|
| 1 | Dismantling of reinforced cement concrete or reinforcement brick work, including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 2 | Dismantling of brick work or stone work in lime or cement mortar and including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 3 | Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m ,as directed by engg-in-charge:2.1.1 All kinds of soil. |
| 4 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size |
| 5 | Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Brick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and size. cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Providing & laying in position specified grade of reinforced cement cocrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeupto plinth level. Thermo mechanically treated bars of grade Fe-500D or more. |
| 9 | 15mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement : 4 find sand) |
| 10 | 12mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) |
| 11 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 12 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over @ 1.25Ltr/10Sqm including one coat of primer apllied @ 0.75Ltr/10Sqm coat curing and cost of all material, labour T&P etc all complete. |
| 13 | Supply & hoisting of sintex or equivalent high density polytheleneseamless of piece moulded tanks and placing the same in propee position including all taxes, labour T&P etc for proper completion of work. Tank should be ISI marked, Sintex or equivalent. |
| 14 | Providing and fixing of Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplt, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing,. This includes jointing of pipes & fitting with one step CPVC sovent cement and the cost of cutting chases and making good the same including testing of joints complete as per directed by Engg-in-charge.20mm nominal outer dia pipes |
| 15 | Providing and fixing of brass bib cock of approved quality : 20mm nominal bore |
| 16 | Supply and installation 1.00 H.P contrifugal pump (tullu pump) inc.etc all complete. |
| 17 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle Iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces |
| 18 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usinf structural steel etc as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar work etc all complete. |
| 19 | Applying priming coat over new steel and other metal surface upto 10cm in width or girth or small not exceeding 0.10 Sq.M. area after and including preparing the surface by thouroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushd, fine stell/wood, scrapper and papering and knotting including cost of all materials, labour T&P etc all complete.Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, superlac, Dulux specified brushing to give an even shade and including the cleaning the surface of all dirt and other foreign matter and scoured with wire brushd, fine stell/wood, scrapper and papering including cost of all materials, labour T&P etc all complete. |
| 20 | Providing and fixing in position precast R.C.C. Mahole cover and frame of required shape and approved quality Circular shape 500mm internal diameter |
| 21 | Complete wiring as per requirement |
| 22 | Wiring point for light with 1.5 sq mm. FRLSH PVC insulated multistrand single core copper conducter cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respects as dircted |
| 23 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conducter cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respects. |
| 24 | Supply and fitting of ceiling fan Usha, Khetan, Bajaj I.S.I mark including all complete. |
| 25 | S/F of 13watt L.E.D lighting of approved quality etc all complete. (M.R.) |
| 26 | Disposal of morrum/building rubbish/malwa/similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10.00km distance with all charge complete. |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorbtion less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigements etc. complete. Size of tile 600x600mm |
| 28 | Tile work in skirting, risers of steps and dado upto 2m height over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry @3.3kg/sqm including pointing in white cement mixed with pigment of matcvhiing shade compete. Marble tiles (polished) Raj nagar 8mm thick |
| 29 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
