|
| 1 | Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed. |
| 2 | M & L Non - skid Ceramic colouredtiles 7 to 8 mm thick area of each tileexceeding 0.18 sqm but not exceeding 0.38 sqm, in floors /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match including screed bed 15mm thick in CM 1:6 etc complete all as directed. (Note : Work to be carried out in patches as required on site ). |
| 3 | All as per Sl item No 2 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 4 | M & L for joint free non skid ceramic coloured tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6or with chemical cement to match all as directed.(Note : Work to be carried out in patches as required on site ). |
| 5 | M&L for joint free glazed ceramic colouredtiles in vertical surface of size 300X 600X 7mm / 300 x450x7 mmthick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to matchetc complete all as directed and specified. (Note : Work to be carried out in patches as required on site ). |
| 6 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
| 7 | M&L for cementconcrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, orchajja coping orsimilar works including formwork complete all as specified and directed. |
| 8 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed. |
| 9 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protectionfinished even and fair and laid in alternate bays complete all as specified and directed. |
| 10 | M&L for Granite work(of any type) first quality Z black 20 mm thick(table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 11 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 12 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincluding screed bed 15mm thick in CM (1:6) complete all as specified and as directed.(Note : Work to be carried out in patches as required on site ). |
| 13 | All as per item Noabove,but as in skirtingover 10mm thick backing coat in CM (1:4). (Note : Work to be carried out in patches as required on site ). |
| 14 | M & L for Machine cut cudappa stone slab 18-20 mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.(Note : Work to be carried out in patches as required on site ). |
| 15 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples/wooden beading etc in steel or wooden windows complete all as specified and as directed. and directed. |
| 16 | Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed. |
| 17 | S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed. |
| 18 | M & L for 4mm thick non asbestos fibre cement building boards of make \"E board classic designer board(Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed. |
| 19 | S&Fin repairs 5 to 8 mm thickinterlocking PVC hollow wall panelling fixed with self tapping screw of approved colour and design complete all as specified and directed by Engr-in-Charge incl dismantling of old unserviceable board any type . |
| 20 | S&F for 0.50mm thick GI channel sheet of width 35-45mm for wall panelling channel inclusive of fixing on to wall to make level complete all as specified and directed. |
| 21 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each incl repair of door jams and cills etc complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each incl repair of door/window jams and cills etc complete all as specified and directed. |
| 23 | Taking down shuttersexc 1.00 sq. m but n exc 2.00 sq m each complete all as specified and directed. |
| 24 | S&F 2nd class wood glazed & skeletonshutter 35mm thick factory madeopen rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) including complete all as specified and as directed. |
| 25 | S&F stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed. |
| 26 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 27 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 28 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 29 | M & L Pressed steel frames for doors with one or more rebates of size 105 mmx 60 mmincluding necessary fixing lugs, hinges, lock strike plate, MS flat Hold fast incl filling of PCC 1:2:4, type B-0 ( graded stone agg )etc., as in back side of chowkats including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete, all as specified and directed. |
| 30 | M & L Pressed steel frames for doors with doublerebates of size 125 mmx 60 mmincluding necessary fixing lugs, hinges, lock strike plate, MS flat iron Hold fast incl filling of PCC 1:2:4, type B-0 ( graded stone agg )etc., as in back side of chowkats including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete, all as specified and directed. |
| 31 | M & L for rolled mild steel work angle ironas in door frame (Chowkhats) confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 32 | S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed. |
| 33 | M&L for preparation ofsteel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 34 | S&F 30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 35 | Providing and fixing factory made single extruded WPC (Wood polymer composite) 100 % solid decorative both side flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder, rick husk, wheat husk) and on toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 36 | S&F 30 mm thick moulded Prelaminated bothside WPC factory made 100% solid Glazed and skelton shutterdoor (conforming as per IS-4020) made from 100% lead free single extruded WPC incl WPC extruded board CNC machine cut jalifixed to Skelton door as per approveddesign complete all as specified and directed incl SS wirenetting nominal dia of wire 1.40mm andsize of mesh 12mm and fixed with stainless steel wire stapples complete all as specified and directed with wood grain texture both side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 37 | S&F for 35mm thick factory made flush shutter, solid core construction, with block board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. |
| 38 | S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India |
| 39 | S&F for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, anodised aluminium snap beading, screws etc, complete all as specified and as directed. |
| 40 | M&L for 4mm thick tinted sheet glass, ordinary quality and fixed with glazing clips for aluminium/MS windows etc in each pane complete all as specified and as directed. |
| 41 | M&L for in repairs Prelaminated particle board of 9mm thick, interior grade prelaminated both sides with decorative choice laminations with teak wood leaping fixed with screws as in cupboard shutters, bed room, kitchen, aluminium partition andinternal shelves complete all as specified. |
| 42 | S&F powder coated aluminium sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkhats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and stainless steel wire loth 0.36mm nominal dia of wire andaverage width of aperature 1.20mm, size ofside rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.20mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed. |
| 43 | S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick frosted glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 44 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0all as specified and as directed. |
| 45 | S & F in repair Door closer hydraulically regulated aluminium die cast body universal type suitable for 851 to 1000 mm in width and weight between 61 to 80 kg complete all as spd and directed. |
| 46 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size paneand fixed all as specified incl hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed any height incl necessary sacfolding complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed |
| 48 | M & Lfor fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc forModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved qualityincluding paste to all exposed edge byedge Binding Tape to match the colour of boardincluding provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 49 | M & Lfor Fabrication & fixing to front side /all exposed sides ofModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR UV, glossy finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 50 | S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter/shelf/ of 18 mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixedas in cupboard/shelf/kitchen shelf etc . The thickness of shutter is edges painted by matching colour of PVC lining ofprelim coloured PVC sheet using etc incl dismantling/taking out old unsv board any type and fixed in any position complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan |
| 51 | S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter/shelf/ of 18 mm thickness both side plain consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixedas in cupboard/shelf/kitchen shelf etc . The thickness of shutter is edges painted by matching colour of PVC lining ofplaincoloured PVC sheet using etc incl dismantling/taking out old unsv board any type and fixed in any positioncomplete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan |
| 52 | S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele |
| 53 | S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly |
| 54 | S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.Make :Hettich, Hafele, Butterfly |
| 55 | S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly |
| 56 | S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.Make : Hettich, Hafele, Butterfly |
| 57 | S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by engineer- in - charge. Make : Hettich, Hafele, Butterfly |
| 58 | S & Fchrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.” Make : Hettich, Hafele, Butterfly |
| 59 | S&F width of flaps (When open) in 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised. |
| 60 | S&F Hasp and staple, safety type,brass with mild steel hinge pinincluding bolt to hinge plate and fixed with screws 125mm size. |
| 61 | S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified. |
| 62 | S&F for brass knobs 35-40mm dia complete all as specified. |
| 63 | S&F 100 mm long butt hinges stainless steel medium weight complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. |
| 64 | S&F brass floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed. |
| 65 | S&F 150 mm long stainless steel handles designer type, fabricated type polished complete all as specified and as directed. |
| 66 | S&F 150 mm long Extruded Aluminium alloy handlescomplete all as specified and as directed. |
| 67 | S&F 100 mm long Extruded Aluminium alloy handlescomplete all as specified and as directed. |
| 68 | S&F 100 mm long Extruded stanless steel handles designer type, fabricated type polished complete all as specified and as directed. |
| 69 | S&F 75 mm long stainless steelhandles designer type, fabricated type polished complete all as specified and as directed. |
| 70 | S&F 100 mm size stainless steel barrel tower bolts, with cast or sheet barrel and rolled orcast bolts and fixed complete all as specified and as directed. |
| 71 | S&F 150mm long Aluminium barrel tower bolts, with cast or sheet barrel and rolled orcast bolts and fixed complete all as specified and as directed. |
| 72 | S&F 100mm size Aluminium barrel tower bolts, with cast or sheet barrel and rolled orcast bolts and fixed complete all as specified and as directed. |
| 73 | M&L for 250mm long stainless steel , sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing boltwith rolled or drawn brass bolts and fixed complete all as specified and as directed. |
| 74 | M&L for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 75 | S&F in repair 25mm dia stainless steel curtain rod complete all as specified. |
| 76 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 510mm bowl size 460x460x230mm, complete all as specified and directed. |
| 77 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling andwaste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. |
| 78 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc completeall as directed. |
| 79 | Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 80 | M&L for 10 mm thick rendering in cement mortar 1:6 on fair face of brick walls/concrete surfaces and finished even and smooth without using extra cement in any position complete all as specified and as directed. |
| 81 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair face of brick walls/concrete surfaces and finished even and smooth without using extra cement in any position including scafolding etc, complete all as specified and as directed. |
| 82 | Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 83 | M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed. |
| 84 | Ditto all as per above but except bricks. |
| 85 | M&L for preparation of new surfaces and applying 02 coats of exterior emulsion paint (light shade)@ 4.65 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 8.35 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 86 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint colour approved by GE over a coat of primerincluding water curing before and after on painted surfaces of cement base paint and all scaffolding of any height of bldg complete all as specified and directed. |
| 87 | M & L for applying two coats of acrylic distemper (any tint)@ 8.35 sq.m/litre/2 coats by using roller to already wall putty prepared surfaces & including a coat of interior wall primer @ 10 sq.m/litre complete all as specified and directed. |
| 88 | M&L for applying 1.5mm thick cement wall care putty on wall/ceiling/RCC new or old surfaces of any description includding sanding and rubbing completeall as specified and as directed. |
| 89 | M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. |
| 90 | M&L for preparation of New untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 91 | S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 92 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. |
| 93 | Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified. |
| 94 | Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified. |
| 95 | Dismantling unframed work of timber scantlings 40 sqcm and over in any section, in any position complete all as specified. |
| 96 | M & L forClean sawn 2 nd class hard wood in scantling as a post and rafter, purlins etc complete all as specified. |
| 97 | S & Ffor steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified. |
| 98 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified incl filling of gaps between wall and sheet with PCC 1:2:4 ( 20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required cost of the same shall be deemed to be included in quoted rate completeall as specified and directed. |
| 99 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 100 | S & F stainless steel L button for kitchen cabinet and cup board shelf and fixed with SS star headed screw complete all as spd and directed. |
| 101 | S&F Stainless steel Z type hinges 100 mm longmedium weight fixed with SS star headed screw complete all as spd and directed as in Kitchen cabinet cupboardshutters all as spd and directed. |
| 102 | S&F in repair 4mm thick aluminium composit panel (ACP) wooden/metalic coloured as approved by GE etc with complete fitting and fixturesincluding MS frame workof hollow section of size 25 mm x 40 mm and 1.60 to 2.00 mm thick fixed incl all fixing arrangements at any height fixedall as specified anddirected all design and pattern as approved by Engineer in charge incl Filling of groove with silicon compound complete all as spd and directed.( Areaof each pannel should not be more than 0.60 Sqm Each). Note : Cost of MS frame work ,filling of Silicon and all material required for finished the work deemed to be included in the quated rates. |
| 103 | S&F 18 mm thick Plywood BWR type BB, fixed with screws to timber frame work all as specified and directed. |
| 104 | M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per maker\"s instruction, 0.9mm thick laminate |
| 105 | S&Fextruded Brass handles, fabricated type polished 150 mmcomplete all as specified. |
| 106 | S&F brass , barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed200 mm complete all as specified. |
| 107 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 250mm complete all as specified. |
| 108 | S&F floor door stpper of brass , bodyand tongue with hard drawn steel spring 140mm overaii length of cover plate complete all as specified. |
| 109 | S&F SS heavy duty decorative brackets/wall to wall bracket (in pairs) suitable for 25mm dia curtain rod (minimum projection from wall 100 mm) fixed in wall including drilling, rawl plug, star screws complete all as specified and directed.Note: Curtain rod and decorative funnels shall be measured and paid separately |
| 110 | S&F SS heavy duty decorative side funnels (in pairs) etcsuitable for 25mm dia curtain rod complete all as specified and directed.Note: Curtain rod and decorative brackets shall be measured and paid separately |
| 111 | S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele |
| 112 | M&L for precast cement concrete interlocking tiles 60mm thick Rouber moulded, prepolished with strength 35 N/Sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 113 | Note: Amount of sch of credit of Rs.129595/-will be deducted from total amount of BOQ. |
