|
| 1 | Dismantling old plaster or skirting rakingout joints and cleaning the surface forplaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Removing white or colour wash by scrappingand sand papering and preparing the surface smooth including necessary repairs to scrarches etc. complete |
| 3 | Earthwork in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as per direction of Engineer-in-charge , within a lead of 50m - all kinds of soil |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 fine aggregate : 10 graded stone aggregate 40mm nominal size). |
| 5 | Brick work with common burnt clay F.P.S(non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6fine aggregate) |
| 6 | Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cementmortar 1:4 (1 cement : 4 fine aggregate) |
| 7 | Providing and laying in position specifiedgrade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 fine aggregate : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams , girders , bressumers and catilevers |
| 9 | 15mm cement plaster on the rough side ofsingle or half brick wall of mix - 1:4 (1cement : 4 fine aggregate) |
| 10 | 12mm cement plaster of mix -1:4 ( 1 cement : 4 fine aggregate |
| 11 | Providing and laying vitrified floor tiles of size 600 600 mm (thickeness top be specified by the manufacture) with waterr absoption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mm think cement mortar 1:4 ( 1 cement: 4 fine aggregate) jointing withgrey cement slurry @3.3 kg per sqm etc., completer-size of tiele 600 x 600 mm |
| 12 | Providing and laying rectified glazedceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming toIS:15622 of approved make in all colours , shades, except white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 fine aggregate) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 14 | Steel work in built up tubular (round,square or rectanglar hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - hot finished welded type tube |
| 15 | Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc |
| 16 | Providing and fixing colour coated galvalume sheet of 550 M.P.A. yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31 mm pitch of 250 mm and overall width of 1060 mm and thickness 0.5mm with required J or C hook bolts and nuts 8mm dia G.S.paint and working etc., complete excluding the cost of purlin , rafter and truss etc., |
| 17 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content - with water thinnable cement primer on wall surface having VOC content less than 50 grams / litre |
| 18 | Finishing with deluxe multi surface paint system for interiors and exteriors using prime as per manufacture specification- Two or more coats applied on wells @1.25 ltr/10sqm over and including one coat of special primer applied @0.75ltr/10sqm |
| 19 | Painting with synthetic enamel paint of approved brand and anufacture of required colour to give an even shade- One or more coats on old work |
| 20 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade - one or more coats on old work |
| 21 | Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars Fe - 500D or more |
| 22 | Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flusing cistren, including flush pipe , manually controlled device (handle lever) conforming to IS : 7231 , with all fittings and fixtures complete , including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C.pan of size 580x440mm with integral type foot rests. |
| 23 | Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 20 mm nominal outer dia pipes |
| 24 | Providing and fixing Chlorinated PolyvinnylChloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 25mm nominal outer dia pipes |
| 25 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover ISI: 12701 marked, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support including fittings and fixtures for tank shall be paid separately |
| 26 | Providing and fixing C.P.brass bib cock ofapproved quality conforming to IS: 8931 - 15 mm nominal bore |
| 27 | Providing and fixing gun metal non -returnvalve of approved quality (screwed end) - 25mm nominal bore - horizontal |
| 28 | Providing and fixing on wall faceunplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter |
| 29 | Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend |
| 30 | Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe |
| 31 | Supplying and fixing of the following sizes of Teak woodenboard on recess including cutting the wall and finishing the surface good the same as required - 300mm X 250mm X50mm. Deep |
| 32 | Providing and fixing of following size phenolic coated sheet on existing wooden board: - 300mm X 250mm X 3mm Thick |
| 33 | Supplying and drawing of 1.5 sqmm. FR PVC insulated,copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:- |
| 34 | Supplying and drawing of 2.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existingsurface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:- |
| 35 | Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required . Make: Kundan / Anchor /Vinay :- |
| 36 | Supplying and fixing 3 pin 5/6amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make: Kundan/ Anchor/Vinay:- |
| 37 | Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make: Kundan/ Anchor/ Vinay:- |
| 38 | Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make: Kundan/ Anchor/Vinay:- |
| 39 | Supplying and fixing 5/6amps indicator on the existing switch box/cover including connections etc. as |
| 40 | Supplying and fixing of 20A single phase DP main switch with Keycard Switch on the existing modular plate and switch box including connections but excluding modular plate as required. Make: MK :- |
| 41 | Supplying and fixing 6 amps to 32 amps rating ,Single pole,240 volts,\"c\" series,miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make : ABB/L&T Hager |
| 42 | Supplying and fixing of sheet steel, DP switch Rewirable porcelain fuse unit, 230volts including drilling holes on the board, connections, earthing the body etc. as required:-16Amps double pole main switch.Make:Standard/Havells |
| 43 | 1 x 40W box type single tube light fitting with copper choke & starter with tube. Make: Philips/Bajaj40W tube light. Make: Philips |
| 44 | Bulk head fitting aluminium alloy body heat resistant prismatic glass cover with specially designed gasket (GLS 100W type). Make: Philips/Bajaj |
| 45 | 1 x 36w/40w Single tube Street light fittings with sheetaluminium housing and UV stabilized acrylic cover. Make: Philips/Bajaj |
| 46 | 1200mm sweep double ball bearing ceiling fan.Make : Almonard/Usha |
| 47 | Supplying and fixing Step type socket Fan Regulator on the existing switch box/cover including connections etc. asrequired. Make: Kundan/Anchor/Vinay:- |
| 48 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc.complete - Anodized (AC 15) aluminium |
| 49 | Providing and fixing ISI marked oxidised each M.S. sliding door bolts with nuts and screws etc.complte - 300 X 16 mm |
| 50 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws (copper oxidised as per 1378) etc.complete - 250 x10 mm |
| 51 | Providing and fixing ISI marked oxidisedM.S. tower bolt black finish (Barrel type) with necessary screws (copper oxidised as per 1378) etc.complete - 100x10mm |
| 52 | Providing and fixing of 65mm Navatal lock of 6 levers etc complete |
| 53 | Cement concreate flooring 1:2:4(1 cement: 2 fine aggregate : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of noising of steps etc. complete - 40mm thick with 20mm nominal size stone aggregate. |
