|
| 1 | Renovation of 18 Rooms of Guest House at VNIT,Nagpur. |
| 2 | Dismantlingbrickmasonryinlimeorcementmortarandstackingthematerilsas directed with all leads, lifts etc. |
| 3 | Removing floor tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 4 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete |
| 5 | Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. |
| 6 | Removing wooden or A.C. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete. |
| 7 | Providing and fixing mild steel grill work for windows, ventilators etc. 24 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 8 | Providingandlayinginpositionflooring oftelephoneblack/AmbaWhite/Catbary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. |
| 9 | Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished onbothsideandedgestooriginalincludingfixinginpositionincementmortor1:4 curing polish-ing, cleaning etc complete. |
| 10 | Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 11 | Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 12 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. |
| 13 | Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete. |
| 14 | Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. |
| 15 | Providing and fixing superior type Belgium mirrors of required size with frame / beading and required fixtures i.e struds etc. complete. |
| 16 | Providingand fixingC.P. pillar cock longneck with aerator of approed makeincludingnecessary sockets/union nut etc. complete. |
| 17 | Providing and fixing C.P.Two way BIB cock of approved make continentalincludingnecessary sockets/union nut etc. complete. |
| 18 | ProvidingandfixingC.P.Angularstopclockwithwallflangeofapprovedmakecontinentalincluding necessary sockets/union nut etc. complete. |
| 19 | Providing and fixing 15 mm diameter CP type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete |
| 20 | Providing and fixingTable top white wash basin of size 120x635x405mm rubber plugs andbrasschain,with pillarcock,C.P.Angularstopcocklongthread,continental includingS.S.bottletrapofapprovedmakehaving necessarypipeconnectionupto theoutside face of the wall.etc complete as directed by Engineer in charge. |
| 21 | ProvidingandfixinginpositionGypsum boardfalseceilingwith12.5mm thick Gypsumboards,screwed/fixed to the under structure of suspended G.I. Grid constructedand suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum centertocenterdistanceof600milimetreperimeterchanneland intermediate channels atmaximum center to center distance 1200 milimetre galvanizedgridshouldbefixedto reinforced cement concrete slab. The gypsum board shouldbefixedtogalvanizedirongridwithnecessaryscrews. Theboardsshouldbetaped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed inall respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. |
| 22 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 23 | Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. |
| 24 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 25 | Providing and fixing inposition (asper1868/1982) Alluminium sliding windowof three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeof bearingbottom40x18x1.25mmat weight 0.417Kilogram/One Running Metre. Inter locking section 40x 18x 1.10mm atweight0.469Kilogram/Runningmetre.andhandleandtopsection40x18x1.25mm at weight o.417Kilogram/Runningmetre.Asperdetaileddrawingsandasdirected byEngineerinchargewithallnecessaryAluminiumsectionsfixturesandfastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmthickplainglassandaluminiummosquitonetshutterwith stainless steel jail with allrequiredscrewsandnutsetc,complete.Withcolour Anodising with box. |
| 26 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 27 | Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplated handlesonboth sides, and finishing with French Polish etc. complete. |
| 28 | ProvidingandFixing30MMthickBOTHSIDEPRELAMINATEDSOLIDPANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coatofmetelprimerof approvedmake andmanufacture. M.Sframe shall becovered withheatmouledPVC\"C\"channelmadefrom5mm(+/0.25)thick prelaminatedsheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and5 mm thick ,95mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the \" c \" channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x30mmPVCsheetbeadingoneithersideandjoinedtogetherwithsolventcement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3nos M.S.powder coatedbuthingesofsize100mmx25MMx2mmusing32mmlongsteel screws drilled suitable to pass through both the walls of the M.S tube. Other S.S. hardwares. |
| 29 | Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to605mm x590mm to 605mm of8to10mm thicknessandconfirming to IS. 15622-2006( groupBla) of approvedmake, shade andpatternforflooring inrequired positionlaidonabedof 1:4 cement mortar including neat cement float, filling joints,curingandclearing etc. complete. |
| 30 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete |
