|
| 1 | Excavation in foundation in ordinary soil including lift upto 1.50 M and lead upto 30M. Including watering ramming and dressing etc. and disposal of surplus earth as upto a distance of 30 M. from the foundation trenches.etc. required for proper completion of the work. SI.No.251. |
| 2 | Concrete with 4 cm gauge brick ballast Fine sand of 1.25 F.M and cement in proportion of 1:4:8 in foundation and under floor including supply of all materials labour T & P etc. required for proper completion of the work as Specification S.I.N0. 275 |
| 3 | C.C.work in 1:2:4 (1cement: 2coarse sand : and 4approved 20mm stone ballast) including supplyof all materials Labbour T&P etc. required for proper compl. Of work. S.I.No. 279(b) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding cost of centering, shuttering, finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) R.C.C.work in Footing D.S.R.5.1.2 |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) R.C.C.work in Column |
| 6 | Mild Steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. D.S.R.5.22.1 |
| 7 | Providing and spplying white proofing cement based putty of average thickness 1mm of approved brand and manufacture over the plasterd wall surface even and smooth surface as per D.S.R. 13.80 |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 9 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface) |
| 10 | Mild steel or iron work in haeavey size such as trusses build up Gate record raks .roof work gate etc. wroungth to required from I/C drilling holes riviting or welding to where necessery and proper copml. of the work. S.I.No. 503 |
| 11 | G.C. Sheet for roofing (22 gauge) |
| 12 | Wiring point for light with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in PVC conduite as per S.I. No.131C |
| 13 | Wiring point for Fan with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in PVC conduite as per S.I. No.133 c |
| 14 | Wiring point for plug with 1 sqmm FR PVC insulated multistrand single core copper conductor cable in PVC conduite as per S.I. No.134B. |
| 15 | Supply and fixing of power point plug with 15A/240V/flush type switch and 5 pin 15Amp./250V flush type univershal socket in suitable MS box of 175mmx100mmx50mm size with phenol thick laminated backlite sheet cover 3mm thick fixed with brass machine screw washer as per S.I.N0. 1139 |
| 16 | Supply and wiring of sub main with FR PVC insulated 1100 volt grade multistrand single core copper in 20mm dia. (2 mm thick PVC conduite one No. 2.5 sqmm insulated 1100 volt grade multi strand copper conductor cable as earth continuity wire drawn inside the conduit as per S. I. No. 216c. |
| 17 | Supply and fixing of surface/flush mounting 6 way SPN distribution board without MCB copmlete in all respect as per S.I. No. 1022 |
| 18 | Suppy and fixing of holder complete in all respect as per S.I. No. 405. |
| 19 | S/f of 4800mm size ceiling fan for Room (as per Market Rate) |
| 20 | S/f of c.f.l. 8-18watt Please Enable Macros to View BoQ information |
