|
| 1 | Taking down cement plaster on walls etc, and including racking out joints, hacking for key, scrubbing down with water etc, and remove the debris beyond the MD land complete all as specified and directed. |
| 2 | Dismantling timber scantlings 40 sqcm and over in section, unframed work in any position complete all as specified and directed |
| 3 | Dismantling steel work of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 4 | M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in in roof kerbs or mud stops, and kerb rounded or chamfered on edges and including form work complete all as specifed and directed. |
| 5 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roofovering / cladding to wall, fixed with self tapping screws and including dismantling complete all as specified and directed. |
| 6 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including dismantling complete all as specified and directed. |
| 7 | S&F roof trusses (framed) Fe-410W (Gde E-250) quality-A, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle channel or flat sections) and including distance pieces, cleats etc, complete all as specified and directed. |
| 8 | M&L Gypsum Board 12 mm thick in ceiling fixed with screw as per manufacturers instructions, size of grid 605 x 605 mm and including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel withconnecting clips cross the intermediate channel at 457 mm centre to centre and hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long and including demolition complete all as specified and directed. |
| 9 | M&L brickwork with fly ash modular bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 and including demolition complete all as specified |
| 10 | M&L 15 mm thick rendering on brick or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L 15 mm thick rendering on brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L preparition of new plastered wall surfaces and including applying two coats of OBD over a coat of alkali resistant primer laid over and including two coats of wall care putty as per manufacturers instructions complete all as specified and directed. |
| 13 | M & L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion (weather proof) paint having VOC less than 100 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces completeall as specified and as directed |
| 14 | M&L preparation of new steel or iron surfaces of any descriptionover 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 15 | M&L second class hard-wood in scantlings, clean sawn fixed in roof complete all as specified and directed. |
| 16 | M&L preparation of wooden surfaces of any descriptionover 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
