|
| 1 | Items : |
| 2 | Dismantlingof Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 3 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 4 | Demolition of reinforce cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 5 | Surface excavation in soft/ loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out including removing shrubs, vegetation, grass, bush, weed, trees and saplings, undergrowth, roots, and trees not exceeding 30cm grith (measured one metre above ground level), in soft/ loose soil. |
| 6 | Dismantling wall/floor tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 7 | Excavating in trenchesin hard/ dense soil,n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 8 | Removing excavated material, exc. 250m but n exc 500m outside the periphery of area under clearance and depositing where as directed by Engineer in charge. |
| 9 | M&L Hardcore of broken stones or boulder, gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 10 | M&L Cement concrete in foundations, filling and mass concrete, Type C2, 1:3:6 (40mm graded aggregate). |
| 11 | M&L Reinforced Cement Concrete type B-2, 1:2:4 (40mm graded aggregate), 100mm thick in floors & pavings, including finishing concrete surfaces even and smooth without using extra cement. |
| 12 | Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primedand sealed with sealing compound, Grade \"A\". Thickness of concrete slab 100mm. M&L. |
| 13 | Reinforced cement concrete, Type B1, 1:2:4 (20mm graded aggregate), in foundation, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; and mass concrete. M&L. |
| 14 | Reinforced cement concrete, Type B1, 1:2:4 (20mm graded aggregate), in lintel. M&L. |
| 15 | Reinforced cement concrete, Type B1, 1:2:4 (20mm graded aggregate), in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like. M&L. |
| 16 | Reinforced cement concrete, Type B1, 1:2:4 (20mm graded aggregate), incolumns, pillars. M&L. |
| 17 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and simillar work; vertical or to batter. (Rough finished flat surfaces of concrete).M&L. |
| 18 | Formwork to sides of columns. (Rough finished square, rectangular or polygonal surfaces of concrete).M&L. |
| 19 | Formwork to sides and soffits of lintels, (Rough finished flat surfaces of concrete).M&L. |
| 20 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, roof beam and simillar work; not exceeding 200mm thick (Horizontal or sloping rough finished flat surfaces of concrete).M&L. |
| 21 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. M&L. |
| 22 | Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. M&L. |
| 23 | M&L Brick work with sub class Bbricks straight or curved on plan exc. 6 mtr mean radius in CM 1:6, etc. M&L. |
| 24 | S&FRolled Mild steelFramed worked as in doors or gate of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hanging with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging; also fastening and fixing complete. MS Fe-290 (Gde-E-165). |
| 25 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders;ramed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165. |
| 26 | S&F 1mm thick Mild steel, plain black sheet in steel gates and similar work, cut to size, and fixed to steel framing with plain 40mm lap joints with welded seams, including bending or turning up mitred angles, etc. as required. |
| 27 | Rendering plaster 15mm thick in cement mortar 1:4 on fair faces of brickwork or concrete surfaces, including finishing plastered surfaces even and smooth (without using extra cement for external walls).M&L. |
| 28 | Rendering plaster 15mm thick in cement mortar 1:4 on fair faces ofconcrete surfaces of ceilings, including finishing plastered surfaces with neeru finish.M&L. |
| 29 | Neeru finish to plastering as specified for walls. M&L |
| 30 | Rendering 15mm thick in cement mortar 1:4 plaster on fair faces of brick work or concrete surfaces, including taking down damaged plaster.M&L. |
| 31 | M&L Screed bed or bedding layer of cement mortar 1:4, 15mm thick for laying floor finishes. M&L |
| 32 | M&L Non - skid Ceramic tiles, coloured 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white orcoloured cement to match. |
| 33 | M & L Glazed coloured ceremic tiles, joint free of size 350 x 250 x 7 mm/ 450 x 350 x 7 mm in colour, design, size as approved in vertical surface. |
| 34 | M & L viterous china squatting pan of orissa pattern long pan size 630 x 450mm with P or S trap front or back inlet and foot rest any pattern complete including connecting to trap & to flushing pipe with provision of lime concrete bedding,including PVC valveless, syphonic action type, flushing cistern, 10 lit capacity low level, white, with inlet, ball valve, float and handle including brackets,and connections to pipes and fixing of chain and pull, or lever, if any, |
| 35 | S&F Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms), |
| 36 | S&F 15mm bore Tubes, \"medium grade\" galvanised, with all required connecting fittings (viz. Elbows, union, nipples, sockets, Tees, reducers, etc.) and fixed complete to walls and ceilings or laid in floors. |
| 37 | S & F PVC (SWR) floor trap with grating including jointing with solvent cement. Diameter of outlet 75mm. |
| 38 | S & F 75 mm PVC ( SWR) pipe single socketed in any length with rubber ring joints fixed to walls. |
| 39 | S & F 110 mm PVC ( SWR) pipe single sockted in any length with rubber ring joints fix to floor or laid in trenches. |
| 40 | S&F PVC (SWR) bends any radius for 75mm bore. |
| 41 | S&F PVC (SWR) bends any radius for 110mm bore. |
| 42 | S&F Stop valve of PTMT any colour high pressure with long shank and cup (concealed type), (Minimum weight 15mm-110gms) screwed for iron pipe and fixed. |
| 43 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, with white cement and pigment. After fixing, the flooring shall be kept moist and allowed to mature undisturbed for seven days so that the bedding and joints set properly. |
| 44 | M&L Preparation of old plastered or unplastered surfaces of external walls including brooming down or steel wire brushing; scrapping down smoke soots, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling holes of nails and unevenness. Including Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 45 | M&L Cutting chases in Stone concreteblock or slab wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and making good, cutting exc 10 cm but not exc 20 cm girth. |
| 46 | Roughening surfaces of old concrete floor and walls by picking, sweeping clean and washing down with water to remove dust, etc., including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. |
| 47 | M&L Preparation of old steel surfaces & Pantingwith one coat red oxide & two coatsynthetic enamel oil paint of any description, over 10cm in width or girth, not otherwise described. |
| 48 | Providing and applying minimum 10mm thick single coat with ready made polymer modified mortar Px of Dr. Fixit or Renderoc S 2 of Fosroc making finishing the surface including necessary scaffolding and curing etc complete as per manufactures specifications. |
| 49 | \"M&L Preparation and cleaning of horizontal/ verticalsurfaces at any height (maximum 7.0mtrs) with mechanical grinder /wire brush to remove all protutions, oil, dirt, mud, dust, etc.The old coatings if any has to be removed completely. The crackscavities below 3mm thick to be filled with poymeric filler and if cracks are beyond 3mm thick water resistant polymer adhesive paste to be filled after cutting / enlarging cracks in complete dry condition. The surface then to be air cured for 72 hours. Again same surface has to be rubbed/ polished with150 number emery paper. After surface preparationdampness has to be checked with appropriate instrument and first coat of Polyurethane based polymeric compositions water resistance materials 2k properties tested and certified by National Chemical Laboratoryhas to be applied withroller/ brushover complete dry and clean surface. After leaving for 24 hours for aircuring the applied surface to be rubbed with 320 number emery paper and bubbles/ unevenness if any to be repaired. Second coat ofPolyurethane based polymeric compositions water resistance materials 2k properties tested and certified by National Chemical Laboratoryhas to be applied with roller/ brush which will be further air cured for 72 hours. |
| 50 | Cleaning & removing all scales & dirt, etc. from filter bed\"s walls, floors, ncluding cleaning of holes of water collecting & compressed air laterial drain CI pipes laidbelow filter media, etc. from each compartment of filter bed. |
| 51 | Supply and laying of base material for rapid sand filter consist of graded gravel (obtained from Narmada river) bed 51.80cm thick laid in layers as fallows:-Ist bottom layer of 50mm gravel size having 12.10cm thickness;IInd intermediate layer of 20mm gravel size having 9.20cm thickness;IIIrd intermediate layer of 10mm gravel size having 9.20cm thickness;IVth intermediate layer of 5mm gravel size having 12.10cm thickness;Vth top layer of 2mm gravel size having 9.20cm thicknessThe gravel to be used below the sand should be hard, durable, clean and free from impurities viz. silt, clay balls and other foreignmatter and to be approved by Engineer in charge before supplying and laying. |
| 52 | Supply and laying of filter media for rapid sand filter consist of graded sand silica obtained from Narmada river, pass through 16 X 16 mesh per sq inch & to retain on 32 X 32 mesh per sq inch IS 1917 of 1962 passing of sand should be less than 90%. The sand to be used should be hard, durable, clean and free from impurities, clay, loom, fine particles, soft grains, dirt,vegetable or organic matter and other foreignmatter. It should be uniform of proper size and to be approved by Engineer in charge before supplying and laying. |
| 53 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10mm dia double threaded 6.8grade (yield strength 480n/mm2), counter sunk head, comprising of 10mm dia polyamide PA6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 X 160mm. |
| 54 | Credit from contractor for Old damaged MS sheet, angle, reinforcement bars, rusted GI pipes, etc. obtained from Item no. 02 & 3 |
| 55 | Credit from contractor for old damaged filter media of sand, gravel, stone boulders, etc, obtained from rapid sand filter, sludge drying beds including removing the damaged filter media from beds. |
