|
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of mangalore pattern of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down existing surface complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc including taking down existing surface complete all as specified and directed. |
| 3 | S&F MS steel work in (MS round/square/rectangular pipe,angle) posts,truss ,purlin and water tank stagging including special shaped washersetc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 withone shop coat of zinc chromate primer paint including dismantling of existing surface complete all as specified and directed. |
| 4 | S&F Fe 410-W (Gde-E-250) qualitymild steel plate plain or chequered,5 mm thick or over in thickness including dismantling of existing surface complete all as specified and directed. |
| 5 | S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm including dismantling of existing surface complete all as specified and directed. |
| 6 | Erection Fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 7 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.18sqmbut not exceeding 0.36 sqm, as in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of existing surface complete all as specified and directed. |
| 8 | M&L for 15mm thick screed bedor bedding layer in cement mortar (1:6) for laying floor/roof finishes etc. including dismantling of existing surface complete all as specified and directed. |
| 9 | M&L coloured glazedceramic tiles200x 300x7 mm thick, in vertical surfaces, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement including dismantling of existing surface complete all as specified and directed. |
| 10 | M&L for rendering 10mm thick on brick or concrete or stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes including taking down existing surface complete all as specified and directed. |
| 11 | S&F anodised GI snap grid (Size of grid 605mm x 605mm ) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing including taking down existing surface complete all as specified and directed. |
| 12 | S&F 4 mm thick Non asbestos fibre cement building board decorative type( e-board)fixed in aluminium snap grid frame work with screws including taking down existing surface complete all as specified and directed. |
| 13 | M&L for brick work with old size sub class \"B\" bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including dismantling of existing surface complete all as specified and directed. |
| 14 | M&L for brick work with old size sub class \"B\" bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantling of existing surface complete all as specified and directed. |
| 15 | M&L rendering 5 mm thick in cement plaster in cement mortar (1:4) mixed with integral water proofing compound @3%by wt of cement over 10 mm thick backing coat in cm (1:4) on unfair faces of brick work or concrete surface complete all as specified and directed.Note : water proofing compound shall be measured and paid separately). |
| 16 | Supplied only integral waterproofing liquid complete all as specified and directed. |
| 17 | Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on fair faces of brickworks including taking down existing surface complete all as specified and directed. |
| 18 | M&L for 25 mm thick cement concrete (1:2:4) type B1 ( 20mm graded stone aggregate) as in floor finished rough to receive floor finishes including dismantling of existing surface complete all as specified and directed. |
| 19 | M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection/paving finish even and smooth without using extra cement including dismantling of existing surface complete all as specified and directed. |
| 20 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade \"B\" complete all as specified and as directed. |
| 21 | M&L for cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation etc. complete all as specified and directed. |
| 22 | M&L for Reinforced cement concrete (nominal mix)Type B1 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, posts and struts including dismantling of existing surface complete all as specified and directed. |
| 23 | M&L for Reinforced cement concrete Type B1 1:2:4(20 mm graded aggregate ,nominal mix) in Foundations, including rafts footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete including dismantling of existing surface complete all as specified and directed. |
| 24 | M&L for Reinforced cement concrete Type B1 1:2:4(20 mm graded aggregate ,nominal mix) in Beams, cantilevers, bressummers, lintels over 1.5m span including dismantling of existing surface complete all as specified and directed. |
| 25 | M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions in Square, rectangularor polygonal complete all as specified and directed. |
| 26 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. in flat surface complete all as specified and directed. |
| 27 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams in flat surface; and similar work; vertical or to batter complete all as specified and directed. |
| 28 | M&L for TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns,hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 29 | M&L for Mild steel TMT bars 6 to 8 mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 30 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqmn.exe 4 sqm each complete all as specified and directed. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 32 | S&F factory made steel windows with side hung shutter incl projecting type hinges with steel handles, and steel complete with glazing bars, dovetailed or welded complete all as directed. |
| 33 | ditto as item no 32 above but without glazing bars complete all as specified and directed. |
| 34 | S&F Steel ventilators with side hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed. |
| 35 | S&F Factory made single extruded WPC(Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 36 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 37 | S&F Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 38 | S&F150mm size aluminium anodised handles, cast type complete all as specified and directed. |
| 39 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 40 | S&F aluminium alloy sliding door bolt 300mm long, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 41 | S&F Sheet glass 4.0 mm thick, ordinary quality & glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and as directed |
| 42 | S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.00mm with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 43 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed. |
| 44 | S&F for steel tubing 15mm Bore \"medium grade\" galvanised, with all fitting and fixed complete incl cutting chasing pinning and making goodto walls and ceilings or laid in floors complete all as specified and directed. |
| 45 | S&F for steel tubing 20mm Bore \"medium grade\" galvanised, with all fitting and fixed complete incl cutting chasing pinning and making goodto walls and ceilings or laid in floors complete all as specified and directed. |
| 46 | S&F for steel tubing 25mm Bore \"medium grade\" galvanised, with all fitting and fixed complete incl cutting chasing pinning and making goodto walls and ceilings or laid in floors complete all as specified and directed. |
| 47 | Refixing old steel tubing 15 bore and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified. |
| 48 | Refixing old steel tubing 20 bore and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified. |
| 49 | S&F Stop valve 20mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 20mm-112gms) complete all as specified and directed. |
| 50 | S&F Chromium plated shower roses 125mm size of Std quality and approved make with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 51 | S&F in repair CP tubulartowel rail 600 mm long complete all as specified and directed. |
| 52 | S&F in repairs Soap dish complete all as specified and directed. |
| 53 | S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 54 | S&F Vitreous China wash basin, white, flat back, size 630x450mm (flat back or angle back type) including brackets, cutting for and pinning \"in brackets waste coupling, waste pipe, grating complete all as specified and directed. |
| 55 | S&F in repairWater Closet (squatt pattern) of vitruous china squatting pan of pattern \"ORRISA\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed. |
| 56 | S&F wash down water closet (pedestal pan) including connection to drain pipes and to flushing pipes anti-syphonage pipe etc excluding flushing cistern incl flush pipe, jet and seat cover complete as as specified and directed |
| 57 | S&F 10 litres PVC Syphonic action type, Flushing cistern, high level, with inlet, ball valve, float chain and pull incl flush pipe and brackets complete as as specified and directed |
| 58 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 59 | S&F Waste coupling 32mm bore of PTMT (half or full threaded) min. weight 32mm-45gms) complete as as specified and directed |
| 60 | S&F Vitreous China Urinal, Half stall type, white (back or corner wall type) complete incl providing and fixing plugs beding urinal against wall in cm 1:2 security urinal plug with and incl 60mm long brass screws pointing around urinal back in cement fixing automatically flushing cistern with bracket, flush pipes grating and union for discharge pipe complete as as specified and directed |
| 61 | S&F cast copper alloy urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed |
| 62 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete as as specified and directed |
| 63 | S&F 15mm borebib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwedfor iron pipe or for brass ferrule complete as as specified and directed |
| 64 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 65 | S&F 15mm borestop valves/angle cock, cast copper alloy, with crutch or butterfly handle, screwed down, screwedfor iron pipe or for brass ferrule complete as as specified and directed |
| 66 | S&F PVC connections 15mm size with PTMT nuts of length 300/450mm complete as as specified and directed |
| 67 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement including grating complete all as specified and as directed. |
| 68 | S&F PVC (SWR) gully trap 125/110 mm incl grating setting and jointing with solvent cement complete as as specified and directed |
| 69 | M&L for PCC 1:3:6 type C1 as in concrete bed to drain pipe incl packing under haunching against the sides of pipes after are laid and tested for 110mm dia pipe complete as as specified and directed |
| 70 | S&F 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete as as specified and directed |
| 71 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete as as specified and directed |
| 72 | S&F PVC (SWR) bends of radius 75mm bore complete as as specified and directed |
| 73 | S&F PVC (SWR) junction single,(Single T) equal or unequal of radius 75mm bore complete as as specified and directed |
| 74 | S&F PVC (SWR) vent cowl 75mm bore complete as as specified and directed |
| 75 | S&F 110mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete as as specified and directed |
| 76 | S&F 110MM PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete as as specified and directed |
| 77 | S&F PVC (SWR) bends of radius 110mm bore complete as as specified and directed |
| 78 | S&F PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore complete as as specified and directed |
| 79 | S&F PVC (SWR) vent cowl 110mm bore complete as as specified and directed |
| 80 | S&F 1000 litre capacity ,rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) in position all specified in SSR Part –I complete all as specified and as directed. |
| 81 | M&L Ball valves (20 mm) high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed. |
| 82 | S&F in repair Aluminium anodised Brackets complete all as specified and directed. |
| 83 | S&F Harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed. |
| 84 | M&L preparation of new surface & applying two coat of synthetic enamel paint to wooden surfaces exc 10 cm girth complete all as specified and directed. |
| 85 | M&L for applying two coat of cement based paint painton new surface including preparation of surface incl Priming plastered and other surfaces with alkali resistant priming paint complete as as specified and directed |
| 86 | M&L for Preparation of new plastered surfaces and applying two coats of OBD over a coat of alkali resistant primer complete all as specified and directed. |
| 87 | Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 88 | M&L in replacement of point wiring with 1.5 sqmmFRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade (MMS ISI) of size not less than 20 mm dia(or as site requirement) concealed in wall/over ceiling, metal flush boxes of required size and with modular plates incl of all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dollyfor light / fan point controlled by one switch.Note:- (i) Cost of PVC conduit, modular plates,frames, cover plates etc; are deemed to be included in the quoted rate.(ii) M&L for cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. |
| 89 | All as per item 1.0 above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 90 | All as per item 1.0 above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 91 | All as per item 1.0 above but for 3 pin 5 Amps switch socket on same board with 1.5 sq mm copper cable complete all as specified and directed. |
| 92 | S&F in replacement of modular switch in replacement,10A,1 module single pole, one waycomplete all as specified and directed. |
| 93 | S&F in replacement of modular socket outlet in replacement ,5 pin ,10 Amps,2 module, 240 Volts complete all as specified and directed. |
| 94 | S&F in replacement of modular switch in replacement 16A,1 module single pole, one waycomplete all as specified and directed. |
| 95 | S&F in replacement of modular socket outlet in replacement ,5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 96 | S&F in replacement ofceiling rose polycarbonate typethree terminals complete all as specified and directed. |
| 97 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 98 | S&F in replacement ofmirror light batten type 10W 230V AC, 50Hz, Pf >0.98, THD <10% on wall complete all as specified and directed by Engineer in charge. |
| 99 | Supply and fixing in replacement LED light fitting 1x9W/1x10W bulkhead luminaires including LED light drive holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 100 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including cutting into wall/wooden surface etc all complete as specified and directed. |
| 101 | Supply and fixing in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Five star rated with brushless direct current motor complete and old fan deposit to E/M yardcomplete all as specified and directed by Engr-in Charge |
| 102 | Supply and fix electric in replacement of water heater storage type ABS body(as directed by Engineer-In-charge) with glasslined stainless steel inner tank capacity 25 litres, heating element of 2 KW, BEE 5 star rated with all accessories such as safety valve , thermostat , NRV , SS 304 connection pipe , nut bolt with metalic anchor fasterner etc for fixing on wall& testing, complete all as specified and directed. Note: Warranty of 2 year on geyser and 07 year on geyser tank shall be submitted by the contractor. |
| 103 | S&F in replacement single pole and neutral enclouser with atwo pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed . |
| 104 | S&F in replacement sheet metal enclosure double doorfor MCB DBs SPN 8 way 240 V, complete flush mounted all as specified and as directed. |
| 105 | S&F in replacement MCB single pole (SP) 5 to 40 Amps,240 volts , C curve , AC , 50 Hz ,10 kA complete all as specified and directed. |
| 106 | S&F in replacement MCB Single pole & neutral (SPN)63 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 107 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . |
| 108 | Supply and draw submain in replacement of wiring in replacement of old wiring with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in PVC conduit of suitable sizeincluding 4 sq mm multi-strand FRLSHPVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete incl taking out old unserviceable submain wiring of any type.Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 109 | M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 core complete all as specified and directed. |
