|
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 2 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 4 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stoneaggregate 40 mm nominal size derived from natural sources) |
| 7 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 8 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement |
| 9 | 40 mm thick with 20 mm nominal size stone aggregate |
| 10 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 11 | G.S. Sheet |
| 12 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 13 | Electric resistance or induction butt welded tubes |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. |
| 15 | Two or more coats on new work |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 17 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 18 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : |
| 19 | Two or more coats on new work |
| 20 | 12 mm cement plaster of mix : |
| 21 | 1:4 (1 cement: 4 fine sand) |
| 22 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 23 | 1:4 (1 cement: 4 fine sand) |
| 24 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 25 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 Palverised sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick stone aggregate 40 mm nominal size, well rammed and consolidated and grouted with Pulverised sand including necessary excavation, levelling & dressing & finishing the top smooth. |
| 26 | Providing and laying Hollow cement concrete black walling 150 mm thick consisting of hollow block of size 400x150x200mm of mix 1:3:6 (1:cement:3 pulverised sand: 6 graded stone aggregates of 10 mm normal size) laid in cement martar 1:6(1cement: 6 sand). |
| 27 | Providing cement concrete surface drain with CC 1:3:6(1:cement, 3:sand, 6:graded Stone Aggregate 40 mm normal size), including earthwork in excavation, 10 cm thick bed concrete and 15 cm thickside walling, finishing with 12mm thich cement plaster 1:4 and a floating coast of neat cement on top sides and inside disposal of surplus earth etc complete. |
| 28 | 15 x 15cm Surface drain. |
| 29 | providing and Fixing in position eaves or facia board with precoated profile sheet 30cm wide including frame wherever necessary, all complete as directed by Engineer-in-charge. |
