Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Sch \"A\" Part-I (B/R works)Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4.0 sqm each incl. cutting holes for taking out hold fast or dismantling brick work(holes cut and any other damage to jambs,walls for taking out hold fast shall be finished identical to existing finish withoutany extra cost to Govt), complete all as specified and directed. |
| 2 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) incl. cutting holes for taking out hold fast or dismantling brick work(holes cut and any other damage to jambs,walls for taking out hold fast shall be finished identical to existing finish withoutany extra cost to Govt), complete all as specified and directed. |
| 3 | Demolition of cement concrete n.exc. 15cm thick above or below ground level, complete all as specified and directed. |
| 4 | Demolition of cement Concrete of any description and in any position not otherwises pecifically provided for, complete all as specified and directed. |
| 5 | Taking down cement or cementplaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 6 | Dismantling of water tank capacity 500 to 1000 ltr, complete all as specified and directed. |
| 7 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm bore, complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises, complete all as specified and directed. |
| 9 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed. |
| 10 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed. |
| 11 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed. |
| 12 | Supplying and fixing of 20 mm outer dia CPVC tank adopter, complete all as specified and directed. |
| 13 | M&L for Cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in roof pedding/ levelling course, complete all as specified and directed. |
| 14 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer, complete all as specified and directed.:-(i) Taking down/removing existing treatment and cleaning properly with wire brushing etc, rabish off from the premishes. (ii)10mm thick plastering on roof surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturers instructions. (iii) After drying concrete surfaces and apply a coat of bituminous primer @0.40 Kg/Sqm on the prepared surface of roof. (iv)After the primed surface has dried, apply a coat of hoat blown bitumen85/25 or equivalent viscosity grade @ 1.2 Kg /Sqm of the surfaces etc complete.(v) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, of approved make standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.(vi) Applying a coat of hot air blown grade bitumen of grade 85 / 25 @ 0.5 Kg / sqm duly sanded over polymeric membrane complete. (vii)provide final layer of two coats of aluminium paint over a coat of primer as per manufactue instructions. |
| 15 | Supply only water liquid water proofing compound conforming to IS, complete all as specified and directed. |
| 16 | M & L for rendering 10mm thick on fair faces of brick/stone work or concrete surface in CM (1:6) as in wall, finished even and smooth without using extra cement, complete all as specified and directed. |
| 17 | M & L for rendering 15mm thick on fair faces of brick/stone work or concrete surface in CM (1:4) as in wall with WPC , finished even and smooth without using extra cement, complete all as specified and directed. |
| 18 | M & L for rendering 5mm thickin ceiling on fair faces of brick/stone work or concrete surface in CM (1:3) as in wall, finished even and smooth without using extra cement, complete all as specified and directed. |
| 19 | M&L for preparation of newly plasteredsurfaceof walland applying Acrylic Smooth exterior paint of required two or moreshade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 20 | M&L for two coats of white wash on ceiling including preparation of newly pastered surface, complete all as specified and directed. |
| 21 | M&L for one coat of white wash in ceiling including preparation of old decorated surface, complete all as specified and directed. |
| 22 | M & L for preparation of new plastered surface of wallsurfaces including cornices and applying two coats of distemper oil emulsion paint over a coat of primer including a coat of wall care putty, complete all as specified and directed. |
| 23 | Complete removal of existing teatment of wall surfaces including cornices and applying two coats of distemper oil emulsion paint over a coat of primer including a coat ofwall care putty, complete all as speicied and directed. |
| 24 | Complete removal of existing treatment of wall andapplying Acrylic Smooth exterior paint of required two or moreshade : New work (Two or morecoat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over acoat of primer, complete all as specified and directed. |
| 25 | Material and Labour for glazed ceramic tiles of size 450 mm x 350 mm x 7mm thick colouredon vertical surfaces as dado/skirting set and jointed and pointed in net cement slurryand pointed in white cement mixed with colour pigments to match the existing surface over and including 10mm thick backing coat in CM(1:4), complete all as specified and directed. |
| 26 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15mm thick screed bed in CM(1:6), complete all as specified and directed. |
| 27 | M&L for Granite work 16-18mm thick(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed in Cement mortar 1:6, complete all as specified and directed. |
| 28 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15mm thick screed bed in CM(1:6), complete all as specified and directed. |
| 29 | M&L for coloured chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in path with grey cement and no pigment over and including. 20mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 30 | M&L for 75mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in path/ hard standing even & fair without using extra cement, complete all as specified and directed. |
| 31 | M&L for cement cocrete type E2 1:5:10 (using 40mm graded stone aggregate) in filling of sunken floor etc, complete all as specified and directed. |
| 32 | Cutting holes into or through brick / Block walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required not exc. Surface area 150 sqcm, complete all as specified and directed. |
| 33 | S&F in repair 50mm boreGI pipelight grade as in spout, complete all as specified and directed. |
| 34 | S&F Powder coatedaluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiumsnap beading, screws, anodised luminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.), complete all as specified and directed. |
| 35 | S&Fpowder coated aluminium frame for doors, window, ventilators with one or more rebates including joining cleats, complete all as specified and directed. |
| 36 | S&F powder coated aluminium grill ( transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing andperation of handles and fixing approved anodised aluminium standard section around thepening, complete all as specified and directed. |
| 37 | Supply only 3mm thick plain sheet glass. ordinary quality n.exc 0.50 sqm each pane, complete all as specified and directed. |
| 38 | S &F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 39 | M&L for factory made 100% Solid WPC Door Frame 125mm x 65mm Double Rebated made from Wood Polymer Composite ( Single Extruded Section Process) Material comparising of virgin PVC polymer of K value 57-60 ( suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive fabricated with frame density of 780 Kg/cbm &manufactured by an ISO 9001-2015 Certified Company, having good screw holding capacity ( Screw Withdrawl Strength of Min. 900N),Minium Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, complete all as specified and directed.Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 40 | M&L for Factory made 30mm thick 100% Solid WPC Laminated Moulded Flush Door Shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive, made from Extrusion process WPC foam sheet Single Extruded (inner) with having minium density not less than 650 Kg/cbm manufactured by an ISO 9001-2015 Certified Company,having good screw holding capacity ( Screw Withdrawl Strength of 2000N(face) & 1100N (Edge), Minium Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant. WPC to be laminated with PVC foil of minium 14 micron thick of approved design pasted on both faces of shutter & Fixing Stainless Steel Butt Hinges of required size with necessary full body threaded star headed counter sunk SS Screws, complete all as specified and directed.Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 41 | M&L for Factory made 30mm thickwire mesh solid PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mmx 15mm for top, lock and bottom rails. MS frames shall have a coat of metal primer of approved make and manufacturer 19mm x 19mm MS square tubes shall be covered with heat molded plain sheets channel made from 5mm (0.25 tolerance) thick PVC sheet of density 600Kg/CBM manufactured by an ISO 90012015 certified company of size 30mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90 degree on either side forming stiles, one of ghe 90 degree bend is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws, 5mm(0.25 tolerance) thick 140mm wide PVC sheet out of which 125 mm shall be flat and 15mm shall be bent in 90 degree on the inner side to form top and bottom rail and 155mm wide PVC sheet out of which 125mm shall be flat and 15mm shall be bend in 90 degree on both side to form lock rail.An additional 5mm (0.25 tolerance) thick PVC srip of 20mm width is to be struck on the interior side of the C-channel using PC solvent cement adhesive. Panel will be of GI/SS wire mess of 24 gauge to be fitted inside area of stiles and rails. The wire mess in top, bottom and lock rail is sealed with 15mm x 15mm tube with steel screw of size 13 x 6mm, 10mm (5mm x 2Nos) thick PVC strip of 25mm width is to be struck and nails on both side of GI wire mess interior at the top, bottom and lock rail. 10mm thick (5mm x 2 Nos) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail door to be fixed to frame with 3Nos MS powder coated butt hinge size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the wall of the MS tube. Other hardwares should be fixed with 19 x 6mm size steel screw etc, complete all as specified and directed. |
| 42 | M & L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications, complete all as specified and directed. |
| 43 | S&F for factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 44 | S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 45 | S & F of 125 mm long extruded anodised aluminium alloy handle, fabricated type, complete all as specified and directed. |
| 46 | S & F of 200 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 47 | S&F for Curtain Rod ofmetal polished CP 25 mm dia fancy type complete and hanging hooks/brackets/ end caps, complete all as specified and directed. |
| 48 | S & F 75 mm long extruded C-21, aluminium alloy Butt hinges, complete all as specified and directed. |
| 49 | Demolition and breaking up drain pipes 150mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed. |
| 50 | M & L for Salt glazed stonewaredrain pipes 150mm bore grade \"A\" laid in trenches and jointed, complete all as specified and directed. |
| 51 | M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 150mm bore pipe, complete all as specified and directed. |
| 52 | S&F in repair 20 mm Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 53 | S&F Rotational moulded polyethlene water storage tank 500 litres capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 54 | S&F in repair 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in PCC type B-1 (1:2:4), complete all as specified and directed. |
| 55 | S&F in repair Grating CP 100 mm size square/round, with or without hole, complete all as specified and directed. |
| 56 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 57 | S&F in repairStop Valves(concealed type) 15mm Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends, complete all as specified and directed. |
| 58 | S&Fin repair Stop Valves 20mmcast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends, complete all as specified and directed. |
| 59 | S & Fin repair PVC connection pipe 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed. |
| 60 | S&F in repairAngle cock 15mm Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends, complete all as specified and directed. |
| 61 | S&F in repair two wayBib Taps 15 mm bore cast copper alloy Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes, complete all as specified and directed. |
| 62 | S & F inrepairs 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 63 | S&F in Repairs Hot & Cold 15mm dia wall Mixer Chromium plated Fancy type, complete all as specified and directed. |
| 64 | S&F in repair Vitreous China squatting pan of pattern“long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rest sany pattern (excluding flushing cisternand flush pipe), complete all as specified and directed. |
| 65 | S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC)siize 580 mm white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe, complete all as specified and directed. |
| 66 | S&F in repair vitereous china wash basin of size 520x450mm of any colour, oval shaped,counter top,including 15mm bore chromium plated pillar tapand CP waste coupling, complete all as specified and directed. |
| 67 | S&F in Repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including flush pipe, brackets, complete all as specified and directed. |
| 68 | S&F in repair brass CP shower rose of size 125mm/200 mm with swivel joints fixing to steel pipe, complete all as specified and directed. |
| 69 | S&F in repair 600 x 450 mm bevelled edge mirrior of selected quality glass mounted on 6mm AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 70 | S & F in repairs brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated bracket, complete all as specified and directed. |
| 71 | S & F in repairs Sheet front glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 72 | S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors,walls with steel clamps, complete all as specified and directed. |
| 73 | S&F in repair 110 mm bore PVC (SWR) bend with access door any radius, complete all as specified and directed. |
| 74 | M&L for Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) 75 mm thick as in plinth protectionlaid in slope 1:12 from outer edge of the wall finished even and fair ,laid in alternate bays including providing 6 mm wide joints through out the thickness of plinth protection in concrete bays and in between walling and plinth protection,joint filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed. |
| 75 | Demolition of Brick/stonework built in cement mortar of any descrption incl all necessary quions arches piilars etc, complete all as specified and directed. |
| 76 | M&L for brick work in cement mortar (1:6) using old size sub class \"B\" bricks in walling, straight or curved on plan exc 6m mean radius, complete all as specified and directed. |
| 77 | S&F in repair for Vitreous China Ware Wash hand basin white, flat back of size 630 x 450mm size including pedastal petturnand screwed for iron pipe and Waste fitting coupling 32mm dia brass chromium plated and 750mm long 32mm dia PVC waste pipe, complete all as specified and directed. |
| 78 | S&F in repair for brass CP soap dish including brass CP screws and wooden cleats, complete all as specified and directed. |
| 79 | S & F in repair for vitreous china squatting pan, orissa pattern size 680 x 470 mm white/colour with integral foot rest (excluding flushing cistern and flush pipe) including provison of lime concrete, complete all as specified and directed. |
| 80 | M&L for 20 mm thick rendering in cement mortar (1:6) in two coats (10cm thick each coat) onnew fair faces of brick/ concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified and directed. |
| 81 | M&L for 20 mm thick rendering in cement mortar (1:4) in two coats (10cm thick each coat) onnew fair faces of stone wall/ concrete surfaces of walls, finished even & smooth without using extra cement with water proofing compound, complete all as specified and directed.Note- Water Proofing Compound measured separately. |
| 82 | M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather coat paint of apex utlima of ASIAN or equivalent make in colour (multi colour pattern as approved by GE) over and including a coat of primer/putty, complete all as specified and directed. |
| 83 | M & L for preparation of old plastered surfaces of walls and applying two coats of exterior weather coat paint of apex utlima of ASIAN or equivalent make in two or more colours pattern over and including a coat of primer/putty, complete all as specified and directed. |
| 84 | S&F in repair for for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 85 | M&L for providing & fixing of 4mm thick designer ceiling board (Make : Everest/Ramco/Everest) in ceiling fixed with screw as per manufactures instructions, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick galvanized steel sheet & of size 24x32x300mm and spaced at 12mm centres securelyfixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 3 mm dia to be fixed by approved rowlplug, leveladjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200 long cross tee with (double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300mm long of white colour all as per instruction including dismantling of old ceiling of any type, complete all as specified & directed. |
| 86 | S & F 100 mm long stainless steel butt hinges, medium weight cold rolled, complete all as specified and directed. |
| 87 | M&L for Walling of Random rubble uncoursed well bonded, bedded and solidly hearted built CM 1:6, complete all as specified and directed. |
| 88 | As per Item No 87.00 here-in-before but except stone. |
| 89 | S&F in repair cupboard shutter 20mm thick(style) factory made panel PVC incl chowkhat frame made out of m.s. tubes 19 gauge for top and bottom rails m.s frame shall be covered with heated moulded plain colour PVC channel having a PVC Sheet strip of 10mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side 10mm (5mmx2) thick of 20mm and 20mm cross PVC sheet and as gap insert for top and bottom rail. Panelling for plain colour PVC sheet to be fitted in the m.s frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying fixing in the frame at site as per specification, complete all as specified and directed. |
| 90 | S & F 20 mm thick PVC solid core construction, with PVC solid core and designer face as in shelves, complete all as specified and directed |
| 91 | M&L for colouredNon skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe colour of tiles over & including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 92 | M&L for factory made 100% Solid WPC Door Frame 90mm x 45mm Single Rebated made from Wood Polymer Composite ( Single Extruded Section Process) Material comparising of virgin PVC polymer of K value 57-60 ( suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive fabricated with frame density of 780 Kg/cbm &manufactured by an ISO 9001-2015 Certified Company, having good screw holding capacity ( Screw Withdrawl Strength of Min. 900N),Minium Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed. |
| 93 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of two or more colour pattern having tensile strength of 550 Mpa as in roof covering/ cladding to wall and curved roof surfaces fixed with self tapping screws, complete all as specified and directed. |
| 94 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of two or more colour pattern having tensile strength of 550 Mpa as in ridge fixed with self tapping screws, complete all as specified and directed. |
| 95 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets in roof, complete all as specified and directed. |
| 96 | S & F Rolled mild steel (Fe-290, Gde E-165) in Roof trusses (framed), trussed, purlins,(Fecrane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed. |
| 97 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed. |
| 98 | Dismantling mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 99 | M&L for minimum 60 mm thick precast PCC interlocking blocks of grade M-35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 in equal proportion of grey and coloured tile to make a pattern as directed, laid over and including 25mm thick sand cushion complete all as specified and directed. |
| 100 | M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-W as in columns or beams, complete all as specified and directed. |
| 101 | M&L for TMT mild steel bars 8 mm dia as in stirrups , spacers &binders and quality conforming to Fe 410-W as in columns or beams, complete all as specified and directed. |
| 102 | M & L for formwork to sides and soffits of floor or roof beems, beam haunchings, girders, bressummers, lintels, cantilevers. Shelves including sup ports, overhangs, etc. also splays between floors and beam etc, complete all as specified and directed. |
| 103 | M & L for RCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and directed. |
| 104 | S&F Rolled mild steel (Fe-290Gde E-165)forCompound girders andStanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc, complete all as specified and directed. |
| 105 | M&L for preparation of New steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 106 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 107 | M&L for machine cut kota stone slab as flooring 18-20mm thick laid, bedded and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, rounding/moulding of edges, over and including 20mm thick screed bed CM(1:3), complete all as specified and directed. |
| 108 | M&L for machine cut kota stone slab as raiser/dado/skirting 18-20mm thick laid, bedded and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing and rounding/moulding of edges over and including 10mm thick rendering CM(1:4), complete all as specified and as directed. |
| 109 | Taking down Shutters of any descriptionexc 1 sq. m and not exc 2 Sqm. with necessary fittings, complete all as specified and directed. |
| 110 | S&F 5mm thick plain sheet glass, complete all as specified and directed. |
| 111 | M&L for makinggood jambs to openings (to foregoing item ) including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work in cement mortar 1:4, complete all as specified and directed. |
| 112 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia, complete all as specified and directed. |
| 113 | Supplying and laying(16mm) of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed. |
| 114 | S & F in repairs for Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed 20 mm dia, complete all as specified and directed. |
| 115 | S & F in repairs PTMT 32mm dia waste coupling (half or full threaded), minimum weight 60 gms) fixed to stainless steel sinks/WHB, complete all as specified and directed. |
| 116 | S & F in repairs for 125mm dia PTMT grating doom with waste hole for wastepipe ( minimum weight 40 gram), complete all as specified and directed. |
| 117 | S&F in repair bib tap 15mm bore, cast copper alloy, CP with crutch or butterfly handles, screwed down for iron pipes, complete all as specified and directed. |
| 118 | S&Fin repair pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure screwed for iron pipes, complete all as specified and directed. |
| 119 | Sch \"A\" Part-II (E/M works)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be amde as per conditions seperately) and making good the disturbed surfaces of walls, floor or ceiling etc to match with existing specifications, complete all as specified and directed. |
| 120 | M&L for point wiring for one light point/ fan point/ one bell/ buzzer point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5sqmm PVC insulated FRLS unsheathed copper conductor singel core cable (green colour) as earth lead and including PVC conduit 25mm dia along with modular sunken boxes of required size with modular white cover plate with frame including cutting chaes to wall making good the disturbed surfaces to mathc with the existing specificaiton, complete all as specified and directed.Note: The colour coding of wiring to be followed as Red/ Yellow/Blue Phase/Neutral/ Earth respectively . |
| 121 | All as per Item No 120.00 here-in-before but for socket outlet 5 Amp on same board. |
| 122 | All as per Item No 120.00 here-in-before but for socket outlet 5 Amp on independent board. |
| 123 | All as per Item No 120.00 here-in-before but for one bell point controlled by one push button. |
| 124 | All as per item No 120.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead, complete all as specified and directed. |
| 125 | S&F modular switch piano, 1 module, 6 Amps SP one way 230 volts, complete all as specified and directed. |
| 126 | S&F modular switch piano, single pole, one way 16 Amps 240 volts, complete all as specified and directed. |
| 127 | S&F modular socket outlet 2/3 pin, 2 module, 6 Amps, 230 volts, ISI marked, complete all as specified and directed. |
| 128 | S&F modular socket outlet,multipurpose, 6/16 Amps, 6 Pin, 2 module, 230 volts, complete all as specified and directed. |
| 129 | M&L for point wiring with two single core 1.5 sqmm (nominal cross section area FRLS PVC insulated unsheathed copper conductor cable and one single core 1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed 1100 Volts, grade multi stranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including medium grade rigid non metalic PVC concealed conduit 25mm dia in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and all requisite accessories such as PVC elbow, Tee, collars, bends etc for mounting switches, socket, fan regulators etc for one light/ fan exhaust fan point controlled by one way switch 6 Amp, complete all as specified and directed.Note: The colour coding of wiring to be followed as Red/ Yellow/ Blue Phase/ Neutral/ Earth respectively. |
| 130 | All as per Item No 129.00 here-in-before but for socket outlet 5 Amp on same board. |
| 131 | All as per item No 129.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead, complete all as specified and directed. |
| 132 | S&F for switch piano flush type 5 Amps SP one way 230 volts, complete all as specified and directed. |
| 133 | M&L for socket outlet 2 in 1, 5 Amps, 5 Pin, flush type, 230 volts, complete all as specified and directed. |
| 134 | S&F for switch socket combination 2 in 1, 15 Amps, 5 Pin, flush type, 230 volts, complete all as specified and directed. |
| 135 | M&L for ceiling rose surface bakelite 3 terminals, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 136 | S&F bell ding dong by one push button, complete all as specified and directed. |
| 137 | S&F modular bell push 6A, 1 module, complete all as specified and directed. |
| 138 | S&F in repair modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100%, 240 volts AC and connecting electrically complete all as specified and directed. |
| 139 | S&F in replacement LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, including removing old/unsv, complete all as specified and directed. |
| 140 | S&F in replacement LED street light fitting 35watt, 230 volts AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with bracket bend to shape made as required of 32/40mm dia not less than 1.2mtr long GI pipe light grade fixed to pole/wall with flat iron clamp of size not less than 40x6mm , complete all as specified and directed. |
| 141 | S&F in replacement LED luminaire 600 x 600 mm, 36 watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivber, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 142 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 143 | Taking out unserviceable ceiling fan and deposit to MES store, supply and replacement with ceiling fan 230volt 50Hz, AC, 1200mm sweep, min air delivery 210CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core 0.75sqmm PVC insulate copper conductor cable,complete all as specified and directed. |
| 144 | M&L for exhaust fan, sturdy Engineering plastic complete with 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 250mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. |
| 145 | S&F for MCB DB TPN 4 way with 200 Amps rated busbar 415V double door confirming to IP 43-IK, complete with din rail, Neutral and earthing bar, complete all as specified and directed. |
| 146 | S&F for MCB TPN 63Amp, 415V, 10KA, \"B\" curve in the DB complete with connection, testing and commissioning, complete all as specified and directed. |
| 147 | M&L in replacement sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed.Note:- MCBs will be measured separately. |
| 148 | M&L for MCB single pole and neutral 240 volts any rating upto 32Amps, with rupturing capacity 10 KA, including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed. |
| 149 | M&L for MCB Single Pole 240 volts any rating upto 5 to 32 Amps, 240Volt, 10 KA, \"B\" curve in the DB complete with connection, testing and commissioining, complete all as specified and directed. |
| 150 | M&L in replacement submain wiring with 2 single core, PVC insulated unsheathed FRLS flexible copper conductor cable of size 6sqmm and one single core PVC insulated unsheathed FRLS flexible copper conductor cable (green colour) of size 6 sqmm as earth lead and including PVC casing caping/ non metalic rigid PVC conduit medium grade and making good the disturbed surfaces to match with the existing specification all as required at site, complete all as specified and directed. |
| 151 | M&L for MCB TPN 415 volts any rating upto 100 amps, with rupturing capacity 10 KA,including providing thimble for out going cables,including removing old/unsv, complete all as specified and directed. |
| 152 | Supply and fix in replacement electric water heater, storage type stainless steel body with copper inner tank and heating element of 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. |
| 153 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, complete all as specified and directed. |
| 154 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core, complete all as specified and directed. |
| 155 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, complete all as specified and directed. |
| 156 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft/loose soil, complete all as specified and directed. |
| 157 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25cm, complete all as specified and directed. |
| 158 | Removing excavated soil not exc50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 159 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I, complete all as specified and directed.Note: Punned thickess i.e 18 cm shall be measured for payment purpose. |
| 160 | M&L for sub class ‘B’ Bricks old size, laid dry flat over the cable butting each other length of cable equal to width of brick, complete all as specified and as directed. |
| 161 | Supply and laying GI pipe 50mm dia light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item, complete all as specified and directed. |
| 162 | M & L in replacement for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including GI pipe 15 mm dia light grade for protection to the extend of7.5 mtr as earthing lead connecting to equipment with provn charcol and salt complete includingPCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
