Tender For Special Repair Of Building No P/528 P/529 And P/280 At Pxe Chandipur Under Ge (I) R And D Chandipur, Chandipur-Odisha

TDR : 54030871

Tender Notice
BOQ

26 Days Left

Chandipur , Odisha

Tender Brief : Tender For Special Repair Of Building No P/528 P/529 And P/280 At Pxe Chandipur Under Ge (I) R And D Chandipur

Document Fees
₹ 1000 /-

EMD
₹ 183000.0 /-

Tender Value
₹ 1.08 Crore /-

Submission Date
13-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.
2	M & L for 6 mm thick cement plaster in CM 1:3 on fair faces ceiling , Chajja, shelves and surface to be even and fair complete all as specified and directed.
3	M & L for 12 mm cement plaster in CM 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
4	M & Lfor rendering 15 mm thick cement plastermixed with WPC as per manufacturers instructions on external surfaces of brick work in CM 1:4and surface to be finished even & smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separately).
5	Supply only integral water proofing compound complete all as specified and directed.
6	M & L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, for new work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre of approved manufacturer and of required shade and colour complete all as specified and directed.
7	M&L for Preparation of newly plastered surfaces of ceiling and applying two coats of white washcomplete all as specified and directed.
8	M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 ltr/10 sqm) complete all as specified and directed.
9	Complete removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering from wall and ceiling and preparing the surface smooth including necessary repairs to scratches etc complete all as specified and directed.
10	M&L forapplying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the new/old plastered wall surface to prepare the surface even and smooth complete all as specified and directed.
11	M&L for two or more coats of White washing with lime on the old surface of Ceiling to give an even shade complete all as specified and directed.
12	M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade over old plastered surfaces (Two or more coats applied @ 1.43 ltr/ 10 sqm) including exterior wall putty complete all as specified and as directed.
13	M & L for taking down existing Water Proofing Treatment of any description including PCC padding etc. roughening surfaces of old concrete floors / slabs and washing down with water to remove dust particles complete including preparation of surface to receive plastering, brushing with neat cement slurry @ 3kg/sqm and removal of debris outside MD land complete all as specified and directed.
14	M&L for grading roof 40mm thick (average) for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) complete all as specified and directed.
15	M&L for 12mm thick screed bed mixed withwater proofing compound in Cement mortar 1:4 (1cement : 4 coarse sand) complete all as specified and directed. Note:- WPC Shall be measured separately.
16	Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick (minimum) water proofing membrane, black finished reinforced with non-woven polyester matt(wt. not less than 150 gms/sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. complete all as specified and directed.
17	M&L for painting two or more coats with aluminium paint of approved brand and manufacture to give an even shade on new surface of APP membrane complete all as specified and directed.
18	Dismantling doors, windows and clerestory windows ( wood) shutter of area 3 sq. metres and below each including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed.
19	Dismantling doors, windows and clerestory windows, Steel rolling shutter of area beyond 3 sq. metres including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed.
20	Supplying and fixing rolling shutters size 80x1.25 mm M.S. laths with 1.25 mm thick top cover of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 complete all as specified and directed.
21	M&L for ball bearing for rolling shutters complete all as specified and directed.
22	Extra for providing mechanical device chain and crank operation (exceeding 10.00 sqm and upto 16.80 sqm in the area ) for operating rolling shutters complete all as specified and directed.
23	Supply and fixing factory made uPVC white colour Casement door and frame with 3D hinges made of (bigseries) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing/gauged door shutter bead of appropriate dimension. Comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed. (Glass shall be paid separatelyand includes all other connected accessories.) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
24	Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.4 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wire mesh shall be paid separately and includes all other connected accessories.) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
25	M&L for factory made single extruded WPC (Wood Polymer Composite) solid doorFrames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with and including M.S hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
26	Frame size 65x100 mm complete all as specified and directed.
27	Frame size 65x125 mm complete all as specified and directed.
28	M&L for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
29	M&L for factory made single extruded WPC (Wood Polymer Composite) partially/ glazed/gauged door shutter of 35 mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: wire gauge/glass,stainless steel butt hinges and necessary S.S screws shall be paid separately).
30	Supply and fixing factory made uPVC white colour fixed glazed/gauged ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 m.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass/wire mesh shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
31	S&F Sheet glass of thickness 5.5mm, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.
32	S&F Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading, etc as per site complete all as specified and directed.
33	S&F Toughened glass 10 mm thick as in hinged doors, partitions automatic doors, windows and similar work including cutting to shape, drilling holes required complete all as specified and directed.
34	S&F IS : 12817 marked 125x64x2.50 mm stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete all as specified and directed.
35	Providing and fixing bright /matt finished 125 mm long Stainless Steel handles of approved quality & make with necessary screws etc complete all as specified and directed.
36	Providing and fixing 300 x16mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. (Copper oxidized as per IS 1378) complete all as specified and directed.
37	Supply and fixing 200x10 mm Stainless Steel tower bolts, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.
38	Supply and fixing bright finished brass hanging type floor door stopper size 150mm with necessary screws, etc. complete all as specified and directed.
39	Supply and fixing bright finished brass helical door springcomplete all as specified and directed.
40	Supply and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and directed.
41	M&L for M.S. grills of required pattern fixed to openings /wooden frames with raw plugs screws etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete all as specified and directed.
42	Supply and fixing 20 mm diameter brass curtain rods of wall thickness 1.25 mm with two brass brackets (for each window) fixed with brass screws and wooden plugs etc. wherever necessary complete all as specified and directed.
43	Dismantling tile work any size(for thickness of tiles 10 mm to 25 mm) in floors and wall laid in cement mortar including stacking material within 50 metres lead complete all as specified and directed.
44	M & L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in floor finishes to receive tiles complete all as specified and directed.
45	M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and as directed.
46	All as per item above but as in vertical surfaces such as skirting, dado, etc over & including 10 mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados complete all as specified and as directed.
47	M&L for 450x300x7 to 8mm 1st quality ceramic glazed tiles of approved size conforming to IS : 15622of approved make in all colours, shades of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and as directed.
48	Demolishing cement concrete 1:3:6 or richer mix (i/c equivalent design mix )manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed.
49	M&L for making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.
50	M&L for laying in position cement concrete of 1:2:4type B1(1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) as in floor base drain and surface channel without using extra cement .complete all as specified and as directed.
51	M&L for glass strips40 mm wide and 4 mm thick in joints of terrazzo/ cement concrete floors complete all as specified and directed.
52	M&L forPolished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over & including 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing ,polishing and dismantling old tiles etc. all complete as specified and directed.
53	Chipping of unsound/weak concrete material from slabs, beams, columns, chajja etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
54	75mm average thickness complete all as specified and directed.
55	50mm average thickness complete all as specified and directed.
56	Providing, mixing and applying Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved makeon chipped portion of RCC complete all as specified and directed.
57	Supply and injecting epoxy injection grout in concrete/RCC work of approved makegrout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure includingprovision, fixing & cutting of nipples after curing etc. complete all as specified and directed. (The payment shall be made on the basis of actual weight of approved grout injected.)
58	M&L Drilling Upto and including 12 mm dia hole in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make including necessary form work but excluding the cost of reinforcement, complete all as specified and directed.
59	S & F TMT bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding complete all as specified and directed.
60	M&L for reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.
61	M&L for use & waste of form work including strutting, propping etc. and removal of form work in suspended floors, roofs, landings, balconies, chajja etc complete all as specified and directed.
62	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.
63	M & L for Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 built in CM 1:6 in drains and walls complete all as specified and directed.
64	Dismantling 75 mm dia pipe asbestos/PVC drain /rain water pipe with fittings and clamps including stacking the material within 50 metres lead complete all as specified and directed.
65	Dismantling 100 mm dia pipe asbestos/PVC drain /rain water pipe with fittings and clamps including stacking the material within 50 metres leadcomplete all as specified and directed.
66	Supply and fixing on wall/floor face 75 mm diameter unplasticised Rigid PVC rain/waste water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.
67	Supply and fixing on wall/floor face 110 mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.
68	Supply and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
69	110x110x110mm single tee with door complete all as specified and directed.
70	75x75x75mm single tee with door complete all as specified and directed.
71	110mm bend of 87.5° complete all as specified and directed.
72	75 mm bend of 87.5° complete all as specified and directed.
73	110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
74	Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed.
75	Supply and placing on terrace (at all floor levels) HDPE water storage tank triple layer, IS : 12701 marked, 1000 Ltr capacity with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed.
76	Supply and fixing PTMT Ball cock 25 mm nominal bore, 152 mm long, weighing not less than 440 gms of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball complete all as specified and directed.
77	Supply and fixing in repair gun metal gate valve of 25 mm nominal bore each with C.I. wheel of approved quality (screwed end) complete all as specified and directed.
78	Dismantling 25 mm G.I./ CPVC pipes fixed on wall (exposed) including stacking of pipes within 50 metres lead complete all as specified and directed.
79	Dismantling20 mm dia G.I./ CPVC pipes concealedincluding stacking of pipes within 50 metres lead complete all as specified and directed.
80	M&L for Chlorinated Polyvinyl Chloride (CPVC)20 mm outer dia. SDR 11 pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing, including jointing of pipes & fittings with one step CPVC solvent cement including cutting chases and making good the same fixed on wall (exposed) including testing of joints complete all as specified and directed. (Concealed work)
81	M&L for Chlorinated Polyvinyl Chloride (CPVC) 25 mm outer dia. SDR 11 pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing, including jointing of pipes & fittings with one step CPVC solvent cement including cutting chases and making good the same fixed on wall (exposed) including testing of joints complete all as specified and directed. . (External work)
82	Dismantling W.C. Pan of all sizes including all fittings and disposal of dismantled materials i/c malba complete all as specified and directed.
83	Supply and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.
84	Supply and fixing in repair ABS (Body) health faucet with flexible tube upto 1 metre long with necessary fixing arrangement of quality for 15mm bore connection complete all as specified and directed.
85	Supply and fixing White Vitreous china Orissa pattern W.C. squatting pan (Indian type) of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.
86	Supply and fixing in repair white vitreous china flat back half stall urinal of size 580x380x350 mm with 5 litre white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required including dismantling of old urinal with all fittings complete all as specified and directed.
87	Supply and fixing in repair White Vitreous China wash basin of size 550X400 mm with C.I. brackets, single 15 mm C.P. brass fancy type pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including dismantling of old WHB with all fittings complete all as specified and directed.
88	Supply and fixing 32mm P.V.C.Semi rigid waste pipe for wash basin complete all as specified and directed.
89	Supply and fixing in repair 600x450 mm bevelled edge mirror of superior glass (of approved quality) minimum 4mm thick complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.
90	Supply and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete all as specified and directed.
91	Supply and fixing in repair 15mm nominal bore with 45cm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour complete all as specified and directed.
92	Supply and fixing in repairs 15mm nominal bore C.P. brass angle valve of approved quality conforming to IS:8931 complete all as specified and directed.
93	Supply and fixing in repairs 15mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 in repairs complete all as specified and directed.
94	Supply and fixing in repairs 15mm bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 complete all as specified and directed.
95	Supply and fixing in repairs 150mm dia C.P. brass shower rose with 15 or 20 mm inletcomplete all as specified and directed.
96	Supply and fixing circular 100mm nominal dia PTMT grating of approved quality and colour complete all as specified and directed.
97	Supply and fixing in repair PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete all as specified and directed.
98	M & L for 75mm dia outlet PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
99	Supply and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms complete all as specified and directed.
100	M&L for writing letters with black Japan paint of approved brand and manufacture complete all as specified and directed.
101	Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead complete all as specified and directed.
102	M&L for steel work welded in built up sections/ framed work In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including cutting, hoisting, fixing in position using structural steel etc as required all complete all as specified and directed.
103	M & L for 2 coats painting with synthetic enamel paint of approved brand and manufacture to give an even shade over a coat of ready mixed red oxide zinc chromate primer of approved brand and manufacture on new iron/steel works complete all as specified and directed.
104	Dismantling precast concrete or stone slabs in walls, partition walls etc thickness above 40mm and upto 75mm. including stacking within 50 metres lead complete all as specified and directed.
105	Providing, hoisting and fixing precast RCC work in cover slab, string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centring, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.
106	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, to a distance exc 250 m but not exc 500 mincluding all lifts involved complete all as specified and directed.
107	M & L for 100 mm plain cement concrete flooring with 1:2:4 mix type B2 using 40mm graded aggregate as in flooring including finishing complete all as specified and directed.
108	M&L chequered precast cement concrete tiles minimum 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with medium shade pigment using 50% white cement 50% Grey cement to match the shade of tiles, including rubbing and cleaning etc. complete, over & including 20 mm thick screed bed of cement mortar 1:4 complete all as specified and directed.
109	M & Lfor Rendering 15 mm thick cement plaster on external surfaces of brick work in CM 1:4and surface to be finished even & smooth without using extra cement complete all as specified and directed.
110	Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, exhaust fan, call bell) complete, (fittings such as switches, ceiling roses, call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified and directed.
111	M&L for point wiring (light, fans, exhaust fan, call bell) with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, FRLS ,with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, with piano type switch, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick and brass screws with cap washers for one light/Fan point controlled by one single way05 A switch including all necessarywall cutting and making good disturbed surface complete all as specified and directed. Note- rate inclusive ofsteel box, hylum sheet, PVC conduit pipe and Piano/bell switch.
112	M&L wiring for 05 Amp same switch socket board with PVC insulated unsheathed stranded FRLS copper conductor cable of size 2x1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1x1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring including all necessarywall cutting and making good disturbed surface complete all as specified and directed.Note-The cost of switch, socket not included in the quoted rate & will be measured and paidseparately.
113	M&L wiring for05 Amp Independent switch socket board with PVC insulated unsheathed stranded FRLS copper conductor cable of size 2x2.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1x2.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring including all necessarywall cutting and making good disturbed surface etc complete all as specified and directed.Note-The cost of Steel boxes, hylum sheet ,switch, socket not included in quoted rate & will be measured and paidseparately.
114	M&Lwiring for power plug for 15 A Independent switch socket board with PVC insulated unsheathed stranded FRLS copper conductor cable of size 2x4 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1x4 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring including all necessarywall cutting and making good disturbed surface complete all as specified and directed. Note-The cost of Steel boxes, hylum sheet ,switch, socket not included inquoted rate & will be measured and paidseparately.
115	S& F metal boxes of size 100mm x100mmx 60mm deep of thickness 1.2mm on surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces for 05A socket board complete all as specified and directed.
116	S& F metal boxes of size 150mm x75mmx 60mm deep of thickness 1.2mm on surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces for15A socket board complete all as specified and directed.
117	S&F Socket outlet3 pin, 5 Amps flush type 240 Volt.(for same and ind board) complete all as specified and directed.
118	S&F socket Outlet, 5/6 pin 15/16 amps flush type 240 Voltcomplete all as specified and directed.
119	S&Fswitch 5/6 Amps flush type 240 Volt complete all as specified and directed.
120	S&Fswitch 15/16 Amps flush type 240 Volt complete all as specified and directed.
121	Supply and fixing including connection of call bell AC 230 Volt single pole complete all as specified and directed.
122	Supply and fixing of 3 way, 5A ceilings rose, surface bakelite 65 mm x 50 mm complete all as specified and directed.
123	Supply and fixing of Step type electronic Fanregulator 120/280 V socket type on the existing phonolic laminated sheet etc as required as existing type and size complete all as specified and directed.
124	Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement. complete all as specified and directed.
125	M&L Sub main wiring usingtwo runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4 Sqmm and one run of 4 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including at least 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including taking down old submain wiring with fittings & fixtures complete all as specified and directed.
126	Supply and fix LED tube light fitting 1x20 Watt decorative batten with AL housing sleek and seamless profiled extruded aluminium batten with efficient diffuser to illuminate work and offices spaces, with all accessories complete all as specified and directed.
127	Supply and fix LED tube light fitting 10 Watt, 2 ft decorative batten with AL housing sleek and seamless profiled extruded aluminium batten with efficient diffuser to illuminate work and offices spaces, with all accessories complete all as specified and directed.
128	S&F in repairLEDBldg security light fitting 35/36 Watt, IP 65 with all accessories, (with extra driver) attractively styled high pressure die cast housing acting as a heat sink housingepoxy powder coated in dark graphite greycolour complete all as specified and directed.
129	S&FMCB DB double door made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces, including taking out old DB with fittings & fixtures complete all as specified and directed.
130	Supply and fixing of MCB DB double door made of sheet steel phosphates power painted with bus bae neutral link, earth bar and din rail TPN 4 way with 200 Amps rated bus bar 415 Volts including taking down old one with all accessories complete all as specified and directed.
131	S&F MCB 06 to 32 Amps SP;\"C\" Series, complete all as specified and directed.
132	Supply and fixing MCB 06 to 32 Amps SPN;\" C\" Series, complete all as specified and directed.
133	Supply and fixing MCB 40 Amps SPN;\" C\" Series complete all as specified and directed.
134	Supply and fixing Isolator 100 Amps TPN 415 volt complete all as specified and directed.
135	Supply and Fix 100 AMCCBs, 25 KA 4 pole, 415 volt complete all as specified and directed.
136	Supply and Fix MCCBs Enclosure to accommodate 100 A MCCBs complete all as specified and directed.
137	Supply and Fix wall mounted Cu Bus bar chamber 4 way, 200 A rating with enclosure complete all as specified and directed.
138	Supply & fix exhaust fans steel body AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed.
139	Disconnecting electrically and dismantling of ceiling fans/wall mounted fans of any make capacity and type, washing thoroughly of bearing /bush, fan blades and body of fan by kerosene /petrol etc andgreasing for smooth functioning. Replacement of worn out/defective unserviceable parts and copper wire for winding (where ever necessary), reassembling the same including provision of three core flexible copper wire 1.5m long, including one coat ofsynthetic enamel paint (first quality) with super glossy finish to fan body and blades refixing the same to its original position including testing complete all as specified and directed.
140	Disconnecting/taking outExternal and Internal unit of AC of any capacity and make from wall after collecting Refrigerant from External unit. Refixing the same after servicing of AC and re-filling of Refrigerant and other connected accessoriescomplete all as specified and directed.
141	Supply and fixing in repair of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm including painting with two coats of Black Japan on clamps complete with nut, bolt, washers complete all as specified and directed.
142	M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth strip 32x6 mmby means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc including taking out old un-serviceableearthing, complete all as specified and directed.Note: (i) The concrete pit shall be PCC 1:3:6 type C-1, 40mm thick pre-cast cover slab of RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, reinforced with 8mm TMT bars @ 10 cm c/c on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No. 3 of MES SSR Part-I., (ii) Item includes the cost of GI pipe up to 7.5mfor protection of earth strip and 32X6 mm GI strip up to 7.50 m length (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.
143	supply and fixingfor decorative LED post top fittings of capacity 45 W decorative post top for 360 degree indirect light with IP 65 protection ,designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, opal covers offering soothing uniform illumination for different applications with all accessories complete all as specified and directed.
144	M&L for Taking down existing post top fitting complete all as specified and directed.
145	Taking down existing UG cable of any size and type from trench by excavation and return filling of soil including removing of surplus soil complete all as specified and directed.
146	Supply, Laying, testing and commissioningofcable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size35 sqm 3.5 core (for bldg. P-528 &P-529) complete all as specified and directed.
147	Supply, Laying, testing and commissioningofcable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size25 sqm 4 core (for bldg. P/280) complete all as specified and directed.
148	Supply, Laying, testing and commissioningofcable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqm 4 core (for gate light from existing street light for 3 bldgs.) complete all as specified and directed.
149	Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in soft soil for laying pipes complete all as specified and directed.
150	Returning and filling in soil, including spreading, levelling watering and well ramming layer not exc 25 cm thick complete all as specified and directed.
151	Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
152	M&L for sand covering/cushioning for under ground cable protection complete all as specified and directed.
153	M&L for burnt clay bricks sub class ‘B’ laid perpendicular over & cushioning for cable protection complete all as specified and directed.
154	M&L for galvanized iron tubing medium grade 40mm bore for protection of cable earth lead etc including excavation & returning filling in complete all as specified and directed.
155	M&L for 25 mm X 5 mm G.I. strip in G.I. pipeincluding connection with G.I. nut, bolt, spring, washeretc as requiredcomplete all as specified and directed.
156	M&L forG.I pipe 25 mm dia nominal bore complete with G.I. fitting includingreturning filling in etc complete all as specified and directed.
157	S&F gun metal gate valve with C.I. wheel 25 mm dia nominal bore of approved quality (screwed end) complete all as specified and directed.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Repair Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair Of Building No P/528 P/529 And P/280 At Pxe Chandipur Under Ge (I) R And D Chandipur, Chandipur-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair Of Building No P/528 P/529 And P/280 At Pxe Chandipur Under Ge (I) R And D Chandipur, Chandipur-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us