|
| 1 | Point wiring for three High-Bay light controlled by one-way 16 Amps switch using 1.5 sq mm FRLSH copper conductor, multi-stranded, PVC insulated and unsheathed, drawn through PVC conduit of minimum 20 mm diameter, medium grade, ISI marked, including all conduit accessories such as bends, tees, junction boxes, elbows, etc., in concealed conduit or on surface/in channel fixed with GI saddle clamps duly screwed, as required. The item includes providing modular sunken boxes with PVC back plates for mounting modular type switches, sockets and regulators, complete with modular front plates, MS screws and cup washers. Providing continuous earthing with 1.5 sq mm FRLSH copper conductor of 1100 volts grade, It includes cutting of chases and making good the same with cement mortar and finishing of disturbed surfaces with plaster of Paris/putty/distemper/colour wash to match the existing surface, complete all as specified and as directed by the Engineer-in-ChargeNOTE: Continuous earth wire should be provided at each point with 1.5 sqmm FRLSH copper conductor cable of 1100 V grade up to ceiling rose/light fitting. |
| 2 | Point wiring for one light pointcontrolled by one-way 05 Amps switch using 1.5 sq mm FRLSH copper conductor, multi-stranded, PVC insulated and unsheathed, drawn through PVC conduit of minimum 20 mm diameter, medium grade, ISI marked, including all conduit accessories such as bends, tees, junction boxes, elbows, etc., in concealed conduit or on surface/in channel fixed with GI saddle clamps duly screwed, as required. The item includes providing modular sunken boxes with PVC back plates for mounting modular type switches, sockets and regulators, complete with modular front plates, MS screws and cup washers. Providing continuous earthing with 1.5 sq mm FRLSH copper conductor of 1100 volts grade, It includes cutting of chases and making good the same with cement mortar and finishing of disturbed surfaces with plaster of Paris/putty/distemper/colour wash to match the existing surface, complete all as specified and as directed by the Engineer-in-ChargeNOTE: Continuous earth wire should be provided at each point with 1.5 sqmm FRLSH copper conductor cable of 1100 V grade up to ceiling rose/light fitting. |
| 3 | All as per srl item No 2 but for 3 pin 6 Amps socket outlet independent boardincluding PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly. |
| 4 | All as per srl item No 2 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly. |
| 5 | All as per Srl item No 2 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5sq mm earth wire standard and connected to earth dolly. |
| 6 | S&F for modular switch6 Amps single pole one way230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. |
| 7 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. (Note: One 16 Amps Switch for 3 High- Bay Light) |
| 8 | S&F for modular socket6 Amps 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and directed by Engr In charge. |
| 9 | S&F for modular socket 16 Amps 230 V, 50 Hz, AC , flush typewith outer/inner covercomplete all as specified and directed by Engr In charge. |
| 10 | M &L Ceiling rose, surface bakelite 65x 50mm two to two terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. |
| 11 | S&F Sheet metal enclosure double door type for DBs8 way 240 volts with suitable busbar and neutral link including chasis wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 12 | S&F Sheet metal enclosure double door type for DBs4 way 240 volts with suitable busbar and neutral link including chasis wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 13 | S & F in replacement MCBsingle pole 240 volt any rating from 06 to 32 amps \"C\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable. |
| 14 | S & F in replacement MCBsingle poleand neutral 240 volt upto 32 Amps \"C\"series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable. |
| 15 | Supply and fixing of sub-main wiring with two runs of single-core PVC insulated copper conductor cables, multi-stranded, of size 4 sq mm, 1100 volts grade, drawn through PVC conduit of 50 mm diameter, medium grade, ISI marked, laid in concealed conduit or on surface/on channel fixed with suitable clamps, as required. The item includes providing one run of PVC insulated copper conductor cable of size 4 sq mm as continuous earth lead. It also includes supply and fixing of all necessary conduit accessories such as bends, tees, junction boxes, couplers, saddles /clamps, etc., cutting of chases wherever required and making good the same with cement mortar, complete all as specified and as directed by the Engineer-in-Charge. NOTE: [2 x 4sqmm (P+N) + 1 x 4Sqmm(E)]=1 Rm |
| 16 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC framewith 40mm thick RCC cover reinforced with 8mm dia MS bars, 20mm bore light grade GI watering pipe with funnel, charcoal & Salt and 1 Bags of Benzonite powder weighs 25Kg. including excavation and earth work in any type of soil complete all as shown in electrical plate No 3connected to main control board all as specified and testingon completion.NOTE: On completion of earthing contractor should check earthing results and submit the test report to engr-in-charge. The test result should be less than 1 ohm,if desired results are not obtained then earthing shall be redone by the contractor at his own cost. |
| 17 | S&F electronic step type fan regulator(Modular) upto 100 watt 230 volts 50Hz two modulecomplete all as specified and directed. |
| 18 | S & FLED lights fitting 1x 20W, 230V,white/ warm Endura Linear Neo surface and wall mounted LED Batten with powdered coated Aluminium Housing & Integrated electronic driver with THD<10%, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.The LED light should be mount on wall by using L bracket with metal screw for keeping alignment level.Make:Philips cat part no BN 021 LED 20S 6500 PSU GR (4 Ft)or Eqvt in Bajaj/Havells/Crompton |
| 19 | Supply and fixing of 70 W LED High-Bay luminaire with white/warm white light, having die-cast aluminium housing with high sturdiness and excellent corrosion resistance, suitable for mounting on channel. The luminaire shall be complete with in-built electronic driver having low THD, open-circuit protection and surge voltage protection.The LED High-Bay light shall have minimum luminous efficacy of 125 lumens per watt with beam angle of 120 degrees. The luminaire shall be provided with polycarbonate lens and 5 mm thick toughened tempered glass, resistant to thermal shock and impact with minimum IK-07 protection. The fitting shall be suitable for operation at ambient temperature ranging from –10°C to +55°C and operating voltage range of 140 V to 270 V AC. The luminaire shall be free from harmful UV and IR radiation,The High-Bay light should be fixed by using beam clamps/ eye bolt on truss with 6mm dia chain upto 1mtr length. complete all as specified and as directed by the Engineer-in-Charge. Make -LHEMACP7ICW070 of Havells, BY515PLED100S 5700PSU GR Philips oreqvlt as approved by GE. |
| 20 | S & F LEDbuilding securitylight fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. The building security light should be fixed with weatherproof junction box, mounting bracket & screw. Make:Philips cat part no BNPO46 LED 30 CW MR S1 PSU GR or Eqvt in Bajaj/Havells/Crompton or eqvlt as approved by GE. |
| 21 | Supply , Laying, Testing and commissioning cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size10 Sqmmx 2 coresize all as specified. |
| 22 | S&F Double Walled corrugatedDWC Pipe of size 32/ 40 mm including snap fit coupler Pt-II for protection of LT Cable in undergroundall as specified. |
| 23 | Excavation in trenchesand exceeding 1.5m wide and not exc 1.5m in depth inany type of soiland getting out all as specified. |
| 24 | Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick all as specified. |
| 25 | Removing excavatedmaterial (soil)to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the startingpoint complete all as specified. |
| 26 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and includingprovisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles all as specified. |
