|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Supplying and laying of stone soling hand packed tightly incl ramming watering and filling of interstices incl all carriage complete job |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) i/c Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 7 | 12 mm thick cement sand plaster in 1:6 mix complete job |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Centering and shuttering of kitply including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 10 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Rough chisel dressed |
| 11 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm) 16mm |
| 12 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 13 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). |
| 14 | Providing and fixing Acrylic letters (min.5mm thick) including SMPS lighting system RGYB color scheme complete job.(thickness/color scheme as per PDA approved theme & directions of engineer in charge) |
| 15 | Providing/supplying of CI park benches 3 seater inlcuding deodar seat (40MM) and necessary fittings complete job |
| 16 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of alljoints, corners, junctions of pipes and masonry with polymer mixedslurry |
| 17 | Carriage of material bajri /Bajriby mechanical means for an average lead of 40Km |
| 18 | Electric PartWiring for Circuit/Sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excluding cost of conduits. (Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent). 2x2.5 sq mm |
| 19 | Supply installation testing and commissioning of 20W Warm Focus light adjustable type with minimum system lumen efficacy of 100 lm/W,IP67,made of Pressure Die cast Aluminium fitted with clear glass and lenses, P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of (Philips/Mayfair MFPLL 915A) sample to be approved before installation. |
| 20 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 21 | Providing and laying in position cement concrete including curing but excluding the cost of shuttering and centring with 1:1.5:3 (1 cement, 1.5 Coarse sand, 3 Graded stone aggregate 20 mm nominal size). The dimensions of the block should be 2\"x1\"x1\" |
| 22 | Supply installation testing and commissioning of 12W/+ Warm LED Bollard Light with minimum system lumen efficacy of 100 lm/W,IP66/67, with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of two years,which includes replacement of fixtures (Mayfair MFBLLED 085 make) sample to be approved before installation.The Job also includes 4No. fasteners for each bollard. |
| 23 | Supply, installation, testing and commissioning of outdoor type warm LED strip light I, IP65 rating, 6W+/mtr ,50LED+/mtr,energy saving and LM80 tested.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of one year reckoned from the date of successful commissioning/ handing over of site to the intending department.Complete job. (Wipro/Havells/Phillips/Mayfair) |
| 24 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, , vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete., with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBS, sets of Aluminium Bus Bar of different rating. after taking Derating factor into account, and other allied accessories etc. as required. the panel to be fabricated from reputed firm duly approved by CPRI.as per approved design, size may vary as per site requirement) |
| 25 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.INCOMING:b)100 amp DP MCB (Legrand/ Shinider/L&T/ABB make). |
| 26 | b) 2 No. of Aluminium Bus Bar of 200 Amp. |
| 27 | digital time switch astronomical (GIC ASTRO) |
| 28 | 40/63A automatic modular contactor with manual override (Havells/L&T,Schnider) |
| 29 | OUTGOING:b)5-32 SPMCB |
| 30 | Supply, laying, connecting and commissioning of 16 sq mm 2 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for pathway poles, incl. cost of required al. thimbles duly crimped. (Over head/ under ground). |
| 31 | Supply and fixing of 25 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps/saddles etc for laying of wires, fixed with necessary clips and rowel plugs complete. |
| 32 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting the concrete path wherever required,jointing etc.direct in ground including excavation and refilling the trench with soft excavated earth making the surface level but excluding sand cushioning and protective covering etc., complete as required.25-40 mm dia |
| 33 | Mechanical PartRecirulation Pumps: Supplying, Installation and Testing & Commissioning of horizontal monoset Non Clog type submersible Pump Set with totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CI RPM : Lower side Capacity : 5 HP cummilative Three Phase or as per site requirement. Discharge : Suitable for 8 M Spillway.Head : As per site requirment.(One Duty + 01 Standby) |
| 34 | Makeup water Pumps: Supplying,installation,testing and commissioning of Open well submersible Pump with SS body coupled with totally enclosed water filled squirrel cage induction motor, water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation. Make : ReputedCapacity : 1.5 - HP Three PhaseIP Rating: IP68 |
| 35 | Providing, Installation, Testing and commissioning of Stainless steel Stainer fabricated out of 1.6mm thick stainless steel, grade 304 sheet with 3mm dia. Holes with stainless steel flange. 100mm dia./ 80 mm. |
| 36 | Providing, Installation, Testing and commissinong of Non Return Valve of Following sizes confirming to IS 5312, complete with rubber gasket,GI bolts, nuts, washer etc. as required. 100mm dia / 80 mm. |
| 37 | Supplying, fixing, Testing and Commissioning of Butterly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with Nuts,bolts, washer, gaskets confirming to IS 13095 of following sizes as required. 80mm dia / 80 mm dia. |
| 38 | Supplying and drawing following sizes of FRLS PVC insulated copper/Alumunium conductor cable in the existing surface/reccessed steel/PVC conduit as requiredA)3.5 Core X 4.0 Sq.mm Cu Cable. |
| 39 | B)3.5 Core X 10.0 Sq.mm Cu Cable. |
| 40 | SITC of 63 A Three Phase Control Panel including 63 A 4Pole MCCB, C/O Switch, Bus Bar copper, Voltmeters, Ammeters, Switch-gear. The panel shall be fabricated sheet metal 14 guage with powder coated out door type with rating IP67.The Outhgoing shall have 1.Outgoing Feeder for cummilative 5 Hp Pump with FASD Starter.2.Outgoing Feeder for cummilative 1.5 Hp Pump with DOL Starter.2.Auxillary Feeder (Blank) for furture.The Job also includes complete earthing of all equipment. |
| 41 | Providing earthing station with GI Earthing Plate (600mm x 600mm) 8 mm thick for pumps and MCC panels including excavation, CI manhole cover and frame complete as per specifications and IE rules. |
| 42 | Supply, installation, testing and commissioning of G.I. pipes as per requirement on the site of following sizes, including all necessary fittings, accessories, supports, hangers, clamps, etc., as required at site. The scope of work also includes demolition of existing concrete, removal of old pipes, and making good the surface after installation of new pipes, complete in all respects as per direction of Engineer-in-Charge.A)80 mm dia |
| 43 | B)25 mm dia |
| 44 | Excavating trenches of required width for cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 900 mm including getting out the excavated soil rubble soling, sand filling upto 3\" above the pipe/cable and then returning the soil as required in layers not exceeding 20 cms in depth including filling fine sand alround, consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, in all soils. Please Enable Macros to View BoQ information |
