|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | P/L stone soling nallah hand packed in bed including all carriages etc complete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) with carriage of agg- and sand |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage of materials |
| 5 | Reinforced cement concrete 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement with carriage of agg- and sand |
| 6 | Steel reinforcement for R.C.C.work including straightening cutting,bending, placing in position and binding all complete (thermo mechnically treated bars )including all carriages complete . |
| 7 | Dry random rubble masonry with hard stone in the pit including carriage of same from approved source upto site of work complete |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for walls of any thickness |
| 9 | Brick Work of bricks class desgination 75 in superstructer above plinth level in cement mortar in 1:6 mix including upto floor v level with carriage from approved source to site of work complete job |
| 10 | 15 mm thick cement plaster in 1: 4 cement mortar |
| 11 | Providing and laying 60mm thick coloured factory made cement concrete interlock paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge |
| 12 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 13 | Providing & Fixing PVC ( Prince Make) pipe incl. cost of rubber washer and adhesive complete type B |
| 14 | 100 mm |
| 15 | 75 mm |
| 16 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 17 | 510x1040mm bowl depth 250mm |
| 18 | Providing and fixing 25 ltr water Gyser with all fixturers of approved brand complete job |
| 19 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 20 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing no less than 105 gms. |
| 21 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 22 | Providing and fxing decorative wall mirrors with all fixtures and fastenings complete job |
| 23 | Providing and fixing 200 mm dia exhaust fan of approved brand including wiring etc complete job |
| 24 | Providing and fixing plastic corner shelves with all fixtures and fastenings complete job (1 set) |
| 25 | Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws of approved brand etc all complete job |
| 26 | Providing & Fixing following C.P fittings of standard quality incl. all fixtures complet |
| 27 | 15 mm dia Brass bib cock |
| 28 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 29 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 30 | Providing and fixing pvc flushing tank/ cistern of 10 lt capacity approved brand wall mounted complete job. |
| 31 | Providing and fixing 50 ltr water Gyser with all fixturers of approved brand complete job |
| 32 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 33 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete (on steel work) |
| 34 | Providing and fixing of floor matting (thermocole) on the floor of of approved quality and brand as per site engineer etc all complete job |
| 35 | Providing and fixing of floor carpet on the floor of of approved quality and brand as per site engineer etc all complete job |
| 36 | Electric Part |
| 37 | Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch, modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/Anchor/ Finolex/KEI/RR or equivalent make) excl. cost of conduit. |
| 38 | Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) excl. cost of conduit |
| 39 | Supplying and fixing of suitable size Gl box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent) |
| 40 | Supplying and fixing of suitable size Gl box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq. |
| 41 | Supplying and fixing of modular sockets/indicators/switches on existing modular plate and switch box, incl. connections, etc. as required. (Havells/ SSK/Anchor/ABB/Schneider or equivalent) |
| 42 | i.3 pin 5A - 10A socket |
| 43 | ii. Indicator |
| 44 | Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing), (Maximum two points shall be connected on one circuit). (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) excl. cost of conduit |
| 45 | Supply, installation, testing and commissioning of 14 Watt LED Bulb, incl. cost of angle/ batten holder with base block. (Havells/ Philips/ Crompton/ Wipro/ Halonix). |
| 46 | Supply, installation, testing and commissioning of 1 star 1200 mm sweep ceiling fans of Havells / Crompton Greaves/Bajaj/ Usha, incl. cost of extension of Gl rod (if required) and making of necessary connections. |
| 47 | Supply and fixing of single module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excl. modular plate etc. as reqd |
| 48 | Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton). |
| 49 | Supplying and fixing of modular blanking plates on existing modular plate and switch box, excluding modular plate as required |
| 50 | Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excl. cost of conduits (Havells/ Polycab/ Finolex/Anchor/KEI/RR or equivalent) |
| 51 | 2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire |
| 52 | 2 x 4 sq.mm + 1x 4 sq. mm earth wire |
| 53 | 2x10 sq.mm + 1x 6 sq. mm earth wire |
| 54 | Supply and fixing of 16 way, Double door surface/ recess mounting。 Horizontal type, 240 V, SPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBS, excluding cost of MCBs and Incomer. (Havells/Legrand/SSK) |
| 55 | Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 ΚΑA \"C\" curve MCB of Legrand/ Havells/ E&T suitable for Inductive load in the MCB distribution board complete with necessary connections. |
| 56 | Supply, installation, testing and commissioning of 32 A DP rating 240V, 10 KA \"C\" curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 57 | Supply, installation, testing and commissioning of 63 A DP rating 240V, 10 KA \"C\" curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 58 | Supply, installation, testing and commissioning of wall/floor mounted, 240 volts, compartmentalized, SPN MCCB main distribution panel, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices NORMAL INCOMING 125A DP MCB 10KA 01 no. 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicator 01 set OUTGOING 63A DP MCB 10KA 04 no. 32A DP MCB 10KA 01 no. |
| 59 | Supply, laying, connecting and commissioning of 50 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable (armoured), incl. cost of required al. thimbles duly crimped.(over head) |
| 60 | Supply and fixing of 25 mm dia./25 mm wide batten Medium grade PVC conduit including its allied accessories like bends and fan deep/concealed boxes, etc. for laying of wires, recessed in RCC slab / walls and making good the same or fixed with necessary clips and rowel plugs complete. |
| 61 | Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding2.5 mtr. Long Gl earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2 dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. Please Enable Macros to View BoQ information |
