|
| 1 | Schedule \"A\" Section - I |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 4 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge. |
| 5 | Taking down shutters of any description n. exc 1 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge. |
| 6 | Supply and fixing 125 x 60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified . |
| 7 | Supply and fixing 105x60mm pressed steel frames 1.25mm thickfor doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified . |
| 8 | Material and labour for 2nd class hard wood as in plain, solid, straight chawkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put to gather with glue pinned at joints complete all as specified & directed by Engineer-in-Charge. |
| 9 | Supply and fixing Factory made plain, framed, panelled shutters, 35mm thick of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat one coat of pink primer, complete all as specified & directed by Engineer-in-Charge. |
| 10 | Supply and fixing 2nd class hard wood 35mm thick made glazed and skeleton shuttersopen rebated and prepared to receive glass, gauze,etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of door shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed |
| 11 | Supply and fixing solid PVC door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mmmade out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete. |
| 12 | Supply and fixing 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC \"C\" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Eng-in-Charge and all as per drawing / manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete |
| 13 | Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 14 | Supply and fixing in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as dircted by Engineer-in-Charge. |
| 15 | Supply and fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 16 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsexc 1.50 sqm complete all as specified and as dircted by Engineer-in-Charge. |
| 17 | Supply and fixing 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading, any type) in squares n.exc. 0.5 sqm in each pane complete all as specified anddircted by Engineer-in-Charge. |
| 18 | Supply and fixing 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge |
| 19 | ditto as Item No. 17.00 above but in repairs |
| 20 | Supply and fixing Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified & directed. |
| 21 | Supply and fixing barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. |
| 22 | Supply and fixing barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed. |
| 23 | Supply and fixing aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed. |
| 24 | Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts, fixed on plate or staple plate complete all as specified & directed. |
| 25 | ditto as Item No. 23.00 above but in repairs |
| 26 | Supply and fixing double leagedfloor door stopper of over all length of cover plate 140 mmof aluminium alloy body and tongue anodizedwith hard drawn steel springfixed in floorall as specified |
| 27 | Ditto as per Item No. 25.00 above but fixed in repair |
| 28 | Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Material and labourpreparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats ofsynthetic enamel paint over a coat of wood primer complete all as specified and directed. |
| 30 | Material and labour forpreparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paintover a coat of red oxide primer all as specified. |
| 31 | Supply and fixing Stainless steel 20 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall in repairs,with finols/finnels, connected accessaries, rubber packing, required screws and rawal plugs, complete all as specified and directed. |
| 32 | Supply and fixing in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified. |
| 33 | Supply and fixing for Prelaminated Medium density fibre board 18/19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed to timber framework with screws as in walls panelling, almirah, kitchen cabinates etc, fixed in repair, complete all as specified and directed by Engineer-in-charge. |
| 34 | Material and labour for external teak wood lipping (decorative), 6mm thick of block board or veneered particle board/MDF fixed with nails complete all as specified and directed. |
| 35 | Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair includingtaking out the existing complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and fixing magnetic catches 75mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and fixing 40mm dia cupboard knob of brass, polished,fixed with nut screw and washer, fixed as in repairscomplete all as specified and directedby Engineer-in-Charge. |
| 38 | Supply and fixing bib cock long neck with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 39 | Supply and fixing in repairs Stop/Angle valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 40 | Supply and fixing brass CP kitchen waste coupling of chromiuim plated with rubber washer of design and pattern suit to existing waste couplings with and including 32mm PVC waste pipe heavy duty as in repair complete. |
| 41 | Supply and fixing brass CP WHB/Urinals waste coupling of chromiuim plated with rubber washer of design and pattern suit to existing waste couplings with and including 32mm PVC waste pipe heavy duty as in repair complete. |
| 42 | Supply and fixing chromium platedshower rose with or without swivel joints 150mm dia including fixing to steel pipe, fixed as in repairs complete all as specified and directed. |
| 43 | Supply and fixing central hole Basin Mixer, WHB/Bathroom, Kitchen , without poupwaste system and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 44 | Supply and fixing telephonic wall mixerwith hand shower for Bathroom 2 in 1without poupwaste system with 1.00 m long silver tube/pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 45 | Supply and fixingin repairsbrass chromium plated tubular towel rail 20mm dia \"D\" type 60 cm long between flanges complete all as specified |
| 46 | Supply and fixing CP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) and fixed in position as in repairs complete all as respect as specified |
| 47 | Supply and fixing in repair, PVC bathroom mirror cabinet size 400x500mm, selected quality, single door, wall mounted plastic multi utility type, complete. |
| 48 | Supply and fixing PVC flexible pipe 32 mm(non-folding) suitable for WHB/ Sink/Urinals, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing 15mm dia PVC connection with PTMT nut,of length 450mm, fixed as in repairs complete all as specified and directed. |
| 50 | Supply and fixing 15mm dia PVC connection with PTMT nut,of length 750mm, fixed as in repairs complete all as specified and directed. |
| 51 | Supply and fixing 600x450 mm bevelled edge mirror of selected glass mounted on 6mm tick AC buildingboard or commercial plywood and fixed to wooden on plugs with chromium plated brass screws and cup wasgers complete all as specified. |
| 52 | Supply and fixing Viterious china toilet paper holder colour, in repair, complete all as specified and as directed |
| 53 | Supply and fixing Grating square 100/125 mm size (openable) of Stainless steel(Minimum weight 100gms) complete all as specified and directed. |
| 54 | Supply and fixing Grating square 150 mm size (openable) of Stainless steel (Minimum weight 100gms) complete all as specified and directed. |
| 55 | Supply and fixingPVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor including taking down existing complete all as specified & directed. |
| 56 | Supply and fixing in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe complete all as specified and directed. |
| 57 | Supply and fixing in repair, mild steel chromium plated Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 58 | Supply and fixing in repairs, combined of viterous china wash down water closet pan (pedestal patten) white with flushing cistern , brackets and flushing pipe, seat cover, completeand making all necessary connection to make the system fully functional, complete all as specified and as directed . |
| 59 | Supply and fixingwash hand basin, vitreous china, white, decorative type, flat or angleback, size 550mm x 400mm incliding cutting for and pinning in ends of brackets orerecting stand, incl CP waste coupling but exclusive of pillar tap andwaste pipe, fixed as in repairs complete all as specified. |
| 60 | Material and labour for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repairs complete all as specified and directed. |
| 61 | Supply and fixing in repair, rectangular sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs, complete all as specified and directed by Engr-In- Charge. |
| 62 | Supply and fixing Fancy type elegant corner glass shelf of radius 300 mm with 300x600 mm size including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed. |
| 63 | Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site complete all as specified and directed. |
| 64 | Supply and fixing Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple(inlet & outlet) etc. but excluding connection of ball valve, over drain pipecomplete all as specified and directed. |
| 65 | Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site complete all as specified and directed. |
| 66 | Supply and fixing Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed. |
| 67 | Material and labour for cleaning existing RCC/PVC Tank of capacity exc 250 ltrs but n.exc 500 Ltr by mentioned process all as directed by Engr-in-chrge. |
| 68 | Same as item No 66.00 above, but capacity exc 500 ltrs but n.exc 1000 Ltr all as directed by Engr-in-chrge. |
| 69 | Note: For above items Tank cleaning process (a) Dewatering & Removing all settled silt, scale & Dust from inside of tanks using brush manually and applying bleaching power, allowed to rest for 1 hour. (b) Cleaning and rinsing the tank using fresh water to wash out complete and allowed to dry for 30 min. (c) Writting detals of 7 cm height using synthetic enamel paint(white/black colur) to mention date of cleaning including rubbing out old letters written over the tank, complete as specified. |
| 70 | Supply & fixingPVC cover for water tank capacity exc. 250 litres but n. exc. 500 litres, Threaded or flap type including fixing new MS hinges and staples made for purpose, fixed as in repairs complete all as specified and directed. |
| 71 | Same as item No 69.00 above, but capacity exc 500 ltrs but n.exc 1000 Ltr all as specified. |
| 72 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 73 | Material and labour for joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) and incl dismantling old floor tiles with bed, complete all as specified and directed by Engr-In- Charge. |
| 74 | Material and labour for joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4 and incl dismantling old wall tiles with bed,complete all as specified and directed by Engr-In- Charge. |
| 75 | Material and labour for Rendering 15mm thick on fair faces of old brick/stone or concrete surfaces at any height incl walls, cornices etc. in CM 1:4 finished even and smooth without using extra cement (External surface) & curing and incl taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 76 | Material and labour for Rendering 15mm thick on fair faces of old brick/stone or concrete surfaces at any height incl Pillars, cornices, chajjas (top & facia sides), sun shades etc making sharp corners in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface) & curing and incl taking down old plaster, complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 77 | Supply only Integral waterproofing compoundall as specified as per manufacture instruction complete all as specified and directed by Engr-In- Charge. |
| 78 | Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement(Internal surfaces) and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 79 | Material and labour forfor applying3 mm thick (achieved in two coats) wall careputty of new undecorated plastered surfaces of wallcomplete all as specified and directed |
| 80 | Material and labour for Rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 81 | Material and labour preparatin of new / previously untreated surface walls & ceiling by applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge. |
| 82 | Material and labour for complete removal of existing treatment from internal surfaces on walls by wire brushes, sand paper and iron patti / flat & stopping of surfaces & leveling/ edging the disturbed places/edges and applyingcompound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of alkali-resistant primer, complete all as specified and directed by the Engineer-in-Charge. |
| 83 | Material and labour for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 84 | Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 85 | Material and labour machine cut Granite slab 15 mm thick as in steps, pillars,window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing, polshing and dismantling old granite with bed, complete all as spd. |
| 86 | Material and labour for Rounding to edges of stone slabs any thick as in in steps, jambs, pillars, cokking plateforms and likes complete all as specified |
| 87 | Supply and fixing Flush shutters 30 to 35mm thick for door shutter, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed. |
| 88 | Material and labour for preparation of plastered or unplastered old decorated surfaces with sand papering of walls incl cornices etc. incl washing, rubbing down and stopingthe connected previously treated surfaces and applying one coat of acrylic emulsion exterior/interior quality (Apex painting) (tint as approved by GE) complete all as specified. |
| 89 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures\"s instructions and fixed with self thread making steel screws of length not less than 50mm and incl dismantling old sheets, complete as directed by Engr-in-Charge. |
| 90 | Same as item No 88.00 above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc and incl dismantling old sheets, complete all as specified. |
| 91 | Supply and fixing anodised powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer in Charge. |
| 92 | Supply and fixing anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in Charge. |
| 93 | Supply and fixing Anodised aluminium grill or guard bars fixed to aluminium window, weight not less than2.82 kg/Sqm complete all as specified incl powder coating with powder coated colour as approved by GE complete all as specified and directed by Engineer -in- Charge. |
| 94 | Supply and fixing 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed by Engineer in Charge. |
| 95 | Supply and fixing in repair false ceiling with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles at all height with GRG (Glass fibre reinforced gypsum) false ceiling tiles with Semi perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tile595mmx595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4) - 1970 and light reflctance of 85% minimum to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120grams per Sqm incl both sides) comprising of main T-runners of size 15x32mm of length 1200mm, and secondry intermediate cross T- of size 15x32mm of length 600mm to from grid moudle of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) ie 50mm long, 8mm outer diameter M*6 dash fasteners, 6mm dia fully threated hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screwscomplete all as specified and directed. |
| 96 | Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete. |
| 97 | Material and labour for point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including cutting chiseling and grouting concealed (Any type Wall) PVC conduit pipe, tee, elbow and bend etc.andwith all connecting accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thicklaminated sheet top cover or cover plate and metal box fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :- |
| 98 | One light/Fan point controlled by one 5 Amps switch one way |
| 99 | One light point controlled by two way switch one way |
| 100 | One bell point controlled by one switch |
| 101 | One 3 pin socket point 5 Amp on independent board |
| 102 | One 3 pin socket point 5 Amp on same board with other switches. |
| 103 | All as per item No. 96.00 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 104 | All as per item No. 96.00above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 105 | Point Wiring with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulatedStranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductorand connected to Common Earth Dolly or as directedand MS terminal box with 3mm thick masonite laminated sheet top cover fixed or cover plate and metal box on Wallfor one light and fan point controlled by one switchcomplete all as specified and as directed are as follows :- |
| 106 | One light/Fan point controlled by one 5 Amps switch one way |
| 107 | One bell point controlled by one 5 Amps switch one way |
| 108 | One light point controlled by two way switch one way |
| 109 | One 3 pin socket point 5 Amp on independent board |
| 110 | One 3 pin socket point 5 Amp on same board with other switches. |
| 111 | All as per item No. 99.00above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 112 | All as per item No. 99.00 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 113 | Supply and fix Switch piano, flush button single pole, 6 Amps one way complete all as specified and directed. |
| 114 | Supply and fix for modular switch, 10 Amp, one way complete all as specified and directed. |
| 115 | Supply and fix Switch piano, flush button single pole, 16 Amps one way complete all as specified and directed. |
| 116 | Supply and fix for modular switch, 16 Amp, one way complete all as specified and directed. |
| 117 | Material and labour for switch piano,flush type, single pole 2 way 6 Amp,ISI marked complete all as specified and directed. |
| 118 | Supply and fix bell push, flush button single pole, 6 Amps one way complete all as specified and directed. |
| 119 | Supply and fix for modular bell push, 6 Amp, one way complete all as specified and directed. |
| 120 | Supply and fix Sokcet outlet, 2 in 1, flush type 6 Amp 2/3 pin muliti purpose complete all as specified and directed. |
| 121 | Supply and fix modular socket 06 Amp 2/3 pin combined 2 module complete |
| 122 | Supply and fix Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose complete all as specified and directed. |
| 123 | Supply and fix modular socket 6/16 Amp 2/3 pin combined 2 module complete all as specified and directed. |
| 124 | Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 125 | Supply and fix modular Fan step regulator suitable for BLDC fan, 120W - 2 module complete all as specified and directed. |
| 126 | Supply and fix in repair Door bell electronic, music type,230 volt ACcomplete all as specified and directed. |
| 127 | Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVCblocks complete all as specified and directed. |
| 128 | Supply and fixing in repair Lamp holder,PVCinsulated body, with back plate suitablefor batten fitting complete all as specified and directed. |
| 129 | Supply and fixing in repair LED bulb 09 watt complete all as specified and directed. |
| 130 | Supply and fixing in repair Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base complete all as specified and directed. |
| 131 | Supply and fixing in replacement Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours. |
| 132 | Supply and fixing in replacement LED tube light fitting of20 watts 6000K , 230 volt, withBasic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver complete with all fixing accessories and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 133 | Supply and fixing in replacement LED tube light fitting of10 watts 6000K , 230 volt, with Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all fixing accessories and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 134 | Supply and fixing in repair Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed. |
| 135 | Supply and fix in replacement Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. |
| 136 | Supply and fix in replacement Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. |
| 137 | Single pole and Neutral Sheet metal enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 138 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board SPN, 240 volts,8 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified. |
| 139 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board SPN, 240 volts, 12 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified. |
| 140 | Supply and fix in repair MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity complete all as specified and directed. |
| 141 | fixing only serviceable MCB SP/SPN/TPN any capacity complete all as specified and directed. |
| 142 | Supply and fix in repair MCB single pole & neutral 32 Amps 240 volts, C series,10 kA rupturing capacity complete all as specified and directed. |
| 143 | Supply and fix in repair MCB single pole & neutral 40-63 Amps 240 volts, C series,10 kA rupturing capacity complete all as specified and directed. |
| 144 | Supply and fix in repair Switch piano, flush button single pole, 6 Amps one way complete all as specified and directed. |
| 145 | Supply and fix in repair Switch piano, flush button single pole, 16 Amps one way complete all as specified and directed. |
| 146 | Supply and fix in repair bell push, flush button single pole, 6 Amps one way complete all as specified and directed. |
| 147 | Supply and fix in repair Sokcet outlet, 2 in 1, flush type 6 Amp 2/3 pin muliti purpose complete all as specified and directed. |
| 148 | Supply and fix in repair Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose complete all as specified and directed. |
| 149 | Supply and fix in repair fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 150 | Amount of credit of Rs. 94320.17 for retrived old material as mentioned in Schedule \"A\" section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
