|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 2 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets. |
| 3 | Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work. |
| 4 | -Ditto- all as per item 4 abovebut in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section. |
| 5 | M & L for second class hardwood clean sawnscantlings as in timber framed and fixed complete all as specified and directed. |
| 6 | Ditto all as per item 5 above but except timber |
| 7 | M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 & n.exc 6 sq.cm complete all as specified and directed. |
| 8 | M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 & n.exc 25 sq.cm complete all as specified and directed. |
| 9 | M & L for 6mm thick (No of ply 5) plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and directed. |
| 10 | M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 12 | M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15mm thick screed bed in cement mortar 1:6 etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile completed all as specified and directed by E-in-Charge. |
| 13 | M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in cement mortar 1:4. |
| 14 | M &L 75mm thick cement concrete type D2 1:4:8 in sub base floor complete all as specified and directed. |
| 15 | M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement. |
| 16 | Dismanling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 17 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed |
| 18 | S & F steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to I.S.1161- 1979 Fe 410-W (GdeE- 250) complete all as specified and as directed by Engineer-In-charge |
| 19 | S & Frolled mild steel in Joist, channel, angle, or tee sections, fixed independently,without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated)conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified. |
| 20 | S&F Pre-painting galvalume aluminum zinc coating GI based corrugatedsteel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed |
| 21 | S&F Pre-painting galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed |
| 22 | Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfacesexc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge. |
| 23 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. |
| 24 | M&L for Precast cement concrete block masonry 1:3:6 type C1 with solid block exc 10cmin width and setting in cement morter 1:6 complete all as specified and ditected by Engr-in-Charge. |
| 25 | M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over 20mm thick screed bed in cement mortar 1:4 as in floors with grey cement and pigment complete all as specified and directed. |
| 26 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc. |
| 27 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed. |
| 28 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge. |
| 29 | M&L complete removal of existing treatment and applying 3mm thick Birla wall care putty and applying two coat of Oil Bond distermper white or tinned over an coat of primer on walls, etc all as specified and directed. |
| 30 | M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 31 | M&L for preparation of surfaces of old plaster surface of wall and applying two coat of cement base paint complete all as specified and directed. |
| 32 | M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in chajjas complete all as specified and directed |
| 33 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) |
| 34 | Taking down Chowkats or frames 1.5 Sq. M each but n. exc 4.00 Sqm (Without taking off shutters from the frames) |
| 35 | S & F II class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints. complete all as specified and directed by Engr In Charge. |
| 36 | S & F of 35 mm thick (Batten thickness) 2nd class hardwoodplain, framed panelled shutters(any numbers of panels) with panels of timber flat on both sides (feather edged) or od veneered particle board of medium density , wood particle board with commercial face veneers and fitted to chaukhats complete all as specified and directed. |
| 37 | S & F of 35 mm thick (Batten thickness) 2nd class hardwoodglazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed. |
| 38 | S & F of 30 mm thick (Batten thickness) 2nd class hardwoodglazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed. |
| 39 | S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165. |
| 40 | M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks. |
| 41 | S & F 125mm butt hinges, medium weight, cold rolled mild steel and fixed. |
| 42 | -Ditto- all as per item 42 above but 75mm long. |
| 43 | S & F 300mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 44 | S & F 150mm Aluminium handles, cast type, anodised |
| 45 | S & F 125mm Aluminium handles, cast type, anodised |
| 46 | S & F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 47 | S & F 125mm aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 48 | S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete. |
| 49 | M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane. |
| 50 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed. |
| 51 | M & L for preparation of wood and wood based materials, new or old surfaces any description not otherwise described and exc 10cm width or girth and applying two coats of creosote oil all as specified and directed. |
| 52 | M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 53 | S & F in repair Harison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete. |
| 54 | Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store all as specified and directed. |
| 55 | S & F in PUF insulated cylindrical tank of capacity 1000 ltrs vertical type double layer duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree cenfigrade and hoisted on platform complete with making pipe line connection complete all as as specified and directed. |
| 56 | S&F 20mm bore ballvalve high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball secrewed for iron pipe and fixed .( Minimum wt 15 mm - 142 gms/20 mm - 210 gms) |
| 57 | S&F15 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge. |
| 58 | S&F20 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge. |
| 59 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed. |
| 60 | S&F 15mm bore Galvanised steel tubes,\"medium grade\"with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.. |
| 61 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed. |
| 62 | S&F 20mm bore Galvanised steel tubes,\"medium grade\"with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.. |
| 63 | S & F in repairs bib taps 15mm diafancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 64 | S & F in repairs 15mm dia stop valves fancy type chromium plated, screwed down,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 65 | S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed. |
| 66 | Supply and fixed (in repair) PVC connections 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified. |
| 67 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed. |
| 68 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 69 | S & F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 70 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall all as specified and directed. |
| 71 | S & F in repairs 20 mm dia brass chromium platedtubular towel rail, D type, 60cm long between flanges complete all as specified and directed. |
| 72 | S & F cast iron floor trap 75mm out let dia with grating including jointing to waste pipefixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 73 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 74 | Supply andfixing in repair, brass chromium plated, toilet paper holder fixed with chromium platedbrass screws, complete all as specified and directed by Engineer-in-Charge. |
| 75 | S & F in repairs15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 76 | S&F in repairs 32 mm dia PVC waste pipe for WHB complete all as specified |
| 77 | S&F in repairs 40 mm dia PVC waste pipe for Sink complete all as specified |
| 78 | S&F in repair Health faucet (ABS Body) mild steel CP 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl fixed in position complete all as specified. |
| 79 | S&F in repair C.P grating 100mm square/round with or without hole complete all as specified. |
| 80 | S&F in repair, ball brass valve high pressure with polythene float and flynut, screwed for iron pipe size 20mm bore, complete all as specified. |
| 81 | Supply, laying, jointing and testing for 150mm bore class \"A\" salt glazed stone ware drain pipe (ISI marked) of approved make laid in trenches jointed in CM 1:1, complete all as specified. |
| 82 | Granite (of any type) 18 to 20mm thick work (table rubbed and polished) is steps, jambs, pillers, window-cills, cooking platforms and like in CM 1:4 incl in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 83 | S & F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or labioratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915x460mm with bowl size 410mm x 330mm x160mm all as all as specified and directed. |
| 84 | M&L for pre-cast type B-1 (1:2:4) 20mm graded stone aggregate ) as in cover slabs for man-holes etc set in cm (1:6) complete all as specified and directed. |
| 85 | S&F urinal spreader of PTMT 15mm size with PTMT nuts of length 300mm completeall as specified and directed by Engr-in-Charge |
| 86 | S & F 110mm dia PVC (SWR) pipe single socketed, in any length in retaining wall as spout pipe all as specified and directed. |
| 87 | S & F in repair hydraulically regulated door closer, (die cast) body designation No 3, universal type suitable for door shutters of 851 to 1000mm in width and weight b/w 61 to 80kg complete. |
| 88 | M &L 75mm thick cement concrete type C2 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth wuthout using extra cement a in plinth protection all as specified and directed. |
| 89 | S&F in 20 mm dia ,Al alloy curtain rails with brackets fixed in repair. |
| 90 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed by Engr-in-Charge |
| 91 | Taking down unserviceable submain wiring and service cablealongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface all as directed at site. |
| 92 | Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed by Engineer-in-Charge |
| 93 | Matrial & Labourfor point wiring using approved colour coding as per IS with using approved coper coding as per IS 1.5 Sqmm multistranded , 1100 volt grade copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulatedstranded copper conductor cable for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceilingincluding provision PCV Box on top for fixing switches sockets etc. all as specified for one light point / fan / Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 94 | All as per Srl item No 94 here-in-before but controlled with one 3 pin socket outlet 5 Amp onthe same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 95 | All as per Srl item No 94 here-in-before but controlled with one 3 pin socket outlet 5 Amp on theindependent board withcable 1.5sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge. |
| 96 | All as per Srl item No 94 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board withcable 2.5sqmm including provision of 2.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge. |
| 97 | Supply and fixing ofswitch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 98 | Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one230 Volt flush typecomplete all as specified and directed by Engineer -in-Charge. |
| 99 | Supply and fixing ofswitch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 100 | Supply and fixing ofSocket outlet 2 in 1, 3 pin, 5 and 15amp flush type single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 101 | M&L Ceiling rose, 3 terminal with ISI markall as specified and directed by Engr-In-Charge. |
| 102 | Supply and fix LED Batten 20W 4 ft (Approx) length ultra slim square profile with extruded polycabonate, enviromenental friendly, energy efficient , connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed.Make- Havells / Philips / Crompton |
| 103 | Supply andfixing surface & wall mounted LED 10 W tube light fitting batten, mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories all as specified and directed by Engg-in-Charge. Make: Havells / Philips / Crompton |
| 104 | Material and labour forlamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings. Make : Anchor/leader/havells |
| 105 | Supply andfixingLED lamp 9W energy saving upto 80%, BEE ratedwith all accessories all as specified and directed by Engg-in-Charge. Make:Cromptom part No-LED 9DFCDL-PRO-BO/ LED 9W-B22/E27-CDL/WW or equivalent in Philips/wipro/Havells |
| 106 | Supply & Fixing LED light fitting 1 x 9 W/1x 10 Wbulkhead luminaries including LED light driver holder connecting upwiththree core flexible copper conductor cable of suitable size. Make havells/Bajaj |
| 107 | Supply and fixing ofsheet metal enclosure double door for DBs single pole and neutral for 08 way 240 volt complete all as specified and directed by Engineer-in-Charge |
| 108 | Supply and fixing ofsheet metal enclosure double door for DBs single pole and neutral for 12way 240 volt complete all as specified and directed by Engineer-in-Charge |
| 109 | S&F in replacement exhaust fan,Steel body AC Single Phase, 230V of size300 mm sweep, withblade and frame and louvres. complete all as per specified and directed by Engineer-in-Charge. |
| 110 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 6 to 32 Amp |
| 111 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (ii) SPN40 to 63 AMP |
| 112 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 16 sqmm two core aluminium solid conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed by Engineer-in-Charge . |
| 113 | Supply and fixing House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. Grade), with two nos of suitable size of clamp,nuts, bolts and wahers etc fixed to GI sheet roof complete all as specified and directed. |
| 114 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel all as shown in electrical plate no 3connected to earthing testing pointall as specified or indicated including testing on completions. |
| 115 | Supply and fixing9 watts LED backup lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode all as specified and directed by Engg-in-Charge. Make: Havells |
| 116 | Supply & Fixing LED Bldg security light fitting 30 Watt with best in class design & robust heat sink along with class leading IP 65,IK & surge protection for long lasting performance connected withcopper conductor cable of suitable size. Make Havells/Bajaj/Crompton.Note:- Sutable size bore of Security light suitable for GI Bracket measured and paid seperately in respective item. |
| 117 | Material and Labour street light bracket made out from GI Pipe 32 / 40 mm borelight grade 1.20 meter long bent to required shape and fixing to poles etc including fixing of clamps, nuts, bolts etc as specified and directed by Engr-in-Charge. |
| 118 | S&F TPN 63 Amp,10 KA complete all as specified and directed by Engineer-in-Charge |
| 119 | Supply and fixing ofsheet metal enclosure double door for DBs Triple pole and neutral for 4 way 415 volt complete all as specified and directed by Engineer-in-Charge |
| 120 | M&L for submain wiring withPVC insulated unsheathed copper conductor multi stranded, single core 1100V grade 2x6.0 sqmm FRLScompletedrawn in and includindg medium grade rigid non-metallic PVCconduitand its accessories along with 1x 6.0 sqmm PVC insulated unsheathed copper conductor multi sranded single core copper FRLS cable for continuous earth wire andduly connected to common earth dollyall as specified and directed. |
| 121 | Schedule of Credit |
