|
| 1 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 2 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 4 | Two or more coats on new work |
| 5 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 6 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 7 | 15 mm nominal bore |
| 8 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 9 | 45 cm length |
| 10 | 15 mm nominal bore |
| 11 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 12 | Semi rigid pipe |
| 13 | 32 mm dia |
| 14 | Providing and fixing brass bib cock of approved quality : |
| 15 | 15 mm nominal bore |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : |
| 17 | Forshuttersofdoors,windows&ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 18 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 19 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 20 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 21 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. |
| 22 | Anodized (AC 15) aluminium |
| 23 | Providing and fixing soil, waste and vent pipes with UPVC pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. |
| 24 | 65 mm diameter |
| 25 | Providing and fixing UPVC moulded bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete forUPVC Soil pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 26 | 65 mm dia |
| 27 | Providing and fixing UPVC mouldedsingle equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete forUPVC Soil pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 28 | 63x63x63 mm |
