|
| 1 | Construction Of Processing Shed 91.02 SQM |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murmur, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Life up to 1.5 m.) By Mechanical Means. (INo21 - 02, Pong 153) (STATE SSR) Item Spec: (Bd.A.1 Page No. 153) |
| 3 | Excavation for foundation in hard murum including removing the excavated material up to distance of 5O meters beyond the building area and stocking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.50 m) By Mechanical Mean. (INo 21-06, PgNo 197) (STATE SSR ) Item Spec: (Bd.A.2 Page No. 259) |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite quartzitel gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) (INo24-01, PgNo 226) (STATE SSR) Item Spec: (Bd. E. 1 Page No.287) |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work infoundations like raft, strip foundations, grillage and footings ofR.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compoct1ng and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch m1x plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 7 | providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover block, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (INo. 25-50,PgNo 234) (STATE SSR ) Item Spec: (Bd.F.6 Poge No. 300 and B.7, Page No.38) |
| 8 | Providing and casting in situ cement concrete M-20 of trap/Granite/quartzite/gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Bd.F.8 Page No. 302 and B.7, Page No.38 |
| 9 | Providing and laying in situ cement concrete M-20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen etc. complete. SSR 2019-20 Item No. 33.30. |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile cops, footings, foundations, slobs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, canopings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bass, binding with wires or tack welding and supporting as required complete. (INo 26-33, PgNo 245) (STATE SSR) Item Spec: (Bd.F.17, Page No. 306) |
| 11 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement morta r 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed foces, raking out joints on exposed foces and watering etc. complete. |
| 12 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out points, watering and scaffolding etc. Complete. Bd.G.5 Page No.315 |
| 13 | Filling in plinth and floors with approved excavated material in 15 cm to 20 cm Layers including watering and compacting etc complete |
| 14 | Filling in plinth and floors with\contractors material/brought from outside and approved by Engineer incharge in layers of 15cm, to 20cm, including watering and compaction etc. complete. (IN0 21-37, PgNo 201) (STATE SSR ) Item Spec. (Bd.A.11 Page No. 283) |
| 15 | Providing soling using 80 mm size frop metal in 15 cm. layer including filling voids wifh Crushed sand/grit, ramming, wateringetc. complete |
| 16 | Providing internal cement planter 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (INo 32-04. PgNo 268) ( STATE SSR ) ltem Spec: (Bd.L.2 Poge No. 368) |
| 17 | Providing sand faced planter externolly in cement mortor using opproved screened sand, in all positions including base coot of 15 mm thick in cement mortor 1:4 using woterproof1ng compound at 1 kg per cement bog curing the some for not less from 2 days and keep1ng the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.compIete. (INo32-11, PgNo 269) ( STATE SSR ) ltem Spec: (Bd.L.7 Poge No. 369) |
| 18 | Providing & applying washables oil-bound distemper ofapproved color and shade to old & new surfaces 1n two coots including scaffolding, prepor1ng the surfaces. (excluding the primer coot.) etc. complete. (INo36-11, PgNo 291) (STATE SSR) Item Spec: (Bd.P.5 Page No. 413) |
| 19 | Providing and applying three coots of water proof cement paint of approved manufacture and of approved color to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, catering for two days etc. complete.Spec.No.: Bd.0.8/Page No.406 |
| 20 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, /hooking riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coots of all pointing approved quality and shedeetc. complete |
| 21 | Providing and fixing color coated Zincolume (R) AZ) 50 ( min 150 gms/sq.mt. Total on eoch side ) prof1led sheets for roofing. The feed materiol is manufactured out of nominol 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 Mpa yield strength, metallic hot dip cooted with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality with thickness of nominol 25 um, comprising of nominal 25 um exterior coat on top surface and nominol 10 coat on back surfoce. Profile sheet shall have nom. 950-1O5O mm width and nominal 25-30 mm deep ribs with subtle square fluting in shall be designed for anti-capillari groove. & return leg. The feed material should have coil manufocturers product details marked a regulor internal. including fasteners with min. Fastened with min. 15 vm Zinc-Tin alloy coated, Hex head, self-drilling screw efc. Complete. (weight of profile 4.52 kg/sqm)..(As directed by Engineer in charge.) |
| 22 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm orgies section fitted with Sliding bolts and handles for both sides, deep M. S. channel section of respectively with hold fast arrangements, M.S. Brocket plate 300 X 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cost iron or mild steel and one coat of red lead primer etc. complete. (I.S.6248-1979) (Without mechanical gear)....(lNo39-24 , PgNo 318) ( STATE SSR) Item Spec: (Bd.T.55, Poge No. 510) |
| 23 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes andapproved type and quality and iron oxidized fixtures and fastening oil point 2 coats etc. complete.Bd. T. 53, Paige No.509 & As directed by Engineer in charge. |
| 24 | Electrification Work |
| 25 | Supplying & erecting mains with 2x1.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min. 20mm dia CSR 2022-23 Item No 1-3-1/5 Additional specification No: WG-MA/PC |
| 26 | Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia CSR 2022-23 Item No 1-3-2/5 Additional specification No: WG-MA/PC |
| 27 | Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia CSR 2022-23 Item No 1-3-3/5 Additional specification No: WG-MA/PC |
| 28 | Supplying and erecting Celling rose / Batten hoider/Slanting holder/hanging cord switch/hanging bell push/pendent holder bakelite base 6A erected on Filled polypropylene board or polished double wooden block/ PVC junction box. CSR2022-23 Item No 1-5-7/7 |
| 29 | Supplying and erecting hylam sheet/ ebonite sheet 3 mm thick for covering wall entries including cutting, drilling and foong with nut bolts/screws etc. complete CSR 2022-23 Item No 6-1-9/106 |
| 30 | Supplying and erecting triple pole and neutral distribution board (TPNDB) surface? flush mounted suitable for SPMCB of 12 ways on iron/Gl frame (horizontal busbar type) CSR2022-23 tem No 5-4-1/91 Additional specification no. SW-SWR/MCBD8 |
| 31 | Supplying, erecting & marking FPMCB 63A in provided distribution board. CSR 2022-23 item No 5-3-16/91 Additional specification No SW-SWR/MCB |
| 32 | Supplying, erecting & marking DPMCB 6 A to 32 A B-series (for lighting) in provided distribution board CSR 2022-23 Item No 5-3-7/90 Additional specification No. SWSWR/MCB |
| 33 | Supplying & erecting conventional spike Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.I. cover complete with all materials, testing & recording the results. CSR 2022-23 Item No 9-1-3/160 Additional specification No. EA EP |
| 34 | Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm aluminium conductor with continuous 5.45 sq. mm (12 SWG) GI earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe CSR 2022-23 Item NO 7-1-30/128 Additional specification No CB-LT/AL |
| 35 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. CSR 2022-23 Item No 7-6 10/140 |
| 36 | Supplying & erecting Siemens type brass cable glands for 4 core 35 sq. mm/3 core 50 sq mm, for XLPE armoured cable. CSR 2022-23 Item No 7-7-4/141 Additional specification No. CB-GL |
| 37 | Supplying & erecting crimping type copper lugs for cable 25 sq. mm complete. CSR 2022-23 Item No 7-9-2/142 Additional specification No. CB-CL/CU |
| 38 | Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 2 ways for outgoing SPMCBs on iron/ Gl frame. CSR 2022-23 Item No 5-4-1/91 Additional specification No. SW-SWR/MCBDB |
| 39 | Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF>0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete CSR 2022-23 Item No 2-5-4/28 Additional specification No. FGODF/FLS2 |
| 40 | Supplying and erecting Street light bracket made from 40 mm, dia \"B\" class G.I. Pipe, 0.6m, in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads. CSR 2022-23 Item No 2-7-2/32 Additional specification No. FG-BKT/BPC |
| 41 | Providing and fixing lioghtening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25mm dia. 1.2 mm thick with multiple points head 1.2 mt. long (Heavy Duty) welded or clamped to G.1. pipe pole B grade 50 mm diaof required length with M.S. round brase plate 25 Cm diam and 10mm thick at bottom embeded in cement concrete 1:3-6 dfoundation of size 45 cm diam x 45 cm Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kg charcoal and salt with alternate layers of charcoal and salt and G.1 pipe 40mm dia 2 meter length buried in earthe upto earthling plate remining portion above ground level for watering and refilling comcpete Note- Copper strip fropen lightening conductor is not considered in this item. OWD SSR 2022-23 Item No 44.15/295 Additional Spec No: BDW 1 PAGE No 581 |
| 42 | Providing and fixing copper strip 25mm wide and 3mm thick for lightening conductor including fixing with screws required scaffolding etc.complete Note-Lightening conductor and earthinf pits is not considered in this item. PWD SSR 2022-23 Item No 44.19/595 Additional Spec No :BDW 1 Page No 581 & As directed by Engineer in Charge |
| 43 | Royalty Charges |
| 44 | For Sand |
| 45 | For Murmur |
| 46 | For Rubble |
| 47 | Material Test |
| 48 | Cement - Fineness, Standard Consistency,Setting Time (Initial & Final ), Compressive strength, Soundness |
| 49 | M-20 Mix Design with all tests on basic materials |
| 50 | M-20 Concrete cube compressive strength (Set of 3 Cubes) |
| 51 | Bricks Water absorption, Specific gravity,Impact value,Crushing value |
| 52 | Crushed metal - Crushing value, Water absorbation, & Specific Gravity |
| 53 | TMT Steel - Tensile strength , Yield stress, ultimate tensile stress, % elongation, weight per running meter, Bend/Rebend test. (Set of 3 Bars) |
| 54 | Sand - Fineness Modulus, silt & clay content. |
| 55 | Murum Plasticity Index |
| 56 | ESHS Compliance |
| 57 | Management Strategies and Implementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct Please Enable Macros to View BoQ information |
