|
| 1 | Dismantling plain or corrugated steel sheeting any thickness, complete all as specified and directed. |
| 2 | Dismantling floor hearth or wall tiling and stone slabs including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed |
| 3 | Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) removing rubbish off the premises etc complete all as specified and directed |
| 4 | Demolition of concrete (reinforced) of any description andin any position not otherwise specifically provided for, removing rubbish off the premises etc complete all as specified and directed. |
| 5 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each, complete all as specified and directed. |
| 6 | Taking down chowkhats or framewith shutters (without taking off shutters from frames) exceeding 1.5 sqmtrbut not exceeding 4 sq m each, complete all as specified and directed. |
| 7 | Demolition of brickwork built in cement mortar and removing rubbish off the premises etc complete all as specified and directed |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 9 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed. |
| 10 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed. |
| 11 | Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retrieved debris as directedincluding necessary scaffoldings etc complete all as specified and directed |
| 12 | Taking up or down 15 mm bore steel watertubing and connectionscomplete all as specified. |
| 13 | Taking up or down 20 mm bore steel watertubing and connectionscomplete all as specified. |
| 14 | Taking up or down 25 mm bore steel watertubing and connectionscomplete all as specified. |
| 15 | Dismantling PVC/HDPE/plastic water tank of capacity Exc 500 Litre and notExceeding 1000 Ltr complete all as specified and directed |
| 16 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 17 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed. |
| 18 | Materials and Labour for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layersn exe 15cm thick, watered and rammed to a true surface. |
| 19 | Materials and Labour for Sand filling under floors or in foundationincluding watering and consolidation complete all as specified and as directed. |
| 20 | Materials and Labour for plain cement concrete (1:4:8) type D-2,using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 21 | Materials and Labour for plain cement concrete (1:2:4) type B-0,using 12.5mm graded stone aggregate as in holdfast block, coping, kerb, filling of MS chowkats and the like including necessary formwork complete all as specified and as directed. |
| 22 | Materials and Labour for plain cement concrete (1:2:4) type B-1,using 20mm graded stone aggregate as in surface channel and drain including necessary formwork complete all as specified and as directed. |
| 23 | Materials and Labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. all as specified and as directed. |
| 24 | Materials and Labour for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similer works,for rough finished flat surfaces of concrete, thickness of slab not exc 200 mm,complete all as specified and directed |
| 25 | Materials and Labour for reinforced cement concrete (1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in slabs and shelves supported on walls, beams and columns in floors, roofs and landings etc, any thickness complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately) |
| 26 | Materials and Labour for reinforced cement concrete (1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed including necessary formwork. (Note: Steel reinforcement shall be measured & paid separately) |
| 27 | Materials and Labour for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 28 | Materials and Labour for TMT bars 6 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 29 | Materials and Labour for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde-E- 250) quality-A/Fe.290.Gde-E-165 including painted one shop coat of zinc chromate primer paint (including preparation ofsurface) at workshop before fabrication complete all as specified and as directed. |
| 30 | Supply & fixing Mild steel screw bolt (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be filled with washers and one hexagonal or square nut not exceeding 5 cm long and dia of neckexc 5 to 10mm complete all as specified and as directed. |
| 31 | Supply & fixing Mild steel screw bolt (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be filled with washers and one hexagonal or square nut not exceeding 5 cm long and dia of neckexc 11 to 15mm complete all as specified and as directed. |
| 32 | Supply & fixing rolled mild steelFlats , channel, angle or tee sections as in wind ties for roof including securing bolts, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 33 | Supply & fixing rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 290 Gde-E 165)complete all as specified and as directed. |
| 34 | Supply & fixing mild steel framed work such as grills, gratings, etcas per item no. 121 above but for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etcand similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 35 | Supply and fixingPre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 36 | Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed. |
| 37 | Materials and labour for preparing of new wooden surfaces of any description , over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 38 | Materials and labour for preparing of previously primed steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 39 | Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 40 | Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of black bituminous paint over a coat of red oxide primer, complete all as specified and directed. |
| 41 | Materials and labour for preparing of new steel surfaces of any description , below 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 42 | Materials and labour for non skid ceramic colouredtiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying of floor finishes complete all as specified and directed. |
| 43 | Materials and labour for non skid ceramic colouredtiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,on vertical surfaces such as skirting,dado and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 10mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed. |
| 44 | Materials and labour for coloured 300x600x7-8 mm /300x450x7-8 mm thick glazed ceramic tileson vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thickbacking coat in cement mortar (1:4) , complete all as specified and directed. |
| 45 | Materials and labour for Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15 mm th screed bed in CM 1:6 completeall as specified and as directed. |
| 46 | Materials and labour for Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical serfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thickbacking coat in cement mortar (1:4) , complete all as specified and directed. |
| 47 | Materials and labour for 20mm thick granite slabs of any type (table rubbed and polished) on on riser of steps,skirting,dado, pillar,cooking platforms and like, set and jointed in net cement slurry and pointed in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 15mm thick cement mortor screed bed in cement mortor (1:4) complete all as specified and directed. |
| 48 | Materials and labour for Kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thickbacking coat in cement mortar (1:4) including rubbing and polishing complete. |
| 49 | Materials and labour for Kota stone slab 20-25mm thick in floor laid over and including 20mm thick screed bed or bedding layer of cement mortar (1:6)and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 50 | Materials and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand Complete all as specified and as directed |
| 51 | Materials and labour for 75 mm thick plain cementconcrete (1:3:6) type C2 using 40 mm graded stone aggregate as in floors, plinth protection, path etc. finished the surface of concrete even and smooth without using extra cement, complete all as specified and directed. |
| 52 | Materials and labour for 75 mm thick plain cementconcrete (1:4:8) type D2 using 40 mm graded stone aggregate as in sub-base of floors etc. finished the surface of concrete even and rough , complete all as specified and directed. |
| 53 | Materials and labour for 25 mm thick PCC (1:2:4)type B0 using 12.5 mm graded stone aggt as in sub bases of floor finished even and rough, complete all as specified and directed. |
| 54 | Materials and labour for brick work with fly ash bricksmodular size, straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 55 | Materials and labour for brick work with fly ash bricksmodular size straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 56 | Materials and labour for brick work with sub class \"B\" burnt clay bricks straight or curved on plan exc 6 meter mean radius built in cement mortar 1:4 complete all as specified and as directed. |
| 57 | Materials and labour for brick work with sub class \"B\" burnt clay bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 58 | Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concrete water tubing or concrete conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed. |
| 59 | Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 60 | Supply and fixing 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etccomplete all as specified. |
| 61 | Supply and fixing 165 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etccomplete all as specified. |
| 62 | Supply and fixing flush door shutters 30mm thicksolid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 63 | Supply and fixing 35mm thick second class hard woodglazed and skeleton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed. |
| 64 | Supply and fixing factory Made Solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site, with particle board core as per specification & drawing complete all as specified and directed. |
| 65 | Materials and labour for 18/19mm thick prelaminated particle board, exterior grade, first quality, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in cabinet, cup board,moduler kitchen etc. including external teak wood lipping all round, 6mm thick fixed with nails complete all as specified. |
| 66 | Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screwsetc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco). Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment.Cost of other consumables required for the item shall be deemed to be included in the quoted rate.However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately |
| 67 | Supply and fixing stainless steel cabinet hinges, 75 mm size , complete all as specified and directed. |
| 68 | Supply and fixing stainless steel butt hinges, 100 mm size , complete all as specified and directed. |
| 69 | Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed. |
| 70 | Supply and fixing aluminium anodized rim latch with two levers, fixed with brass knob or lever handle and fixed, 150 mm long, complete all as specified and directed. |
| 71 | Supply and fixing extruded aluminium alloy handles, fabricated type, anodized, 150 mm size , complete all as specified and directed. |
| 72 | Supply and fixing extruded aluminium alloy handles, fabricated type, anodized, 125 mm size , complete all as specified and directed. |
| 73 | Supply and fixing extruded aluminium alloy handles, fabricated type, anodized, 100 mm size , complete all as specified and directed. |
| 74 | Supply and fixing for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 75 | Supply and fixing 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 76 | Supply and fixingmild steel stove enamelled black 300mm long ordinary rat tail rod pattern spring fixed with screws to wooden chowkhats or welding to steel chowkhats,complete all as specified and directed. |
| 77 | Supply and fixing 40mm dia, cupboard knobs, brass, polished fixed with nut, screw and washer of mild steel, bright finished complete as specified and directed. |
| 78 | Supply and fixing CP curtain rails 25 mm dia chromium plated, with and including fixing brackets, stops, rollers etc, complete al as specified and directed. |
| 79 | Supply and fixing Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 80 | Supply and fixing Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 81 | Supply and fixing steel ventilators with top hung shutter including hinges,steel peg stay, including oneshop coat of Zinc Chrome primer complete all as specified and directed. |
| 82 | Supply and fixing Mild Steel flat iron fillets fixed to fly proof steel window shutters with screws or riveted for securing wiring gauze etc and as in wind tiles for roof complete as specified and directed. |
| 83 | Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squaresn.exceeding 0.50sqm in each pane , complete all as specified and directed. |
| 84 | Supply and fixing 4 mm thick sheet glass, ordinary quality and glazing withbeading in squaresn.exceeding 0.50sqm in each pane , to be fixed with aluminium/ UPVC frames complete all as specified and directed. |
| 85 | Supply and fixing 4 mm thick sheet glass, ordinary quality and glazing withbeading in squaresexceeding 0.50sqm in each pane , to be fixed with aluminium/ UPVC frames complete all as specified and directed. |
| 86 | Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. |
| 87 | Supply and fixing galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised steel wire staplescomplete all as specified and directed. |
| 88 | Materials and labour for rendering 15mm thickin cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smoothwithout using extra cement, complete all as specified and directed. |
| 89 | Materials and labour for rendering 20mm thick in two layers of 10 mm thick each in cement mortar (1:4) on fair faces of brick work or concrete surfaces,WPC shall be mixed with morter of top layer, finished even and fair, complete all as specified and directed. (Note:WPC shall be measured and paid separately as supply only) |
| 90 | Supply only liquid Water Proofing Compound of approved make. |
| 91 | Materials and labour for applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed. |
| 92 | Materials and labour for preparation of new plastered surfaces of walls and applyingtwo coats of cement based paint over chalk whitening on wall complete all specified and directed. |
| 93 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of approved colour with roller over chalk whitening complete all as specified and directed. |
| 94 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of approved colour with roller over primer and2-3mm thick wall care putty of approved make complete all as specified and directed. |
| 95 | Materials and labour for anodised aluminium snap grid frame work for false ceiling suspended from soffit of roofincluding hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longcomplete all as specified and directed. Note:- The size of aluminium main and cross tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm or higher) |
| 96 | Materials and labour for4mm thick Decorative non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling flat or sloping, as per IS- 14862, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pessure steam using auto claving process complete all as specified and directed. |
| 97 | Supplying and fixing of 15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. Note:- Quoted rate includes all plain UPVC fittings and pipe cuttings fixing with UPVC solvent cement and testing. |
| 98 | Supplying and fixing of 20mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. Note:- Quoted rate includes all plain UPVC fittings and pipe cuttings fixing with UPVC solvent cement and testing. |
| 99 | Supplying and fixing of 25mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. Note:- Quoted rate includes all plain UPVC fittings and pipe cuttings fixing with UPVC solvent cement and testing. |
| 100 | Supply, laying, jointing & testing 3-layer PP-R (Polypropylene random copolymer) concealed pipes, 32 mm outer dia, SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings such as bends, elbow. tee, socket, reducers, unionsfixed complete to walls, ceilings, trenches or in floors etc as required at site complete all as specified and directed. |
| 101 | Supply, laying, jointing & testing 3-layer PP-R (Polypropylene random copolymer) concealed pipes, 20 mm outer dia, SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings such as bends, elbow. tee, socket, reducers, unionsfixed complete to walls, ceilings, trenches or in floors etc as required at site complete all as specified and directed. |
| 102 | Supply and fixing in repairs, stainless steel sink with drainage board, 1 mm thick for kitchen or laboratoty with plugs, waste pipe, washers, including cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortar to dwarf wall, overall size 915x460mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling and PVC waste pipe complete all as specified and directed. |
| 103 | Supply and fixing in repairs Vitreous China wash hand basin, white, flat back, size 550x400mm,excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 104 | Supply and fixing in repair Vitreous Chinawash down water closet pan (pedestal pattern), white with \"P\" or \"S\" Trap front or back inlet fixing bolts, PVC seat cover complete and making all necessary connection as specified and directed. |
| 105 | Supply and fixing in repair Vitreous China squatting pan, `Orissa\" pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) incl setting the trap and pan in cement mortar (1:3:6) all round and \"P\" or \"S\" Trap, complete all as specified and directed. |
| 106 | Supply and fixing in repairs vitreous china urinal with fixing aceesories bowl type (back or corner wall type) complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 107 | Supply and fixingin repair 10Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 108 | Supply and fixingsheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with CP brass bracket guard railing 60cm long complete all as specified and directed. |
| 109 | Supply and fixing 32 mm dia waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange endbedded in red lead cement and other end fixed complete all as specified and directed. |
| 110 | All same as item No. 109 above but supply and fixing in repair 32 mm dia waste fittings includind taking out old one complete all as specified and directed. |
| 111 | Supply and fixing 40 mm dia waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange endbedded in red lead cement and other end fixed complete all as specified and directed. |
| 112 | All same as item No. 111 above but supply and fixing in repair 40 mm dia waste fittings includind taking out old one complete all as specified and directed. |
| 113 | Supply and fixing 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixedto walls, ceiling or laid in floors etc complete all as specified and directed. |
| 114 | Supply and fixing 40mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf / cm2, fixedto walls, ceiling or laid in floors etc complete all as specified and directed. |
| 115 | Supply and fixing for 600mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed. |
| 116 | Supply and fixing in repairs, 15mm cromium plated Bib taps, cast copper alloy with crutch orbutterfly handle, fancy type,screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 117 | Supply and fixing 15mm bore dia two way bib taps cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed. |
| 118 | Supply and fixing cromium plated Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and directed. |
| 119 | All same as item No. 118 above but supply and fixing in repairs, cromium plated Pillar taps 15 mm bore, cast copper alloy, includind taking out old one complete all as specified and directed. |
| 120 | Supply and fixing in repair Concealed 15 mm bore stop valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type) with capstan head wall flange etcscrewed down screwed for iron pipe complete all as specified and directed. . |
| 121 | Supply and fixingHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 122 | S&Fin repair 15 mm bore fancy type, chromium plated basin inlet connection (angle valve), cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 123 | Supply and fixing CP Soap dish holder including CP screws complete all as specified and as directed. |
| 124 | Supply and fixing in repair CP Soap dish holder including CP screws complete all as specified and as directed. |
| 125 | Supply and fixing CPTubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 126 | Supply and fixing in repairs CPTubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 127 | Supply and fixing in repairsbrass chromium plated, shower rose, 125mm size complete all as specified and directed. |
| 128 | Materials and labourfor concrete bed to 110 mm dia drain pipes using PCC (1:4:8) type D2, using 40 mm graded crushed stone aggregate, including packing under, and haunching againstthe sides of pipes after they are laid and tested, complete all as specified and directed. |
| 129 | Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 130 | Supply and fixing PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 131 | Supply & fixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacityhoisted and fixed in position, connecting with existing pipes all as specified in SSR Part I complete all as specified and directed. |
| 132 | Supply and fixing in repair 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 133 | Supply and fixing in repair 25 mm bore Ball valves highpressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./25mm-455gms/ 40mm - 690 gms)complete all as specified and directed. |
| 134 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 135 | Materials and labourfor concealed point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete.NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates. all asspecified and directed.One light/fan/call bell point controlled by one switch one way 5 Amps |
| 136 | All as per Item No.135 above but for One 2/3 pin socket outlet 5/6Amps on independent board |
| 137 | All as per Item No.135 above but for one switch socket combination 15/16 Amps on independent board with cable 4 sq mm size and earth wire 4 sqmm |
| 138 | Supply and fixingSwitch piano, flush type, single pole, one way switch5 Amps. |
| 139 | Supply and fixing Switch socketcombination 2 in 1,5 Amps flush type. |
| 140 | Supply and fixing Switch socket combination multipurpose 5 A/16 Amps,5 in 1, flush type. |
| 141 | Supply and fixing Ceiling rose surface bakelite 3 terminals 65x50mm all as directed. |
| 142 | Supply and fixing electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed. |
| 143 | Supply and fixing in repair energy saving and environmental friendly long lifeLED security/street Light fittings 35 watts, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover, IP 66 protection, inbuilt driver, connecting with suitable size copper wire, with 25mm bore 1.5 m long medium grade GI bracket made to shapecomplete all as specifiedand as directed. |
| 144 | Taking down existing unserviceable light fitting and Supply and fixingnew decorative type surface and wall mounted20 Watt LED light fittings, 6500 K, 4 feet long, with aluminium housing and integrated electronic driver, fixed to walls/ceiling, environmental friendly, energy efficient ready to use pack. |
| 145 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete, PDC aluminium housing with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete all as specified and directed |
| 146 | Supply, fixing and connecting exhaust fan steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louverscomplete all as specifiedand as directed. |
| 147 | Supply and fixing in repair MCB distrubution board SPN 8 way, double door, IP 43, IK-09, sheet steel, phosphatised, powder coatedwith 200 amps rated bus-bar,neutral link, earth bar and din rail, 240 V, including taking down existing unserviceable DB with MCBs complete all as specified and directed. by Engineer-in-charge. |
| 148 | Supply and fixing in repair MCB distrubution board SPN 4 way, double door, IP 43, IK-09, sheet steel, phosphatised, powder coatedwith 200 amps rated bus-bar,neutral link, earth bar and din rail, 240 V, including taking down existing unserviceable DB with MCBs complete all as specified and directed. by Engineer-in-charge. |
| 149 | Supply and fixing MCB Single pole and neutral (SPN), 240 volts 32 Amps 10 KA rupturing capacity, C series |
| 150 | Supply and fixing MCB Single pole (SP), 240 volts 5 to 32 Amps 10 KA rupturing capacity, C series |
| 151 | Materials &Labour for concealed submain wiring with two single core PVC insulated,unsheathed,stranded copper conductor, FRLSH,of size 6.0 Sqmm and one single core PVC insulated, unsheathed stranded copper conductor FRLSH,of size 6.0 Sqmm green in colour as earth continuity conductor connected to existing main switch board / distribution board of each building / qtr as ordered, drawn into and including20 mm dia PVC conduit (medium grade) with all fitting & accessories and testing on completionincludingtaking down old unserviceable sub-main wiring complete all as specified and directed by Eng-in-Charge . (Note: Two runs of 6 Sqmm cable and one run of 6 Sqmm earthing cable along with conduit altogether shall be measured as one unit.) |
| 152 | Materials and labourforearthing complete with galvanized steel pipe electrode 40mm bore , medium grade, 2.5 meters length, buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground level connected with earthing lead galvanized iron wire of size 4 mm dia connected to galvanized earth pipe by means of bolts, nuts, checknuts and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanized steel tube for watering with one end fix with cast iron funnel and wire-mesh , with protection pipe of 32 mm dia light grade galvanized steel tubing upto 7.5 meters length for drawing earthlead including common salt, charcol , bentonite in alternate layers etc, complete all as shown in EP number 2 of SSR part-1 including testing on completion and including taking down old u/s earthing & testing complete all as specified and as directed. |
