|
| 1 | Demolishing Brick work manualy by mechanical means including stacking of Steel bars and disposal of unseviceable matarial with 50 metres lead as per direction of Engineer-in charge in Lime Mortar. DSR N0-15.7.3, |
| 2 | Demolishing Brick work manualy by mechanical means including stacking of Steel bars and disposal of unseviceable matarial with 50 metres lead as per direction of Engineer-in charge. In Mud Mortar. DSR N0-15.7.1, |
| 3 | Demolishing Brick work manualy by mechanical means including stacking of Steel bars and disposal of unseviceable matarial with 50 metres lead as per direction of Engineer-in charge in Cement Mortar . DSR N0-15.7.4, |
| 4 | Dismantling Doors, windows and clerestory window (Steel or Wood) shutter including chaukhat, architrave, holdfast etc. complete and stacking within 50 meters lead of area 3 sqm and below. DSR.No-15.12.1, |
| 5 | Earth work in Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan lncluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil)( DSR.No-2.1.1, |
| 6 | Providing and laying in Position Cement Concrete of 1:5:10 (1 cement, 5 Coarse sand (Zone-lll) Derived from natural Sources : 10 graded Stone aggregate 40 mm nomical size Derived from natural Sources ) DSR N0-4.1.10, |
| 7 | Centering and shuttring including strutting, Propping etc. and removal of from for suspended floors, roofs, landings, balconies and access platform. DSR-5.9.3, |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR-5.3, |
| 9 | Steel reinforcement for R.C.C. work including Straightening, Cutting, Bending, Placing in position and binding all Complete upto Plinth Level. Themo-Mechanicaily Trated Bars of grade Fe-500D or more. DSR-5.22C.1, |
| 10 | 20 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DSR-13.6.1, |
| 11 | Providing and Applying water proofing Treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consising of applying. (A) After surface preparation, frist layer of slurry of cement @ 0.488 kg/Sqm mixed with water propfing cement compound @ 0.253 kg/Sqm, (B) laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints og fibre cloth should not be less than 10 cm., (C) third layer of 1.5 mm thickness consisiting of slurry of cement @ 1.289kg/Sqm mixed with water proofing cement compound @ 0.670 kg/Sqm and coarse sand @ 1.289kg/Sqm this will be allowed to air cure for 4 hours followed by water curing for 48 hours. the entire treatment will be taken upto 30 cm on parapet wall and trucked info groove in parapet all around , (D) fourth and final layer of brick tiling with cement mortar (Which will be paid for separately. For the purpose of measurment the entire trated surface will be measured. DAR-22.6, |
| 12 | Brick work with Common burnt clay F.P.S.(Non Modular ) bricks of Class- designation 7.5 in foundation and plinth in 1:4 Cement and Coarse sand of Mortar in including Supply of all materials labour T& etc required for proper completion of work as per DSR.No-6.1.1, |
| 13 | Provoding and Laying Damp Proof Course 40 mm thick with Cement concrete 1:2:4, ( 1 Cement, 2 Coarse Sand (Zone-lll) Derived from natural Sources : 4 graded Stone aggregate 12.5 mm nomical size Derived from natural Sources ) DSR N0-4.10, |
| 14 | Brick work with Common burnt clay F.P.S. (Non Modular ) bricks of Class designation 7.5 in Superstructure above plinth level up to floor V level in all shapes and size in Cement Mortar 1:4 Cement and Coarse sand in including Supply of all materials labour T& etc required for proper completion of work as per DSR.No-6.4.1, |
| 15 | 15 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DSR-13.5.1, |
| 16 | Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. DSR.N0-15.23.1 |
| 17 | Providing and laying Vitrified floor Size of Tile 600x1200 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DSR-11.41A.2.2) |
| 18 | Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DSR-11.40) |
| 19 | Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DSR-8.31), |
| 20 | Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, ln colour White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DSR-11.39) (Endura Tiles) |
| 21 | Providing and Fixing of Wall to Wall Wooden Almirah with 19mm thick Century Ply Board ISI marked lncluding Laminated Both Side 1 mm thick Sunmica Supirior quality Fixing with Glue and Nails etc S.S.Handle, S.S.Hinges Magnet. Lock etc. Complete work as Per Direction of Engineer in Charge. |
| 22 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter DSR No- 12.41.2, |
| 23 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm Coupler DSR No-12.42.1.2, |
| 24 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 87.5° Bend 110 mm Bend DSR No-12.42.5.2, |
| 25 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter DSR No- 12.41.1, |
| 26 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm Coupler DSR No-12.42.1.1, |
| 27 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 87.5° Bend 75 mm Bend DSR No-12.42.5.1, |
| 28 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe )18.8.2, |
| 29 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal outer dia pipe )18.8.3, |
| 30 | Supply and Fixing of S.S. Jali 125 mm dia, |
| 31 | Supply and Fixing of PVC Nahani Trep, |
| 32 | Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaguar Make. Code N0-FLR-5053N, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 33 | Providing and Fixing of 15mm dia Florentine C.P. brass Bib Cock, (Straight line model) with wall Flange Jaguar Make Code N0-FLR-5047N, including supply of all material, labour, T&P etc. complete. |
| 34 | Supply and Fixing of 15mm dia Florentine C.P. brass Two way bib cock with Wall Flange Jaguar Make Code N0-FLR-5041N, including supply of all material, labour, T&P etc. complete. |
| 35 | Supply and Fixing of Florentine C.P. Brass Single Lever Basin Mixer without Pop-Up Waste System with 450 mm long braided hoses, Jaguar Make Code N0-FLR-5001B, including supply of all material, labour T&P etc. complete. |
| 36 | Supply and Fixing of Florentine C.P. Brass Wall Mixter 3-in-1, System with Provision for both hand shower and overhead shower Complete with 115 mm long Bend Pipe, Connecting Legs & Flange (without Hand & Overhead Shower), Jaguar Make Code N0-FLR-5281N, including supply of all material, labour T&P etc. complete. |
| 37 | Supply and fixing of CP hand Shower Ø95 mm round shape single flow (ABS body in chrome Plated with Grey Face Plate) with rubit cleaning sysyem of Jaquar make (Code No- HSH -1737) with Flaxible Tube 8 mm dia & 1.5m long with nuts Code no-SHA-549D8 including supply of all material & Labour and T&P etc complete. |
| 38 | S/F of Maze Over head Shower Ø300 mm Round Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System with Shower Arm Ø20 mm & 600 mm long Round Shape with 90° Bend for wall mounted showers with stainless Steel Flange Jaguar make, Code No-OHS-CHR-1633+SHA-479L600 lncluding supply of all material & labour and T & P etc. requird for proper completion of work. |
| 39 | S/F 15mm dia C.P. health faucet with 8mm dia 1.20 Metre meter long flexible tube & wall hook, Jaquar make Code N0-ALD-573, including supply of all material, labour, T&P etc. complete. |
| 40 | Providing and fixing of Single Piece WC with UF Soft Close Slim Seat Cover Hinges, Dual Flush Cistern Fittings And Fixing Accessories and Aceessories set Size-370x670x720 mm. S Trap 300 mm Code N0-LYS-WHT-38851S300UFSMNM, Jaquar make, including Cutting and making good the walls and floors wherever required: |
| 41 | Providing and fixing VIGNETTE Rimless Wall Hung WC With UF Soft Seat Cover, Hinges set, Accessories Set. Size-390x570x365 Code N0-VGS-WHT-81953UF Jaquar make, and Single Piece Slim Concealed Cistern with wall Mounting Frame, Instalation Kit & \"\"S-Type drain Pipe connection set for wall hung WC (without Flush Control Plate) Code-JCS-WHT-2400WP Jaquar makeFlush Plate Control Plate Alive, Code-JCP-CHR-152415, Jaquar make, including Cutting and making good the walls and floors wherever required. |
| 42 | Supply and fixing of Aria Wall Hung Basin With Pedestal, Size 570X470x190 mm ARS-WHT-39801+ARS-WHT-39301, Jaquar make with C.P. jali, PVC waste pipe, Bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work. |
| 43 | S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AQN-7731N, including supply of all material, labour, T&P etc. complete. |
| 44 | S/F of C.P. brass toilet Roll/Papar Holder with Flap Jaguar make Code N0-AKP-39753PS, including supply of all material, labour, T&P etc. complete. |
| 45 | S/F of C.P. Brass Single Towel Rack 600 mm with long hungers Jaguar make Code N0-AKP-35781PS, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 46 | S/F of C.P. brass towel ring Square Jaguar make Code N0-AKP-35721P, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 47 | S/F of C.P. trumbler holder Jaguar Make Code N0-AKP-35741P, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 48 | Supply and Fixing of Glass Shelf 600 mm long Jaquar make Code N0-AKP-35771P, including supply of all material, labour, T&P etc. Complete. |
| 49 | Supply and Fixing of Corner Glass Shelf (With Bracket) Jaguar make Code N0-ACN-1173, including supply of all material, labour, T&P etc. Complete. |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. |
| 51 | Providing and laying Vitrified floor Tile Size of 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DSR-11.41.2) |
| 52 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 Note:- Structural design proof checked from a Government Engineering Institute, to be provided shall be paid separately. by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Using R2 series with frame (70mm & above) x (40mm & above) & Glazed sash (25mm & above) x (50mm & above) with zinc alloy (zamak powder coated touch locks with hook (Height upto 1.2 metre). Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). As DSR -9.147.A4.1, |
| 53 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. DSR-1.1.18, Please Enable Macros to View BoQ information |
