for safe, complete and satisfactory operation of the rooftop solar plant. |
| 78 | Construction of Musium items:Earth work in excavation by mechanical means (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 79 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 80 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: |
| 81 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete |
| 82 | Providing and laying in position cement concrete1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 83 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 84 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 85 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 86 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 87 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases of columns, etc. for mass concrete |
| 88 | Centering and shuttering including strutting, propping etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 89 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 90 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 91 | Providing & fixing upto floor five level compressed earth blocks (CEB) made an appropriate mix of dry inorganic subsoil, non-expansive clay, sand, and aggregate, in mud mortar, including cost of materials complete. |
| 92 | Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge. |
| 93 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : |
| 94 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregateCement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate |
| 95 | Providing and fixing 12mm thick pre laminated flooring of approved brand as per directiopn of engineer incharge, complete job AC-4 including carraige. |
| 96 | Providing and laying 60mm thick faciory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 97 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windowscomprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated)casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plasticcaps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusionwelded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wallshall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes andsilicon sealant shall be paid separately). Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 98 | Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12-7 mm insulated glass (double glazed) vision panel units of size and shape as required and specified,comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade withreflectivesoft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear floatglass 6mm thick, spacer tube 12mm wide, dessicants,including primary seal and secondary seal(structural silicone sealant) etc. all complete for the required performances, as per the Architecturaldrawings, as per the approved shop drawings, as specified and as directed by the Engineer-in- Charge.The IGUs shall be assembled in the factory/ workshop of the glass processor. |
| 99 | Internal wall plaster 12 mm cement plaster of mix : 1:4 |
| 100 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. |
| 101 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 102 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Asian paints/Nerolac paint/Dulux paint (Shade as per instruction of Engineer Incharge) |
| 103 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 104 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 105 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) |
| 106 | Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge(Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters. |
| 107 | Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). |
| 108 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete : |
| 109 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 110 | 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing |
| 111 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with |
| 112 | French spirit polishing, Two or more coats on new works including a coat of wood filler. |
| 113 | Fabrication & fixing of counter cabinete 19 mm pre-laminated plywood with 2.0 mm PVC edge banding, screws, adhesive, wood polishing/painting etc all complete job includes cutting, edge-banding, assembly & installation of necessary handles, hinges etc complete, as per drawing. (Measured as sqm of 19 mm pre-lam MR board used). |
| 114 | Providing and fixing Stainless steel ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40mm includign painting of fittings and brackets, cutting and makng good the walls wereever required:kitchen sink with drain board 17.10.1.1 510x10.40mm bowl depth 250mm 510x1040mm bowl depth 250mm. |
| 115 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 116 | Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. |
| 117 | Providing and fixing 8mm dia C.P /SS jet with flexibel tube upto 1 meter along with S.S. triangular plate to Eurepean type W.C of quality and make as approved by Engineer-in-Charge. |
| 118 | Providing and fixing white vitreous china wash basin with C.I brackets, 15mm C.P brass, pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require whtie vitreous china wash basin size 630x450mm with a pair of 15mm CP brass pillar taps. |
| 119 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, apporved shade, colour and teture laid overe 20mm thick base cement mortar 1:4 (1 cement :4 mortar), joints treaated with white cement, mixed with matching pigmaent, epoxy touch ups, including rubbign, cureing, moulding and polishing to edges to give high gloss finish etc. Complete all levels, Granite of any colour and shade Area of slab over 0.50 sqm |
| 120 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 121 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75MM Dia |
| 122 | 110MM Dia |
| 123 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Chajge. (Concealed work including cutting chases and making good the walls etc.) 20MM Dia |
| 124 | 25MM Dia |
| 125 | 32MM Dia |
| 126 | Providing and fixing of material fot the insulation of pipe with nitrile tube, tapping with cello tape, rockwool 6 inches per side, wire mesh, polythene, tapping with cello tape aluminum sheet 26 guage cladding with dia complete job including carriage. 19mm thick, 50 mm dia (OD) PPR 32 mm |
| 127 | Providing and fixing of material for the insulation of pipe with nitrie, tapping with cello tape for inner wall fittings complete job including carriage 19mm thick, 50 mm dia (OD) PPR 25 mm |
| 128 | Providing and fixing of material for the insulatio of water storage tank of with nitriel sheet, tapping with cello tape, Rock wool 6 inches per side, wire mesh, polythene aluminum sheet 26 guage cladding with dia of, complete job. 19mm thick nitrile seet. |
| 129 | Providing and fixing heat tape, 33 watt on PPR pipes made of reinforced or chromelox or equivalent make, as approved by Engineer in charge, complet job |
| 130 | Providing and fixing brass bib cock of approved quality |
| 131 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore. |
| 132 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore. |
| 133 | Providing and fixing PTMT grating of approved quality and colour. |
| 134 | Providing and fixingss swivelling shower, 15 mm nominal bore, weighing not less than 100gms indluding all necessery items all complte job.. |
| 135 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 136 | Providing and fixing ball valve (brass) of approved quality complete : High or low pressure with plastic floats:20MM Dia |
| 137 | 25MM Dia |
| 138 | Providing and fixing 600x450 mm bevelled edge mirror of superior glss (of approved qualtiy) complete eith 6mm thick hard board ground fixed to wooden clits with cp bass screw and washers complete. |
| 139 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with minimum disstance of 37mm form wall face with conceled fitting arrangment of approved quality and colour weighing not less than 88 grms |
| 140 | Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I.grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 141 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes. |
| 142 | DG Set:Supplying, installation, testing and commissioning of 150 kVA silent type Diesel Generator Set comprising of water-cooled, 4-stroke, turbocharged CPCB Stage-II compliant diesel engine coupled directly to a self-excited, self-regulated, brushless alternator rated 150 kVA, 3-phase, 415 V, 50 Hz, 0.8 power factor (lagging), mounted on a common fabricated steel base frame with anti-vibration mounts, complete with AMF control panel including digital metering (voltmeter, ammeter, frequency meter, power factor meter, kW/kVA meters), protection for overload, short circuit, low oil pressure and high temperature, 12V/24V battery starting system, weatherproof and soundproof acoustic enclosure confirming to CPCB noise level of 75 dB(A) at 1 meter, fuel tank of minimum 8-hour capacity with fuel level indicator, exhaust piping with silencer and insulation, earthing with twin copper plate earth pits as per IS:3043, interconnecting cables, Cement concrete Base and all accessories as required for satisfactory and efficient operation of DG Set, complete in all respects as per IS:10000 and IS:13364/IEC 60034. Of maker Kirloskar Green / Cummins / Mahindra Powerol / Ashok Leyland / (or equivalent approved make). |
| 143 | Internal Electrical Works:SUB-A POINT WIRING , DISTRIBUTION BOARD & SOCKETS:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A |
| 144 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 145 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 146 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 147 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 148 | Supplying and fixing following size/ modules, GI box alongwith modular base and cover plate for modular switches in recess etc, as required4 Module (100x75mm) |
| 149 | 6 Module (200x75mm) |
| 150 | 12 Module (200x150mm) |
| 151 | Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc as reqquired:5/6 A switch |
| 152 | 15/16 A switch |
| 153 | 3 pin 5/6 A socket outlet |
| 154 | 6 15/16 A socket outlet |
| 155 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240V ,on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required (but eithour MCB/RCCB/isolator)8 way, Double Door |
| 156 | Suppling and fixing 5A to 32A rating, 240/415V, 10kA, \"c\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required:Single pole |
| 157 | Double Pole |
| 158 | SUB-B LIGHTS:SITC OF 8 W LED 6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. MAKE :- Havells |
| 159 | Supply installation testing commissioning of TRIM CLIPON LED PANEL SQUARE 24 W LED 6500 K Make:- Havells Model:-LHEAABP7IN1W024 |
| 160 | Supply installation testing commissioning of exhaust fan at window 6\" including cost of wiring, screws,etc all complete job |
| 161 | Information Board Items:Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil @80% |
| 162 | Ordinary rock@20% |
| 163 | Hard rock (Blasting Prohibited) @10% |
| 164 | Providing and laying of stone solling on horizontal level. Incld. c/c stone and carriage complete. Including carriage upto 30km |
| 165 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 166 | Filling of available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 1.5m |
| 167 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level. |
| 168 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five leveMasonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) |
| 169 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diaMetre bolts, nuts and wooden plugs and embedding in cement concrete each block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 170 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with polishing complete. |
| 171 | Proviidng and fixing local tyoe Kaju with post of 4\"x4\" size with carving of local desing complete wood of made up of Budloo wood complete including polishing the wooden surface with two or more coat to make the surface smooth . |
| 172 | Providing hoisting and fixing trusses/ purlins/rafters /posts/post plates or like components of 1st class budloo/fir wood including cost of screws etc complete |
| 173 | Providing and fixng wooden railling of size 4\"x4\" with carving of loal desing on the wood including all necessary fixtures fittings complete job made up of budloo wood ncluding polishing the wooden surface with two or more coat to make the surface smooth . |
| 174 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:. The surface to be polished is rubbed with sand paper 80/120 no. and thenwith sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3.On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillersto fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4to 6 hrs on which again a light wet rubbing is done this surface is further allowedto dry for 12 hrs.On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is urther allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 175 | Providing and laying local dressed stone (Yamas) laid over concrete base in 1:4 mix white cement mortar filling the gap including cost and carriage upto 60km by MT. |
| 176 | Providing and fixing Rect-reflective regulaotry board made up of 2mm thick aluminum sheet face to be fully covered with high intensit encapulated lense type reto reflecto sheeting on one side as approved letters , symbols, borders etc will and QR Containing the information about the specif place . |
| 177 | Providing ridges or hips of width 60cm over all in plain G.S sheet fixed with polymer coated j or L hooks bolts and nuts 8mm dia GI limpet and bitumen compete . |
| 178 | Providing and fixing 1\" width eves board of budloo wood one side panalled 1/1/2\" thick complete |
| 179 | Providing and fixing weather board of 12mm thick playwood including all necessary requirement complete |
| 180 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever require |
| 181 | Carriage of Cement /steellead upto 65km by MT. |
| 182 | carriage of sand /Bajree up to lead of 40 km by MT. |
| 183 | Carriage of Stone upto a lead of 50KM by MT. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
