Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish ofthe permishes .complete all as specified and directed. |
| 2 | M&L for Vitrified Ceramic tiles in all colours and shade 10 mm thick ultracharged (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Incl screed bed 15 mm thick in CM (1:4) complete all as specified and directed. |
| 3 | M&L for Vitrified Ceramic tiles in all colours and shade 10 mm thick ultracharged (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as skirting dado or riser of steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tile over 10 mm thick rendering CM 1:4complete all as specified and directed. |
| 4 | M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick in all colours and shade tile (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floorsetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Incl screed bed 15 mm thick in CM (1:4) complete all as specified and directed. |
| 5 | M&L for coloured glazed ceremic wall tiles in vertical surfaces of size450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement mortar 1:4.complete all as specified and directed. |
| 6 | M&L for18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 7 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 8 | M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 9 | M&L for Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 10 | Demolition ofBrickwork or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed. |
| 11 | M&L for Brickwork with subclass ‘B’ bricks (old size), straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 12 | Taking down cement plaster on brick wall or concrete surfaces including racking out joints hacking for key, scrubing down and wash with water etc complete all as specified and directed. |
| 13 | M&L for 10mm thick renderingon fair faces of brick or concrete surfaces on internal wall in cement mortar 1:6finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for 5mm thick renderingon fair faces of brick or concrete surfaces on ceiling in cement mortar 1:3finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for 15 mm Rough cast plaster on fair faces of Brick or Concrete surfaces on internal/external in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | Supply only Water proofing compound complete all as specified and directed. |
| 17 | M&L for preparation of new plaster surface for two coats distempering walls with dispemper oil emulsion including chalk whiting, on plastered surfaces, preparatory to distempering over white wall careputty of average thickness 1-2 mm on wall over the plastered wall surface to prepare the surface even and smooth complete on wall. Complete all as specified and as directed. |
| 18 | M&L for preparation of new plaster surface two coats distempering walls with dispemper oil emulsion including chalk whiting, on plastered surfaces, preparatory to distemperingto prepare the surface even and smooth complete on ceiling. Complete all as specified and as directed. |
| 19 | M&L for Complete removal of existing treatment distempered and painted surfaces and applying two coats ofdistempering walls with dispemper oil emulsion including 1 mm thick putty on wall. Complete all as specified and as directed. |
| 20 | M&L for Complete removal of existing treatment distempered and painted surfaces and applying two coats ofdistempering walls with dispemper oil emulsion on ceiling. Complete all as specified and as directed. |
| 21 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). Complete all as specifed and directed. |
| 22 | M&L for preparation of old plaster surface finishing walls with two coats Acrylic Smooth exterior paint of required shade.old work (Two coat applied @ 1.67 ltr/10 sqm ). Complete all as specifed and directed. |
| 23 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exceed 1.5 Sqm and not exceed 4.00 sqm each complete all as specified and directed. |
| 24 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exceed. 1.5 sq. m each complete all as specified and directed. |
| 25 | S&F of Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed. |
| 26 | S&F of 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 27 | S&F 30mm thick flush shutters, solid core construction, with block board care and both face covered with decorative face veneer with lipping/ frame to match complete all as specified and as directed. |
| 28 | S&F of factory made solid PVC chowkhats or frames of size 50mmX47mm made out of5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and as directed. |
| 29 | S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottomrails.M.S frame shall be covered with heat moulded plain colour PVCC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitablePVC sheet beading and jointed together with solvent cement complete all as specified and as directed. |
| 30 | S&F in repairs 100mm size mortice locks of brass body, 4 levers suitable to aluminium door shutters complete all as specified and directed. |
| 31 | S&F of 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 32 | S&F of 150 mm long brass tower bolt, type 2 and fixed with necessary screws etc complete all as specified and directed. |
| 33 | S&F of 125 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed. |
| 34 | S&F of 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 35 | S&F of 150 mmlong Aluminium handles, cast type, anodised complete all as specified and directed. |
| 36 | M&L for cement concrete TypeB0 1:2:4 (12.5 mm graded aggregate) for hold fast hold fast, lacing course coping, bed blocks etc complete all as specified and directed |
| 37 | Dismantling existing wall/ceiling board, Partition any type including wooden framed work/GI frame work of any size & specifications complete all as specified and directed. |
| 38 | Design supply & installation of suspended Spider Glazing systemdesigned to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc.complete all as specified and directed. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.Note:All parts required to complete satisfaction of Engineer-in-Charge shall be included as per Engineering practice, no extra charges given to contractor. |
| 39 | Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG(glass reinforced gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.Note:All parts required to complete satisfaction of Engineer-in-Charge shall be included as per Engineering practice, no extra charges given to contractor. |
| 40 | S&F PVC wall Lining/panelling consisting of 5mm thick hollow type, single side prelam PVC sheet used instead of plain colour sheet fix to wall with screws incl matching PVC beading complete all as specified and directed. |
| 41 | S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 42 | S&F of Powder coated to (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 43 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom andsideswithrequiredEPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed. |
| 44 | S&F of 5.5 mm sheet glass, ordinary quality and glazing with oil putty/rubber beads in square exc 0.5 sq. m in each pan complete all as specified and directed. |
| 45 | M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to aluminiumframework complete all as specified and directed. |
| 46 | S&F of 200 mm Aluminium anodised, barrel tower bolts of extrudedsection and fixed complete all as specified and directed. |
| 47 | S&F of 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 48 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 49 | S&F of 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 50 | S&F of100mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed. |
| 51 | S&F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 52 | Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangment and making necessary holes including door stopper , ss handle15mm dia450 mm long both sides(two handle each side) etc. for fixing requireddoor fittings complete all as specified and directed. |
| 53 | Providing and fixing in repairs venetian blinds, sheer demout zebra blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and directed. |
| 54 | Demoliton of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed. |
| 55 | Demolition for mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof complete all as specified and directed. |
| 56 | Demolition of Cement concrete (unreinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 57 | M&L for M-25 Ready Mix Concrete (low density thermal insulative concrete of density 1200 kg/cum) obtained from plant approved with MES as in roofs, terraces, sunken and other locations as per site requirements laid through RMC with suitable arrangements of pumping etc complete all as specified and directed. |
| 58 | Material and labour for Cleaning (by use of wire brush, broom and high pressure jet) and preparation of roof/wall (RCC/BRICK/tiles/Cement concrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion/ contraction and repairing the cracks on the surface caused by thermal machine, filled with Repair Mortar/General purpose Grout in the proportions as recommended by manufacturer, supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (a)Elongation of range 400% to 600%. (b) Tensile strengthof 8-12N/mm2. (c)Crack bridging ability of 3.00-4.00mm. (d) Hardnes (Shore \"A\" ASTM D2240) of range 50-70.The application shall include final base preparation, epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. Theapplication/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer.A sample has to be prepared by applicator before starting of work on ground and this sample to be approved by GE. Make- SIKA/FOSROC/AsianPaints/Berger.Note:- The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) freeFrom leakage/seepagefor a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose.(b) Contractor has to bring entire quantatity (as per manufacturer instruction for coverage area per unit of material) of water proofing material in one go and to be deposited in MES store. MES JE will issue material for use at site on daily basis and all empty cane shall be kept in MES store untill entire work of water proofing is completed as per CA.(c) Contractor shall submit original purchase voucher as soon as material arrived at site, for verification of required quantity of material as per manufacturers instruction. |
| 59 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm inclr 50 mmincluding waste fittings, brass, chromium plated for glazed ware sinks etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 60 | Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 61 | Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 62 | S&F of 15 mm bore GI tubing medium grade to walls, ceiling or laid in floors including concealed complete all as specified and directed. |
| 63 | S&F of20 mm bore GI tubing medium grade to walls, ceiling or laid in floors including concealed complete all as specified and directed. |
| 64 | S&F in repair PVC valveless, syphonic action type, flushing cistern 10 Ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe complete all as specified and directed. |
| 65 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white seat cover (including 6 mm dia 50 mm longfixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) including all fixture complete all as specified and directed. |
| 66 | S&F in repair of CP Health faucet heavy duty chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and CP wall hook including making connections and fixed in position complete all as specified and directed. |
| 67 | S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 68 | S&F in repair soap dish any type fixed to plug with chromium plated brass screws complete all as specified and directed. |
| 69 | S&F in repair of Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed. |
| 70 | S&F in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 71 | S&F in repairviterous china top counter oval wash basin 630x450 mm including with 32 mm brass waste, 32 mm brass waste bottle trap and 15 mm CP pillar tapswan neck type of 15mm diaand pipe to wall with CP brass wall flangeand rubber adopter for water connection, CI/MS bracket with painting including cutting and making goodthe walls after taking down old one where required complete all as specified and directed. |
| 72 | S&F in repairBattery based infrared sensor operated white Vitreous Urinal of aprox.size 610x390x370 mm icluding all fitting and fixtures complete all as specified and directed. |
| 73 | S&F in repair ofurinal glass 10 to 12mm thick partition wall 900x450x350mm design approved by Engr-in Charge complete all as specified and directed. |
| 74 | S&F of PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 75 | S & F in repair 15 mm chromium plated bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 76 | S & F in repair 15mm bore cromium platedfancy type angle valves,screwed down, high pressure, with crutch or butterfly handle, chromium plated with long shank and cup (concealed type) complete all as specified and directed. |
| 77 | S & F 15mm bore cromium platedfancy type angle valves two-in-one,screwed down high pressure, with crutch or butterfly handle, chromium plated with long shank and cup (concealed type) complete all as specified and directed. |
| 78 | S&Fofmirror of superior glass rectangular shape 2000x600 mm (of approved quality) and of required shape and size with plastic moulded frame of approved make and fixed on wall with suitable steel bolt/screw complete all as specified and directed. |
| 79 | S&F in repair brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 80 | S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints,fitting with clamp/laid in trenches or in floor complete all as specified and directed. |
| 81 | S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints,fitting with clamp/laid in trenches or in floor complete all as specified and directed. |
| 82 | S&F of 110 mm PVC (SWR) bends complete all as specified and directed. |
| 83 | S&F of 75 mm PVC (SWR) bends complete all as specified and directed. |
| 84 | S&F of110 mm PVC (SWR) bend provided with access door complete all as specified and directed. |
| 85 | S&F in repair 150 mm inner dia CPVC rain water Pipes& fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 86 | S&F of150 mmPVC (SWR) bend complete all as specified and directed. |
| 87 | S&F of Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 88 | M&L for 100mm bore PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 89 | M&L for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solventcement complete all as specified and directed. |
| 90 | Digging out and removing sunken floor filling (Cement concrete concrete unreinforced) any position and depositing the same at a distance not exceeding 250 M away from outer edge of bldg complete all as specified and directed. |
| 91 | M&L for plain cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as filling of sunken floors complete all as specified and directed. |
| 92 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished fair even and smooth including mixing of WPC in mortar complete all as specified and directed. |
| 93 | M&L for applying two coats of NITOBOND SBR polymer modified coating to a thickness of 1 mm, 1st coat (Nitobond SBR chimimal 1 Ltr, waater 2 ltrs,cement 3 kg) Second coat (Nitobond SBR chiemcal 1 Ltr,cement 3 kg) including preparation thoroughly without any traces of dirt or laitance as in sunken floors complete all as specified and directed. |
| 94 | Dismantling structuralsteel workincluding doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 95 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 96 | M&L for perparation of new or previously untreated steel surface of any description two coats of synthetic enamel paint over and including a coat of red oxide primer on steel surfaces , n.exc 10cm in width or girthwhen unconnected with other painting or when painted in adifferent tint complete all as specified and directed. |
| 97 | Dismantling 1000 ltr water tanks and removing to store complete all as specified and directed. |
| 98 | S&F 1000 ltrs capacity rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) including tank nipple hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 99 | S&Fof 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 100 | S&F in repair Gun-metal, globe or gate valves,with iron wheel head, screwedboth ends for iron pipe and fixed complete all as specified and directed. |
| 101 | M&L for filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-chargecomplete all as specified and directed., complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 5 mm depth and 5 mm width. |
| 102 | Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed. |
| 103 | Dismantling timber scantlings 40 sqcm and over in section in any position unframed work complete all as specified and directed. |
| 104 | S&F 2nd class softwood in scantling clean swan timber framed and fixed to the position complete all as specified and directed. |
| 105 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc.of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 106 | M&L for PVC edge bending tape 2.00 mm thick complete all as specified and directed. |
| 107 | M&L for fixing Float glass panes/glass strip 5.0 mm thick (weight not less than 12.50 kg/sqm) as in cup board with clip, bush, rubber etc necessary fiiting complete all as specified and directed. |
| 108 | M&L for fixing special quality bright finished brass cupboard or ward robe locks 65 mm with four levers of approved quality including necessary screws etc. complete all as specified and directed. |
| 109 | S&F 40 mm Continuous (piano) hinges,brass bright finish complete all as specified and directed. |
| 110 | S&F of 100 mm bright finish brass handles, cast type,polished bright complete all as specified and directed. |
| 111 | S&F Magnetic catcher triple strip horizontal type design apporved by Engr-in-charge complete all as specified and directed. |
| 112 | M&L in repair for 18mm thick both side pre-laminated high density high moisture resistances (HDHMR) board any colour wood grains, with white base paint finish UV HDHMR corner side rounding with edge ending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour shall be approved by GE) Make:- Bhutan Tuff India, Green Ply, Archid |
| 113 | Supply and fixing for stainless SteelHandle 100mm complete all as specified and directed |
| 114 | Supply and fixing for Leg PVC 100mm complete all as specified and directed |
| 115 | Supply and fixing for stainless Steel Inotech,pot & pan complete all as specified and directed |
| 116 | Supply and fixing for Wicker basket 600mm Eoan/stainless Steel base complete all as specified and directed |
| 117 | Supply and fixing for stainless Steel Bin holder complete all as specified and directed |
| 118 | Supply and fixing for stainless steel detergent holder complete all as specified and directed |
| 119 | Supply and fixing for PVC cutlery 900 mm complete all as specified and directed |
| 120 | Supply and fixing for stainless steel dish Rack 900 mm complete all as specified and directed |
| 121 | Supply and fixing for stainless steel bottle Pullout 300mmcomplete all as specified and directed |
| 122 | Supply and fixing for stainless steel masala pullout 300mm complete all as specified and directed |
| 123 | Supply and fixing for stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full thread steel screws including making necessary recess in board and finished etc size as directed by Engineer-in-Charge completed. |
| 124 | PVC Skirting & Dado any shape and size as directed by Engineer-in-Charge completed. |
| 125 | M&L for Swing corner Stainless Steel wood base standard size complete all as specified and directed. |
| 126 | M&L for Telescopic channel 550 mm zinc silver complete all as specified and directed. |
| 127 | Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping(light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing complete all as specified and directed.Note: Location ,route,Qty,size and type of new point wiring may be different from old unsv point wirirng as per site requirement and credit will be measured and issued as per actual. |
| 128 | Taking down carefully by sub main wiring/service connection of any typecomplete all as specifed & as directed. |
| 129 | M&L for Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC insulated and unsheathed FRLSH copper conductor single core multi stranded flexible coppercable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through non metallic rigid PVC heavy duty conduit medium gradein concealed after cutting the chases(min 20mm dia external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I, ISI marked including conduit and accessories like bends, tees, junction boxes etc fixed concealedwith all accessories suitable formodular type fitment includingmodular metal flush boxes and modular cover plate with frameof suitable sizefor fixing ofmodular switches/sockets/regulator etc along with PVC insulated and unsheathed FRLSH1.5 sqmm multi stranded copper conductor cable 1100V (green color) as continuous earthlead wire connected to common earth and earth dollycomplete all as specified and directed. Note:The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit, metal flush boxes, modular cover plate with frame etc. and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this. |
| 130 | All as per Ser item No 129 here-in-before but one bell /buzzer point controlled by one bell push push button on the same board or independent board with the cable 1.50 sqmm size complete all as specified and directed. |
| 131 | Supply and fixing Modular bell push one way 6 Amp,1 Module complete all as specified and as directed. |
| 132 | Supply and fixing Modular switchone way 6 Amp,1 Module complete all as specified and as directed. |
| 133 | Supplying and fixing Modular socket, 6 amps-3 pin combined, 2 Module complete all as specified and as directed. |
| 134 | Supplying and fixing Modular switch , one way, 16 amps, one Module complete all as specified and as directed. |
| 135 | Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module complete all as specified and as directed. |
| 136 | Supply and fixingModular capacitive-based fan step regulator 120 watt 2 module suitable for BLDC fancomplete all as specified and as directed. |
| 137 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required |
| 138 | Supply & Fix in repairs Ceiling rose surface type, PVC/Polycarbonate islated body size50x28 mm two to three terminals. |
| 139 | Supply and fixing 2 Modular metal Flush box as per site requirement complete all as specified and directed. |
| 140 | All as per item No. 139.00 here-in-before but for 3 module complete all as specified and as directed. |
| 141 | All as per item 139.00 here-in-before but for 6 module complete all as specified and as directed. |
| 142 | Supply and fixing 2 module cover plate with frame as per site requirement for following module |
| 143 | All as per item 142.00 here-in-before but for 3 module complete all as specified and as directed. |
| 144 | All as per item 142.00 here-in-before but for 6 module complete all as specified and as directed. |
| 145 | Supply and fixing 20 A motor starter switch for single phase 230 V complete all as specified and directed.(For Airconditioner) |
| 146 | Supply and draw sub main wiringof two run with 2.5 sqmm PVC insulated and unsheathed FRLSH copper conductor single core multi stranded flexible coppercable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through non metallic rigid PVC heavy duty conduitin concealed after cutting the chases of suitable size conduit as per actual site requirement in accordance with clause No 19.125 of SSR Part I, ISI marked including conduit and accessories like bends, tees, junction boxes etc fixed concealedwith all accessories suitable formodular type fitmentalong with PVC insulated and unsheathed FRLSH 2.5 sqmm multi stranded copper conductor cable 1100V (green color) as continuous earthlead wire connected to common earth and earth dollycomplete all as specified and directed by Engineer-in-Charge. Note:(i) The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit,and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this.(ii) Two runs of single core cable with one run of earth continuity conductor including PVC conduit and accessories shall be measured and paid as one unit (RM) including making good disturbed surface all as specified and directed. |
| 147 | All as per Item No 146.00 here-in-before but for2x4.0 Sqmm+1x4 Sqmm earth wire,(For AC point/power point) complete all as specified and as directed. |
| 148 | All as per Item No 146.00 here-in-before but for 2x6.0 Sqmm+1x6 Sqmm earth wire,(For VTPN DB toSPN DB 8 Way) complete all as specified and as directed. |
| 149 | All as per Item No 146.00 here-in-before but for 4x10.0 Sqmm+1x10.0 Sqmm earth wire,(For VTPN DB toSPN DB 12Way) complete all as specified and as directed. |
| 150 | Supply and fix a precisely designed decorative PMMA diffuser 2\"X2\" panel, 34W 115 lumens/Watt LED suitable for armstrong/grid/POP ceiling,that unites a creative design with state ofthe art LED technology ,delivers perfect illumination and greater uniformitywith extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with separate electronic driver & high brightness SMD LEDs, ,powered by an independent isolated SELC output electronic LED driver(SMPS based) with output short- circuit protection,surge protection & other reliablity test as per IS 15885, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cordcomplete all as specified and directed . |
| 151 | Supply and fix a ultra modern recess mounting 2\"X2\" panel, 42W 130 lumens/Watt LED suitable for armstrong/grid/POP ceiling, provides soft-light and glare free symmetrical illuminations with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation,powered by an independent isolated SELC output electronic LED driver(SMPS based) with output short- circuit protection,surge protection & other reliablity test as per IS 15885, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cordcomplete all as specified and directed . |
| 152 | Supply and fix a aesthetically designed 2\"x2\" led flat panel, 42W 130 lumens/Watt LED suitable for armstrong/grid/POP ceiling, provides soft-light and glare free symmetrical illuminations with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with separate electronic driver & high brightness SMD LEDs, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed . |
| 153 | Supply and fix a aesthetically designed 1\"x1\" led flat panel, 24W 100 lumens/Watt LED suitable for armstrong/grid/POP ceiling, provides soft-light and glare free symmetrical illuminations with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with separate electronic driver & high brightness SMD LEDs, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed . |
| 154 | Supply and fix Recess mounted LED wall washers 8 W LED LIGHT suitable for armstrong /grid /POP ceiling, tilted 70° outwards and swivels 350° to offer best illumination on the wall and retail displays,with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with separate electronic driver & high brightness SMD LEDs, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed. |
| 155 | Supply and fix SURFACE SPOT LIGHT8 W LEDsuitable for armstrong /grid /POP ceiling,Uneco surface light with black powder coated aluminum housing and pressure die-cast heat sink having high efficiency ,powered by built- in ,isolated SELC output electronic LED driver(SMPS based) with no UV & IR radiation and provide output short- circuit protection,surge protection & other reliablity test as per IS 15885, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cordcomplete all as specified and directed . |
| 156 | Supply and fixLED STEP LIGHT 07 W suitable for all types of steps, Environmental friendly, new generation, energy saving, decorative rectangular shaped IP66 LED step light with pressure die cast aluminium housing and powered by built - in potted electronic led driver with APFC (SMPS based )with no UV & IR radiation and provide output short- circuit protection,surge protection & other reliablity test as per IS 15885, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cordcomplete all as specified and directed . |
| 157 | Supply and fix LED BOLLARD 10Wsuitable for garden light , Unique concept LED Bollard in IP 66led bollard light with housingmade up of aluminium pipe UV protected pure polyester poweder coated and powered by built - inpotted electronic led driver with APFC (SMPS based )with no UV & IR radiation and provide output short- circuit protection,surge protection & other reliablity test as per IS 15885, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cordcomplete all as specified and directed. |
| 158 | Supply and fix TRACK LIGHT15W LED suitable for armstrong /grid W/POP ceiling,Track mounted LED light with pressure die cast aluminium housing and powered bu built- in isolated electronic LED driver in ABS housing with no UV & IV radiation and provide output short- circuit protection,surge protection & other reliablity test as per IS 15885, complete with connecting accessories & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cordcomplete all as specified and directed. |
| 159 | Supply and fix surface and wall mountedLED Batten 20 W having efficacy not less than 110 lumnes/watt (4 Feet) light fitting with decorative end caps LED lighting fixture delivers high brightness & excellent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 24W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed by Engr-in-charge. |
| 160 | Supply and fix surface and wall mounted LED Batten 10W (2 Feet) light fitting with decorative end caps LED lighting fixture delivers high brightness & excellent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 10W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed by Engr-in-charge. |
| 161 | Supply and fix street light 60 watt for Bldg security New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08.complete all as specified and directed by Engr-in-charge. |
| 162 | Supply and fix street light bracket upto 40mm bore GI pipe/tubing light grade suitable for fixing street light 1.5 Mtr long bend at 120 degree and fix with 2 x MS clamps made of 40x5 mm flat iron including suitable nuts, bolts and washers suitable for fixing on walls/poles etc and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. |
| 163 | Supplying and fixing double door 8 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required complete all as specified and directed. (But without MCB/RCCB/Isolator) |
| 164 | Supplying and fixing double door 12 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required complete all as specified and directed. (But without MCB/RCCB/Isolator) |
| 165 | Supply and fixing sheet metal enclouser distribution board 415 volt, Vertical TPN 4 Way (MCCB+12 modules) with provision for suitable MCCB FP/TP up to 125 A as incomer & MCBs as out going as per IS including compact insulated bus bar and rounded neutral bar,earthing complete double door reccess mounting IP-43protection, , including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etccomplete all as specified and directed. Note - MCCB & MCBs will be measured separately. |
| 166 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required complete all as specified and directed. |
| 167 | Supplying and fixing MCBDP of 40 to 63 Arating, double pole, 240 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required complete all as specified and directed. |
| 168 | Supplying and fixing 40Arating, double pole, (single phase and neutral), 240 V, residual current circuit breaker with overload protection (RCBO), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc as required complete all as specified and directed. |
| 169 | Supplying and fixing 63Arating, double pole, (single phase and neutral), 240 V, residual current circuit breaker with overload protection (RCBO), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc as required complete all as specified and directed. |
| 170 | Supplying and fixing 40 to 100 A rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required complete all as specified and directed. |
| 171 | Supply and fixing 125 Arating, 16KAbreaking capacity, four pole, adjustable type MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required complete all as specified and directed. |
| 172 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades and depositing to MES store complete all as specified and directed. |
| 173 | Hanging only (refixing) ceiling fan and connected up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 174 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level,connected to galvanized iron wire of 4 mm dia earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, earth wire protected by and including GI pipe 15 mm bore (light grade) and connected to main switch / MCB DBs box point as directed and includingcement concret pit with CI cover 10 mm thick hinged to CI frame all as shown under electrical plate No 3 SSR Pt - I 2009 includingpainting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel, 20mm bore GI Pipe (Medium grade) for watering, charcoal and salt in alternative layers of 15cm thick all arround the electrode, including necessary excavation and earth work in any type of soil complete all as shown in electrical plate of SSR part -I and testing on completion complete all as specified and directed. |
| 175 | Supplying and laying 4 mm GI wire at 0.5 mtr below ground level for conductor earth electrode, incl connection/termination with GI thimble etc. as required complete all as specified and directed. |
| 176 | Supply, installation and testing of ceiling mounted PIR occupancy senser, 230 volt ± 10% AC, 50 Hz, load 6 Amps, 360 degree detection, range 6-7 meter with LED indicator and switch off delay, IP 20 suitable for any type of electrical load complete all as specified and directed. |
| 177 | M&L Taking downthe split /Window A/c unit from existing position from any hight of capacity1.5/2.0 Ton ofany make deposited to MES yard complete all as specified and directed. |
| 178 | M&L for refix the old window type AC of capacity 1.5/2.0 TR , completecharging of refrigerator Gas up to required level andfilling the cavities on wallsetting of grills alignment complete inluding , testing & commissioning complete all as specified and directed. |
| 179 | M&L for and refix the old split type AC unit of capacity 1.5/2.0 TR capacityby fixing the indoor and out door unit in positin as directedincluding connecting with replacement of copper tubingup to 3.0 Mtrs length brazing , weldingincluding insulation , completecharging of refrigerator Gas up to required level andfilling the cavities on wallsetting of grills alignment complete inluding , testing & commissioning complete all as specified and directed. |
| 180 | M&L for air termination vertical type single pointed rod made of 12 mm dia 300 mm long aluminium rod including necessary fixing arrangement with bolt, nuts and washers etc complete all as specified and directed. |
| 181 | Fixing only Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. |
| 182 | M&L forAluminium strip 25 x 3.15 mm with new saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 183 | All as per item No. 182.00 here-in-before but Galvanised iron strip 32 x 6mm buried in ground complete all as specified and directed. |
| 184 | M&L for Tubes, medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings by flat iron clamp nuts bolts etc complete or laid in floors 40 mm dia complete all as specified and directed. |
| 185 | Material and labour for PCC (1:2:4) type B - 1 using 20 mm graded aggregate as in foundation of pole/ stay and filling of mass concrete including necessary form work complete all as specified and directed. |
| 186 | Supply and fixing Rigid non-metallic PVC conduit 25 mm dia concealed in wall exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bellmouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc. Note:The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit, etc. and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this complete all as specified and directed. |
| 187 | Supply and fixing 2 Modular metal Flush box as per site requirement complete all as specified and directed. |
| 188 | Supply and fixing 2 module cover plate with frame as per site requirement complete alll as specified and directed. |
| 189 | Supply and fixing telephone sockets RJ 11 (4 wire) Modular type 01 Module suitable for telephone cablecomplete set complete all as specified and directed. |
| 190 | Supply and fixing LAN sockets RJ 45 Cat 6Modular type 01 Module suitable for LAN cablecomplete set complete all as specified and directed. |
| 191 | Supply and fixing modular blanking plate, 1 module complete all as specified and directed. |
| 192 | Supply Installation,Testing and commissioning of 100% Inverter VRF Modular units 40 HP(28HP+12HP) complete with Inverter Scrollcompressor fitted with Conentrated winding, air cooled condenser with low noise fan havinginterconnected control wiring and refrigerant piping housed in compact housing duly powder coated, Conformal Coating on PCB, Hydrophilic Blue Fins, Twin Accumulator & Two Compressors in each Outdoor Unit. All units are Cooling & Heating both with Eco Friendly Refrigerant(R-410a). Unit should deliver 100% capacity without deration upto 43°C Ambient Temperature.Operating Outdoor Ambient Temperature Range Cooling 10°C to 53°C & for Heating -10°C to 24°C.IPLV should be more than 6.7. VRF Installation work to be execute by OEM or OEM Authorised Vendor Only. All Drawings & Heat Load should be Vetted through OEM only complete all as per specified and directed. |
| 193 | All as per item No. 192.00 here-in-before but for 48HP (24HP+24HP) complete all as specified and directed. |
| 194 | Supply installation,testing and commissioning ofCassette Units of capacity 4.0 TR (1095 CFM) with evaporator coil,fan and Fan motor,with cordless remote control, Drain Pump and necessaryaccessories etc suitable for operation on 230 V +- 10% 50 Hz single phase AC supply complete all as per specified and directed. |
| 195 | All as per item No. 194.00 here-in-before but for 3.2 TR (1095 CFM) all as per specified and directed. |
| 196 | All as per item No. 194.00 here-in-before but for 2.8 TR (945 CFM) all as per specified and directed. |
| 197 | S&F refrigerantY-JointforCombiningOutdoorandIndoorUnitsrequiredfordistributionof refrigerantincopperpipingasperfinalapproveddrawing whichwillbesubmitted byOEM .The Y Joints refnet shall be suitable for 9.5 mm to 38.1 mm high pressure pipe all as per specified and directed. |
| 198 | Supply,installation,testingandcommissioninghighpressureinterconnectingrefrigerantpipeof 9.5 mm with 13 mm thick insulation,includingcivilworklike wallopening forcopper anddrain pipefor VRFsystem with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation between indoor & outdoor units as per specifications.All Piping intall on cable trays with cover for outdoor locations as per OEM recommendations and PVC sleeves shall be provided wherever pipe is crossing the wall. Food grade nitrogen shall beusedwhilemakingbrazing jointscomplete allas specifiedand directed. |
| 199 | All as per item No. 198.00 here-in-before but for 12.7 mm with 13 mmthick insulation complete all as specified and directed. |
| 200 | All as per item No. 198.00 here-in-before but for 15.9 mm with 13 mmthick insulation complete all as specified and directed. |
| 201 | All as per item No. 198.00 here-in-before but for 19.1 mm with 13 mmthick insulation complete all as specified and directed. |
| 202 | All as per item No. 198.00 here-in-before but for 22.2 mm with 19 mmthick insulation complete all as specified and directed. |
| 203 | All as per item No. 198.00 here-in-before but for 28.6 mm with 19 mmthick insulation complete all as specified and directed. |
| 204 | All as per item No. 198.00 here-in-before but for 34.9 mm with 19 mmthick insulation complete all as specified and directed. |
| 205 | All as per item No. 198.00 here-in-before but for 38.1 mm with 19 mmthick insulation complete all as specified and directed. |
| 206 | Supply and fixing in position the 32mm dia of PVC (UPVC quality) pipes, cut in required lengths and joined with PVC cement and also providing and fixing in position the necessary \"U\" trap elbows, tees, and reducer and all types of fittings. Cost to include all necessary as required. Necessary Wall cutting and making the wall good and its cost should be included. The pipe to be insulated by 9mm thick nitrile rubber thermal insulation of class 0 category complete all as specified and directed. |
| 207 | Supply, fixing, testing and commissioning of 2 Core x 0.75mm² control wiring ( Sheilded Wire) from outdoor to indoor units to the central controllerwith all necessary accessories to make it functional inlcuding PVC concealed conduit of suitable size, includsive of all tees, bends, elbows, reducers, bellmouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc complete all as specified and directed.Note: The rate of cutting chases required for concealing the PVC conduits alongwith the fittings/fixtures like elbow, bends, conduit etc and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this. |
| 208 | Supply and fixing of MS Stand as per OEM Recommendation and Placing of Outdour Unit on MS Stand of C Channel complete all as specified and directed. |
| 209 | Supply, Charging of Refrigerant Gas R410a as per OEM Recommendation and complete all as per specified and directed. |
| 210 | Supply and fixing of 125mm deep AntivibrationFlexible Jointsmade out of imported fire retardant fabric with extruded aluminium frame/ flange on both sides for Outdoor Units complete all as specified and directed. |
| 211 | Supplying and installation of (150 mm width x 50 mm depth x 1.6 mm thickness) perforated Hot Dipped Galvanised Iron Covered cable tray for exposed refrigerant pipe With Bends, Tee, Cross Member & Reducer (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required complete all as specified and directed. |
| 212 | All as per item No. 211.00 here-in-before butsize (300 mm width x 50 mm depth x 1.6 mm thickness) complete all as specified and directed. |
| 213 | All as per item No. 211.00 here-in-before butsize (450 mm width x 50 mm depth x 2.0 mm thickness) complete all as specified and directed. |
| 214 | Supply and draw sub main wiringof four run with 10 sqmm PVC insulated and unsheathed FRLSHcopper conductor single core multi stranded flexible coppercable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through rigid pvc conduit medium grade of size 50 mm dia oversurface/ concealed as per site requirement in accordance with clause No 19.125 of SSR Part I, ISI marked including conduit and accessories like bends, tees, junction boxes etc fixed concealedwith all accessoriesalong with PVC insulated and unsheathed FRLSH10 sqmm multi stranded copper conductor cable 1100V (green color) as continuous earthlead wire connected to common earth and earth dollycomplete all as specified and directed by Engineer-in-Charge. Note:(i) The rate of cutting chases required for concealing the PVC conduitalongwith the fittings / fixtures like elbow, bends , conduit,and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this.(ii) Four runs of single core cable with one run of earth continuity conductor including PVC conduit and accessories shall be measured and paid as one unit (RM)all as specified and directed. |
| 215 | All as per item No. 214.00 here-in-beforebut 4x16 sqmm+1x16 Sqmm earth wire complete all as specified and directed. |
| 216 | Supply and fixing Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 4 way with IP-43 double door complete with 200 Amps rated bus bar, earth link and neutral link with provision for fixing incomer and outgoing MCBs as outgoing switchgears, fixed flush in wall including chasescutting in wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.Note: MCBs will be measured separately. |
| 217 | Supply and fixing in repairs MCB TPN 40 to 100 Amps 240 volts 10 KA\"\"C\"\" Series complete all as specified and directed. |
| 218 | Supply, installation, testing and commissioning outdoor type cubical LTpanel board ofouter shell made out of 3.15 mm and inner shell made out of 2.0 mm thick MS sheet and MS angle section 50 x 50 x 6mm on PCC 1:2:4 type B-1 platform 60 cmabove the ground level and 45cm below the ground level, factory fabricated with front and back openable double door systemlockable, openable by keys, having pad lock arrangement with both side, with 02 Nos of pad lock with three keys for each, louvers and air vent, gasket ‘u’ type for natural flow of air, completed dust & vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz factor fabricated ( Factory approved from CPRI) having modern fabrication followed by power coated painting TPN aluminum bus bar 400 Amps insulated with colour coded heat shrinkable and shall be mounted on suitable size ‘F’ class insulators,comprising of the followings and specified herewith:- (i) Rectangular Aluminium bus bar fixed on insulated mounting arrangement 400 Amps current rating -04 Nos provided with heat shrinkable sleeve not less than one mm thick. (ii) Cable alley for 01 I/C and 09 outging feeders. |
| 219 | (a) INCOMING (i)MCCB 250 Amps, AC 4 pole 415 Volt 36 KA Breaking Capacity ,adjustable type - 01 Nos.(b) OUTGOING (ii)MCCB 63 Amps, AC 4 pole 415 Volt 16 KA Breaking Capacity,adjustable type- 04 Nos.(iii)MCCB 40 Amps, AC 4 pole 415 Volt 16 KA Breaking Capacity ,adjustable type- 02 Nos.(iv) MCB TPN 63 Amp,breaking capacity 10 KA, \"C\" type - 01 Nos(v) MCB SPN 6 - 32 Amp,breaking capacity 10 KA, \"C\" type - 02 Nos(vi) Onload change over 250 Amp 4 pole complete all as specified.- 01 Nos(vii) Digital voltmeter with selector switch with Suitable CT\"s for incoming.(viii) Digital ammeter with selector switch alognwith suitable CT\"s for incoming andeach outgoing connection .(ix) Phase indicating lamp LED Type (R-Y-B) for incoming and each outgoing connections |
| 220 | Supply, laying, jointing and testing, fixing to wall using clamps / pole/ floor or in air or passing through pipes /ducts / road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cableXLPE insulated, screened ,PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 120 Sqmm 3.5 core complete all as specified and as directed. |
| 221 | Supplying, installing, testing and commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed temperature (dual thermistor) type mounting base complete with all connection complete all as specified and directed. |
| 222 | Supplying, installing, testing and commissioning of smoke detector with builtin LED and mounting base complete with all connection complete all as specified and directed. |
| 223 | Supplying, installing, testing and commissioning of manual call point of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button all as required complete specified and directed. |
| 224 | Supplying, installing, testing and commissioning response indicator on surface/recess MS box having two LEDs metalic cover complete with all connection complete all as specified and directed. |
| 225 | Supplying, installing, testing and commissioning fire alarm sounder with facility to make announcement, mounted in MS box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete all as specified and directed. |
| 226 | Supplying, installing, testing and commissioning ofsector panel suitable for 06 zone, complete with virtualindication for short circuit fault, open circuit fault ,fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required complete all as specified and directed. |
| 227 | Supply and draw of 2x1.5 sqmm fire retardant unarmoured(LSZH) cable 600/1000V rated with annealed copper conductor having XLPE insulation in pvc conduit complete all as specified and directed. |
| 228 | Supplying, installing, testing and commissioning main control panel and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.10 zone panel for fire alarm system250 watt amplifier racks suitable for operation on 230V AC/24V DC supply confirming to IEC-268-3 complete with all accessories as required-2 Nos (one to act as standby)Talk back master station with LED PTT (Press to talk) push button for operation on 230V AC/24V DC supply confirming to IEC-268 for simplex mode ofoperation/Communication suitable for 20 Nos. talk back unit-1setAnnouncement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required.-1 setAmplifier change over switch for inter changing amplifier-01 NoMonitor panel for loud speaker complete with output selector, ON/OFF switch, fuse, visual indication etc. complete as required-1NoGooseneck microphone with stand and ON/OFF switch-1 NoMain ON/OFF switch, fuse indication lamp, DC and AC voltmeter & ammeters, terminal block etc. complete as required-1 setBattery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories incl providing and fixing of 2 nos 12 volt 60 AH each sealed maintenance free batteries complete all as specified and directed. |
| 229 | Supply and fix in replacement wall mounted speaker 6 watt of PA system all as specified and directed. |
| 230 | Supply and draw of fire retardant speaker cable single pair 2 core 1.5 Sqmmin pvc conduit complete all as specified and directed. |
| 231 | Supply and fixing Rigid non-metallic PVC conduit 25 mm dia concealed in wall exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bellmouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc. Note:The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit, etc. and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this complete all as specified and directed. |
| 232 | S&F wall mounted LED emergency Exit signage luminaire Lit up using regular mains supply comes with a unique rechargeable Ni-Cd battery capable of emergency back up upto 02 hours complete all as specified and directed. |
| 233 | Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in soft/loose soil complete all as specified and as directed. |
| 234 | Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft loose soil complete all as specified and as directed. |
| 235 | Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. |
| 236 | Supply, laying & testing of LT UG cable XLPE insulated armouredheavy duty elect cable with stranded aluminiumconductor 1100 volts grade cross section area185 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed. |
| 237 | Supply, laying & testing of LT UG cable XLPE insulated armouredheavy duty elect cable with stranded aluminiumconductor 1100 volts grade cross section area50 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed. |
| 238 | Supply, laying & testing of LT UG cable XLPE insulated armouredheavy duty elect cable with stranded aluminiumconductor 1100 volts grade cross section area35 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed. |
| 239 | Supply & fixing or layingHDPE (DWC) pipe of bore (inner dia) not less than 100 mm fixing on poles, walls under floors, laying on surface etcas reqd at site complete all as specified and directed. Note:The rates of required accessories, bend, joints, clamps, nut bolts, for fixing on wall / surface etc are deemed to be included in quoted rates . |
| 240 | Supply & fixing or layingHDPE (DWC) pipe of bore (inner dia) not less than 75 mm fixing on poles, walls under floors, laying on surface etcas reqd at site complete all as specified and directed. Note:The rates of required accessories, bend, joints, clamps, nut bolts, for fixing on wall / surface etc are deemed to be included in quoted rates . |
| 241 | Supply and layingGalvanized steel tubing light grade with complete all fittings such as elbbow, unions, nipples, tees, bends, short pieces, connectors, back nuts, caps, plugs, diminishing pieces and sockets etc all as per siterequirement of size 50 mm diacomplete all as per specified and directed. |
| 242 | Supply, installation, testing and commissioning outdoor type cubical LTpanel board ofouter shell made out of 3.15 mm and inner shell made out of 2.0 mm thick MS sheet and MS angle section 50 x 50 x 6mm on PCC 1:2:4 type B-1 platform 60 cmabove the ground level and 45cm below the ground level, factory fabricated with front and back openable double door systemlockable, openable by keys, having pad lock arrangement with both side, with 02 Nos of pad lock with three keys for each, louvers and air vent, gasket ‘u’ type for natural flow of air, completed dust & vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz factor fabricated (Factory approved from CPRI) having modern fabrication followed by power coated painting TPN aluminum bus bar 600 Amps insulated with colour coded heat shrinkable and shall be mounted on suitable size ‘F’ class insulators,comprising of the followings and specified herewith:- (i) Rectangular Aluminium bus bar fixed on insulated mounting arrangement 600 Amps current rating -04 Nos provided with heat shrinkable sleeve not less than one mm thick.(ii) Cable alley for 01 I/C and 05 outging feeders. |
| 243 | (a) INCOMING(i)MCCB 350 Amps, AC 4 pole 415 Volt 36 KA Breaking Capacity,adjustable type - 01 Nos(b) OUTGOING (ii)MCCB 160 Amps, AC 4 pole 415 Volt 36 KA Breaking Capacity ,adjustable type- 01 Nos(iii)MCCB 125 Amps, AC 4 pole 415 Volt 16 KA Breaking Capacity adjustable type- 02 Nos(iv) MCB SPN 5 - 32 Amp,breaking capacity 10 KA, \"C\" type - 02 Nos(v) Onload change over 400 Amp 4 pole complete all as specified.(vi) Digital voltmeter with selector switch with Suitable CT\"s for incoming.(vii) Digital ammeter with selector switch alognwith suitable CT\"s for incoming andeach outgoing connection .(viii) Phase indicating lamp LED Type (R-Y-B) for incoming and each outgoing connections |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail