Tender For Renovation Of Transit House-1 At Nalco Township, Damanjodi, Damanjodi-Odisha

TDR : 54123009

Tender Notice
BOQ

26 Days Left

Damanjodi , Odisha

Tender Brief : Tender For Renovation Of Transit House-1 At Nalco Township, Damanjodi

Document Fees
Refer document

EMD
₹ 250000.0 /-

Tender Value
Refer document

Submission Date
19-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	1.1 Removingthe excavated materials, debris of anydescriptionand any other wastematerials, spoilheaps includingloading intotrucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at theearmarked places etc. complete for the following leads. Removal upto 1km inTownship/plant and mines area at low lying areas.
2	1.2 Removingthe excavated materials, debris of anydescriptionand any other wastematerials, spoilheaps includingloading intotrucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at theearmarked places etc. complete for the following leads.Removal upto 2km in Township/ Plant/Mines area at low lying areas.
3	1.3 Removingthe excavated materials, debris of anydescriptionand any other wastematerials, spoilheaps includingloading intotrucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at theearmarked places etc. complete for the following leads.Removal upto 3km in Township/ Plant/Mines area at lowlying areas.
4	2.1 Earthwork in Excavationoverareasin alltype of soil ( exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan),including disposal of excavated earth within a leadof50 mtrs and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
5	3.1 Earth work in Excavation in foundation Trenchesor drains (not exceeding 1.5 mtr in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift up-to 1.5 mtr,including getting out the excavatedsoil and disposal of surplus excavated soil as directed, within a lead of50 mtrs. All kinds of soil.
6	4.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.
7	4.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
8	5 Back filling with available excavated earth (excluding rocks) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 Mtr and lift up-to 1.5 Mtr.
9	6 Surface dressingmicro levelling in all types of soil other than rock to a depthnot exceeding 15 cm including cuttingand filling, levelling, rammingtothe desired formation level. The work includes excavation in over areas and fillingin low lying areaswithin a leadof 50 mtrs. as perinstructionofEngineer-in-charge.
10	7 Providing and Filling in plinth with sand under floors in trenches, sidesoffoundations etc. with approved quality sand and watering,ramming, consolidatingand dressing etc. all complete as directed by Engineer-in-Charge.
11	8 Cleaning rank vegetation and grass including removal of the rubbish out side the boundary to the places as instructedby Engineer-in-Charge,lead upto 50m.The rate shallincluding all types ofbushes and junglecutting and completecleaning andrakingoutof grasses.
12	9 Desiltingof drains (Open/Covered) at all lifts and disposal ofthe samewith in 50 metres oflead and evenlyspreading or stacking asdirected for disposal as per site condition etc. all as per instruction ofEngr-in charge including all labour, tools, tackles etc.all complete.
13	10 Making hole (up to 24 mm dia) for kitchen platform with necessary all tools and tackles complete.
14	11.1 Providing and laying plain cement concrete at alldepths below and upto plinth level in foundations, footings, non-suspendedfloorsincludingtamping, curing etc. but excluding the cost of centering and shutteringetc. asspecifiedordirected in any shape, position, thickness and finishing the topsurfacerough orsmooth etc. all complete. (CEMENTSHALL BE ISSUED FREE OF COST ATNALCO\"S STORE) P.C.C 1:2:4 (1 Cement: 2 Coarse sand: 4 Graded stone aggregates of 20mm nominal size)
15	11.2 Providing and laying plain cement concrete at alldepths below and upto plinth level in foundations, footings, non-suspendedfloorsincludingtamping, curing etc. but excluding the cost of centering and shutteringetc. asspecifiedordirected in any shape, position, thickness and finishing the topsurfacerough orsmooth etc. all complete. (CEMENTSHALL BE ISSUED FREE OF COST ATNALCO\"S STORE)P.C.C 1:3:6 (1 Cement: 3 Coarse Sand: 6 Graded stone aggregates of 20 mm nominal size)
16	12.1 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing : (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
17	13 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer\"s specification.
18	14.1 Providing and laying Reinforced Cement Concrete works withgraded stone aggregates of 20mm nominal size at slabs, roofs, stair cases, landing slabs, canopies, chajjas, bends, lintels, columns, walls, beams, lofts, projections, manhole covers, gully trap covers, valve chambers etc. as per drawing, specification and direction of the Engineer-in-charge at all heights and depths including vibration for consolidation, curing etc. complete excluding cost of centering and shuttering & steel reinforcement. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE) Up to Plinth level with RCC grade 1:1 1/2:3 (1 Cement : 1 1/2 sand: 3 graded stone aggregates of 20mm nominal size)
19	14.2 Providing and laying Reinforced Cement Concrete works withgraded stone aggregates of 20mm nominal size at slabs, roofs, stair cases, landing slabs, canopies, chajjas, bends, lintels, columns, walls, beams, lofts, projections, manhole covers, gully trap covers, valve chambers etc. as per drawing, specification and direction of the Engineer-in-charge at all heights and depths including vibration for consolidation, curing etc. complete excluding cost of centering and shuttering & steel reinforcement. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE) Above Plinth level with RCC grade 1:1 1/2:3 (1 Cement : 1 1/2 sand: 3 graded stone aggregates of 20mm nominal size)
20	15.1 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Foundations, footings, bases of columns, etc. for mass concrete
21	15.2 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
22	15.3 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Suspended floors, roofs, landings, balconies and access platform
23	15.4 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Lintels, beams, plinth beams, girders, bressumers and cantilevers
24	15.5 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Columns, Pillars, Piers, Abutments, Posts and Struts
25	16 Providing, hoisting and fixing at any depth and height precast reinforced cement concrete work in lintels, string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, drain covers etc. including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
26	17 Bending / Binding and placing in position reinforcement for all type of RCC work at all height and depths, carting / transport them form store/issue points to site of work, straightening, bending, binding to required shape and size as per details, including supplying and binding with soft annealed binding wire and placing with proper cover blocks, supports, etc all complete. (REINFORCEMENT STEEL SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
27	18 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
28	19 Laying brick masonry with fly ash bricks at any shape includingcuring, etc. complete in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and Plinth. ( CEMENTAND FLY ASH BRICK SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE / ISSUE POINT)
29	20 Laying brick masonry with fly ash bricks at all heights in any shape including scaffolding, staging, curing, etc. complete in cement mortar 1:6 ( 1 cement : 6 coarse sand)in Superstructure.( CEMENTAND FLY ASH BRICK SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE / ISSUE POINT)
30	21 Laying half brick masonry with fly ash bricks at all heights in any shape including scaffolding, staging, curing, etc. complete in cement mortar 1:4 ( 1 cement : 4 coarse sand)in Superstructure. (CEMENTAND FLY ASH BRICK SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE / ISSUE POINT)
31	22.1 Brick work with fly ash bricks at any shape includingcuring, etc. complete in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and Plinth. (CEMENTSHALL BE ISSUED FREE OF COST AT NALCO\"S STORE / ISSUE POINT)Cement mortar 1:6 (1 cement : 6 coarse sand).
32	23 Providing and laying Random Rubble Masonry with approved hard stone infoundation & plinth, walls, culverts, retaining walls with cementmotar 1:6 ( 1 cement : 6 coarse sand) including curing etc. all completeasper the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
33	24.1 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)Cement mortar 1:6 (1 cement : 6 coarse sand)
34	25 Laying Random Rubble Masonry with available boulders inside township infoundation & plinth, walls, culverts, retaining walls at all height & depth with cementmotar 1:6 ( 1 cement : 6 coarse sand) including curing etc. all completeasper the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
35	26 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 15 to 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishingand all colour etc. all complete as specified and as directed by the Engineer-in-Charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
36	27.1.1 Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including making hole at kitchen Platforms for Gas pipe. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)Granite of any colour and shade Area of slab upto 0.50 sqm
37	27.1.2 Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including making hole at kitchen Platforms for Gas pipe. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)Granite of any colour and shade Area of slab over 0.50 sqm
38	28.1 Providing edge moulding to 15 to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
39	29.1.1 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE) 8mm thick Granite of any colour and shade
40	30 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading.
41	31 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
42	32.1 Providing and fixing M.S.Grills of required pattern in frames of windows etc with M.S.Flat,square bar or round bar etc all complete. (All materials shall be in contractor\"s scope)Fixed to openings/wooden frames with rawl plugs screws / grouting in the wall with cement concrete 1:3:6 mix etc.
43	33 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
44	34.1 Providing 1 mm thick 35 mm wide bright finished stainless steel piano hinges and fixing with necessary screws etc., complete. Overall width 35 mm
45	35.1 Providing and fixing Stainless Steel sliding door bolts with nuts and screws etc. complete : 300x16mm
46	35.2 Providing and fixing Stainless Steel sliding door bolts with nuts and screws etc. complete : 250x16 mm
47	36.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm
48	36.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm
49	36.3 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm
50	37.1 Providing and fixing ISI marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm
51	37.2 Providing and fixing ISI marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm
52	38 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
53	39 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
54	40 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
55	41 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
56	42.1 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 50 mm
57	42.2 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 65 mm
58	43 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.
59	44 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.
60	45.1 Providing and fixing chromium plated brass handles with necessary stainless steel screws etc. complete: 125 mm
61	45.2 Providing and fixing chromium plated brass handles with necessary stainless steel screws etc. complete: 100 mm
62	45.3 Providing and fixing chromium plated brass handles with necessary stainless steel screws etc. complete: 75 mm
63	46.1 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type
64	46.2 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)
65	47.1 Providing and fixing 12 mm / 18 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors (Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick), windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured) and other similar & decorative / ornamental nature of works / Cup-board or Wardrobe partitions and shelves etc. as per the direction of the Engineer-in-Charge. 12 mm thick Marine plywood conforming to IS: 710
66	47.2 Providing and fixing 12 mm / 18 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors (Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick), windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured) and other similar & decorative / ornamental nature of works / Cup-board or Wardrobe partitions and shelves etc. as per the direction of the Engineer-in-Charge. 18 mm thick Marine plywood conforming to IS: 710
67	48.1 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick
68	48.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
69	49.1 Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
70	49.2 Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100 mm
71	49.3 Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 75 mm
72	50.1 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm
73	51 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full hreaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
74	52 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.
75	53 Providing &fixing eyepiece ordinary two lence non-adjustable including all labour, tools & tackles all complete as per the direction ofEngr-in-Charge.
76	54 Fabrication/ modification etc. including erection ofStructural Steel work true to level and alignment as per instruction of Engineer-in-Charge, including all materials, transporting to workshop, transporting to site,asper requirement for all types of structural steel/all types of doors/shuttrs/all types of windows/all types of ventilators, work including red oxide primer and all tools, tackles, consumables, supervision etc. at all height and locations etc. all complete as per direction of Engineer-in-Charge.(All the materials are in the scope of contractor)
77	55.1 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (All materials shall be in the scope of the contractor) Hot finished welded type tubes
78	56 Providing and fixing stainless steel ( Grade 304) railing, grill etc. and the like made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
79	57.1 Brick on edge flooring with fly ash bricks on a bed of 12 mm cement mortar, including filling the joints with same mortar, with non modular bricks: (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE) 1:6 (1cement : 6 coarse sand)
80	58.1 Brick on edge flooring with fly ash bricks on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: (CEMENT AND FLY ASH BRICKS SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE) 1:6 (1cement : 6 coarse sand)
81	59.1 Providing and laying Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including hacking wherever required all complete as per instruction of E.I.C: (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE) 20 to 25mm Kota stone slab
82	60 Providing and laying Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including hacking wherever required all complete as per instruction of E.I.C.(CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE)
83	61.1.1 Providing and laying vitrified floor tiles of approved make (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with epoxy sealent / white cement with matching pigment where required all complete as per instruction of EIC. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE).Glazed vitrified floor tiles polished finish ofSize of Tile 600x600 mm
84	62 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.
85	63 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.
86	64.1.1 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent), in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with epoxy sealent / white cement with matching pigment required for tile joints work shall be in the contractor\"s scope & matching pigments etc. complete.(GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE). (Epoxy sealent required for grouting of the tile joints for toilets, bathroom and white cement with matching pigment in the locations except toilets and bathrooms shall be in the contractor\"s scope.) Glazed vitrified floor tiles polished finish ofSize of Tile 600x600 mm
87	65.1.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) , in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE). White cementrequired for the work shall be in the contractor\"s scope. Glazed vitrified floor tiles polished finish ofSize of Tile 600 x 1200 mm
88	65.1.2 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) , in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE). White cementrequired for the work shall be in the contractor\"s scope. Glazed vitrified floor tiles polished finish ofSize of Tile 1200 x 1200 mm
89	66.1.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) , in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE). White cementrequired for the work shall be in the contractor\"s scope. Glazed Vitrified tiles (Matt/Antiskid) finish of size Size of Tile 600 x 600 mm
90	66.1.2 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) , in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE). White cementrequired for the work shall be in the contractor\"s scope. Glazed Vitrified tiles (Matt/Antiskid) finish of size Size of Tile 600 x 1200 mm
91	67.1 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm
92	67.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x1200 mm
93	68 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.
94	69 Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:
95	70.1 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade 85/25 or 90/15
96	71.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 75 mm diameter
97	71.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 110 mm diameter
98	72.1.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm
99	72.1.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm
100	72.2.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend
101	72.2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend
102	72.3.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm Shoe
103	72.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe
104	73.1 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm
105	73.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
106	74 Providing and laying 12mm thick cement plaster in cement mortar(1 cemnt : 6 fine sand) using approved sandincluding curing etc. all complete for all height.(CEMENTSHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
107	75 Providing and laying 15mm thick cement plaster in cement mortar 1:6 ( 1 cement : 6 fine sand ) on the rough sides of single or half brick wall or masonary work using approved type of sand including curing etc all complete for all height.(CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
108	76 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
109	77 Providing 6mm thickcementplasteron ceiling / concrete surface in cementmortar1:3(1 cement: 3 fine sand)including cleaning, preparation of surfaces, hacking of concrete faces,scaffolding if necessary, curingetc. completefor all heights.(CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
110	78 Neat cement punning. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
111	79.1 Pointing with cement mortar 1:3 over stone masonry/pitching worketc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE) Flush/ Ruled pointing
112	79.2 Pointing with cement mortar 1:3 over stone masonry/pitching worketc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE) Raised and cut pointing
113	80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
114	81.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
115	82.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New / old work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
116	83.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm).
117	84.1 Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
118	84.2 Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
119	85.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
120	85.2 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work
121	86.1 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 100 mm diameter pipes
122	86.2 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 150 mm diameter pipes
123	87.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
124	88.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
125	89.1 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new / old work
126	90.1 French spirit polishing : Two or more coats on new works including a coat of wood filler
127	91.1 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work
128	92 Lettering with Synthetic enamel paint of approved brand and manufacture. (Base painting shall be paid separately)
129	93 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.
130	94.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO STORE) With cement mortar 1:4 (1 cement : 4 fine sand)
131	95.1 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/ window/ clerestory window
132	96 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
133	97 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
134	98.1 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes
135	98.2 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 100 mm diameter pipes
136	98.3 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 150 mm diameter pipes
137	99.1 Polishing on wood work with ready made wax polish of approvedbrand and manufacture : Old work
138	100 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance works on superstructure above 3.50 metre height such as repair of chajja / fins / cornice / dripcourse / external wall plaster upto 10.00 Sqm. as per the direction of Engineer-in-Charge .
139	101 Providingandapplying crack filler to the wall cracks (not less than 3mm width) ofapprovedbrand&manufacture like \"crackseal by chemical adhesive (P) Ltd. after through cleaningofcracksfree from loose particles, applying the crackfilleralong thecracks, wiping excess materialsoffwithdamp spouse before drying,smoothingout the joints etc., all complete with labour and materials as perthedirectionofEngineer-in- Charge.
140	102 Corrosion protection of exposed reinforcement: Providing and applying Concrete penetrating corrosion Inhibitor (CPCI) over the entire surface in 2 coats typically @ of 4 m2/ltr/coat and Providing and applying two coats of Alkaline rust converter over the exposed reinforcement as per manufacturers specification and Providing and applying 2 coats of anticorrosive epoxy phenolic rebar protection system on the exposed reinforcement applying manually using brush as per manufactures specification. etc. complete as directed by Engineer-in-charge.(1) Concrete penetrating corrosion Inhibitor:EPCO KP-100(Krishna Conchem)/Sika Rustop(Sika)/PROTECTOSIL-CIT(BASF) or equivalent, (2) Alkaline rust converter: Feo Vert(Krishna Conchem)/Rust clear (ROFFE)/mbt rustkleen(BASF) or equivalent MasterEmaco p130(BASF)/ IPNET-RB(Krishna Conchem)/ or equivalent, (3) Anticorrosive epoxy phenolic rebar protection: MasterEmaco p130(BASF)/ IPNET-RB(Krishna Conchem)/ or equivalent
141	103 Epoxy Repair Mortar Sealing of cracks & honey combed patches: Providing & applying epoxy patching compound of approved brand as per manufacturers specification for sealing of cracks & honey combed patches including applying bond coat and finishing the surface etc. complete as per direction of Engineer In charge . Epoxy Mortar : Nitobond VF.(Fosroc)/ Sika Top77 (Sika)or Equivalent. Epoxy Bond coat & finish coat: NotobondEP (Fosroc) /Sika Hibond (Sika) or Equivalent
142	104 Crack Bridging waterproof Coating: Providing and applying Crack bridging water proof flexible coating as per manufacturer’s specification of approved brand, manually using brushes on the wet hardened concrete surfaces after cleaning the surface and removing all loose particles/deposits etc. complete as directed by the Engineer-in-charge. Crack bridging Water proof coating: Nitocote CM 210 (fosroc)/Sikagard XT White Base(Sika)/Master seal 180(BASF)/MKY Acquafin 2C(MYK SCHOMBURG) or equivalent.
143	105 Injection under water setting Epoxy grout: For Strengthening of RCC structure in water: Providing and injecting under water setting low viscosity epoxy grout as per manufacturer’s specification till the nipples refuses to take further grout etc. complete as directed by Engineer-In-charge. Epoxy grout (Underwater) : MASTERFLEX 801(BASF)/Cebex 250(Fosroc) or equivalent
144	106.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
145	107 Demolishing R.C.C. work manually/ by mechanical means (breaker / cutter)as suit at site including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
146	108 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
147	109.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
148	110.1 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction ofEngineer-in-charge : In cement mortar
149	111.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking complete and return to Departmental store: Of area 3 sq. metres and below
150	111.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking complete and return to Departmental store: Of area beyond 3 sq. metres
151	112.1 Taking out doors, windows and clerestory window shutters (steel or wood) from the chowkhats. Of area 3 sq. metres and below
152	112.2 Taking out doors, windows and clerestory window shutters (steel or wood) from the chowkhats. Of area beyond 3 sq. metres
153	113.1 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists
154	113.2 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats
155	114.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
156	114.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm
157	115.1 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe
158	115.2 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe
159	115.3 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 150 mm dia pipe
160	116.1 Dismantling G.I. pipes manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge. 15 mm to 40 mm nominal bore excluding excavation and refilling trenches.
161	116.2 Dismantling G.I. pipes manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge. 15 mm to 40 mm nominal bore including excavation and refilling trenches after taking out the pipes.
162	117.1 Dismantling of flushing cistern of following types including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. C.I.
163	117.2 Dismantling of flushing cistern of following types including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. PVC/Vitrious China
164	118 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directedby Engineer-in-charge.
165	119 Dismantling of oldfour course tarfelting from roof at all height & parapet wall and stacking dismantled tarfelts with in a lead of100M including all labour tools &tackles etc.all complite as per direction of engineer-in-charge.
166	120 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
167	121 Providing and laying gripped / matt finished vitrified tile of approved make (ENDURA of H & R Johnson or equivalent make) of size 300x300x9.8mm, in all colours and shades in for outdoor floors such as Parking area, footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc.complete as per direction of Engineer-in-Charge. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO\"S STORE). White cementrequired for the work shall be in the contractor\"s scope.
168	122.1 Providing and fixing white vitreous china water closet squatting pan (Indian type) of approved make (Hindware / Parryware / Cera or equivalent)Orissa pattern W.C. pan of size 580x440 mm
169	123 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan of approved make (Hindware / Parryware / Cera or equivalent)
170	124 Providing and fixing white vitreous china pedestal of approved make (Hindware / Parryware / Cera or equivalent) for wash basin completely recessed at the back for the reception of pipes and fittings.
171	125.1 Providing and fixing P.V.C. low level flushing cistern of approved make (Hindware / Parryware / Cera or equivalent) with manually controlled device (handle lever) conforming to IS : 7231, with fittings, accessories and necessary flush pipe complete. 10 litre capacity - White
172	126.1 Providing and fixing solid plastic seat of approved make (Hindware / Parryware / Cera or equivalent) with lid for pedestal type W.C. pan complete : Black/White solid plastic seat with lid
173	127 Providing and fixing white vitreous china flat backtype lipped front urinal basin of 420x395x635 mm sizes of approved make (Hindware / Parryware / Cera or equivalent).
174	128.1 Providing and fixing white vitreous china wall mounted wash basin of approved make (Hindware / Parryware / Cera or equivalent) including making all connections but excluding the cost of fittings: Flat back wash basin of size 450x300 mm
175	129.1 Providing and fixing white vitreous china table top wash basin of Jaguar makeincluding making all connections but excluding the cost of fittings: Table Top Basin 530x420x140, Model / Code No. JDS-WHT-25907N of Jaguar Make
176	130.1 Providing and fixing Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, connecting Legs & Wall Flange (without Hand & Overhead Shower) of Jaguar make, Model / Code No. KUP-35125PM all complete. 15 mm nominal dia.
177	131.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. Flexible pipe 32 mm dia
178	131.1.2 Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. Flexible pipe 40 to 50 mm dia
179	132 Providing and fixing swivel Mirror 630 X 445mm Model / Code No. AKP-35795 of Jaguar make inculding all fittings and fixing complete.
180	133.1 Providing and fixing glass shelf with guard rail of approved pattern of Jaguar make, Model / Code No.AKP-35771P all complete fixed with 40 mm long screws, rawl plugs etc. 600 mm long
181	134 Providing and fixing Toilet Roll Holder with Stainless Steel Flap of Jaguar make, Model /Code No. AKP-35753PS.
182	135 Providing and fixing Click Clack Waste 32mm Size Full Thread with 130mm Height for wash basin of Jaguar make. Model /Code No. ALD-727L130.
183	136.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
184	136.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
185	138.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
186	139 Providing and fixing liquid soap dispenser of Jaguar Make, Model / Code No. SDR-WHT-DJ0010FN with all necessary fittings complete.
187	140 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
188	141 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
189	142 Providing and fixing Towel rack 600mm long with lower hangers of Jaguar Make, Model /Code No. ACN-1181S including necessary fittings all complete.
190	143.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms
191	144 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes, weighing not less than 60 gms.
192	145.1 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms.
193	146 Providing and fixing white vitreous china Rimless Back To Wall WC (European type W.C. pan) of Jaguar Make. Model No - OPS-WHT-15955P180UFSM with concealed flush valve of Jaguar Make of Model / Code No. FLV-1095NG with all the necessary fittings complete.
194	147 Repairing of leaky \"S\"trap of WC pan includingnecessarycuttingandmaking goodthewallsetc.completein all respect. (brick work and filling the base concretetobepaidseparately).
195	148.1.1 Providing and fixing soil, waste and vent pipes : SWR Pipes single socket(Type-B) - Solfit pasting / Solvent type as per IS:13592 110 mm dia
196	148.1.2 Providing and fixing soil, waste and vent pipes : SWR Pipes single socket(Type-B) - Solfit pasting / Solvent type as per IS:13592 75 mm dia
197	149.1.1 Providing and fixing SWR fittings as per IS:14735 Plain bend of required degree 110 mm dia
198	149.1.2 Providing and fixing SWR fittings as per IS:14735 Plain bend of required degree 75 mm dia
199	149.2.1 Providing and fixing SWR fittings as per IS:14735 bend of required degree with access door 110 mm dia
200	149.2.2 Providing and fixing SWR fittings as per IS:14735 bend of required degree with access door 75 mm dia
201	149.3.1 Providing and fixing SWR fittings as per IS:14735 Door Tee 110 mm dia
202	149.3.2 Providing and fixing SWR fittings as per IS:14735 Door Tee 75 mm dia
203	149.4.1 Providing and fixing SWR fittings as per IS:14735 coupler 110 mm dia
204	149.4.2 Providing and fixing SWR fittings as per IS:14735 coupler 75 mm dia
205	149.5.1 Providing and fixing SWR fittings as per IS:14735 P-Trap with Leg 110 mm dia
206	149.5.2 Providing and fixing SWR fittings as per IS:14735 P-Trap with Leg 75 mm dia
207	149.6.1 Providing and fixing SWR fittings as per IS:14735 Nahani Trap 110 mm x 75 mm dia
208	149.6.2 Providing and fixing SWR fittings as per IS:14735 Nahani Trap 110 mm x 110 mmdia
209	149.7.1 Providing and fixing SWR fittings as per IS:14735 Gully trap with jalli 110 mm
210	149.8.1 Providing and fixing SWR fittings as per IS:14735 Providing and fixing terminal guard / cowl 110 mm dia
211	149.8.2 Providing and fixing SWR fittings as per IS:14735 Providing and fixing terminal guard / cowl 75 mm dia
212	149.9.1 Providing and fixing SWR fittings as per IS:14735 Door cap 110 mm dia
213	149.9.2 Providing and fixing SWR fittings as per IS:14735 Door cap 75 mm dia
214	150 Providing &fixing C.I.brackets of approved make for wash basin / sink including cutting & makinggood thewalls, taking outthe broken brackets etc. complete with labour & materials suitable for all size of sink or wash basin.
215	151.1.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes
216	151.1.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes
217	151.1.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal outer dia Pipes
218	152.1.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 25 mm nominal outer dia Pipes
219	152.1.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 32 mm nominal outer dia Pipes
220	152.1.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 40 mm nominal outer dia Pipes
221	152.1.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 50 mm nominal outer dia Pipes
222	152.1.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 75 mm nominal outer dia Pipes
223	153.1.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
224	153.1.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes
225	153.1.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes
226	154.1 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
227	155.1 Providing & fixing gun metal valve of approved make with CI wheel of approved make (screwed end) . 25mm dia nominal bore .
228	155.2 Providing & fixing gun metal valve of approved make with CI wheel of approved make (screwed end) . 32mm dia nominal bore
229	155.3 Providing & fixing gun metal valve of approved make with CI wheel of approved make (screwed end) . 40mm dia nominal bore
230	156.1 Providing & fixing high or low pressure ball valve/ball cock (brass) with plastic floats of approved quality complete. 20mm nominal bore
231	156.2 Providing & fixing high or low pressure ball valve/ball cock (brass) with plastic floats of approved quality complete. 25mm nominal bore
232	157.1 Providing and fixing brass ferrule with C.I. mouth cover includingboring and tapping the main : 25 mm nominal bore
233	158 Providing & Fixing 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers) of Jaguar make, Model / Code No. ALD-803AB
234	159 Providing & Fixing 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers) of Jaguar make, Model / Code No. ALD-805B
235	160.1 Providing & Fixing un-plasticised PVC connection pipe with brass unions: 15 mm nominal bore 45 cm length
236	161 Providing & fixing Shower head with shower arm inculding all fittings of Jaguar make [Shower Arm Straight 20mm dia. & 450mm Long Round Shape without Bend for Wall Mounted Showers with Flange of Jaguar make Shower head, Model / Code No. OHS-35495 & Overhead Shower 150X150mm Squarel Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System of Jaguar make Shower arm, Model / Code No. SHA-49483] complete with 15mm or 20 mminlet.
237	162 Fixing on position / terrace (at all floor levels)polyethylene water storage tank with cover and suitable locking arrangement including transporting the same from NALCO\"s store / issue point and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (polyethylene water storage tank with cover and suitable locking arrangement will be supplied free of cost by NALCO).
238	163 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
239	164.1 Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) of Jaguar make, Model / Code No. ALD-577 all complete:15 mm nominal bore
240	165.1 Providing and fixing Two Way Bib Cock with Wall Flange of Jaguar make, Model / Code No. ARI-39041. 15 mm nominal bore
241	166.1 Providing and fixing Jaguar make Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with Model / Code No. ALD-083, ALD-089 or ALD-081), Model / Code No. KUP-35083KPM and Regular Body of Concealed Stop Cock Suitable For 20 mm Pipe Line with Protection Cap (without Exposed Parts) of Jaguar make, Model / Code No. ALD-083 as per the direction of Engineer-in-Charge: 15mm nominal bore
242	167.1 Providing and fixing Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout (Compatible with Model / Code No. ALD-233N or ALD-235N) of Jaguar make, Model / Code No.LYR-38233NK & Left or Right Hand Side Operated Concealed Body for Single Lever Basin Mixer Wall Mounted, but without Exposed Parts of Jaguar make, Model / Code No. ALD-235N all complete. 15 mm nominal bore
243	168 Providing and fixing Telephonic Bath Hand Shower 95mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System of Jaguar Make , Model / Code No. HSH-1737 with Jaguar make Flexible Tube 8mm dia. & 1.5M Long with Nuts, Model No. SHA-549D8 & Jaguar make Wall Outlet with Shower Hook in Round Shape Model / Code No. SHA-566R all complete. (15 mm nominal bore)
244	169.1 Providing and fixing Angular Stop Cock with Wall Flange of Jaguar make, Model / Code No. KUP-35053PM all complete:15 mm nominal bore
245	170 Providing and fixing Pillar Cock with 140mm Extension Body of Jaguar make, Model No. ARI-39021 all complete. (15 mm nominal bore)
246	171 Providing and fixing 15mm nominal bore Pillar cock of approved make (Jaquar make, Model / Code No. OPP-15001PM) including removing the damaged one wherever required for new / old work:
247	172.1 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long.
248	172.2 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long.
249	173.1 Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long.
250	173.2 Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long.
251	173.3 Providing and fixing PTMT stop cock of approved quality and colour. Concealed stop cock, 15 mm nominal bore, 108 mm long
252	174.1 Providing and fixing PTMT Push cock of approved quality and colour. PTMT Push cock15 mm nominal bore, 80 mm long.
253	175.1 Providing and fixing PTMT grating of approved quality and colour (Circular type). Ashirwadd 125 mm nominal dia with 25 mm waste hole
254	176.1 Providing and fixing PTMT Ball cock of approved qualitity colour and make complete with epoxy coated aluminum rod with L.P. / H.P.H.D plastic ball. 15 mm nominal bore, 105 mm long.
255	176.2 Providing and fixing PTMT Ball cock of approved qualitity colour and make complete with epoxy coated aluminum rod with L.P. / H.P.H.D plastic ball. 20 mm nominal bore, 120 mm long.
256	176.3 Providing and fixing PTMT Ball cock of approved qualitity colour and make complete with epoxy coated aluminum rod with L.P. / H.P.H.D plastic ball. 25 mm nominal bore, 152 mm long.
257	177.1 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. Jaguar15 mm nominal bore with 45 cm length
258	178 Fixingof Geysers onwallsby cutting 4 nos of hole, grouting the same by putting 4 nos of GI bolts with nuts of 100mm long and 12mm dia withcementconcrete 1:2:4 (1 cement: 2 course sand: 4 graded stone aggregate of 12.5 mm & down size ) making goodthesurfacebyplaster finish, painting touch up etc. including making arrangement for waterconnection for which material shall be paid separately. (Geysers will be suppliedfreeof costbytheOwneratOwner\"sissue point). (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
259	179 Providing & fixing of GI / polythene covers of storage tankswith locking arrangements etc. all complete as per requirement .
260	180.1.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN ELBOW 90 DEGREE 15mm
261	180.1.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN ELBOW 90 DEGREE 20mm
262	180.1.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN ELBOW 90 DEGREE 25mm
263	180.1.4 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN ELBOW 90 DEGREE CPVC reducing elbow 20x15mm size
264	180.1.5 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN ELBOW 90 DEGREE CPVC reducing elbow 25x15mm size
265	180.1.6 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN ELBOW 90 DEGREE CPVC reducing elbow 25x20mm size
266	180.2.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC ELBOW (BRASS)90 DEGREE 20X15mm
267	180.2.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC ELBOW (BRASS)90 DEGREE 25X15mm
268	180.2.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC ELBOW (BRASS)90 DEGREE 25X20mm
269	180.3.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN TEE15mm
270	180.3.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN TEE20mm
271	180.3.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVCPLAIN TEE25 mm
272	180.4.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TEE (BRASS)20X20X15mm
273	180.4.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TEE (BRASS)25X25X15mm
274	180.4.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TEE (BRASS)25X25X20mm
275	180.5.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC REDUCING COUPLER 20X15mm
276	180.5.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC REDUCING COUPLER 25X15mm
277	180.5.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC REDUCING COUPLER 25X20mm
278	180.6.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN REDUCE TEE 20X20X15mm
279	180.6.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN REDUCE TEE 25X25X20mm
280	180.6.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN REDUCE TEE 25X25X15mm
281	180.7.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC COUPLER / SOCKET 15mm
282	180.7.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC COUPLER / SOCKET 20mm
283	180.7.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC COUPLER / SOCKET 25 mm
284	180.8.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC UNION 15mm
285	180.8.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC UNION 20mm
286	180.8.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC UNION 25 mm
287	180.9.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BALL VALVE 15mm
288	180.9.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BALL VALVE 20mm
289	180.9.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BALL VALVE 25 mm
290	180.10.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BUSHING 20X15mm
291	180.10.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BUSHING 25X20mm
292	180.10.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BUSHING 25X15mm
293	180.11.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC FAPT 15mm
294	180.11.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC FAPT 20mm
295	180.11.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC FAPT 25 mm
296	180.12.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC MAPT 15mm
297	180.12.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC MAPT 20mm
298	180.12.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC MAPT 25 mm
299	180.13.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TANK NIPPLE 20mm
300	180.13.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TANK NIPPLE 25 mm
301	180.13.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TANK NIPPLE 32 mm
302	180.14.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. POWDER COATED METAL CLAMP 15mm
303	180.14.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. POWDER COATED METAL CLAMP 20mm
304	180.14.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. POWDER COATED METAL CLAMP 25 mm
305	181.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make (i.e. JINDAL / HINDALCO or equivalent make), fixing with dash fastners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, and joined mechanically wherever required including cleat angle, locking cleat for locking arrangement, Aluminium snap beading for glazing / paneling, screws, all complete as per drawings and direction of Engineer-in-Charge. (No wastage will be paid). (Glazing, paneling to be paid for separately).For fixed portions: Power coated aluminium (minium thickness of powder coating 50 micron)
306	181.2.1 For shutters of doors, windows (Sliding or Casement) & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of rubber / neoprene gasket required. (fittings shall be paid separately). (No wastage will be paid).Powder coated aluminium (minimum thickness of powder coating 50 micron)
307	182.1 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with necessary screws etc. complete as per drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.
308	183.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with rubber / neoprene gasket wherever / if required for old / new work etc. complete as per the drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes / one way mirror glass panes of 5.5 mm thickness
309	184.1 Providing and fixing double action hydraulic floor spring with cover plate of approved brand and manufacture conforming to IS : 6315 with double spring mechanism for aluminium doors, including cost of cutting floors including removing the damaged one wherever / if required, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
310	185.1 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of engineerin-charge Powder coated minimum thickness 50 micron aluminium
311	186 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
312	187.1 Grading roof for water proofing treatment including hacking withCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
313	187.2 Grading roof for water proofing treatment including hacking withCement mortar 1:4 (1cement : 4 coarse sand) (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO\"S STORE)
314	188.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: 3 mm thick
315	189 Providing and applying waterproofing coating with waterproofing material [i.e. one coat of Dr. Fixit Raincoat Classic over a coat of Dr. Fixit Raincoat Universal Base Coat (Dr. Fixit Raincoat WPC) of Pidilite Industries Ltd. or two coats of Wall Shield 2K of Berger Paints India Ltd. or equivalent approved make as per the manufacturer\"s specification] including applying a coat of primer with Dr. Fixit Primeseal of Pidilite Industries Ltd. or Wall Shield 2K of Berger Paints India Ltd. or equivalent approved make on exterior wall surface of the building as per the manufacturer\"s specifications alongwith the surface preparation, sealing the cracks if any with Dr. Fixit Crack-X paste / Dr. Fixit Crack-X Shrinkfree of Pidilite Industries Ltd. or Advanced Latex Plus of Berger Paints India Ltd. or equivalent approved make, cost of all materials, labour, tools and tackles etc. complete as per the direction of Engineer-in-Charge.
316	190 Supply and fixing of sticker
317	191.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 45 x 70 mm
318	191.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 45 x 85 mm
319	191.3 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 50 x 100 mm
320	191.4 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 50 x 125 mm
321	191.5 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 65 x 100 mm
322	191.6 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 65 x 125 mm
323	191.7 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 65 x 150 mm
324	192.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick
325	192.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick
326	193.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick
327	193.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 25 mm thick
328	194.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimumensity of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick
329	195 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawingThe item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Renovation Of Transit House-1 At Nalco Township, Damanjodi, Damanjodi-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Renovation Of Transit House-1 At Nalco Township, Damanjodi, Damanjodi-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us