|
| 1 | Removing dry or oil bound distemper, water proofing cement paint,texture paintand the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 3 | Providing & Applying high quality acrylic modified resin based with special quality dolomite texturising sand texture of Dholpur/Red sand stone/Scratch/Roller Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness, including priming coat of exterior primer applied @ 2.20kg/10 sqmafter scrapping and properly cleaning the surface to remove loose particles from the plaster surface,filling of cracks by using crack filling compound, filling up of holes and dents with White cement putty, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43litres/10 sqm, complete as the direction of Engineer -in-Charge. |
| 4 | Finishing Walls with textured exterior paint of required shade( Two or more coats applied @3.28 litre per 10 sqm over and including priming coat of exterior primer applied @ 2.20Kg/10sqm) |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 6 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : 1.81 Old work (one or more coats) |
| 7 | Wall painting with acrylic emulsion paint, having VOC less than 50grams per litre of approved brand and manufacturer,including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 8 | Painting Sythentic enamel paint of approved brand and manufacture of required colour to give an even shade . One or more coats on old work |
| 9 | Brick work with common burnt clay modular bricks of class designation, 7.5 in foundation and plinth in Cement Mortar 1:4(1cement:4coarse sand) |
| 10 | Providing and Fix 18mm thick gangsaw cut (polished and machine cut) of average thickneess for wall lining (veneer work) backfilled with grout of average 12 mmthick in cement mortar 1:3(1 cement:3 coarse sand ) including pointing with white cement mortar1:2(1 cement :2marble dust) with an admixture of pigmentto match the marble shade |
| 11 | Providing and Fixing 18 mm thick gang saw cut mirror plshed,premoulded and prepolished,machine cut for Kitchen Platforms,vanity counters,window, colum claddingsills,facias and similar locations of required size approved colour or texture laid over 20 mm thick base cement mortar 1:4(1 cement:4 coarse sand) joints treated with white cement,mixed with matching pigment,epoxy toch ups including rubbing curing,moulding of edges, polishing to give high gloss finish etcGranite stone slab of all colours except black, cherry or ruby red area of slab over 0.50 sqmRaj Nagar/Plain White Marble /Udaipur Green Marble/Zebra Black MarbleArea of slab over 0.50 sqm |
| 12 | Providing edge moulding to 18 mm thick marble stone counters, including machine polishingto edge to give high gloss finish etc complete as per design approved by Engineer-In-charge granite work |
| 13 | Steel Work welded in built up sections/framed work including cutting hoisting, fixing in position, and applying a priing coat of approved steel primer using structural steel, as reqiredIn grating frame guards, ladder railing,brackets,gates and similar works |
| 14 | Making the opening in brick masonary including dismantling in floors or walls by cutting masonary, and making good damages to the walls,flooring and jambs complete, to match existing surface, including disposal of mulba, rubbish to the nearest municipal dumping groundFor door window celestry window |
| 15 | Dismantling cement concrete manually / by mechanical means and sisposal of material with in 50 meters lead as per directions of engineer-In-ChargeNominal concrete 1:3:6 or richer mix |
| 16 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelingsystem and rubber mallet for placing the tiles gently and easily.Size of tile 600mmX600mm |
| 17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand),Jointing with grey cement slurry @ 3.3 kg/sqm includingpointing the joints with white cement and matching pigment etc.,complete. |
| 18 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown,in skirting/wall claddinglaid on 12mm thick cement mortar 1:3 (1 Cement :3 Coarse sand),Jointing with grey cement slurry @ 3.3 kg/sqm includingpointing the joints with white cement and matching pigment etc.,complete. |
| 19 | Providing and Laying cement concrete in Retaining Walls Return Walls inlcuding attached pilasters,columns, piers, abutments, pillars posts struts, buttress,strings or laces courses, parapet,coping,bedblocks,anchorblocks,plain window sills fillets,sunken floor etc upto floor level five, excluding the cost of centreing shuttering and finishing1:3:6(1cement:3coarse sand(Zone-III): 6graded stone aggregate 20 mm nominal size derived from natural resources) |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion |
| 21 | For Openable Portion shutters of doors windows and ventilatorsFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall bepaid for separately) |
| 22 | Providing and fixing 12 mm thick pre laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. |
| 23 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm width and 5 mm depth |
| 24 | Design,Providing, installation and fixing 12 mm thick Toughened Glass partitions upto 3.00 M with proper machine edge finish in angle & fixed in the flooring with Aluminium \"U\" channel & flushed with the ceiling. Glass panels to be formed as per approved modules 12 mm thick clear toughened glass edge polished and accurate designed holes to be installed by means of steel angle or spider fittings of an approved make Saint Gobain / Asahi or equivalent. The structural Glass walls system shall be complete with proper water tight silicon sealants /gaskets. M.S Brackets to support the structure system shall be hot dipped galvanized and slots in the brackets to be pre drilled not flame cut. All bolts,nuts,washers shall be 300 series non magnetic stainless steel and lock washers to be provided at all bolting connections. |
| 25 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 26 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 27 | Providing and Fixing Float glass panes5 mm thick in aluminium windows, doors shutters, ventilators etc |
| 28 | Repairing of aluminium doors(glazed or panelled), by dismantling, cutting, re-shaping, assembling and refixing including all necessary screws, cleats, replacing neoperene rubber all complete.Doors upto the size area of 3.72 sqm |
| 29 | Providing and fixing stainless steel ( Grade 304) tower bolts 18 inches long and 12 mm dia |
| 30 | Providing and fixing stainless steel ( Grade 304) tower bolts 12 inches long and 12 mm dia |
