|
| 1 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 2 | M & L for rendering15 mm thick plaster in cementmortar 1:6 on fair faces of brick work or concrete surfaces of wall , even and fairfinished without using extra cement. |
| 3 | M&L for rendering 15mm thick in CM 1:4 onfair faces of brick , external surfaces finished fair & even and smooth (without using extra cement)complete all as specified and directed. |
| 4 | M & L fo rendering5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finished even and fair without using extra cement. |
| 5 | M& L for Preparing of old distemperedsurfaces including washing rubbing down and stopping of old distempered and painted surfaces including complete removal of existing treatment complete and applying two coats of oil bound distemper on wallscomplete all as specified. |
| 6 | M&L for 1 mm thick wall putty on old surface of wall where required complete all as specified |
| 7 | M& L for Preparing of new plaster surfaces of wall and applyingtwo coat of oil bound distemper on walls after applying 1mm thick wall care putty to obtain smooth surfaces, complete all as specified. |
| 8 | M& L for Preparing of old distemperedsurfaces including washing rubbing down and stopping of old distempered and painted surfaces including complete removal of existing treatment complete and applying two coats of oil bound distemper on ceiling , complete all as specified. |
| 9 | M& L for Preparing of new plastersurfacesand applying two coats of oil bound distemper on ceiling after applying 1mm thick wall care putty to obtain smooth surfaces, complete all as specified. |
| 10 | M& L for Preparing of new plaster surfaces of wall and applyingtwo coat of cement base paint on wall surfaces, complete all as specified. |
| 11 | Preparing of old distempered surfaces and applying one coats of oil bound distemper on walls and projection complete all as specified. |
| 12 | Preparation of old or previously treatedsurface of ceiling and applying one coat of distemper oil emulsion, complete all as specified. |
| 13 | Preparation of old wooden painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified. |
| 14 | Preparation of old steel painted surfaces over 10 cm width orgirth and applying one coat of synthetic enamel paintcomplete all as specified |
| 15 | S&F in repairs stainless steel sink with drainage board made of stainless steel 1.00 mm thick with rawl plug washers and waste pipe including bedding in cement mortar to dwaef wall or including fixing M S cantilever brackets of size 25mmx25mm x4mm thick and connecting union to pipe, overall size of 915 mmx460mmbowl size 10mx330mmx160mm complete all as specified and as directed |
| 16 | S&F in repairs stainless plate racks of size 900mmx900mm x250mmfixed to wall with rowl plugs including PVC quttions and suitable size of screw or fasterners to fix on kitchen wall including taking down of old damaged plate rack of any pattern,complete all as specified and as directed by engineer-in-charge. |
| 17 | S&F in repairs Chromiumfancy typeCerter hole wash basin mixer of standard quality for mixing hot & cold water as approved by Engr-in-Charge with fitting etc Complete all as specified and directed.Make-Jaquar Escco,Parryware,Gohre |
| 18 | S&F in repair single lever sink mixer with swinging spout on upper side (wall mounted) with connecting legs and wall flanges fixed to iron pipe 15 mm bore complete all as specified and directed Make-Jaquar-Essco,Parryware,Gohre |
| 19 | S&F in repairs Chromium fancy typewall mixer 3 in 1(Provision of OHS ) of standard quality for mixing hot & cold water as approved by Engr-in-Charge with fitting etc Complete all as specified and directed.Make-Jaquar Escco,Parryware,Gohre |
| 20 | M & L forrepairsto existing towall mixer 3 in 1/center hole mixture like as Leg, extension nipple etc complete all as specified and directed. |
| 21 | S&F in repairs stainlesspeg set6 fixed with wooden gutties and screws to wall surfaces. |
| 22 | S&F in repairs stainlesssteel toilet paper holder fixed with wooden gutties and screws to wall surfaces. |
| 23 | S&F in repairs stainless steel soap tray fixed with wooden gutties and screws to wall surfaces.complete all as specified |
| 24 | S&F in repair 300 mmcorner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard complete all as specified |
| 25 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm.complete all as specified.Make Prayag or equivalent |
| 26 | S&F in repairs Health faucet with,1 mtr longflexible tube with wall hook complete all as specified.Make Make-Jaquar Escco,Parryware,Gohre |
| 27 | S&F in repair jets of EWC\"s with required sizeof jet pipe (flexible) and connections etc complete all as specified. Make Prayag Cat No BEA 17 or equivalent . |
| 28 | S&F in repairs 32mm bore diaof CP brass waste coupling suitable for WHB complete all as specified. |
| 29 | S&F in repairs bottal trap 12\"\" suitable for WHB complete all as specified. Make Prayag Cat No BEA 28 or equivalent . |
| 30 | S&F in repairs 40 mm bore diaof CP brass waste coupling suitable for Kitchen sink with waste pipe complete all as specified. |
| 31 | S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, fixed in repair.Make Parryware,Hindware ,Cera |
| 32 | S&F in repair 5mm thick of size 600x450mm bevelled edge mirror (Frameless of shape Square and rectangle in shape) of selected quality glass and fixed with chrome round mirror clip set (set of 4 clips) having polished edge complete all as specified and directed by Engr-in-charge. |
| 33 | S&F in repairBrass chromium plated towel ring of size 150 mmcomplete all as specified Make-Jaguar Cera Grohe |
| 34 | S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, fixed in repair. |
| 35 | M & L in repair for Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repair, complete allall as specified. |
| 36 | S&F in repair 15 mm bore dia angle valve wall flange cromium plated screwed down both ends for iron pipe fixed in repair, complete all as specified and directed by Engr-in-charge |
| 37 | S&F in repair Wash hand basin vitreous china, angle back, size 550mm x 400 mm, white( excluding taps, waste, chain and plug and porcelain stopper) but including bracket also also including cuttng for and pinning in ends of brackets or errecting stand but exclusive of fixing of supply and waste pipe.Make Parryware,Cera or equivalent |
| 38 | S&F in repairs 15 mm CP fancy type bib tap cast copper alloywith crutch or butter fly handle, scewed down, screwed for iron pipe or for brass ferruleand fixed. |
| 39 | S&F in repair stainless steel grating 100mm square/round with or without hole. |
| 40 | S&F in repair stainless steel grating 75 mm square/round with or without hole |
| 41 | S&F in repair vitreous china wash down closet (pedestal pattern), white (including seat cover but excluding flush pipe, flushing cistern) ,including connection to trap and drain and flushing pipe anti-syphonage pipe, flushing cistern etc, complete all as specified and directed by Engr-in-charge.Make Parryware,Ceraas approved by AGE(I) |
| 42 | S&F in repair chromium plated over head showerwith arm 225mm with flangefixing to steel pipe or unioncomplete all as specified and directed by Engr-in-charge. |
| 43 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed by Engr-in-charge. |
| 44 | S&F 3.00mm thickpin head glass and glasing with oil putty including glazing clips in Squres/Ractangle n.exc 0.5 Sqm in each pane fixed in repairscomplete all as specified and directed by Engr-in-charge. |
| 45 | Taking down doorshutterexc. 1.0 Sqm and not exc.2.0 Sqm all as complete all as specified and directed by Engr-in-charge. |
| 46 | Taking down of chowkhats or frame with shutters n.exe. 1.5 Sqm each without taking of shutter from the frame complete all as spd and directed by Engr-in-charge. |
| 47 | Taking down of chowkhats or frame with shutters exe. 1.5 Sqm but nexc. 4 Sqm each without taking of shutter from the frame complete all as spd |
| 48 | S&F in repair for solid PVC door frame (single rebated) of size 50mm x47 mm made out of 5 mm wood grain printed PVC sheet and edges will be painted to match the printed sheetsreinforced with MS square tube complete all as specified& shown ondrawing. |
| 49 | S&F in repair factory made solid panel PVC door shutter 30 mm thick (style) consisting of framemade out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet syrip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail and bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC Sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC Sheet beading and jointed together with solvent cement suppling and fixing in the frame at site |
| 50 | S&F in repair Stainless steel , anodised barrel tower bolt of extruded section of 150mm long complete all as specified complete all as specified and directed by Engr-in-charge. |
| 51 | S&F in repair Stainless steelhandles extruded type ,anodised of 150 mm size complete all as specified and directed by Engr-in-charge. |
| 52 | S&F in repair 100 mm size butt hinges medium weight cold rolled stainlesssteel complete all as specified and directed by Engr-in-charge. |
| 53 | S&F in repair for 250 mm size stainless steel sliding door bolt not less than 12 mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate , complete all as specified and directed by Engr-in-charge. |
| 54 | S&F in repair factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grmscomplete all as specified. |
| 55 | S&F in repair factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x125mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grmscomplete all as specified. |
| 56 | M&L for providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre(wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grmscomplete all as specified. |
| 57 | S&F in repair 30 mm thick factorymade solid WPC(Wood plastic composite) moulded gauged door shutter comprimising of virgin polymer of K values 58-60 (suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawl strength of 1800N (Face) & 900 N (edge)minimum compressive strength of 50 N/mm2 and resistance to spread of flame of class A Category with property of being termite/borer proof,water/moisture proof and fire retardant.WPC to be laminated with PVC Foil of minimum 14 microns thick of approved design plasted with hot melt adhesive on both faces of shutter with wiremesh in any no of division min 4 no pannels with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixedwith 15X15 square wpc beading in side rails with screwing 8X28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when be remove or fix again after changing of wire mesh when needed complete all as specified |
| 58 | Supply onlyStainless steelwire cloth 0.36 mm nominal dia of wire and average width of aperture of 1.40 mm fixed with stainless steel staples, complete all as specified and directed by Engr-in-charge. |
| 59 | S& F in repair Stainless steelwire cloth 0.36 mm nominal dia of wire and average width of aoerture of 1.40 mm fixed with stainless steel staples, complete all as specified and directed by Engr-in-charge. |
| 60 | M & L for Framed work such as grills, grating doors or gates etc. of angle with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of watertanks and similar work confirming to Fe 290 Gde-E-165. |
| 61 | M&L for repair to aluminium door or window of any size, shape and escription including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, handle,locking arrangement ,etc to make door or window fully functional, complete all as specified and as directed by Engr-in-charge. |
| 62 | S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed . |
| 63 | S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality both side plainwhite color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed . |
| 64 | S&F Stainless steel handle 200 mm long American type fixed with screw complete all as directed by EIC |
| 65 | S & F 40 mm width of flap when open continuous (piano) hinges, mild steel, bright finish or electrogalvanised |
| 66 | S&F 100 mm Hasp and staple, stainless steel, including bolt to hinge plate and fixed with screws |
| 67 | S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen. |
| 68 | S&F in repairs Stainless steel multipurpose bracket in wooden drawer/partitions for storing rations of various types made of 4mm dia stainless steel rods, fixed in side partitions etc fixed , complete all as specified for modular kitchen.Make : Usha shriram entp pvt ltd or equivalent. |
| 69 | S&F in repair Stainless steel luddle-craddle hanging stand for cutlery all as specified and directed by Engineer-in -charge for modular kitchen. |
| 70 | S&F in repair Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen. Complete all as directed by Engr-in-charge. |
| 71 | Demolition offloor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles from site and rubbish off the premises. |
| 72 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified. |
| 73 | M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as spd. |
| 74 | M&L for non skid ceramiccoloured tiles7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match the surface complete all as specified and directed. |
| 75 | M&L for joint free (300mm x 450mm) x 8 to 9 mm thick coloured glazed ceramic tilesas in dado/vertical services set and jointed in neat cement slurry and pointed in colouredcement to match the surface complete all as specified and directed. |
| 76 | Dismantling and taking down existingold unserviceable PVC water tanks of capacity of any size completeall as specified and directed by Engr-in-charge. |
| 77 | Supply & Fixing in replacemetntRotational moulded (double layered as per IS 12701) polythylene water storage tank cylindrical vertical with closed top hoisted capacity upto 500ltrs ISI marked with valid CMLNo and fixed in positioncompleteall as specified and directed by Engr-in-charge. |
| 78 | S&F 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minmum weight 210 gms). |
| 79 | S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minmum weight 210 gms). |
| 80 | Cleaning and removing all scale and dirt etc from tanks exc 500 ltr and n.exc 1000 ltr capacity and from mouths of circulating pipe etc |
| 81 | Taking down galvanised tubing of 15 mm bore incl cleaning for refixing in any position floor, wall etc, complete all as specified and directed by Engr-in-charge. |
| 82 | Taking down galvanised tubing of 20 mm bore incl cleaning for refixing in any position floor, wall etc, complete all as specified and directed by Engr-in-charge. |
| 83 | S&F 15 mm bore dia medium graded galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed by Engr-in-charge. |
| 84 | S&F 20 mm bore dia medium graded galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed by Engr-in-charge. |
| 85 | S&F in repair 32mm bore PVC waste pipe for WHB, complete all as specified and directed by Engr-in-charge. |
| 86 | S&F in repair 40mm bore PVC waste pipe for kitchen sink , complete all as specified and directed by Engr-in-charge. |
| 87 | S&F stainless steel curtain rod of 20 mm dia with fixing brackets,incl sidebrackets, finals complete all as specified. |
| 88 | M&L for cleaning of roof including cleaning of small scrubs ,plant leaves,vegetations etc in building roof complte all as specifeid and directed. |
| 89 | S&F helical door springhinges mild steel with steel wire spring stove enamelled black 150mm size complete all as specified and directed by Engr-in-charge. |
