|
| 1 | M & L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of white wash on wall complete all as specified and as directed |
| 2 | M & L for Preparation of old decorated surfaces of ceiling, cornices etc including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of white wash on ceiling complete all as specified and as directed |
| 3 | M & L for applying one coat of acrylic distempter on old treated surfaces of any walls including preparation of surface by washing, rubbing down and stooping of distempered surfaces all as specified and as directed |
| 4 | M & L for complete removal of existing treatement on surfaces of wall including preparation of old surfaces, applying wall care putty on the surfaces of walls, making surface even smooth finish by rubbing with sand paper of different grade etc and applying one coat of alkali resistant primer and two coat of oil bound distemper complete all as specified and as directed |
| 5 | M & L for applying two coat of acrylic distempter on old treated surfaces of any walls including preparation of surface by washing, rubbing down and stooping of distempered surfaces all as specified and as directed |
| 6 | Taking down cement plaster of any descreption and in any position of brick or concrete surfaces & racking out joints hacking for key, scrubbing down with water etc all as specified and directed |
| 7 | M&L Rendering 10mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces on wall finished even and smooth without using extra cement |
| 8 | M&L for rendering to soffit of RCC slab& ceiling , etc. 5 mm thick in cement mortar 1:3 finished even & fair without using extra cement complete all as specified and as directed. |
| 9 | M&L for 15 mm thick rendering in cement mortar 1:4 on brick work surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly. |
| 10 | Supply only integral water proofing compound complete all as specified and as directed. |
| 11 | M&L for preparation of new surfaces of walls and applying with whiteputty and making the surface to an even &smooth finish,rubbing with sand paper of different grade etc andapplying two coats ofOil bounddistermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved. |
| 12 | M&L Preparation of new surfaces of plastered surfaces of wall and applying two coats of white wash on celling complete all as specified and as directed. |
| 13 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 14 | M&L for preparation of old surfaces of external walls andapplying one coat of Wheather coating external emulsionby the approved applicator of the manufacturer of the paint complete all as specified and as directed. |
| 15 | M&L for cleaning of external grid surface with dilute hydrocholoric acid with water (mixing ratio of 1 : 4) through plastic brush including necessary scaffolding all as specified and directed. |
| 16 | M& L for writing letters or figures (Block,Roman,Itlain or Indian) n.exc 30 cm height all as specified and as directed. |
| 17 | M & L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 Cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and as directed |
| 18 | All as per item No 17 above but on steel surfaces all as specified and as directed |
| 19 | S & F in repairs plastic water closet seat cover (white) for pedestal pan, closed pattern with flat bottom and cover and mild steel chromium plated hinging device all as specified and as directed |
| 20 | S & F in repair 450 mm x 600mm looking mirror 5.5 mm thick glass, beveled edge finishing includings studs and necessary fittings all as specified and as directed |
| 21 | S & F in repairSink mixer with regular spout Table mountedall as specified and as directed |
| 22 | S & F in repairSink mixer with regular wall mounted all as specified and as directed |
| 23 | S & F in repairWaste coupling 32 mm, all as specified and as directed |
| 24 | S & F in repairWaste coupling 40 mm, all as specified and as directed |
| 25 | S & F in repairFull glass shelf 450 mm (18\") all as specified and as directed |
| 26 | S & F in repairs Health faucet, brass, chromium plated, with (ABS body) 1.2 mm long 15mm bore chrome finish flexible pipe and wall hook fixed in repair complete all as specified and directed. |
| 27 | S & F in repairs Bib taps, brass, chromium plated, fancy type, (straight line model) CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs all as specified and as directed. |
| 28 | S & F in repairs Wall mixer 3 in 1 system with provision for both hand shower complete with 115 mm long bend pipe, connection legs & wall glange (without hand & overhead shower) all as specified and as directed. |
| 29 | S & F PVC connection 15mm size with PT MT length 600 mmall as specified and as directed Make- WaterTEC. |
| 30 | S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair (25 mm bore) |
| 31 | S&F 20 mm bore dia aluminium anolised tubular towel rail, curtain rod etc. |
| 32 | S/F in repairs low density polyethelene pipes (LDFE) of pr.Rating 6 Kgs/Sqm fixed complete to walls 40mm bore. |
| 33 | S&F Harrison rails mild steel, chromium plated with fixing brackets in repairs all as specified and as directed |
| 34 | Refixing and cleaning of Harrison rails mild steel, chromium plated with fixing bracketsall as specified and as directed |
| 35 | Taking down shutters of any description exceeding1 Sq. m but not exceeding 2 Sq. m each complete all as specified anddirected |
| 36 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm & n. exc. 2.00 Sqm each. |
| 37 | Taking down door/ window chowkats orframe with shutter (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specifiedand as directed. |
| 38 | S&F Second Class hard wood clean and sawn plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified anddirected |
| 39 | S & F MS work as in hold fast etc confirming (Fe-410-0 or Fe-310-0) complete all as specified and as directed |
| 40 | M&L for PCC (1:3:6) Type C1(using 20 mm graded stone aggregates) as in hols fast, PCC Bed blocks in finished all exposed surfaces of concrete including necessary form work complete all as specified anddirected by Engr in charge |
| 41 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening as per specification and drawing |
| 42 | Factory made solidpanel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitabele PVC sheet beading and joined together with solvent cement suppling and fixing in the frame at site as per specification and drawing,complete, all as specified. |
| 43 | S&F Second class hard wood 35mm thick plain, framed, panelled door Shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneeres:supplied and fitted to chowkats etc complete all as specified. |
| 44 | S&F Second class Hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge etc (without sash bar) edges of framing plain, charmfered or rounded. fitted with cut and mitred beads for securing glass, etc. ; sizes of members of shutters as specified in SSr part I, section 8 clause 8.24 (a) supplied and fitted to Chowkets complete. |
| 45 | S & F Aluminium anodized barrel tower bolts of extruded section 200mm all as specified and as directed |
| 46 | S & F Aluminium anodized handles cast type 150mm long all as specified and as directed |
| 47 | S &F MS Butt hinges medium weight cold rolled & fixed 100mm long all as specified and as directed |
| 48 | S & F Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long all as specified and as directed |
| 49 | S&F 100mm size Stainless steel butt hinges, fixed with stainless steel hinge pin complete all as specified and as directed |
| 50 | S&F 150 mm long, PVC Bow handle complete as specified and as directed. |
| 51 | S&F 100mm long, PVC tower bolt complete all as specified and as directed |
| 52 | S &F in repairs MS Butt hinges medium weight cold rolled & fixed 100mm long |
| 53 | S & F in repairs Aluminium anodized barrel tower bolts of extruded section 200mm |
| 54 | S & F in repairs Aluminium anodized barrel tower bolts of extruded section 150mm |
| 55 | S & F in repairs Aluminium anodized handles cast type 150mm long |
| 56 | S & F in repairs Aluminium anodized handles cast type 100mm long |
| 57 | S & F in repair Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long. |
| 58 | Dismantling of boarding, any descreption, fixed in any position with nails all as specified and directed |
| 59 | S&F 18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed |
| 60 | S & F in 18mm thick High Density High Moisture Resistant (HDHMR)/HDWR Board,both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed. Note: All exposed edges/surfaces to be finished with samelaminated sheet to match with the other surfaces and nothing will be paid extra. |
| 61 | Supply and fix Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 62 | Supply and fix Gun metal handle of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 63 | S&F Continuous (Piano) hinges brass, bright finish width of flaps 40mm |
| 64 | Supply and fix in repairs Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. |
| 65 | Supply and fix in repairs stainless steel telescopic ball bearing channel, zinc plated finish for drawer including necessary fittings up to length of 600mm fixed with screws complete all as specified and directed. |
| 66 | S&F brass knobs 35-40mm dia complete all as specified anddirected |
| 67 | S&F brass knobs 35-40mm dia in repairs complete all as specified anddirected |
| 68 | M&L two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description not other wise described over 10 cm width or girth including preparation of new surface. |
| 69 | M & L for removing old PVC/Cast Iron Multifloor trap incl wall cossing pipe and fixing with new outlet 75 mm PVC (SWR) Multifloor trap with stainless steel grating and new wall crossing and filling with PCC 1:2:4 with water proofing compound incl maching with existing tile and joing with outer pipe line with paste all as specified and as directed |
| 70 | S&F in repair PVC tank cover (thread type) with connecting accessories suitable for water of capacity 500/1000 ltr complete all as specified and as directed |
| 71 | M &L for Welding in repairs n. exc 2.5cm in length N exc 6mm all as specified and as directed |
| 72 | Dismantle of floor &hearth wall tiling including cement motar bedding of any description laid bedded and pointed complete all as specified and as directed. |
| 73 | M&L glazed ceramic colouredtiles (450x350x 7mm) thick on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed neat cemet slury and pointed in coloured cement to match the colouring tile including 10 mm thick, rendering in cement mortar 1:4 for fixing tiles on vertical surfaces such as skirting, dado, all as specified and as directed. |
| 74 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding of cm 1:6 layer in floor finishes complete all as specified and as directed. |
| 75 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square) area of each tile exceeding 0.16 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding of cm 1:6 layer in floor finishes complete all as specified and as directed. |
