Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | S&F in repairs 15mm bore long body bib tap cast copper cromium platedwith crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and directed. |
| 2 | S&F in repair 15 mm dia brass chromium plated Pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and directed. |
| 3 | S&F in repairs, 15mm bore angle valve chromium plated, fancy type complete all as specified and directed. |
| 4 | S & F in repair angle valve two way 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed . |
| 5 | S&F in repairs chromium plated brass shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 6 | S&F in repairs 15mm bore central hole wash hand basin and wall mixture for bath room and sink brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 7 | S&F in repair gun metal globe or gate valve with iron wheel head screwed both ends for 15 mm bore of pipe complete all as specified and directed. |
| 8 | S&F in repair gun metal globe or gate valve with iron wheel head screwed both ends for 20 mm bore pipe complete all as specified and directed. |
| 9 | S&F in repair Health faucet (CP Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position complete all as specified and directed. |
| 10 | S&F in repair toilet paper holder of of brass, chromium platedfixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 11 | S&F in repairs 32 mm dia CP Waste coupling of(half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed. |
| 12 | S&F in repairs 40 to 50 mm dia CP Waste coupling of(half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed. |
| 13 | S&F in repair 32/40 mm dia PVC waste pipe for WHB/Sinkof 90 cm long with union complete all as specified and directed. |
| 14 | Taking up or down 20mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal fromsite complete all as specified and directed. |
| 15 | Taking up or down 15mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal fromsite complete all as specified and directed. |
| 16 | S&F 20 mm bore GI pipe medium grade ISI marked with all fittings and fixed to walls/roofs or laid in floors complete all as specified and directed. |
| 17 | S&F 15 mm bore GI pipe medium grade ISI marked with all fittings and fixed to walls/roofs or laid in floors complete all as specified and directed. |
| 18 | Refixing 20 mm bore GI pipe any grade fixed to wall and ceiling including making the screws, threads as required with necessary new fittings such as elbows, tees, sockets etc and making good cutting holes etc with cement mortar (1:3) complete all as specified and directed. |
| 19 | Refixing 15 mm bore GI pipe any grade fixed to wall and ceiling including making the screws, threads as required with necessary new fittings such as elbows, tees, sockets etc and making good cutting holes etc with cement mortar (1:3) complete all as specified and directed. |
| 20 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm dia iron pipe and fixed (min wt 210 gram) complete all as specified and directed. |
| 21 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm dia iron pipe and fixed (min wt 142 gram) complete all as specified and directed. |
| 22 | S&F in repairs PVC connection 15 mm dia 450mm long with 2 Nos PVC check nuts with washer complete all as specified and directed. |
| 23 | S&F in repairsstainless steel plate rack made out of 1mm thick stainless steel of overall size900x600x250mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed. |
| 24 | S&F in repairs stainless steel sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes fittings; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 25 | S&F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes fittings; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 26 | S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets, waste pipe excluding taps, chain and plug and porcelain stopper butincluding cutting for and pinning in brackets complete all as specified and directed. |
| 27 | S&F in repair vitreous china water closet “Orissa pattern” of size 580 x 440mm pan with \"P\" or \"S\" trap front or back inlet, foot rests including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces incl L-bend flush pipe complete all as specified and directed. |
| 28 | S&F in repairs vitreous chinaware wash down water closet pan \"Pedestal pattern\" white including fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed. |
| 29 | S&F in repair vitreous china wash down water closet (Pedestal pattern) single piece EWC with PP soft close slim seat cover, hinges,dual flush cistern fitting, fixing accessories and accessories set size 360 x 705x 705 mm S trap -300 mm white including seat cover and making good to existing floor complete all as specified and directed. Make : Jaquar, CERA or equivalent |
| 30 | S&F in repair table top vitreous china wash hand basin white colour of size 550x400 mm fixed on granite slab including 32 mm dia CP waste coupling, Swan neck CP pillar tap and fittings etc complete all as specified and directed.Make : Jaquar, CERA or equivalent |
| 31 | S&F in repairs 10 ltrs capacity PVC low level flushing cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. |
| 32 | S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and aluminium hinging device complete all as specified and directed. |
| 33 | S&F in repair CP grating 100 mm dia round fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed. |
| 34 | S&F in repair brass chromium plated soap dish complete all as specified and directed. |
| 35 | S&Fin repair Towel Rail 600mm long of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed. |
| 36 | S&F in repair of 600 mm depth 6 mm thicklooking mirror mounted on board / aluminium frame and fixedwith CP screws and washers complete all as specified and directed . |
| 37 | S&F in repairs PVC cabinet with looking mirror ofand fixed in wall with CP brass screw and cup washer of Make:Prayag or equivalent as approved by GE complete all as specified and directed. |
| 38 | S&Fin repair corner glass shelf25cm radius with CP bracket and railing of approved quality complete all as specified and directed. |
| 39 | Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 250 to 500 Ltrs capacity of tanks complete all as specified and directed. (Note : Write date of cleaningand CA No on water tank) |
| 40 | All as per Item No.39 but capacity exceeding 500 litres but n.exc 1000 Ltrs complete all as specified and directed. |
| 41 | Dismantling of water tank exc 250 but n exc 500 ltr in capacity complete all as specified and directed. |
| 42 | Dismantling of water tank exc 500 but n exc 1000 ltr in capacity complete all as specified and directed. |
| 43 | S&F rotational moulded polyethylene water storage white tanks triple layered (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover GI nipple of required size complete all as specified and directed. |
| 44 | S&F rotational moulded polyethylene water storage white tanks triple layered (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover GI nipple of required size complete all as specified and directed. |
| 45 | S&F in repairs overhead tank cover of PVC for 500/1000 ltr tank complete all as specified and directed. |
| 46 | S&F in repair PVC (SWR) pipes of 110 mm nominal outside diameter single socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed. |
| 47 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor complete all as specified and directed. |
| 48 | S&F 110mm borePVC(SWR) bends any radius complete all as specified and directed. |
| 49 | S&F 75 mm bore PVC(SWR) bends any radius complete all as specified and directed. |
| 50 | M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 51 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 52 | S&F 3mm thick figured glass, pin headed type and glazing/fixing with silicon adhesive glue in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 53 | S&F 3mm thick sheet glass, ordinary quality and glazing/fixing with silicon adhesive glue in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 54 | S&F 4.80mm thick sheet glass, ordinary quality and glazing with aluminium clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 55 | S&F 25mm dia stainless steel Curtain rod with designer knob fancy type with stainless steel brackets complete all as specified and directed. |
| 56 | S&F in repair door closer hydraulically regulated (aluminium extruded body) designation No. 3 universal type suitable for door shutter of 851 to 1000mm width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 57 | S&F in repairs 300mm ordinary rat tail rod pattern springs incl roller and roller plate complete all as specified and directed. |
| 58 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm complete all as specified and directed . |
| 59 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each complete all as specified & directed. |
| 60 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 sqmbut n exc 4 sqm in each complete all as specified & directed. |
| 61 | Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each complete all as specified & directed. |
| 62 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed |
| 63 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 64 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 65 | S&F 30mm thick Flush shutters, soild core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 66 | M&L 30mm thick 2nd class hard wood Glazed skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and directed |
| 67 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge. |
| 68 | S&F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottomrails. M.S. frame shall covered with heat moulded plain colour PVC \"C\" channel having a PVCsheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings |
| 69 | S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified & directed. |
| 70 | S&F 100mm size stainless steel butt hinges medium weight cold rolled complete all as specified & directed. |
| 71 | S&F 125 mm long extruded aluminium alloy handle complete all as specified & directed. |
| 72 | S&F 150mm long extruded Aluminium alloy handle complete all as specified and directed. |
| 73 | S&F 150mm long Anodised Aluminium tower bolt complete all as specified and directed. |
| 74 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed. |
| 75 | S&F powder coated (Thickness of powder coating not less than 50 micron) aluminium frame and other sections for doors, windows, ventilators, partitions of any colour as approvedwith one or more rebates incl joining cleat for fixing etc complete all as specified & as directed. |
| 76 | S&F aluminium powder coated (coating of any colour and thickness of powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete all as specified & as directed. |
| 77 | S&F aluminium powder coated openable window made of thefollowing specifications :- (Note outer size of window shall be measured.Following items are included in this unit rate. (a)Aluminium frame all around of hollow section 125 mm x 44 mm x 1.60 mm thick. (b)Provn of glazed openable shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 4.80mm thick heat observingglass with suitable EPDM beading, handle and locking clips arrangement.(c)Provn of gauged openable shutter of size44 mm x 18 mm x 1.25 mmusing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable stainless screws beading, handle and locking clips arrangement. |
| 78 | S&F aluminium powder coated ventilators made of thefollowing specifications :- (Note external size of ventilator shall be measured.Following items are included in this unit rate. (a)Aluminium frame powder coated styles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick.(b)Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber).(c)Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips.(d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel. |
| 79 | Demolition ofBrick work built in cement mortar complete all as specified and directed. |
| 80 | M&L for bricks work with sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 complete all as specified and directed. |
| 81 | M&L forbrick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick wall built in cm 1:6 complete all as specified and directed. |
| 82 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 83 | M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed. |
| 84 | M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) by using scaffolding upto15m height, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 85 | M&L for Rough cast plaster on exterior wallsapplying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even.The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed by Engineer in Charge. |
| 86 | M&L forapplying two coats of oil bound distemper on new plastered surfaces on wallincluding necessary preparation of wall surfaces complete all as specified and directed. |
| 87 | M&L for applying two coats of cement base paint on walls surface including necessary preparation of wall surfaces complete all as specified and directed. |
| 88 | M&L for applying two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed. |
| 89 | M&L preparation of newly steel and iron surfaces of any description over 10 cm in width or girthand applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 90 | M&L for applying two coats of synthetic enamel paint on new kerb stone surfacesover a coat of primer including preparation of kerb stone surfaces exc 10 cm width or girth, complete all as specified and directed. |
| 91 | M&L for applying two coats of synthetic enamel paint on old kerb stone surfacesincluding preparation of kerb stone surfaces exc 10 cm width or girth, complete all as specified and directed. |
| 92 | M & L for complete removal of existing treatment on wallsand preparation of surfaces of walls and applyingtwo coatsof oil bound distemper (OBD)over a coat of 1 mm thick birla care putty complete all as specified and directed. |
| 93 | M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 94 | M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girthand applying one coat of synthetic enamel paint complete all as specified and directed. |
| 95 | M&L preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed. |
| 96 | M&L for preparation of old painted surfaces applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives complete all as specified and directed. |
| 97 | Dismantling of Stone slabs and tiles laid dry of any description or thickness in floors, aprons, complete all as specified and directed. |
| 98 | M&L for Chequered Pre-polished cement concrete tiles Squared/rectangle 20 to 22 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry asin floorsover and including cement screed bedding 15mm thick in cement mortar (1:6) complete all as specified and directed. |
| 99 | M&L for 15-20mm thick granite slab of any colour and shade (table rubbed and polished) including pointing in white cement (1:2) using marble dust, of superior quality set andjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15 mm thick screed bed in cement mortar 1:4, cutting the edges in bullnosed shaped and polishing of any description or thickness including dismsntling old stone slab complete all as specified and as directed. |
| 100 | M&L for factory made machine pressed precast concrete interlocking paver block coloured glossy finished of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-30 grade with grey cement and no pigment over and including 25mm thick sand cusion complete all as specified and directed. |
| 101 | M&L for machine cut Kota stone slab flooring 20 - 25 mm thick over 20mm thick screed bed or bedding layer in CM 1:4and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl dismantling old stone slab, complete all as specified and directed. |
| 102 | All as per srl item No 101 above but as in skirting, dado or as in vertical surface etc. over 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed. |
| 103 | M&L for Cement concrete 1:2:4type B-1 (using20mm gradedcrushed stoneaggregate) in benching, coping etc including weathering slightly rounded or chamfered angles includingnecessary form work andcomplete all as specified & directed. |
| 104 | Demolition of PCC in ground floor and paving n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 105 | M&L 75 mm thickPCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed. |
| 106 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm gradedstone aggregate) in footpath / plinth protections, finished even and smooth without using extra cement incl necessary form work complete all as specified and directed. |
| 107 | M&L for providingand laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 108 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 109 | M & L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 110 | M&L for glazed ceramic coloured tiles in vertical surface 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick rendering in CM (1:4), complete all as specified and directed. |
| 111 | M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified |
| 112 | All as per srl item No 111 above but as in skirting, dado or as in vertical surface etc. over 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed. |
| 113 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified. |
| 114 | All as per srl item No 113 above but as in skirting, dado or as in vertical surface etc. over 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed. |
| 115 | M&L for cutting channels, grooves or rebates n exc 15cm girth, and making good in cement mortar 1:4 to match existing surfaces complete all as specified and directed. |
| 116 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge. |
| 117 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw / \"J\" hooks all as specified and directed. |
| 118 | S&FPre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge,roof covering/ cladding to wall, fixed with self tapping screw / \"J\" hooks all as specified and directed. |
| 119 | Dismantling of old app membrane on roof surfaces including screed bed and removal of debris upto 1.0 Km from site etc complete all as specified and directed. |
| 120 | M&L 10mm thick rendering in CM 1:4 with water proofing compound @ 3% of weight of cement over concrete surface (WPC will be measured and paid seperately), surface finished even and smooth etc complete all as specified and directed. |
| 121 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of25 mm as leveling course, laid and compacted in min slope 1:30 over roof incl necessary form work etc complete all as specified and directed. |
| 122 | S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm) . It shall be laid by torch application, side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming to IS:3384@ 0.40kg/sqm complete all as specified and directed. |
| 123 | M&L two coat of heat reflective silver Aluminium paint over APP membrane complete all as specified and as directed by the Engineer-in-charge |
| 124 | Supply only water profing compound complete all as specified and directed. |
| 125 | Treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (c) Top of the sunken floor slabs shall be laid to a slope 1:40. Thesurface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Coved fillet in PCC (1:2:4) type B0 of radius 75 mm shall be providedat the junctions of RCC slab and adjoining walls.(d) Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight ofcement. Over plastered surfaces, a layer of APP based polymeric membrane not less than 3mmthick, weighing not less than 3 kg per sqm, reinforced withpolyster non- wovenfabric (weighing not less than 150 gm per square metre) shall be laid by torchapplicationover hot blown betumen primer 85/25. Side overlaps shall be 100mm and the ends laps shallbe 150mm andoverlap joints shall also be sealed by torch application. (e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes /joints and slabs / walls by filling water for 72 hours. The sunken portion ofNahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks. (f) 32 mm dia GI spout shall be provided to drain out leakage, if any. Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The Cost of testingis inclued in the rates quoted above. |
| 126 | Repair of existing steel rolling shutters with/withoutgear operated type of size not exc 30 Sqm with all connecting items and repair / replace the lath of steel shutters and locking arrangements, greasing, tighting of helical wire spring along with the guide rail including welding wherever required, oiling etc complete and make in serviceable condition of shutter complete allm as specified and directed |
| 127 | S&F in repair Steel rolling shutters 1.25mm thick laths, withgear operated type with chain wheel and hand chain, anchoring rod, hasp and staple, spring, ball bearing, locking arrgements and one shop coat of red oxide primer; erected in position as indicated, complete all as specified and directed. |
| 128 | &F factory madekitchen cabinetof size 1.5M x 0.60M x 0.3M,made out of 18mm thick PVC celuka sheet having density not less than 650kg/cum one side decorative lamination & other side balancing lamination sheet consisting of carcase 18 mm thick PVC sheetincluding shutters made out of 18 mm thick PVC boardall required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screwswhere every required. All edge shall be covered with 2mm thick edge bonding tape or 90 degreeedge bent finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-ChargeNote : (i)PVC celuka sheet manufactured by an ISO 9001-2015 certified company, termite proof, water proof & flame retardant PVC sheet.(ii) PVC cabinet of required size fabricated by joining four 18mm thick PVC celuka ply fixed with each other using solvent cement adhesive and screws and 18mm thick PVC sheet as backing of cabinet screw and solvent cement adhesive etc(iii) The Cabinet box will be divided into twoequal part with two leafshutter and one shelf will be placed in cabinate(iii) Cabinate will be fixed in wall with4xfasteners etc and necessary fixing lugs (iv) Each shutter will be provided with SShandle 75 mm, CP Piano hinges, magnet/catcher(v)The quoted ratesare included the rates of all fittings and fixturs |
| 129 | M & L for writing letters or figures (Block, Roman, Italic or Indian) n. exc 30 cm height with synthetic enamel paint complete all as specified and as directed by Engr- in - Charge. |
| 130 | Dismantling wall and any type of ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness fixed to any type of frame including cover fillets complete all as specified and directed. |
| 131 | M&L for suspendedfalse ceiling system using 6 mm thick\"E\" Board ceiling tiles classic/ designer as approved by GE of size 595 x 595mm (as approved by GE) fixed with and including galvanized iron powder coated GI Grid system suspendedfrom ceiling with provision of galvanized wire 4 mm dia with butterfly clips and wall taping screw, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions complete all as specified and directed.(a)Size of grid - 600 x 600 mm.(b)Size of main Tee – 39 x 24 (c)Size of cross Tee – 29X34(d)Size of wall angle – 22.20 x 22.20 |
| 132 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 133 | S&F solid PVC wall lining consisting of 5mm thick wood grainprinted PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed. |
| 134 | Taking down carefully copper/aluminium point wiring of any size (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately),and making good disturbed surfaces of walls, floors etc to match with existing surfaces. |
| 135 | Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces. |
| 136 | Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces |
| 137 | Taking down carefully byunscrewing from boards /outlet boxes fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, building security lights with brackets, ceiling fittigs 2x2 LED, bulk head fittings, tube light any Type, Bed Side Lights, Modular Switch Sockets, Modular Sheet Metal Flush Boxes, Fan Regulators any Type etc complete all as specified and directed by Eng-in-charge |
| 138 | M&L for concealed Point wiring in repair for One Light point controlled by one, one way switch with two single core PVC insulate, unsheathed multistranded copper conductorcable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit20 mm dia concealed on wall/ceiling/floorincluding PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws tith washer complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering andpaintingto match with the existing colour. |
| 139 | All as per srl item No 138.00 but for One 3 pinswitch socket outlet, 5 Ampon the same board with other switches. |
| 140 | All as per srl item No 138.00 but for One 3 pin 5 amps switch socket outlet pointon independent board. |
| 141 | All as per srl item No 138.00 but for One bell/buzzer point controlled by one bell push. |
| 142 | All as per srl item No 138.00 but for Two way point controlled by two way switch. |
| 143 | All as per srl item No 138.00 but for One ceiling/exhaust fan point controlled by one switch and regulator |
| 144 | All as per srl item No 138.00 but for wiring with 4.0 sq.mm multistranded cable and earth wire with copper conductor of size 4.0 sq.mm for 15 amps power/geyser point. |
| 145 | Material and labour for point wiring for One Light point controlled by one, one way switch controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC Casing & Capping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated in existing/New wooden terminal box for mounting fittings like switches, sockets, regulators etc with and including new 3 mm thick phenolic laminated sheet top cover, fixed on top of terminal box complete, all as specified & directed. |
| 146 | All as per srl item No 145.00 but for One ceiling/exhaust fan point controlled by one switch and regulator |
| 147 | All as per srl item No 145.00 but for One 3 pinswitch socket outlet, 5 Ampon the same board with other switches. |
| 148 | All as per srl item No 145.00 but for One 3 pin 5 amps switch socket outlet pointon independent board. |
| 149 | All as per srl item No 145.00 but for One bell/buzzer point controlled by one bell push. |
| 150 | All as per srl item No 145.00 but for Two way point controlled by two way switch. |
| 151 | All as per srl item No 145.00 but for wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point. |
| 152 | M&L for concealed Point wiring for One Light point controlled by one, one way switch with single core PVC insulated, unsheathed multistranded copper conductorcable of size 1.5 sq.mm (FRLS) drawn in existing conduit /Existing Casing Caping including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washerc complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering andpaintingto match with the existing colour. |
| 153 | All as per srl item No 152.00 but for One ceiling/exhaust fan point controlled by one switch and regulator |
| 154 | All as per srl item No 152.00 but for One 3 pinswitch socket outlet, 5 Ampon the same board with other switches. |
| 155 | All as per srl item No 152.00 but for One 3 pin 5 amps switch socket outlet pointon independent board. |
| 156 | All as per srl item No 152.00 but for One bell/buzzer point controlled by one bell push. |
| 157 | All as per srl item No 152.00 but for Two way point controlled by two way switch. |
| 158 | All as per srl item No 152.00 but for wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point. |
| 159 | S&F in repair Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge. |
| 160 | S&F in repair Piano type switch single pole 2 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge. |
| 161 | S&F in repair Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge. |
| 162 | S&F in repair Ding Dong Bell along with bell push flush type 5 amps complete all as specified and directed by Engr-in-Charge. |
| 163 | S&F in repair socket two in one 6/5 Pin 5 Amps230 volt AC supply complete all as specified and directed by Engr-in-Charge. |
| 164 | S&F in repair socket two in one 6/5 Pin 15/16 Amps230 volt AC supply complete all as specified and directed by Engr-in-Charge. |
| 165 | Supply and fix in repair Switch socket combination 2 in 1, 5 A, 3 Pin flush type inc taking down old onecomplete all as specified and as directed. |
| 166 | Supply and fix in repair Switch socket combination 5A/16A, 5 in 1 inc taking down old one complete all as specified and as directed. |
| 167 | Supply and fix in repair Switch socket combination 2 in 1, 5 A, 3 Pin with Modular box, flush type inc taking down old onecomplete all as specified and as directed. |
| 168 | Supply and fix in repair Switch socket combination 5A/16A, 5 in 1 with Modular box type inc taking down old one complete all as specified and as directed. |
| 169 | S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed by Engr in charge. |
| 170 | Supply and fixing in repair Modular switch, one way 6 Amp, 1 module, piano type, 230/250 volts grade on top covers (catered in point wiring above) complete all as specified and directed. |
| 171 | All as per srl item no 170.00 but for Modular switch, two way 6 Amp, 1 module |
| 172 | All as per srl item no 170.00 but for Modular switch, one way 16 Amp, 1 module |
| 173 | All as per srl item no 170.00 but for Modular bell push 6 Amp, 1 module |
| 174 | Supply and fix in repair Modular socket outlet 2in1, 3pin 5A, 2 module, multipurpose use, flush mounting type, 230/250 Volts grade on Top covers (catered in point wiring above) complete all as specified and directed. |
| 175 | All as per srl item No 174.00 but for Modular socket outlet 2in1, 3 pin 15 Amps flush type |
| 176 | S&F in repair PVC whitecover plate with frame2 Module etc complete all as specified & directed. |
| 177 | S&F in repair PVC whitecover plate with frame3 Module etc complete all as specified & directed. |
| 178 | S&F in repair PVC whitecover plate with frame4 Module etc complete all as specified & directed. |
| 179 | S&F in repair PVC whitecover plate with frame6 Module. etc complete all as specified & directed. |
| 180 | S&F in repair PVC whitecover plate with frame8 Module etc complete all as specified & directed. |
| 181 | S&F in repair modular metal flush box 2 Module etc complete all as specified & directed. |
| 182 | S&F in repair modular metal flush box 3 Module etc complete all as specified & directed. |
| 183 | S&F in repair modular metal flush box 4 Module etc complete all as specified & directed. |
| 184 | S&F in repair modular metal flush box 6 Module. etc complete all as specified & directed. |
| 185 | S&F in repair modular metal flush box 8 Module etc complete all as specified & directed. |
| 186 | S & F in repair modular fan regulator, 120W-2Module complete all as specified and directed by Engr in charge. |
| 187 | Supply and fix in repair ceiling rose surface bakelite two to three terminals/plate, polycarbonate, isolated body. |
| 188 | Supply and fixing 2nd class hard wood rectangular block open recessed of size 45cmx30cmx5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos),for DB complete all as specified & directed. |
| 189 | Supply and fixing 2nd class hard wood rectangular block open recessed of size 30cmx25cmx5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos), for DB complete all as specified & directed. |
| 190 | Supply and fixing in repair lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified. Make- Havells,Philips,Bajaj |
| 191 | Supply and fixing in repair decorative ultra slim,elegant and sleek designed LED T5 batten lighting fixture with extruded aluminium housing with frosted diffuser environment friendly energy efficient sutiable for 20 watt LED tube lightwith 125 lumen per watt complete all as specified and directed . |
| 192 | supply and fix in repair LED batten (1.2m) made of CRCA sheet housing with a PC glossy diffiuser duly prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver .it has a rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 K CRI>80, THD<10 and PF>0.95 complete all as specified and directed. Make-Philips Cat Part No. BN308C LED20S-6500 L120 PSU WH, Crompton Cat Part CIS-305-40-57-SL-DP-NWH, Havells Cat Part STOUTPLUS600BS20WLED840SPCWH |
| 193 | Removing and refixing decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed. |
| 194 | Supply and fixing in repair LED 30 Watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixtures in white finish suitable for low ceiling height, 3 in 1, 3K, 4K, 6K with & including LED prewired and connecting up dismantling of old unsv recessed mounted light complete all as specified and directed. Make- Havells, Philips, Bajaj |
| 195 | Supply and fixing in repair surface LED luminaries 1x20 watt , 230 volts , 50Hz and new E-LITE LED TRIYCA batten a color changing LED batten and should have a minimum tempereture 6500K all in one fixtures, aal as specified and directed by Engr-in-Charge. Make- Havells, Philips, Bajaj |
| 196 | S&F in repair LED type security-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed by Engr-In-Charge. MAKE- Havells, Philips, Bajaj |
| 197 | S&F in repair 3 Watt metal and synthetic LED bedside flexible light warm white with diamension 5.5cm x 5.5cm x 14.6cm with one year manufacturer warranty. Make : Philips Cat Part No 48042 Havells and Bajaj |
| 198 | S&F in repair 20 Watt motion sensor batten (aluminium housing) for corridors based on auto dimming/ brightness option by motion sensor via in buildt sensor for efficient use of energy.Make : Havells Cat Part No LUNILINESMART20W LED865PCWH or Philips /Bajaj |
| 199 | S&F in repair inverter LED batten 20 Watt (PC body) with opal diffuser, IP-20 and inbuilt battery backup with powerful lithium battery.LED batten shall have atleast four hours backup with minimum two years warranty.The batten shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours complete all as specified and directed.Make : Philips / Havells / Bajaj |
| 200 | S&F in repair 10 Watt emergency LED inverter bulb B-22 capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty.The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours.Make : Philips /Havells /Bajaj |
| 201 | S&F in repair 20 Watt emergency LED inverter bulb B-22 capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty.The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours complete all as specified and directed.Make- Havells, Philips, Bajaj |
| 202 | Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LEDbatten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- relatedcolour temperature (CCT) of 6500K,>100Lm/Wattcomplete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make- Havells, Philips, Bajaj |
| 203 | Supply & fix in repair surface mounted bulk head LED light fitting including 10 watt LED lamp B22 base complete with all accessories and connection complete all as specified and as directed. Make- Havells, Philips, Bajaj |
| 204 | Supply & fix in repair recess type, 36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- relatedcolour temperature (CCT) of 6500K, warm white/ cool white/natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make- Havells, Philips, Bajaj |
| 205 | Supply & fix in repair recess type, 36 watt LED panel light Sky Type (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- relatedcolour temperature (CCT) of 6500K, warm white/ cool white/natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make- Havells, Philips, Bajaj |
| 206 | Supply and fixing in repair LED light fitting as building security lights of 35 Watt Cap 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover,incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-In-Charge |
| 207 | Supply and fix in repair sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door complete all as specified and directed. |
| 208 | Supply and fixing in repair SP 6-32 Amp, 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-In-Charge |
| 209 | All as per srl item No 208.00 but for SPN 40-63 Amp |
| 210 | Supply and fix in repair VerticalDB 4 way suitable for Double Pole outgoing MCB-40 Amp-04 Nos with incoming 100 Amps MCCB 4 pole-01 Nos complete with 250 Amps rated Copper busbar flush mounting, double door, proction class IP-30, IK08 complete all as specified and directed |
| 211 | Supply and fixing in repair MCB 10 to 32 Amps, single pole & neutral, 240 Volts complete all as specified and directed. MAKE- Havels, Philips, Bajaj |
| 212 | Supply and fixing in repair MCB 63 Amps, triple pole & neutral, 415 volts complete all as specified and directed. MAKE- Havels, Philips, Bajaj |
| 213 | Supply and fix in repair MCCB 100 Amps, 4 pole, 16 KA thermal and magnetic release in V TPN DB complete all as specified and directed. |
| 214 | Supply and fixing in repair PVC Blanking Plates one way with internal lock complete all as specified and directed. |
| 215 | Material & Labour for Sub Main Wiring in repair with two run single core 4 Sqmm PVC insulated unsheathed(FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 2.5 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge.NOTE-two run of 4 sq.mm & One run of 2.5 sq.mm & One run of PVC conduit with accessories shall be measured as One length complete all as specified and directed. |
| 216 | Material & Labour for Sub Main Wiring in repair with two run single core 6 Sqmm PVC insulated unsheathed(FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge.NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length complete all as specified and directed. |
| 217 | Supply and fixing in repair1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overll PVC sheathed weather proof service connections one twin core cable flat or circular of aluminium, conductors size 10 Sqmm, stranded conductors complete all as specified and directed. |
| 218 | Identifying and rectifyingthe defects pertaining to internal electrification of any type and nature such as taking down defective switch/socket/ceiling rose/holders/fittings / fixtures any type, rectification of faulty electric circuits,tightening of loose connections, replacment of old u/s wiring/conduits/casing caping & connections etc, complete all as specified and directed. |
| 219 | Identifying/detecting defects in unserviceable wiring and rectifyingthe defects pertaining to internal electrification of any type and nature such as taking down defective MCBs SP /SPN/DPs/TPN any type, rectification of faulty due to loose connection in electric circuits,tightening of loose connections, replacement of U/S MCBs, U/S portion of conductor etc, complete all as specified and directed.NOTE FOR ITEM NO 224.00 to 225.00 :-(a)All T & P/Stationeries and labour team required comprising of twoNos of trained electricians & helpers will be provided by the contractor daily, as directed.(b) Repof the contractor will present in complaint cell & responsible for receiving & attending the complaints from 0900 Hrs to 1700 Hrs at the time of lodging the complaint. In absence of rep of Contractor penal recovery as decided by GE shall be imposed & on contractor.(c) Cost of minor stores such as screws,clamps,insulation tapes,nuts/bolts, nail of required size etc shall be deemed included in the above quoted rate. However, major items such as switches, sockets, bell push, fan regulator, air conditioning condensers and sensors etc shall be measured and paid separately under appropriate items of Schedule \"A\".(d) Complaints where complete replacement of circuit/point wiring required shall be measured under relevent item.(e) If contractor fails to rectify the complaint with in 24 hours after receiving, Rs 500/- per complaint will be penalised. |
| 220 | M & L for Earthing in repair complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick burried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron all as shown in electrical plate No 5 of SSR Part-I, connected to transformer / feeder pillar all as specified including GI pipe 20 mm bore medium grade for watering and 15 mm GI Pipe light grade for protection of earth lead wire, PCC chamber using PCC 1:3:6 type C-2 CI frame and cover, funnel and wiremesh, all excavation and earth work etc complete all as specified and directed by Engr-in-Charge |
| 221 | Material and labour for renewal of Earthing complete with GI earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit should not less than 4 mtr deep below normal ground level ) with top edge of the plate not less than 2.95 mtr deep below normal ground connected to and included earth lead wire of dia 4 mmby means ofbolts nuts check nuts and washer returning and filling the pits with excaviated vsoil mixing with charcoal 250 kg, crystal salt 200 kg ,magnisiun sulphate of 100 kg and vegitable soil all around the plate up to 350 mm above from top edge of plate and balence portion filling with excaviated soil in layers not exc 25 mm thick 25 mm bore galvanised iron medium grade watering pipe up to top of plate 50mm bore galvanised iron light grade pipe for earth strip protection including all excavation earth work in any type of soil pcc 1;3;6 type c1 ....for chamber of internal size 300mmx 300mmx300mm with 120mm thick wall and 700mmx700mmx150mm thick bed concreat RCC 1:2:4 ,type b1 for precast chamber cover 50mm thick reinforced with welded steel wire fabric orxPM jali (weight not less than 4.00 kg/sqmm), funnel with wire mesh complete all as specied and directed. Note (i) Quoted rate shall be deemed to include for earth strip with protection pipe up to 7.5 M length |
| 222 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric poer cable (heavy duty) 1100 conductor of size 25 Sq mm 4.0 Core complete all as specified and as directed by Engr-In-Charge. |
| 223 | Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m deep in soft/loose soil for foundation/ cable etc n exc 10 Sqm on plan and n exc 1.5 Sqm in depth all as specified and directed by Engr-in-Charge |
| 224 | Returning, filling in including spreading levelling, watering and well ramming in layer n. exc 25 cm thick complete all as specified and directed |
| 225 | Removing surplus soil to a distance n. exc 50 m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and directed |
| 226 | Supply and spreading, levelling river sand in trenches for cables cushioning on top and bottom of cable complete all as specified and directed. |
| 227 | M&L brick protection with sub class\"B\" brick laid flat across the cable complete all as specified and directed |
| 228 | M&L for boring under roads for crossing of UG Cables complete all as specified and directed. |
| 229 | Supply and fix GI Pipe light grade of size 40 mmlaid in trenches under road/fixed on wall/pole for cable protection complete all as specified and directed by Engr-In-Charge |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
