|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA)). |
| 4 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 5 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 7 | (a) Old work (one or more coats) |
| 8 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 9 | (a)work (two or more coats) |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 11 | ( a) Two or more coats on new work. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 13 | One or more coats on old work. |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 15 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 16 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 17 | (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 18 | Disposal of building rubbish / malba / similar unserviceable, dismantledor waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or asapproved by Engineer-in-charge, beyond 50 m initial lead, for all leadsincluding all lifts involved. |
| 19 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet |
| 20 | Sand Cast Iron S&S as per IS: 1729. |
| 21 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 22 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 23 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 24 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 25 | Orissa pattern W.C. pan of size 580x440 mm |
| 26 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 27 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 28 | White solid plastic seat with lid |
| 29 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe |
| 30 | (a) 32 mm dia |
| 31 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 32 | (a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 33 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length |
| 34 | (a) 20 mm nominal bore |
| 35 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 36 | © 25mm nominal bore. Weighing not less than 62 gms. |
| 37 | Providing and fixing PTMT angle stop cock 15 mm nominal bore,weighing not less than 85 gms |
| 38 | (a) 15mm nominal bore |
| 39 | Providing and fixing PTMT grating of approved quality and colour. Circular type. |
| 40 | 100 mm nominal dia. |
| 41 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 42 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 43 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 44 | 15 mm to 40 mm nominal bore |
| 45 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work |
| 46 | (a) 15 mm dia. nominal bore |
| 47 | (b) 20 mm dia. nominal bore |
| 48 | © 25 mm dia. nominal bore |
| 49 | (d) 32 mm dia. nominal bore |
| 50 | Deduct for not making trenching and refilling work on above Item no 01(a) ,01 (b)©,(d) |
| 51 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 52 | (a)25 mm nominal bore |
| 53 | (b)20 mm nominal bore |
| 54 | © 32 mm nominal bore. |
| 55 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 56 | (a) 15 mm nominal bore |
| 57 | (b) 20 mm nominal bore |
| 58 | (c)25 mm nominal bore |
| 59 | (d) 32 mm nominal |
| 60 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 61 | (a) 15 mm nominal bore. |
| 62 | (b) 20 mm nominal bore. |
| 63 | © 25 mm nominal bore. |
| 64 | (d) 32 mm nominal bore. |
| 65 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
| 66 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 67 | Twin rubber stopper |
| 68 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 69 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 70 | Flat back wash basin of size 550x400 mm. |
| 71 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 72 | 10 litre capacity - White |
| 73 | Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab |
| 74 | 40 to 50 mm thick |
| 75 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 76 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 77 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 78 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 79 | Cleaning of old wall/ floor tiles already laid Cleaning of toilets & urinals , wash basin, EWC Pan with cleaning agents, applying disinfactant and deodorant &cleaning of urinal pans by hand brush.complete as per direction of Engineer in Charge. (a) For Toilet up to area 10 sqm |
| 80 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 81 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked |
| 82 | Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 83 | 100x58x1.90 mm |
| 84 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) |
| 85 | 250x16 mm |
| 86 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 87 | 250x10 mm |
| 88 | 150x10 mm |
| 89 | Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378). |
| 90 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 91 | 100 mm |
| 92 | Credit for unserviceable material |
| 93 | (a) PVC material in the formof sanitary fiitings / installation |
| 94 | (b) Mild steel iron in the form of old windows /steel bars etc |
