Tender For Providing And Fixing Godown Platform Roofing Along With Trusses For Platform At Fsd Moga And Providing Expanded Metal Jali At Fsd Moga, Fsd Dharamkot, Fsd Baghapurana And Fsd Nihal Singh Wala Under District Moga, Dharamkot-Punjab
TDR : 54071942
Tender Notice
BOQ
6 Days Left
Dharamkot
Punjab
Tender For Providing And Fixing Godown Platform Roofing Along With Trusses For Platform At Fsd Moga And Providing Expanded Metal Jali At Fsd Moga, Fsd Dharamkot, Fsd Baghapurana And Fsd Nihal Singh Wala Under District Moga
Name of Work:Providing and fixing godown platform roofing along with trusses for platform at FSD Mogaand providing expanded metal jali at FSD Moga, FSD Dharamkot, FSD Baghapurana and FSD Nihal singh wala under District Moga.
Sl. No.
Item Description
1
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
2
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
3
Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade :new work (two or more coats)
4
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
5
Extra for providing and fixing wind ties of 40x 6 mm flat iron section
6
Providing and fixing expanded metal with diagonal of rhombus 20x60 (with weight not less than 3.50 kg per sqm),welded by gas welding to mild steel flats 18mmx3mm & fixed with screws to M.S.angle 30x30x4mm (weight not less than 1.75kg per metre) with 15x3mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required as per drawing including applying a priming coat of approved steel zinc chromate primer.
7
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :75x75 mm with 75x75 deep chase
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
