|
| 1 | Providing and laying in cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and curing complete, including cost of formwork in foundation and floors. All rate are excluding of GST (DSR Code 4.1.11) |
| 2 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) including supply of all materials, labour and tools and plants etc. required for proper completion of the work. All rate are excluding of GST (DSR Code 6.1.1) |
| 3 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) including supply of all materials, labour and tools and plants etc. required for proper completion of the work. All rate are excluding of GST (DSR Code 6.4.1) |
| 4 | 12 mm cement plaster of mix : 1:6 ( 1 cement : 6 coarse sand) All rate are excluding of GST (DSR Code 13.1.2) |
| 5 | 12 mm cement plaster of mix : 1:4 ( 1 cement : 4 coarse sand) All rate are excluding of GST. (DSR Code 13.1.1) |
| 6 | Cement plaster of mix : 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement 12 mm cement plaster. All rate are excluding of GST (DSR code 13.9.1) |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC contents less than 50 grams/liter. Of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats) All rate are excluding of GST (DSR code 13.81.1) |
| 8 | Cement concrete flooring 1:2:4 (iCement : 2 Coarse sand : 4 graded stone aggregate) Finishing with floating coat of neet cement including cement slurry, but excluding the cost of nosing of steps etc. complite 40mm thick with 20mm nominal size stone aggregate All rate are excluding of GST. (DSR Code 11.3.1) |
| 9 | Reinfourced cement concrete work in wall (any thickness) including attached plasters, buttresses, plinth and string courses, fillets, columns, pillers, piers, abutments post and struts etc. above plinth level up to floor V level in excluding cost of centering, shuttering, finishing and reinforcement 1:1:5:3 ( 1 cement : 1.5 coarse sand (zone-III) derived form natural source : 3 graded stone aggregate 20mm nominal size derived from natura sources and also including supply of all materials, labour and T&P etc. required for proper completion of the work binding wire cost being included in the item. All rate are excluding of GST (DSR Code 5.2.2) |
| 10 | Mild Steel or iron in plan work such as reinforced concrete wrought to required shapes as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overtapping shall be measured (S.I. No 504) All rate are excluding of GST |
| 11 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle section of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T-iron frame or to the wall with dash fasterner, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of Engineer-in-charge. All rate are excluding of GST (DSR code 10.31) |
| 12 | Providing and fixing ISI marked flush door shutters confirming to IS : 2202 (Part I ) non-decoverative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 13 | Providing and fixing fly proof wire gauze to windows, clerestory windows & door with MS flat 15x3 mm and nuts & bolt complete. Galvanised MS wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. All rate are excluding of GST (DSR code 10.29.1) |
| 14 | Terrace repair providing and laying damp-proof course 40mm. Thick with cement 1:2:4 ( 1 cement : 2 coarse sand (Zone-III) including manufactured sand drived from recycle concrete aggregated (RCA) upto 25% : 4 graded stone aggregate 12.5 mm nominal size including (recycled concrete aggregate (RCA) upto 25%)). including cost of all material, labour and T&P etc. as directed by Engineer-in-charge. |
| 15 | Finishing Walls with water proofing cement paint of required shade old work one or more coats @ 2.20 kg/10sqm) complete. All rate are excluding of GST. (DSR Code 13.109.2) |
| 16 | Finishing Walls with Premium Acrylic smooth Exterior Paint with Silicone additives of required shade; new work (two or more codes applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90/10sqm. All rate are excluding of GST. (DSR Code 13.47.1) |
| 17 | Wall painting with premium acrelic emulsion paint of interior grade having VOC content less than 50gm/litre of approved brand manufacture,including applying additional coats wherever required to achieve even shade and colour.for two coats (DSR Code 13.83.2) |
| 18 | Painting with synthetic enamel paint of approved brand and manufacturer on or more cost on old work including cost of all material, fitting, labour T&P etc. as directed by Engineer-in-charge DSR Code 13.99.1) |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture ) with water absortion less than 0.08% and conforming to IS: 15622 ,of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 Coarse sand ) ,jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc,complete.Size of Tiles 600 x 600 mm (DSR Code 11.41.2) |
| 20 | Providing and fixing glass panes with putty and glazing clips in steel doors windows, clerestory windows, all complete with 4.0 mm thick glass panes including supply of all materials labour and tools and plants etc. requird for proper completion of the work. All rate are excluding of GST (DSR code 10.30.1) |
| 21 | Providing and fixing white vitereous china water closet squatting pan (Indian Type) Orissa pattern W.C. pan of size 580x440 mm including supply of materials labour and tools and plants etc. required for proper completion of the work.. All rate are excluding of GST (DSR code 17.13.2) |
| 22 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan with seat and lid ,10 litr low level white vitreous china flushing cistern &C.P. flush bend with fittings & C.I. brackets ,40 mm flush bend,overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete ,including painting of fitting and brackets,cutting and making good the walls and floors wherever required: W.C.pan with ISI markes white solid plastic seat and lid. All rate are excluding of GST (DSR code 17.13.1) |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank All rate are excluding of GST (DSR code 18.48) . |
| 24 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. All rate are excluding of GST (DSR code 18.50.1) |
| 25 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore. All rate are excluding of GST (DSR code 18.49.1) |
| 26 | Providing and fixing on wall face unpiasticised Rigid PVC rain water pipe conforming to IS: 13592 Type A. Including jointing with seal ring confirming to IS 5382 leaving 10mm gap for themal expansion. single socketed pipes 110mm diameter. . All rate are excluding of GST (DSR code 12.41.2) |
| 27 | Provinding and fixing on wall face unplasticised Rigid PVC rain water pipe confirming to IS: 13592 Type A. including jointing with seal ring confirming to 5382 leaving 10mm gap for themal expansion. single socketed pipes 75 mm diameter. . All rate are excluding of GST (DSR code 12.41.1) Please Enable Macros to View BoQ information |
