|
| 1 | Dismantling AC/ CGI/ translucent ( corrugated, semicorrugated,etc),as in roof covering complete. |
| 2 | Dismantling of timber scantling 40 Sqcm and over in section in any position complete. |
| 3 | M&LSecond class hard-wood in timber framedscantling Clean swan fixed in repair,to replace old and decayed timber (including piecing scarfing,etc,of old and new timber if required)and removing defective portions to store etc complete all as spd & directed. |
| 4 | M&L for MS flat (wind tie) as roofsheet securingincl distance pieces, cleatsetc complete all as spd & directed. |
| 5 | S&F 50mm continuous line machine Roof Puf Panel, crest height 35 mm, PPGI sheet having top & bottom sheet thickness not less than 0.5mm, high efficiency insulating materials with a core density of 40+2 Kg/m3, colour top red, Bottom off white fixed with as per manufacturer instruction complete all as specified and directed.Make : JSW/ JINDAL/ TATA |
| 6 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 7 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etcwith self tapping screws or J hooks as specified. |
| 8 | Dismantling of wall/ceiling boards(fibre, pulp, insulation, etc) of any type including cover fillets. |
| 9 | M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer\"scomplete all as specified. |
| 10 | M&L 4mm thicknon asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws. |
| 11 | Description all as per ser item No 10 above but expect material only all as specified and directed |
| 12 | Taking down cementplaster any description on brick or stone walls etc including rakingout joints, hacking for key, scrubbing down with wateretc |
| 13 | M & L rendering 10 mm thick in cement mortar 1:4 on wall/chajjas/lintel etc and finished even and fair without using extra cement in patches. |
| 14 | M & L rendering 15 mm thick in CM 1:6 inon surface of walls and finished even and fair (without using extra cement) in patches. |
| 15 | M & L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted overa coat of chalk whiting, complete all as specified & directed |
| 16 | M & L for complete removal of existing surfaceof walls of any description by washing, rubbing down and applying two coat of apex paint over a coat of cement primer complete as specified and directed. |
| 17 | Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete. |
| 18 | M&L preparating surfaces of wood and wood based materials new or old ,of any description and girth,not otherwise described and treated with two coat of creosote oil complete all as spd and directed |
| 19 | Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete. |
| 20 | M&L brick work with sub class \"B\" brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete. |
| 22 | M&L for 9-10mm thick Light coloured vitrified ceramic tiles of sizein floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed. |
| 23 | Description all as per ser item No 22 above but as in Skirting with 10mm thick rendering in CM 1:3 |
