|
| 1 | Demolition of cement concrete (Un-reinforced) of any description andin any position not otherwise specifically provided for all as specified and directed. |
| 2 | Surface excavationnot exc 30cm deep and avg 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. or for cable protection not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed. |
| 5 | Removing excavated material ( soils of any type) n exc. 50 mand depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 6 | M&L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 7 | M&L Plain Cement Concrete type B-0, (1:2:4) (12.5mm graded crushed stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbincluding form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 8 | M&L Formwork to Sides of Concrete Founda-tions, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed. |
| 9 | M&L for TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and bindingwith and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed. |
| 11 | S&FStack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 75mm to 150mm complete all as specified and directed. |
| 12 | M&L Brick work usingPulverizes fly ash bricks of class designation 75, straigth or curved on plan exc 6m mean radius built in CM (1:4) cmplete all as specified and directed. |
| 13 | M&L Glazed Ceramic Coloured Tile 450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layerin cement mortar (1:4) complete all as specified and as directed. |
| 14 | M&L Cement Concrete type D2 (1:4:8) using 40mm graded aggregate 75mm thick in Sub-bases, finishing concrete surfaces fair and even, complete all as specified and as directed. |
| 15 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footpath parks, lawns drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mouldlaid in required colour & pattern over and including 50mm thick compacted bed of coarse sand compacting and proper embedding laying of inter vibrator fillingthe joints with fine sand bedding layer through vibratory compaction by using plate vibrator filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified |
| 16 | M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair complete all as specified and directed |
| 17 | M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Base Paintover a coat of primer complete all as specified and as directed. |
| 18 | S&F PVC (SWR) Bend 110mm bore (dia), any type etc. and Jointing with Solvent Cement,complete all as specified and as directed. |
| 19 | Taking down carefully existingunserviceable copper/aluminiumpoint wiring (light, fan, socket orpower point etc)completewith fittings/fixures such asswitches sockets, ceiling rose, fan regulators, FTLfittings and making goodto the disturbedsurface complete all asdirected by Eng-in-Charge. |
| 20 | M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets,regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earthand connecting to earth dolly for one light or fanpoint controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.Note: Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.. |
| 21 | All as per item No.20.00here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge. |
| 22 | All as per item No.20.00 here-in-before but one 3pin switch socket outlet 5A on independent board complete all as specified and directed by engineer incharge. |
| 23 | M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping(like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including supply & fixing of 1.6 mm thick pressed mild steelterminal boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed. |
| 24 | S&F Switch piano, flush type, SP, one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed. |
| 25 | S&FSwitch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flushtype complete all as specified and as directed. |
| 26 | S&FSocket outlet 3/5 pin, 6 Amps, 240 volt flushtype complete all as specified and as directed. |
| 27 | S&FSwitch socket combination multipurpose 2 in 1, 3 pin 15 Amps 230/240 volt flushtype complete all as specified and as directed. |
| 28 | S&F Ceiling rose surface bakelitethree terminals 240 volts complete all as specified and as directed. |
| 29 | S&F plug and socket in sheet metal enclosures with two pin and earth plug and socket complete with and including MCB SP 20 Amps 240 volts heavy duty all as specified and as directed by Engr-in-charge. |
| 30 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F building security light pressure die cast housing with individual LEDs with modular secondary optics security light luminaires 35 watt LED with 50mm dia light grade GI pipe bent to shape of 45\"\" 1.5 mtr long and nuts bolts including fixing arrangement after taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F Sheet metal enclosure for DB\"s when MCBs to be used 4 way single pole and neutral double door with 200 amps ratedbus bar complete 240 volts complete all as specified and as directed. |
| 33 | S&F MCB 6 to 32 Amps, SP, 240 Volts , \"C\" curve breaking capacity 10 kAcompleteall as specified and as directed. |
| 34 | S&FMCB 40 to 63 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed. |
| 35 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 2.5 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 2.5 Sqmm as earth lead drawninto rigid non metalic PVC conduit of size 25 mm dia including all fittingscomplete all as specified and as directed.Note:- Two runsof 2.5 Sqmm conductor as main wireand one run of 2.5 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. |
| 36 | Supplying and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with all the connection as directed. |
| 37 | Taking down unserviceable ceiling fans and supplying and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with all the connection as directed. NOTE- unserviceable fans to be deposited in MES Storeyard. |
| 38 | Taking down unserviceable ceiling fans and supplying and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with all the connection as directed. NOTE- unserviceable fans to be deposited in MES Storeyard. |
| 39 | Taking down unserviceable wall fans andSupply and fix Wall fan of min 400m sweep 240V, 50hz,min 1350RPM, 100CMM air deliverycomplete all as specified and as directed.NOTE- unserviceable fans to be deposited in MES Storeyard. |
| 40 | Taking down unserviceable exhaust fans and supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers with making good the surface as s per existing finish complete with all the connection as directed. NOTE- Old unserviceable ones to be deposited to MES Store. |
| 41 | Taking down unserviceable exhaust fans and supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers with making good the surface as s per existing finish complete with all the connection as directed. NOTE- Old unserviceable ones to be deposited to MES Store. |
| 42 | Taking down unserviceable geyser and Supply, installation and commisioning electric storage water heaater (Geyser) of capacity 25 litre and wattage 2 KW having temperature range upto 75 degree celcius, with knob and display for different temerature setting control unit working pressure 0.8 mpa, having 5 Star energy rating, as per IS2082, reheating time less than 60 min, shook proof high density PUF insulation, glass lined inner tank, having warranty of 07 years on, Min 4 years on heating element and 02 Years on other spare parts including following parts:- (a) Capillary type thermostat, (b) Knob + temeprature display, (c) Multifunction valve, (d) Magnesium anode including chromium plated connection pipe of length not less 60cm for hot and cold water connection complete all as per specified and directed. Note :- (1) Anchor fastner bolt for hanging the geyser is included in the quoted rates. (2) Old geyser will be deposited in MES store.NOTE- Old unserviceable ones to be deposited to MES Store. |
| 43 | Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, wire projected by 15 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-Icomplete all as specified and as directed. |
| 44 | Supply and Laying in replacement Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 45 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and as directed. |
| 46 | S & F in repair for chromium platedBib taps for 15 mm bore pipe complete all as specified and directed. |
| 47 | S&F in repair 15mm borestop valve, fancy type cast copper alloy, chromium plated , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
