|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. As per D.S.R-15.56 |
| 2 | Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. As per D.S.R-13.91 |
| 3 | Supply of Muraga jali 1/2x 24 gauge. |
| 4 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)22.14.1 |
| 5 | 12 mm thick plaster in 1:3 in cement and fine sand and finish with neat cement finishing on the top of Roof As per D.S.R 13.7.1 |
| 6 | 12 mm cement plaster of mix: 1:6 (1 cement:6 coarse sand) e.t.c As per D.S.R items No-13.4.2 |
| 7 | Providing and fixing glass panes with putty and glazing clip in steel door windows clerestory windows all complete with 4.0mm thick glass panes as per dsr 10.30.1 |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (PartI) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws. Single leaf.-D.S.R.-9.21.1 |
| 9 | Providing and fixing lSl marked oxidisedl vl.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised asp er Ls 1378). 300x16 mm (D.S.R.-9.62.1) |
| 10 | Providing and fifing lSl marked oxidised M.S.tower bolt black finish, (Barrel type) with necessary screws etc. complete(Copper oxidised as per lS 1378).250x10 mm (D.S.R.-9.63.1) |
| 11 | Providing and fixing lSl marked oxidised M.S. handls conforming to lS:4992 with necessary screws etc. complete (Copper oxidised as perts 1378)(D.S.R. -9.66.1) |
| 12 | Demolishing cement concrete manually /by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix As per D.S.R-) 15.2.2 |
| 13 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 (25 mm thick) |
| 14 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete |
| 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete |
| 16 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. as pr dsr 11.37a |
| 17 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. - D.S.R.-13.80 |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture: (M.S.works and wood work).(D.S.R.-13.62.1) |
| 19 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work(Inner walls & Ceiling)(DSR-13.41.1) |
| 20 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work( Two or more coats applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm) (Outer surface).Ground Floor-D.S.R.-13.47.1 |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with sealring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter [DSR-12.41.2] |
| 22 | Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sealring conforming to IS:5382, leaving 10mm gap for thermal expansion.110 mm bend [DSR-12.42.5.2] |
| 23 | Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. scrwes of required length, including cutting brick work and fixingin cement mortar 1:4 (1cement:4coarse sand) and making good the wall etc. complete.110 mm[DSR-12.43.2] |
| 24 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides as pr dsr no 10.29.1 |
| 25 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 26 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 27 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia 17.28.2.2 |
| 28 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 29 | Lettering with blck japan paint of approved brand manufature as pr dsr 13.71 |
| 30 | Supply and fixing of inguration post at site |
| 31 | Wiring For light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 1.1 Group C1.10.3 |
| 32 | Wiring for circuit/ sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduitas required.1.14 2X1.5 sqmm + 1x1.5 sqmm earth wire1.14.1 |
| 33 | 2X2.5 sqmm + 1x 2.5 sqmm earth wire 1.14.2 |
| 34 | Supplying and fixing following size / modules , GI box along with modular base & cover plate for modular switches in recess etc as required.1.27 1 or 2 module(75mm X 75 mm ) 1.27.1 1 or 2 module(75mm X 75 mm ) 1.27.1 |
| 35 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch , connection etc. as required. 1.31 |
| 36 | Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box / woodedn block including connection etc. as required. 1.33 |
| 37 | Supply , Installation, Testing and Commissioning of 1200 mm sweep, BEE5 star rated, ceiling fan with Brush Less Disect Current (BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long downrod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6,Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS:374- 2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50Hz , single phase AC Supply, earthing etc. complete as required. 19.1 |
| 38 | Supply of 225/230mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level :(45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect 230 MM sweep |
| 39 | Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts gradeat the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top as directed by Engineer- Incharge, complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 20a.1 50 sqmm 3.5 core 20a.1.12 |
| 40 | Supply & fixing of IP 20, Front Lit, Mid Power SMD type LED Light, recess / Surface mounting round 10 Watt to 15 Watt, Cut out Min. 125 mm, Height Min 40 mm, Led Down Lighter having Power coated die cast aluminium housing with heat sing, High purit/transmisivity UV Stabilized Non yellowsid diffuser / Refelctor for uniform light distribution, detachable driver set, suitable for 24 Hr Continuous Operation, complete in all respects. 23.02 1200-1800 system lumens,>120 Lm/W, PF>0.95, THD<10% at full load, CRI>80, >300 V over voltage protection, 2.5 KV internal Surge Protection, with 5 years warrantee.23.02 CAT-AAA |
| 41 | Supply and fixing of LED Tube Light with heavy Duty Metal Boxt ype Tube Light Fitting 1x22 watt suitable for upto 1x22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended completein all respect. 2620 system lumens, with fully covered diffuser type>120 lm/w PF>.95, THD<10%, CRI>80, sheet thickness min 0.8 mm, Tube with aluminium heat sink ,>300 V over voltage protection, 2.5 KV internal Surge protection, with 5 years Warrantee. 23.07 CAT. - AAA Please Enable Macros to View BoQ information |
