Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-04-2026 | Amendment to Date 04 APR 2026 | Date | 20-04-2026 |
| 2 | 28-03-2026 | Amdt to Date 28 Mar 2026 | Date | 13-04-2026 |
| 3 | 28-03-2026 | Amdt to Date 28 Mar 2026 | Date | 13-04-2026 |
| 4 | 20-03-2026 | Amendment to Date 20 Mar 2026 | Date | 06-04-2026 |
| 5 | 20-03-2026 | Amendment to Date 20 Mar 2026 | Date | 06-04-2026 |
| 6 | 20-03-2026 | Amendment to Date 20 Mar 2026 | Date | 06-04-2026 |
| 7 | 17-03-2026 | Amendment to BOQ 17 Mar 2026 | BOQ | 06-04-2026 |
| 8 | 17-03-2026 | Amendment to BOQ 17 Mar 2026 | BOQ | 13-04-2026 |
| 9 | 17-03-2026 | Amendment to BOQ 17 Mar 2026 | BOQ | 20-04-2026 |
| 10 | 13-03-2026 | Amendment to Date 13 Mar 2026 | Date | 30-03-2026 |
| 11 | 13-03-2026 | Amendment to Date 13 Mar 2026 | Date | 30-03-2026 |
| 12 | 13-03-2026 | Amendment to Date 13 Mar 2026 | Date | 30-03-2026 |
| 13 | 13-03-2026 | Amendment to Date 13 Mar 2026 | Date | 30-03-2026 |
| 14 | 06-03-2026 | Amendment to Date 06 Mar 2026 | Date | 23-03-2026 |
| 15 | 06-03-2026 | Amendment to Date 06 Mar 2026 | Date | 23-03-2026 |
| 16 | 06-03-2026 | Amendment to Date 06 Mar 2026 | Date | 23-03-2026 |
| 17 | 06-03-2026 | Amendment to Date 06 Mar 2026 | Date | 23-03-2026 |
| 18 | 06-03-2026 | Amendment to Date 06 Mar 2026 | Date | 23-03-2026 |
| Sl. No. | Item Description |
| 1 | BLDG WORK |
| 2 | Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 3 | M&L for 15mm thick ready mix cement plaster on brick and concrete surfaces and Ceiling including surface finished even & fair, finishing curing scaffolding upto the height of 7.5 m including taking down of existing cement plaster etc complete all as directed. |
| 4 | M & L rendering 5 mm thick on fair faces of concrete surfaces in CM 1:3 as on ceiling, fascia roof projection etc finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for Preparation of scrapped surface of wall and applying 1.5mm thick damp proof wall care putty complete all as specified and directed. |
| 6 | M&L for Priming plastered and other surfaces with alkali resistant priming paint one coat of primer on wall / ceilingall as per manufacturers instructions. |
| 7 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new /Old surfaces ceiling and wall all as per manufacturers instruction and directed by EIC |
| 8 | M&L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work,complete all as per manufacturers instructions. |
| 9 | Dismantling of brick work built in cement mortar completeall as specified and directed. |
| 10 | M & L brick work with sub class \"B\" bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 completeall as specified and directed. |
| 11 | M & L Except brick work with sub class \"B\" bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 completeall as specified and directed. |
| 12 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius as in half brick thick walls built in CM 1:4 complete all as specified and directed |
| 13 | M&L PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in roof kerb, mud stop, plinth course, copings etc including necessary form work complete all as specified and directed. |
| 14 | Dismantlingof cement concrete (reinforced) in any position and any thickness complete all as specified and directed. |
| 15 | M&L for reinforced cement concrete 1:2:4 nominal mix type B1 (20mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, canopies, deck slabs and in shelves and the like complete all including necessary formworks. |
| 16 | M&L Form work to use and wastage slab, landing and similar work for rough finish surface complete all as specified and directed |
| 17 | S&F mild steel TMTbar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wire (annealed) not less than 0.9 mm dia completeall as specified and directed. |
| 18 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 19 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in floors, sub base, plinth protection etc finished even and smooth complete all as specified and directed. |
| 20 | M&L for full body Vitrified ceramic coloured tiles 10mm thick (Square or rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tileslaid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling complete all as specified and directed. |
| 21 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling and removing from premises complete all as directed. |
| 22 | M&L for Glazed ceramic coloured tiles of size 450x300x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 for receiving wall tiles and dismantling of existing tile complete all as directed. |
| 23 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc including cement screed base, laid, bedded and pointed in any mortar including removal and disposal of debris complete. |
| 24 | M&L for 18-20mm thick Baroda Green Marble (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and directed. |
| 25 | M & L for jet black granite of 20mm thick (Table rubbed and polished) as in cooking platforms, jambs, window cills and the like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shed of granite. |
| 26 | M&L for Providing edge moulding to18 to 20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete completeall as specified and directed. |
| 27 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) n.exc 1.5 sqm each completeall as specified and directed. |
| 28 | Taking down chowkats or framesexc 1.50 sqm and n.exc 4 sqm eachwith shutters (with out taking off shutters from the frames completeall as specified and directed. |
| 29 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame and being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 31 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 32 | M&L 35mm thick factory made solid WPC (Wood plastic composite) both side pre laminated gauged door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed having minimum density of 650 kg/cum as per manufacturer instruction complete all as specified and directed. |
| 33 | S&F 300 mm long aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section aluminum alloy and fixed completeall as specified and directed. |
| 34 | S&F 150mm floor door stopper of aluminium alloy body tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 35 | S&F 100 mm size stainless steel butt hinges medium weight cold rolled stainless steel & fixed completeall as specified and directed. |
| 36 | S&F 125 mm size aluminum handle cast type anodized complete all as specified and directed. |
| 37 | S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed. |
| 38 | M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work (FE 290 Gde E -169). |
| 39 | M&L in repair for 18/19mm thick both side prelaminated colour WPC board for cup board shutter and frame & fixed at site including pair of Auto closing hinges 35 mm of 0 crank (KH-001) openable at 110 degree/Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised width of flap 30 mm and stainless steel handles of 150 mm size complete all as specified and directed. |
| 40 | S&F Chromium plated stainless steel wire basket (storage, cup and saucer, Plate, cutlery, Grain Trolley, Bottle pull out) pull out type Grade 304 with necessary fixing clips including ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity of 50 kgs etc fixed in repair complete all as specified and directed. |
| 41 | S & F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed completeall as specified and directed. |
| 42 | S&F Aluminium anodised barrel tower bolts 200mm long of extruded section. |
| 43 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 44 | S&F factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mmx58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mmx20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 45 | S&F made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 46 | Supply only 4.8mm thick sheet glass ordinary quality in squares exc 0.5 Sqm in each pane complete all as directed. |
| 47 | S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long & 15/20mm dia brass ball valve with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed |
| 48 | S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 49 | S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubingpipe complete all as directed. |
| 50 | S&F Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, coupling, washers and wastes including bedding in cement morter on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410 mm x330mm fixed in repair complete all as specified and directed. |
| 51 | S&F Stainless steel plate rack of size 24 inch X 24 inch X 10 inch complete all as directed. |
| 52 | S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush for UF soft close slim seat cover, hinges fittings, conversion bend, fixing accesories complete all as specified and directed. Make : Jaquar Cat part No OPS-WHT15753NS250UFSMZ/ Cera cat part No S1013105/Kajaria cat part No KB-3007 |
| 53 | S&F Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass 32m dia coupling, waste pipe fixed in repair complete all as directed. Make : Jaquar Cat part No Jaguar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent. |
| 54 | M&L in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. |
| 55 | S&F in repair Corner glass shelf assembly consisting of 5.5mm thick sheet with bracket complete all as specified and as directed. |
| 56 | S&F Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.completeall as directed. |
| 57 | S&F in repairs CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 58 | S&F in repairs CP brass hot & cold 15mm dia sink mixer swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 59 | S&F in repairs CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provnwith connecting legs & flangs in complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 60 | S&F in repairs 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series. |
| 61 | S&F in repairs CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. |
| 62 | S&F in repair Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of with hole for waste pipe complete all as specified and directed. |
| 63 | S&Fin repair PVC connection 15 mm size brass nuts of length 450 mm long completeall as specified and directed. |
| 64 | S&Fin repair brass Chromium plated shower roses 125mm size with or without swivel joints with extension CP arm, including fixing to steel pipe or union Complete all as directed |
| 65 | S&F in repair brass chromium plated towel rail, 20mm dia \"D\" type 60cm long between flanges complete all as specified and directed. |
| 66 | S&F in repair brass chromium plated towel ring completeall as specified and directed. |
| 67 | S&F in repair CP Soap dish fixed to plugs with chromium plated brass screws complete all as directed. |
| 68 | S&F in repair Stainless Steel toilet paper holder with flat recessed Complete all as specified. |
| 69 | M&L Drapery rod in any length, high strength stainless steel pipe having outer dia 25-28mm a pair of brackets & a pair of stainless steel finials, fixed in repair complete all as specified and directed. |
| 70 | Dismantling of 75mm/100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required. |
| 71 | S & F 110mm bore (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified |
| 72 | S & F 75mm bore (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor completeall as specified |
| 73 | S&F PVC (SWR) Pipes 110mm bore single socketed in any with rubber ring joint fixed to wall. |
| 74 | S&F PVC (SWR) Pipes 75mm bore single socketed in any with rubber ring joint fixed to wall. |
| 75 | S & F PVC bends any radius 75mm bore completeall as specified and directed. |
| 76 | S & F PVC bends any radius 110mm bore (SWR) completeall as specified and directed. |
| 77 | S & F PVC (SWR) junction single (Tee) 75mm bore equal or unequal with access door complete all as specified and directed. |
| 78 | S & F PVC (SWR) junction single (Tee) 110 mm bore equal or unequal with access door completeall as specified and directed. |
| 79 | M & L PVC(SWR) floor trap plain with grating including jointing with solvent cement 75mm bore outlet completeall as specified and directed. |
| 80 | M&L for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. |
| 81 | M&L 15mm bore CP pillar taps cast copper alloyfancy type with aerator fixed in repair complete all as directed. |
| 82 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 83 | S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, on chajja and facia by self tapping screws and inserted into wall by groove cutting and making good the surface complete all as directed by Engr-in-charge. |
| 84 | Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quqlity B) |
| 85 | M & L forRooftreatment by applying a coat of cold applied oil based bituminous primer over cleaned surface@ 0.50Kg/Sqm, andlaid 3mm thick APP modified five layer polymeric membrane, minimum weight not less then 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer\"s instructions over 40mm thick screed in cement mortar 1:3 with waterproofing compound with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves & make good in cement mortar 1:3,finally finished with bituminous aluminium paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab any description, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil out side the defence premises, complete all as specified anddirected. |
| 86 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear mtr including drilling and plugging holes etc. in apron. |
| 87 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as directed |
| 88 | M&L for Vitreous china squatting pan, \"Orissa\" pattern, size 580 x 440 mm white, with integral foot rests including replacement of \"P\" or \"S\" CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed. |
| 89 | S&F PVC low level flushing cistern 10 Ltr capacity syphonic action type white including ball valve, float valve and handle including bracketand PVC flush pipe fixed in repair complete all as specified and directed. |
| 90 | S&F false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC 0.60 to 0.75 as per IS 8225 :1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 00.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of szie 15x32mm of length 600mm to form grid module of size 600 x600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x2mm.Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawing and as per directions of the Engineer-In-Charge with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. |
| 91 | M&L for welded steel wire fabric weight n exc 4kg/sqm fixed/welded to wood or steel members complete all as directed |
| 92 | Taking down existing broken portion of upward, downward / inverted facia or roof slab or visible concrete reinforcementof any thickness and shape and surface area n. exc 0.50 Mtr wide repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throatingover and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and treatment of brokan concrete reinforcement, applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ) |
| 93 | Excavating in trenches in soft/loose soil, n.exc. 1.5m wide and n.exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/disintegrated rock . |
| 94 | M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 200 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested. |
| 95 | M&L in repair for DWC(Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gradient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed. |
| 96 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm. |
| 97 | Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point. |
| 98 | S&F in repair Factory made heavy duty precast RCC Manhole cover confirming to IS 12592 (Part -1 & II ) having clear opening 1200mm x 450 mm x 75mm of M-30 Grade of concrete and suitably reinforced with strong vibrating compaction by vibratory table including providing MS hook duly black painted, complete all as specified and directed. |
| 99 | M & L brick work with sub class \"B\" bricks, straight or curved on plan exc 6m mean radius built in cm 1:4 completeall as specified and directed. |
| 100 | M&L 15 mm thick rendering onbrick work or concrete surface inCM 1:4 mixed fair face and smooth with neeru finish to plaster as specified andcompletedirected by Engr in Charge |
| 101 | M&L for Construction of brick soak well 2.40m dia and 4.50 m deep, excavation in soft/ loose soil for foundation in PCC 1:3:6 using 40 mm graded stone aggregate, honeycomb brick work in cement mortar 1:4, RCC 1:2:4 type B-1 as in slab, filling with brick bats including necessary earth work complete and all as specified and directed. |
| 102 | M &L PCC 1:2:4 type B-1 (using 20 mm graded aggregate)as in roof kerb, mud stop, plinth course, copings etc including necessary form work complete all as specified and directed. |
| 103 | M&L for cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately). |
| 104 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified. |
| 105 | S&F in repair Factory made Precast plain / perforated RCC Drain/ manhole cover size (900x 450 x 50 mm of M-30 grade of concrete reinforced with8 mm dia TMT bar of Fe- 500 grade at 150 mm c/c spacing both waywith strong vibrating compaction by vibratory table including providing MS hook duly black painted complete all as specified and directed. |
| 106 | M&L PCC 1;4;8 type D-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floorcomplete all as specified and directed |
| 107 | M & L for 100 mm thickPCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floors/sub base etc finished even and smooth complete all as specified and directed. |
| 108 | M&L for Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound Grade \"A \" etc complete all as directed. |
| 109 | M&L for Vitrified exterior colour tile of capsule pattern size30 cm x 30 cm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in CM 1:6 including dismantling of existing tile complete all as specified and directed. |
| 110 | Excavation in post holes (similar holes) each n exc 0.5 cm getting out returning filling in and ramming earth or broken boulders mixed with earth around in layers not exc 25 cm watering and removing surplus soil to distance n exc 50 m and making good surface in hard / dense soil. |
| 111 | Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in hard / dense soil. |
| 112 | M&L PCC 1:2:4 type B2 (using 40 mm graded aggregade) in foundation for post holes. |
| 113 | S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works congorming to Fe 290Gde E- 165 |
| 114 | M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 115 | S&F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fitted with washers and one hexagonal or square nut complete all as directed. |
| 116 | S&F in repair PVC coated MS galvanised chain link fencing of weight not less than 4.0 kg/sqm, PVC coating of 1.5mm and mesh size of 50 x 50mm of any type of standard rail straining bolts etc aperture and dia as decided by Engineer-in-charge. |
| 117 | MS round bars 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm and backing ends and binding with & include MS wire (a headed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410W (grade E-250) quality A or Fe 290 (grade E- 165) |
| 118 | M&L for Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint)over a coat of primer complete all as directed. |
| 119 | E/M |
| 120 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. |
| 121 | Taking down existing exhaust fan of any capacity and make serviceable by replacing the unsv parts includingpreparation of old painted surface body and blades of exhust fan of any capacity ,cleaning foreign material ,fillingcavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paintand kept in safe custody and refixingat site after compltion of wiring work. |
| 122 | Taking down water Heater of any capacity and make serviceable by replacing unsv part including descaling the inner container with cleaning solution including preparation of old painted surface bodyof geyser of any capacity ,cleaning foreign material ,fillingcavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paintand kept in safe custody and refixing at site after compltion of wiring work. |
| 123 | Taking down the existing Energy meters carefully and proper noted down the qtr NoMeter No and reading with dateand kept in safe custody for re-fixing at site after compltion of bldg workcomplete all specified and directed. |
| 124 | Taking down old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed. |
| 125 | Taking down old unsv T/L, Lamp,Security light of any size and capacity all as directed. |
| 126 | Taking down existing ceilingfan of any capacity andmake serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,fillingcavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paintand kept in safe custody and refixing at site after compltion of bldgwork. |
| 127 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. |
| 128 | Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in non rigid PVC concealed conduit not less than 25mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire: Finolex, Havells, Polycab Note: (i)The quoted rates shall be deemed to be inclusive formaking good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. |
| 129 | (a) One light point controlled by one, one way switch 5 Amps |
| 130 | (b) One fan point point controlled by one, one way switch 5 Amps . |
| 131 | (c)One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 132 | (d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 133 | All as per item above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 markedfor 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. |
| 134 | Supply and fix Switch piano, flush type, single pole one way, 5 Amp complete all specified and as directedMake:- Anchor/Legrand/Havells |
| 135 | Supply and fix Switch piano, flush type, single pole ,one way15 Amp complete all specified and as directed |
| 136 | Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 Amp complete all specified and as directed |
| 137 | Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 15 Amp complete all specified and as directedMake:- Anchor/Legrand/Havells. |
| 138 | Supply and fix Electronic step rotary type fan regulator 100W, 230 volts AC 50Hzcomplete all as specified and directedMake:- Anchor/Legrand/Havells |
| 139 | Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in non rigid PVC concealed conduit not less than 25mm diawith all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including Modular metal flush boxes 1.6 mm thick, upto 60 mm deep of required size factory made for mounting modular switch, regulators etc with inner /outer cover and frame(white) ISI marked, fixed with brass screwsincluding taking down unsv point wiringof any sizefor the following. Note: (i)The quoted rates shall be deemed to be inclusive formaking good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. |
| 140 | (a) One light point controlled by one, one way switch 5 Amps |
| 141 | (b) One light point controlled by two, two way switch 5 Amps |
| 142 | (c) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps |
| 143 | (d)One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 144 | (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 145 | (f) One bell point controlled by one, bell switch 5 Amps ( One For Officers Qtr and one for officersQtr toServent Qtr) |
| 146 | All as per item No.139 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 markedfor 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. |
| 147 | All as per itemabove but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 markedfor 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. (ForGeyser) |
| 148 | Supply and fix modular switch 1 way 6A, 1 Module |
| 149 | Supply and fix modular switch 2 way 6A, 1 Module |
| 150 | Supply and fix modular switch 1 way 16A, 1 Module with indicator lamp |
| 151 | Supply and fix modular bell push 6A, 1 Module |
| 152 | Supply and fix modular socket 6A, 2/3 pin combined 2 Module |
| 153 | Supply and fix modular socket 6A/16A, 2/3 pin combined 2 Module |
| 154 | Supply and fix modular fan regulators step type 2 module 120W . |
| 155 | Supply and fixlamp holder PVC /Polycarpebonated typewith back plate suitable for batten fittings all as specified and directed. |
| 156 | Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated bodycomplete all asdirected. Make: Anchor, Crab tree, Ess Ess Kay |
| 157 | Suply and fixfor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 158 | Supply and Fixingin replacementhigh prssure die cast alluminium LED Batten light fitting 20W ,125 lumens /watt,IP-20,colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV |
| 159 | Supply and Fixingin replacementhigh prssure die cast alluminium LED Batten light fitting10W,100 lumens /watt, IP-20,colour temp not less than 5700,,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV |
| 160 | Supply and Fixingin replacementhigh pressure die cast aluminium led secutiy light fitting 25W , not less than 100 lumens /watt,IP-66colour temp not less than 6500, inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 4 KV |
| 161 | Supply and fix Metal finish wall light with maximum bulb wattage 9 watt, base of the lamp should be E27, colour of the fixture is white & silver with chrome finish and having rectanguar shape for aesthetic look.connected the same with using PVC sheathed and insulated 3 core flexiblecopper conductor cable including all accessories and fixing arrangement |
| 162 | Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Brushless direct current motor (BLDC) including taking down old unsv serviceable fan and deposited to the store. |
| 163 | S & F sub main wiringwith2 run PVC insulated unsheathed FRLSH cable 1100 Volt grade,with multi stranded copper conductor drawing in existing Concealedconduitincluding one runPVC insulated unsheathedcable with multi stranded copper conductoras a earth continuity and connected upto DBof following sizes complete all as specified and directed.Note:Tworun of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. |
| 164 | (a) 2 x 16 Sqmm + 1 x 16sqmm (From Main DB to Sub DB of Qtr ) |
| 165 | (b)2 x 4+ 1x4 Sqmm( For AC Sub main and submain fro officer accn to servent qtr) |
| 166 | Supply and fixmetal body exhaust fan 300 mm sweep, 900 rpm230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc including taking down old unsv serviceable exhaust fan and deposited to the store. complete all as specified and directed. |
| 167 | Supply and fix exhaust Fan ,made of sturdy Engineering plastic complete with louvers shutter,voltage 230volts ,50HZ,RPM 1200,copper winding of sweep 250 including cutting holes on walland making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. |
| 168 | S&F Water heater (Geyser) storage type, electric,capacity 25 litres five star rated AC SP 230 volts, 50 Hz, vertical mount type, shockproof and rustproof metal body, stainless steel inner container, high efficiency heating element, autocut thermostate, pressure release safety system,NRV , fire retardent cable with 3 pin plug top, white colour including fixing accessories like fastensers, nuts, washerscomplete all as specified and directed. |
| 169 | Material and labour for earthing with galvanised steel earth plate electrode60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(oneearthing for each main Panel ) |
| 170 | Fixing only and connecting up serviceableelectric meter taking down against item No 4 |
| 171 | Supply and fix electronic meters tempre proof LCD display with polycarbonate cover 230V 10-60 Amp, accuracy class -I , 50 hz, confirming to IS 13779, IP-54, with parameters to show data, time current reading, load,PF, voltage and KWH and takingdown old electric meter and deposit in MES store complete all as specified and as directed |
| 172 | S & F in replacementMCB DB, sheet metal enclosures double door.The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:- |
| 173 | (a) MCBDB SPN,12 ways( For Light DB) |
| 174 | (b) MCB DB SPN,8 ways . (For Power DB) |
| 175 | S & F in replacementsheet metal enclosure, single pole and neutral withtwo pin and earth plug and socket with and including one single pole MCB 20 Amps,complete all as directed. |
| 176 | S & F inreplacementMCB SP /SPN240 volts \"B\" Curve 10 KA . including connection with suitable size copper lugs of following capacity |
| 177 | (a) MCB SP 240 volts, 50 Hz capacity 6-32 Amps |
| 178 | (b) MCB SPN 240 volts, 50 Hz of capacity 40 Amps ( 12 Way Light DB) |
| 179 | (c) SPN 240 volts, 50 Hz capacity 63 Amps( 8 Way power DB) |
| 180 | (d) MCB SP 240 volts, 50 Hz capacity 63 Amp |
| 181 | S & F inreplacement Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable capacityfully insulated copper Bus Bar for each phaseand 02 neutralshroudedbar ,2 earth bar and cable tie for cable managementwith reversible door for IP-43 protection,415 voltand suitable for fixing FP MCCB 100/125 Amps as incomer andcombination of SP/TP MCBs asoutgoings offollowing capacity including taking down old unsv MCCB DB,s.Note: Suitable MCCB and outgoing MCBs will be measuredand paidseparately under relavant items of this schedule. |
| 182 | (a) 4 Way VTPN DB (FP MCCB +12 MCB,C). Make :legrandCat No. 507745 equvilent in L&T, ABB, Schneider |
| 183 | S & FMCCB ,4 poleICS=100% ICU at 415 volts with rupturing capacity 16 KA with thermal-magnetic release and adjustable overload setting . The MCCB shall have a Mechanical life = 40000 operations & Electrical life = 8000 operationsof following capacity complete all as directed. Make: Legrand, L&T, ABB, Schneider |
| 184 | (a)100 Amps |
| 185 | (b)63 Amps |
| 186 | S & F LED lamp 12 W suitable for Angle holder pendant fittings |
| 187 | Supply and fixconcealed in wall Rigid non metalic PVC conduitof , inclusive of boxes (junction/terminal)but inclusive of all tees,bend ,elbow reducers, bell mouth tube ends and fixing acessories such as couplers,lock,nut saddles,pipe hooks all as specified and directed.Make of conduit: Finolex, Ess Ess Kay, ICLNote : The rate for cutting and chasing of wall to flush the conduitandmaking good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface shall deemed to be included inthe quoted rate . |
| 188 | (a) 20mm dia ( For TV and Tele cable) |
| 189 | S&F RJ-11 Double socket with shutter 1 module with outer cover and frame including metal modular flush box complete all as specified and directed . |
| 190 | S&F TVsocket1 module with outer cover and frame including metal modular flush box complete all as specified and directed |
| 191 | S &F Polycarbonatd 2 pair 0.4mm thickness Telephone wire including connecting up to the Tele socket complete all as specified and directed . |
| 192 | S &F RG-6 black copper PVC Insulated TVwire including connecting up to the TV socket complete all as specified and directed . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
