|
| 1 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified & directed. |
| 2 | Material and labour for brick work with FLY ASH BRICKS (As per IS-13757 : 1993),burntfly ash building bricks, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Material and labour for brick work with FLY ASH BRICKS (As per IS-13757 : 1993), burnt clay fly ash building bricks, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed. |
| 4 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 5 | Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick/fly ashmasonry or concrete surfaces of walls complete all as specified. |
| 6 | Material and labour for rendering 15mm thick in two layer in CM 1:4 with water proof compound on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cementcomplete all as specified.Note : Water proofing compound shall be measured and paid for seperately. |
| 7 | Material and labour for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified. |
| 8 | Material and labour for preparation of new plastered surfaces of walls/ceiling apply distempering 2 coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmshould be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make -Asian Paints Royal(5 years product warranty) orNerolac(5 years product warranty)/ Asian Paints Royal(5 years product warranty)/ Berger(5 years product warranty) |
| 9 | Material and labour for preparation of complete removal of existing surfaces of walls/ceiling apply distempering 2 or more coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmshould be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make -Asian Paints Royal(5 years product warranty) orNerolac(5 years product warranty)/ Asian Paints Royal(5 years product warranty)/ Berger(5 years product warranty) |
| 10 | Material & Labour for preparation of new plastered surfaces applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces.Make - Nerolac Excel Top guard (5 years product warranty)/ Asian Paints Ultima Protek (5 years product warranty)/ Berger weather coat long life 5 (5 years product warranty) |
| 11 | Material & Labour for preparation of complete removal of existing surfaces applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces.Make - Nerolac Excel Top guard (5 years product warranty)/ Asian Paints Ultima Protek (5 years product warranty)/ Berger weather coat long life 5 (5 years product warranty) |
| 12 | Material and labour for exterior or interior waterproof/weather proof cement based1 mm thick putty @ 1 Kg(undiluted) per sq mtr. onnew plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. |
| 13 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified. |
| 14 | Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified. |
| 15 | Supply and fixing galvanised iron tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Supply and fixing galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | Supply and fixing in repairs PVC connection of 15mm bore with2 Nos. PTMT nuts, 60m long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. |
| 18 | Supply and fixing in repairfancy typeStop/Angle valves, 15mm bore cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Make Jaguar/ Roca/Kohler/ or Eqivalent |
| 19 | Supply and fixing in repair 20mm bore Stop valves, cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions fixed Make Jaguar/ Roca/Kohler or Eqivalent |
| 20 | Supply and fixing ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm diacomplete all as specified & directed by Engr-in-Charge |
| 21 | Taking down shutter of any description exceeding 1 Square Metre and not exceeding 2 Square Metre each complete all as specified and as directed. |
| 22 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and as directed. |
| 23 | Supply and fixing factory made, 35 mm thick IInd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkatsNote : door shutter width not exc 0.85mwith single shutter each door but door shutter width exc 0.85m two panel shutter each doorwithout any extra cost. |
| 24 | Material and labour for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as specified and directed by Engr-in-Charge. |
| 25 | Material and labour for preparing of newuntreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified. |
| 26 | Dismantling wrought iron or mild steelwork of any description not otherwiseprovided for partision. |
| 27 | Material and labour for for Framed work Fe -410-W(Gde-E-250)as in Stairs,gate, doorof angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/wallsin PCC 1:2:4 type B-0 to match the existing floors/walls complete all as specified and directed. |
| 28 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 29 | Supply and fixing 18/19mm thick High Density High Moisture Resistant board (HDHMR), ISI marked, Prelaminated both sides as in Controller\"s Desk ,palmed boxes,showcase,shutters of Cup Boards etc including 6mm designing teak wood beading on edges complete all as specified and as directed by Engr-in-Charge. |
| 30 | Supply and fixing 100 mm extruded brass handles, fabricated type polished complete all as specified & directed by Engr-in-Charge. |
| 31 | Supply and fixing 65mm longMortice latch with two levers (vertical type), mild steel body and fixed complete all as specified. |
| 32 | Supply and fixing Width of flaps (when open) 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engr-in-Charge. |
| 33 | Material and labour for clamps , hold fasts; wall ties, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts plate washers and similar small articles conforming to Fe-290 Gde-E-165 ® as directed by Engr-in-Charge. |
| 34 | Supply and fixing stainless steelhinges 100mm long medium weight, ISI markedto pressed steel/angle iron frames by welding/screws all as specified. |
| 35 | Supply and fixing fancy type stainless steel handles 150mm size fabricated type anodised, ISI marked complete all as specified. |
| 36 | Supply and fixing 300mm stainless steel, anodised, sliding door bolt with hasp ,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 37 | Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified. |
| 38 | Supply and fixinging anodized aluminium frame with power coating (minimumthickness 50 micron) and other sections for doors, windows, ventilators, partitions,with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 39 | Supply and fixinging anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimumthickness 50 micron)including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. |
| 40 | Supply only 5mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each paneall as specified and directed by Engr-in-Charge |
| 41 | Dismantling of wall and ceiling boards with grid (fibre, pulp, insulation etc) of any thickness complete all as specified and directed. |
| 42 | Material and labour for false ceiling made out of E-board classic of size 595 x 595 x 4 mm thick, (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions all as directedand specified. |
| 43 | Material and labour for GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c(Size of grid 605 x 605mm)complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fixing in repairsstainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed. |
| 45 | Material and labour for painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces. |
| 46 | Dismantling water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified & directed by Engr-in-Charge. |
| 47 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I. |
| 48 | Material and labour for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m |
| 49 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge. |
| 50 | Material and labour for for 75 mm thick PCC 1:3:6 type C2 using 20 mm graded stone aggregate as inplinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. |
| 51 | Supply and fixing in repairs looking mirror 600x450mm bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washeres and as directed. |
| 52 | Dismentling floor , hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises complete alla s specified and directed. |
| 53 | Material and labour for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. |
| 54 | Material and labour for for double charge vitrified ceramic tiles8 to 9mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed. |
| 55 | Material and labour for machine cut kota stone slab flooring 20mm - 25mm thick (size not less than 550mm x 550mm) as in flooring, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish laid over & including screed bed / bedding layer of 15mm thick in cement mortar 1:4, complete all as specified & directed |
| 56 | Material and labour for machine cut kota stone slab 20mm - 25mm thick (size compatible to floor) as in vertical surfaces (skirting, dado, riser, steps), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish laid over & including rendering plaster or backing coat of 15mm thick cement mortar 1:4, complete all as specified & directed. |
| 57 | Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeincl 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 58 | Demolition of reinforced cement concrete in any description and any position not other wise provided complete all as specified and directed. |
| 59 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;, Rough finished surfacesof concretec flat complete all as specified and directed by Engr-in-Charge. |
| 60 | Material and labour for Reinforced cement concrete M-20 (nominal mix) as inSlabs/chajjas supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.Note :- Reinforcement shall be measured and paid for separately. |
| 61 | Material and labour for Mild steelTMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to TMT bar complete all as specified and directed by Engr-in-Charge. |
| 62 | Supply and fixing FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for Wadrobe, Cupboard and Almirah Door. (SS MAT)with Mounting Screw complete all as specified |
| 63 | Supply and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor orthe side of waist slab with suitable arrangement reqired size complete all as specified and directed. |
| 64 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators,socket outlet but excludingtube light fittings, calling bell etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etccomplete all as specified and as directed by the Engineer-in-Charge. |
| 65 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 25 mm dia with accessories, concealed on wall surfaces and on surface on ceiling surfacesand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new covered plate over sunken box for housing themodular switches , modular socket outlets,modularfan regulators etc. and making smooth the disturbed surfaces as per existingfor one light/fan/exhaust fan point controlledby one way switch,complete all as specified and as directedby Engineer-in-Charge. Note :-a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid forseparately . |
| 66 | Description same all as per item No. 88here-in-abovebut for One 3 pin, 5 Amps, socket outlet controlled by one switch on independent board,complete all as specified and as directedby Engineer-in-Charge. |
| 67 | Description same allas per item No.88 here-in-abovebut for One 3 pin 5 Amps socket outlet controlled by one switch on same board,complete all as specified and as directedby Engineer-in-Charge. |
| 68 | Description same all as per srl item No 88 here-in-before but for one socket outlet 15 Amp with 2.5 sqmm PVC insulated, unsheathedcable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.5 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copperwire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge. |
| 69 | Supply and fixingmodular socket outlet2/3 pin, 6 Amp, one way, two module, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 70 | Supply and fixingmodular socket outlet2/3 pin, 16 Amp, one way, two module, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 71 | Supply and fixing modular switch 1 module, single pole, one way 6 Amps flush type, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 72 | Supply and fixing modular switch 1 module, single pole, one way 16 Amps flush type, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 73 | Supply and fix environment friendly recessed/pendent mounting 35/36 watt LED flat panel 2\" x 2\", fabricated out of CRCA sheet duly powder coated, housing cool white with high eficient LEDs and glare free, opal diffuser PF > 0.95, lumen efficancy> 100 Im/W, THD < 10% operating range 220v to 240 V, CRI >80, colour tempreature 6500/3500 K (as required) including connection with existing wire complete including all accessories all as specified and directed. |
| 74 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminalcomplete all as specified and as directedby Engineer-in-Charge. |
| 75 | Supply and fix wall mounting fan, 230 Volts, single phase, 400 mm sweep including connection complete all as specified. |
| 76 | Supply and fixing indoor decorative LED tube light fitting Batten type 1x18/20 Wwith opal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz and including 1x18/20 W LED tube rod luminaries (Warm/Cool as per site requirement) environment friendly, high efficient, T8 with aluminium extrusion heat sinkconnecting with copper conductor flexible cablefrom ceiling rose to connector of the lightcomplete all as specified and as directed by the Engineer-in-Charge. |
| 77 | Supply and fix LED based, bed side focus lamp, wall mounted for reading purpose, 7 watt, 220 Volts, AC, warm white and adjustable hesd including driver and all accessories including connection complete all as specified. |
| 78 | Supply and fix LED based, table lamp upto & including7 watt LED bulb with B22 holder, 220 Volts, AC,including all accessories complete all as specified. |
| 79 | Supply and fixing sheet metal MCB DBs 8 way with 200 Amps rated bus bar single pole and neutralIP-43 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surface after removing old Unserviceable MCB DB complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | Supply and fixing MCB single pole, 240 volt, 6 to 32 amps, 10 KA \"B\" curvecomplete all as specified and as directedby Engineer-in-Charge. |
| 81 | Supply and fixing MCB SPN, 240 volt, 40 TO 63 amps, 12 KA \"B\" curvecomplete all as specified and as directedby Engineer-in-Charge. |
| 82 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised iron wireearth lead of 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron, earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion . |
| 83 | Supply and fixingearth continuity conductor nor main earthing lead of 4.00 mm galvanised iron wire, burried in ground or fixed on wall in and including 15 mm bore GI pipe medium grade fro protection of earth wire complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | Taking down ceiling fan of any size, dismantling blades and removing fan and blades to store yard of MES complete all as specified and as directed by the Engineer-in-Charge. |
| 85 | For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted in total quoted amount of BOQ to arrive contract sum. |
