Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 2 | Demolition of cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 3 | Dismantling Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed. |
| 4 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 5 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm each complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 7 | Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each and keep in Safe Custody for removing to store, complete all as specified and as directed. |
| 8 | Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed. |
| 9 | Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed. |
| 10 | Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed. |
| 11 | Dismantling Wrought Iron or Mild Steel Work, viz. MS Flat Iron (Wind Tie) and Similar Work including MS Bolts, Nuts, etc., complete all as specified and as directed. |
| 12 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 13 | Taking up or down steel tubing 15mm dia and connection complete all as specified and directed |
| 14 | All as per item No. 13.00 above but 20mm dia bore. |
| 15 | Taking down soil/ rainwater pipes (any size or pattern) including all fittings heads shoes bends swan necks etc. including cleaning and refixing or removal to store (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed. |
| 16 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 17 | Surface dressing not exc. 150mm deep and getting out in Soft/Loose Soil, complete all as specified and as directed. |
| 18 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. or for cable protection not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 19 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed. |
| 20 | Removing excavated material ( soils of any type) n exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 21 | Materials and Labour Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per Square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 22 | Materials and Labour Treating the top surface of filled earth at the rate of 5 litres of emulsion per Square metre of surface complete all as specified and directed. |
| 23 | Materials and Labour Treating the soil under plinth protection at the rate of 5 litres of emulsion per Square metre of surface area complete all as specified and directed. |
| 24 | Materials and Labour Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 25 | M&L Hardcore (broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 26 | M&L Moorum/red bajri filling in floors or pavings , laid in lyers 30 cm in thick spread , levelled and rammed including watering complete all as specified and directed by Engr-in-charge. |
| 27 | M&L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 28 | M&L Plain Cement Concrete type C-1, (1:3:6) (20mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 29 | Material and Labour Reinforced Cement Concrete (Design mix) M25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 30 | Material and Labour Reinforced Cement Concrete (Design mix M25) as in Columns, pillars, piers, posts and struts complete all as specified and directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 31 | Material and Labour Reinforced Cement Concrete (Design mix) M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 32 | Material and Labour Reinforced Cement Concrete (Design mix) M25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 33 | Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of laddings, steps, cills, sushades, shelves, lintels etc and cutting chase for concealed water tubing or concealed coduit wiring etc and making good cutting grith n exc 10 cm girth on brick walls complete all as specified and directed. |
| 34 | M&L Brick work using Pulverizes fly ash bricks of class designation 75, straigth or curved on plan exc 6m mean radius built in CM (1:4) cmplete all as specified and directed. |
| 35 | M&L Brick Work with Half Brick work using Pulverizes fly ash bricks of class designation 75, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 36 | Use and waste for formwork to Sides of Concrete Founda-tions, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed. |
| 37 | Use and waste for formwork to suspended slab such as Roof slab, Floor slab, landings, chajja and similar works horizontal or sloping etc., not exceding 200mm thick ,flat rough finished surfaces of concrete, complete all as specified and as directed. |
| 38 | Use and waste for Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, (upto 04 storey high of building) complete all as specified and as directed. |
| 39 | Use and waste of Formwork to Sides and Soffits of Floor or Roof Beams, Beam Haunchings, Girders, Bres-Summers, Lintels, Cantilevers, Shelves including supports, overhangs, etc. also splays between floors and beams, etc., flat, rough finished surfaces of concrete, complete all as specified and as directed. |
| 40 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 41 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 42 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed. |
| 43 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed. |
| 44 | S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed. |
| 45 | M&L 1.50mm thick power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc.and including Tinted glass with sheet glass 4.80mm thick and Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm Complete all as specified and as directed.Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. |
| 46 | S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size of window 600X450mm complete with following specification. (a) Alu frames of size 45x45x1.2mm (b) Rail & Stile 45x45x1.2mm thick (c) 4.80mm thick frosted sheet glassNote :- All ventilators/louvers member including fitting & fixture shall be deem to included quoted rate. Only measure opening size of ventilators/louvers |
| 47 | S&F Aluminium ventilator with powder coated anodized aluminium frame of section size 65.5 x 38.10 x 1.5 mm and Shutter with section 47.62mm x 44.5mm x 1.5mm thick half portion fixed with glass and half portion louvered including powder coated alunimium anodised “D” handle, hinges, peg stays, tower bolt etc including jointing cleats for fixing Builder hardware complete all as specified & directed. |
| 48 | M&L Powder coated aluminium 50 micron anodised partition consist of single groove rectangular section 101.60 x 44.45 x 1.60mm (Section of jindal wt @ 1.301 kg/rm) and double groove rectangular section 101.60 x 44.45 x 1.50mm (Section No 20028 of jindal wt @ 1.301 Kg/rm) including jointing cleats and glazing clips for fixing builder hardware fittings and half portion covered with 5.5 mmthick selected quality frosted or plain glass balance portion covered with 4mm thick ACP sheet including necessary fittings/fixture/aluminium snap beads, sleats etc complete all as specified and directed. |
| 49 | S&F Aluminium door with powder coated anodized aluminium frame of section size 101.60 mm x 44.75 mm x 2.4 mm (jindal section 14021) thick, with shutter of style member size of 85mm x 44.45 x 2.00mm thick (Jindal section 19560), Top/bottom rail of member size 114.30mm x 44.45 x 2.15mm (Jindal section 19574) and lock rail of member size 100mm x 44.45mm x 2.0mm thick (jindal section 19564) with rubber gasket and aluminium glazing clip beading and 100mm mortice locking arrangement ,handle, tower bolt 200mm long per shutter, rollers, etc complete all as specified and directed. |
| 50 | S&F Butt Hinges extruded brass,bright polished size of Hinges 100 mm (medium weight) and fixed with brass hinge pin complete all as specified and as directed. |
| 51 | S&F Aluminium anodised, barrel tower bolts of extruded section, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 52 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 53 | S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed. |
| 54 | S&F Floor door stopper of aluminium aloy body and tongue, anodised with hard drawn steel spring (overall length of cover plate 150mm) complete all as specified and as directed. |
| 55 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate as in repair complete all as specified and as directed. |
| 56 | S&F (piano) mild steel, bright finish or electro galvanised Width of flaps (When open) 30mm complete all as specified and directed. |
| 57 | S&F in repair SS auto hinge Soft Close, Rust Proof, on cupboard/ door/ window etc for panel thickness upto 20mm with screw and fixed, complete all as specified and as directed |
| 58 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished as in repair complete all as specified and as directed. |
| 59 | S&F Fancy type, Powder coated 20/25 mm dia of drapery rod fixed in position as in repair complete all as specified and as directed |
| 60 | S&F Bracket for fixing Fancy type,Chromium Plated 20mm dia curtain rod/ drapery rod etc as in repair complete all as specified and as directed. |
| 61 | M&L in repair 2nd class hardwood plain fillets square rectangular or triangular in section, wrought fixed with screws area exc. 3 Sqcm but n.exc 6 Sqcm complete all as specified and directed. |
| 62 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down old unserviceable PVC wall lining complete all as specified and as directed. |
| 63 | M&L for 18/19 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed. |
| 64 | M&L Prelaminated particle board 18/19mm thick as in cup board shutter and Shelf, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in repair complete all as specified and as directed. |
| 65 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 66 | S&F Mild steel TMT bars 6 ot 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (upto 04 storey High of building)complete all as specified and as directed. |
| 67 | M&L Mild steel TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed. |
| 68 | S&F Rolled mild steel in joist, channel, angle, or tee section fixed independently, without connecting plates, etc (cut to ordinary length ie. within 20mm of the length indicated) of FE-410- W(Gde-E-250) quality-B complete all as specified and as directed. |
| 69 | M&L Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde-E-165) quality A complete all as specified and directed. |
| 70 | S&F Mild steel Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming toFe-410-W (Gde-E- 250 quality -B) complete all as speci-fied and as directed. |
| 71 | M&L Mild steel Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 72 | M&L for Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 73 | M&L for Pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 74 | M&L for 10mm thick screed bed or bedding over roof surfaces when concrete is still green with including WPC in cement mortar 1:4 complete all as specified and directed. |
| 75 | Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed. |
| 76 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 77 | S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 78 | M&L 4mm thick suspended false ceiling HPSC (high pressure steam curved) pre-primered fibre cement non asbestous building board similar to E-Board Classic placed in a grid of size 605x605mm with aluminium powder coated angle/channel/tee section duly suspended with 4mm dia GI hanger fixed with GI hooks 4mm dia and fastner as required at the site including two coat of oil bound distemper complete all as specified and directed. Detail of section are as under:-(i) Aluminium Angle 25mm x 25mm x 1.5mmt thick.(ii) Aluminium Cross Tee 25mm x 25mm x 1.5mmt thick.(iii) Aluminium Main Tee 25mm x 38mm x 1.5mmt thick.Note:-The bidder quoted rate included for all straight, Raking or circular cutting, wastage on ceiling board |
| 79 | M&L Cement Concrete type D2(1:4:8) using 40mm graded crushed stone aggregate 75mm thick as in sub base of floor, foundation filling etc complete all as specified and as directed. |
| 80 | M&L for 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in sub-base, finished Concrete Surfaces Even and fair complete all as specified and directed |
| 81 | M&L for 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 82 | M&L Cement Concrete type B0 (1:2:4) (12.5mm graded aggregate) 25mm thick, in Flooring, finishing concrete surfaces even and smooth complete all as specified and as directed. |
| 83 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. |
| 84 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. |
| 85 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. |
| 86 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed. |
| 87 | M&L Glazed Ceramic Coloured Tile 450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed. |
| 88 | M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, including demolition old tiles complete all as specified and as directed. |
| 89 | M&L Rendering 15mm thick in Cement Mortar on fair faces of brick work or concrete surface of external wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 5 mm thick in cement morter (1:4) using water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately) |
| 90 | M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed |
| 91 | M&L rendering 10mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed |
| 92 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smooth without using extra cement complete all as specified and directed. |
| 93 | \"Supply only\" liquid water proofing compound (ISI marked) complete all as specified and directed.Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA/Icannano |
| 94 | M&L Applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier \"Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd\" or \"Hind Styrene BR of Hindcon Chemical Ltd\" or equivalent make of M/s Pidilite Industries @ 7 Litre per bag of cement complete finished even and smooth without using extra cement as per manufacturer\"s specification complete all as specified and directed. |
| 95 | M&L Preparing new Surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed. |
| 96 | M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1.5mm thick (appx) water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 97 | M&L Preparing new plastered surfaces of ceiling and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1.5mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 98 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1.5mm thick (appx) water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 99 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 100 | M&L complete removal of old decorated surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 101 | S&F Tinted glass with sheet glass 4.80mm thick , pin head type and glazing in squares exc 0.5 sq. M in each pane complete all as specified and as directed. |
| 102 | S&F in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. |
| 103 | M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Varnish (First quality), complete all as specified and as directed. |
| 104 | M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed. |
| 105 | M&L preparation of old painted steel surface over 10cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed. |
| 106 | M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed. |
| 107 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to four stories height of bldgs. complete as all specified and as directed. |
| 108 | S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to four stories height of bldgs. complete as all specified and as directed. |
| 109 | S&F 20mm bore brass MTA for CPVC pipe as complete all as specified and directed. |
| 110 | S&F 20mm bore brass FTA for CPVC pipe as complete all as specified and directed. |
| 111 | S&F 20mm bore brass elbow for CPVC pipe as complete all as specified and directed. |
| 112 | S&F 20mm bore brass Tee for CPVC pipe as complete all as specified and directed. |
| 113 | S&F 20mm bore dia CPVC Ball valves long handle screwed for CPVC pipe and fixed as complete all as specified and directed. |
| 114 | S&F single socketed PVC (SWR) pipe Type \"B\" 75mm bore with rubber ring joint any radius complete all as specified and directed. |
| 115 | S&F in repair single socketed PVC (SWR) pipe Type \"B\" 75mm bore with rubber ring joint any radius complete all as specified and directed. |
| 116 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), Type \"B\" single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 117 | S&F in repair PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), Type \"B\" single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 118 | S&F PVC (SWR) junction single (Double T) equal or unequal 110mm bore complete all as specified and directed. |
| 119 | S&F UPVC (SWR) Bend 75mm bore (dia), any type etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 120 | S&F UPVC (SWR) Bend 110mm bore (dia), any type etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 121 | S&F PVC (SWR) Nahani/Floor Trap 100mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement, including taking down old one complete all as specified and as directed. |
| 122 | S&F UPVC (SWR) 75mm bore cowls and Jointing with Solvent Cement complete all as specified and directed. |
| 123 | S&F UPVC (SWR) 75mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors and Jointing with Solvent Cement complete all as specified and directed. |
| 124 | S&F UPVC (SWR) 110mm bore Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors as in repair complete all as specified and directed. |
| 125 | S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed. |
| 126 | S&F 3-in-1 wall mixer for Hot & Cold water supply with telephonic shower arrarengement, brass chromium plated fancy type, screwed down for 15mm bore iron pipe incl necessary fittings & fixtures etc.as in repair complete all as specified and directed. |
| 127 | S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. |
| 128 | S&F Brass chromium plated fancy type pillar tap screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures complete all as specified & directed. |
| 129 | S&F Brass chromium plated fancy type pillar tap screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed. |
| 130 | S & F for chromium plated Bib taps for 15 mm bore pipe complete all as specified and directed. |
| 131 | S&F Brass chromium plated fancy type bib cock screwed for 15 mm bore of pipe etc. as in repair complete all as specified & directed. |
| 132 | S & F 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. |
| 133 | S & F in repair 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. |
| 134 | S & F for brass chromium plated two way bib tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed. |
| 135 | S & F for brass chromium plated two way bib tap with Wall Flange screwed for 15 mm bore pipe as in repair complete all as specified and directed. |
| 136 | S & F for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. |
| 137 | S & F in repair for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. |
| 138 | S&F ABS Body chrome plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 139 | S&F in repair ABS Body chrome plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 140 | S & F shower arm 240mm long round shape with flage including fixing to steel pipe or union complete all as specified and directed. |
| 141 | S&F 15mm bore stop valve, fancy type cast copper alloy, chromium plated , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 142 | S&F in repair 15mm bore stop valve, fancy type cast copper alloy, chromium plated , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 143 | S&F in repair Toilet paper holder of brass chromium plated fixed to walls with chromium plated brass screw including necessary fixing arrangement as in repair complete all as specified and directed. |
| 144 | S&F in repair 150mm dia Chromium plated grating fixed in position with white cement as in repair complete all as specified and directed. |
| 145 | S&F Stainless Steel Towel rail of size 15mm dia 600mm long decorative type fixed with walls including necessary fittings etc complete all as specified and as directed. |
| 146 | S&F in repair Stainless Steel Towel rail of size 15mm dia 600mm long decorative type fixed with walls including necessary fittings etc complete all as specified and as directed. |
| 147 | S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangement as in repair complete all as specified and directed |
| 148 | S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed. |
| 149 | S&F PVC bathroom cabinet box with mirror, shutter type of size 500X400 fixed on walls with wooden plugs and and chromium plated brass screw and cup washer as in repair complete all as specified & directed. |
| 150 | S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass self 19-12 cm wide, 60 cm long with chromium plated brackets guard and railing fixed in position with necessary fixing arrangement complete all as specified and directed. |
| 151 | S&F Glass corner shelf of single set with chromium plated brackets and railing including necessary fittings and fixture as in repair complete all as specified and directed. |
| 152 | S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers , complete all as specified and as directed. |
| 153 | S&F 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm for any type/make/size for stainless steel sinks, basins,urinal etc as in repair complete all as specified and directed. |
| 154 | S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with \"p\" or \"s\" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 155 | S&F for vitreous China urinal half stall type (back or cornerwall type) complete including providing & fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with & including 60mm long brass screw, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe ,grating and union for discharge pipe and including 40mm PTMT waste coupling with 32mm dia waste pipe and PTMT spreader (Exclusive of fixing supply pipe to flushing cistern ) ,complete all as specified and directed .. |
| 156 | Supply and fixing 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. |
| 157 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 158 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. |
| 159 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe and including PTMT Ball Valve 25mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, complete all as specified and as directed. |
| 160 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 2000Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe and including PTMT Ball Valve 25mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ballincluding Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 161 | M&L for 150mm dia Reinforced concrete pipes, class NP-3, laid and jointed with collars complete all as specified and directed. |
| 162 | M&L for Concrete bed Type C-2 (1:3:6) (Using 40mm graded crushed stone aggregate) to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed |
| 163 | Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, FTL fittings and making good to the disturbed surface complete all as directed by Eng-in-Charge. |
| 164 | M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including fabricated 1.6 mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps incl Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and as directed.Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. |
| 165 | All as per item No.164.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge. |
| 166 | All as per item No.164.00 here-in-before but one 3pin switch socket outlet 5A on independent board complete all as specified and directed by engineer incharge. |
| 167 | M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 2.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including fabricated 1.6 mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 2.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one Switch socket combination 15 amps incl Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and as directed. |
| 168 | M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.. |
| 169 | All as per item No. 168.00 here-in-before but one 3pin switch socket outlet 5A on independent board complete all as specified and directed by engineer incharge. |
| 170 | S&F Switch piano, flush type, SP, one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed. |
| 171 | S&F Switch socket combination multipurpose 2 in 1, 5 pin 6 Amps 230/240 volt flush type complete all as specified and as directed. |
| 172 | S&F Socket outlet 3/5 pin, 6 Amps, 240 volt flush type complete all as specified and as directed. |
| 173 | S&F Switch socket combination multipurpose 2 in 1, 6 pin 15 Amps 230/240 volt flush type complete all as specified and as directed. |
| 174 | S&F Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. |
| 175 | S&F bell push flush type 5 Amps 230V complete all as specified and directed by Engineer-in-Charge. |
| 176 | S&F call bell, ding dong AC 230 volt single pole (ding dong type) complete all as specified and directed by Engineer-in-Charge. |
| 177 | Supply and fixing ceiling Fan regulator step type 240 Volt complete all as specified and directed by the Engr-in-Charge. |
| 178 | S&F 9W LED bulb, 6500k, PF>0.9, CRI>80 lumen efficacy warmlight/ natural white alongwith PVC Lamp holder complete all as specified and directed by the Engr-in-Charge. |
| 179 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 180 | S&F Energy efficient LED fittings of capacity 1 x 10W suspended type / wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed. |
| 181 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 182 | S&F building security light pressure die cast housing with individual LEDs with modular secondary optics security light luminaires 35 watt LED with 50mm dia light grade GI pipe bent to shape of 45\"\" 1.5 mtr long and nuts bolts including fixing arrangement after taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 183 | Taking down unserviceable rusted / damaged MCB DBs of any type including MCBs and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed. |
| 184 | S&F Sheet metal enclosure for DB\"s when MCBs to be used 2 way single pole and neutral double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 185 | S&F Sheet metal enclosure for DB\"s when MCBs to be used 4 way SPN double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 186 | S&F Sheet metal enclosure for DB\"s when MCBs to be used 8 way SPN double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 187 | S&F Sheet metal enclosure for DB\"s when MCBs to be used 4 way TPN double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 188 | S&F MCB 6 to 32 Amps, SP, 240 Volts , \"C\" curve breaking capacity 10 kA complete all as specified and as directed. |
| 189 | S&F MCB 6 to 32 Amps, DP, 240 Volts , \"C\" curve breaking capacity 10 kA complete all as specified and as directed. |
| 190 | S&F MCB 40 to 63 Amps, TPN 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed. |
| 191 | Taking down aluminimum sub mainwiring alongwith dameged casing capping /PVC conduit pipe from the wall roof or in floor and making good disturbuted surfaces complee all as directed |
| 192 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 2.5 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 2.5 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 25 mm dia including all fittings complete all as specified and as directed.Note:- Two runs of 2.5 Sqmm conductor as main wire and one run of 2.5 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. |
| 193 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 25 mm dia including all fittings complete all as specified and as directed.Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. |
| 194 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 6.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 25 mm dia including all fittings complete all as specified and as directed.Note:- Two runs of 6 Sqmm conductor as main wire and one run of 6 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. |
| 195 | Taking down and opening out the ceiling fan/wall mounted upto1400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots complete including materials like split pin,rubber reel etc reassembling and refixing of fan complete including if any S required for fixing fan and incl 1.5 mtr length connecting rod all as specified and as directed. Note : Spare parts shall be measured & paid separately. |
| 196 | M&L for Rewinding of ceiling or wall mounted fan motor with super enamelled copper winding wire of suitable size & varnishing including testing of fan after rewinding complete all as specified and directed by Engineer-in-charge. |
| 197 | Supply only ball bearing suitable for 1200/1400mm sweep Ceiling fan as per existing one complete. |
| 198 | Supply only capacitor of 2.5 mfd for Ceiling fan as per existing one complete. |
| 199 | M&L for painting of ceiling fan/wall fan/exhaust fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc complete all as specified and directed by Engineer-in-charge. |
| 200 | Supplying and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with all the connection as directed. |
| 201 | Supply and fix Wall fan Plastic body of min 400m sweep 240V, 50hz,min 1350RPM,100CMM air delivery complete all as specified and as directed. |
| 202 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete with all the connection as directed. |
| 203 | Supply and fix Mild Steel Louver for existing exhaust fan of suitable size and type including taking down old one complete with all the connection as directed. |
| 204 | Taking down and refixing of electric water heater storage type of any capacity in same position or other position and connection complete all as specified and directed |
| 205 | Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, wire projected by 15 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. |
| 206 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 2 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 207 | Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge.Note:- Thickness after punning down shall be measured for payment. |
| 208 | Supply and laying in trenches, sub class \"B\" over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge. |
| 209 | Materials and Labour Cutting existing road / path etc for taking out cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 ( 1:3:6,) using 40mm graded crushed stone aggregates) of suitable depth complete all as directed by Engineer-in-Charge. |
| 210 | M&L for 25mm bore GI tubes light grade for cable protection with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed. |
| 211 | Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed. |
| 212 | Supply and Laying Steel Water Tubing 50mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed. |
| 213 | Supply and fix in repair Gun metal, globe or gate valves (ISI marked) ( Class-I) with iron wheel head, screwed both ends for 25 mm bore GI pipe complete as specified and as directed |
| 214 | Supply and fix in repair Gun metal, globe or gate valves (ISI marked) ( Class-I) with iron wheel head, screwed both ends for 50 mm bore GI pipe complete as specified and as directed |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
